Cs6 install does not see internet connection

Okay, I got Adobe Master Collection CS6 from the school IT dept as part of my program at Sheridan.
It installs okay but when I try to activate it says it cannot connection to my internet connection; which I know is up and running because that's how I'm posting this. I can use the activation response code by going the offline route, but I have to enter it every time I want to launch one of the apps. How do I fix this so I can activate on-line and get rid of this problem?
Thanks.

Have a look here, in particular
3. Check your hosts file.

Similar Messages

I am having problems opening images renerated in lightroom5 into cs6. Cs6 bridge does not see the lightroom libarary. If I open lightroom and right clik the image, edit in cs6, 6 opens but the picture doesnot follow. What is going on? Give me a hand.

I am having problems opening images renerated in lightroom5 into cs6. Cs6 bridge does not see the lightroom libarary. If I open lightroom and right clik the image, edit in cs6, 6 opens but the picture doesnot follow. What is going on? Give me a hand, thanks.

What edition of LR 5? What edition of ACR does PSCS 6 contain. If they are not parallel (same edition number x in [5 or 8].x ), is LR making a tiff or psd rendition of the image?

Is there a way of transferring a purchased app from my iMac to my MBA if the MBA does not have internet connection?

I am relatively new to the Mac world, and so please excuse me if this sounds like a dumb question. I have a iMac running 10.6.8 and hard wired, not wireless.
I recently purchased a MAB with the intention of NOT hooking it to the internet but just stand alone, for writing purposes. I needed an app for it, so I purchased it through the app store on the iMac with the intent of transferring to the MAB via flash drive. Now in retrospect, its probably not the way its supposed to happen, due to licence rules, etc. Does anyone have any suggestions on how I can get the app on my MAB or will I have to get it online to do a transfer from the iMac?
Thank you in advance your suggestions.

Apple is relying heavily on the Mac App store to make purchases and install applications. Of course, this requires an Internet connection for all purchases and installs. If you connect the MBA to the App store online, you should be able to download an install an additional copy, provided the MBA and the iMac share ownership information (registration, Apple ID).
Apple's long term plan will just about require all systems to have Internet access to function in app installation and updating, if you buy the Apps from Apple..
Alternatively, some Apps can be copied in whole, by simply copying the particular App folder in the Applications folder of your iMac system, then pasting that App folder in the corresponding Applications folder on your MBA. The rest can't. The reason; they install library and other files elsewhere on the computer. It all depends on the Developer's structure of the App.
You can try the App file copying, and if it does not work, you will simply have to establish an Internet connection for your Air, and use the App store.

Macbook does not see share connection of iphone

HI All,
Thanks in advance for your support. My Macbook will not see my iphone "share internet connection" so that I can use my data subscription with my computer. My IPAD sees and connect without problem, but my Macbook Pro (Sept 2012) will not see the iphone network. My macbook air does (July 2012). Any idea what is happening, many thanks.

https://discussions.apple.com/message/15247487#15247487

[SOLVED] New install does not see SSD drive

Ok, I have a DFI motherboard which at first did not recognize my new Intel SSD drive I have installed. After updating the BIOS, it now correctly recognizes it. However when I run the 2009.2 cd and try to prepare the drives, it does not show any drives listed?
/sbin/fdisk -l
does not show any drives either so it looks like arch cant see any installed HD's which makes since, but the motherboard does show the new Intel SSD as a Sata drive right under my DVD player?
Any help?
Edit: I hooked up my old Seagate drive and it shows up fine. Any idea on why this SSD is not playing nice?
Solved: I have come to the conclusion this has nothing to do with the Arch install, but is simply a hardware issue with my motherboard. I installed the SSD drive in my wifes pc, it seen the ssd as a sata drive while booting, it seen it when arch was initializing, it seen it when I did a fdisk, and when i finally tried to install, it was there too!!
So there must be some issue with my old DFI MB. I will work on that or upgrade..Thanks to everyone who helped out...
Last edited by banshee28 (2009-02-28 16:48:07)

lilsirecho wrote:
I had trouble with my throttle device not making contact with the data lines when connected to USB.
I assume the SSD has the same connector as the motherboard and the cable can be reversed end to end to test for performance.
I use a multimeter to verify the presence of power to the device.
Sata cables are known to be flaky.
Throttle devices use 5vdc power from USB connector and are connected to esata cables at the same time since sata ports do not supply power. The connections for throttle are on opposite ends of the device.
I am not familiar with the SSD power setup but assume it is 5vdc as well.
No other suggestions here..................
Yes, the cable should be able to be reversed as the ssd drives are identical compared to normal sata drives in respect to the cable connections: one sata data connection and one power. I will try some different cables and see if that helps. I did try a new port on the mb which did not work, and when i used the current cables on my older seagate drive it worked fine
Last edited by banshee28 (2009-02-26 13:15:52)

Win7 install does not see new hard drive (640gb Samusung) on MacBook Pro

Replaced MBP 5,4 (mid 2009) hdd with a Samsung HM641JI 640gb drive. OS X installation went fine using SL install disk, updated software to 10.6.4. Problem is with Windows 7 installation using Boot Camp. Partition is created (tried 32 to 300 gb). Windows 7 install disk loads but after "Install now" and accepting license agreement, it does not recognize the drive or any partitions. XP install works fine. Had same Win7 problem with 2 identical hdds and 3 different install disks which were full version, not upgrades. Installed Win7 using boot camp on 320 gb Samsung drive (also 3.0gb/s SATA) without a problem. Tried formatting the bootcamp partition on the 640 gb drive to NTFS, but still not recognized. Any suggestions?

Odd you can't see anything. I'd use Windows 7 recovery tools to do a full initialize and map out bad blocks if necessary. Or initialize from OS X drive and then do full slow format etc from Windows DVD.
Every drive vendor has their own linux/dos/windows utility to recertify and test sectors and does a better job than anyone else's. WD Lifeguard for all my WD drives, can be very handy.

Easylink does not detect internet connection

Please help. I have a wireless G broadband router model wrt54g. I've had it for about a year in a half and used it maybe twice. I just ran the setup and got an error saying easylink does not detect your internet connection. I went on line to make sure I was connected and followed the steps to resolve this issue. I got a message saying congratulations your router was configured succesfully but you are not yet connected to the internet. I went online to try and get help with this issue and downloaded firmware. My comptuer won't even allow me to run the download, it just does nothing when I click on it. Could someone please advise me as to how to get this router to detect my internet connection. Thanks

Who is your Internet Service Provider..?
Are you getting the internet connection,when you connect the computer to the modem directly...?
If your Internet Service Provider is Cable follow this link
If your Internet Service Provider is DSL follow this link

Suddenly, my iPad does not have internet connectivity

Despite strong wifi signals - a 4 bar icon at the top left on my Ipad and iTouch - both on my home network and on the network at a friends, my iPad (IOS 4.3.1) and my 2nd gen iTouch (IOS 4.1) both tell me that I am not connected to the Internet. Nor can I send or receive e-mail.
I have reset network setting; I have renewed the lease and have also fogot the network. I have powered off and then powered on. All to no avail.
I am typing this on my wireless G4 Powerbook while connected to my home system, so the problem does not seem to be with the router.
Hopefully this forum can help me solve this.
Thanks.

Quick inquiry. When you go to Settings/General/Network/Wi-Fi and tap the arrow to the right of the network your iPad thinks that it is connected with, what is the IP address? Is it a 169... IP? If so the iPad is not really connected to anything. It has timed out waiting on the router to supply it with a connection and supplied it own self assigned IP.
Carolyn has given you a link to all of Apple's best knowledge Base articles on Wi-Fi, and each of them are often links to more.
I hope that you sort it out.
Dah•veed

WRT150N v1.1 does not recognize internet connection

I have had this router stored since I have never been able to get it working, but today I want to try everything possible, and I have, i upgraded the firmware, i backed up the the configurations, restored the configurations, i power cycled, everything that those pages from linksys support show you, but still easylink advisor does not recognize my internet connection, i am obviously online since i am on this page, so I don't know what it is.
Solved!
Go to Solution.

There is nothing wrong with your router, you should Update Linksys Easylink Advisor

Aperture does not recognize Internet connection with SmugMug

When I try to add an account for SmugMug, the Accounts dialog box shows, "Your computer is not connected to the Internet. Aperture needs an Internet connection to login to SmugMug."
I added a Flickr account with no problems. How can I get Aperture to recognize that I have an Internet connection for SmugMug?

jscorbin wrote:
** Workaround **
The problem appears to be with some routers in the network -- for example my Netgear R6300. When I hooked my iMac (running Mavericks) directly to the cable modem with an Ethernet cable, Aperture was able to authenticate with the SmugMug service (using Safari). The Apple Professional Applications technician suggested trying that, and it worked.
After replacing the original network configuration, where the iMac is connected through the Netgear router, Aperture maintained the SmugMug shared service, and I was able to upload and download photos with SmugMug.
Confirmed that this insane workaround did work. ***, Apple and/or SmugMug? This should be fixed. It doesn't jive with Apple's "ease of use" software mantras.
BTW -- I have a Netgear WNDR4500 v1 in between the world and my Mac.
IronChefMoto
Message was edited by: IronChefMoto

Iweb not seeing internet connection

trying to upload my iweb from my work line as I let it run all night at home and it's half way done...
I'm on line but iweb says I don't have an internet connection?
Is there a fire wall at work I need to fix? I'm using a proxie to get on line....

Thats what is strange... I know others can but for some reason I am unable to. iWeb still says there is no internet connection. Is there a setting I need to apply on my router to allow this kind of access?
I have never had this issue when I was in the States.
I have also found that certain pages are coming up completely jumbled, such as YouTube.
Also, if I hook my MacBook straight to the connection, I can access everything.
Any thoughts?

I installed iTunes on my PC. But, when I connected my iPhone, the iTune does not see the connection. Down loaded iTune several times, rebooted PC. Still having problems. Is there any one with this problem?

I installed iTunes on my PC. When iPhone3 was connected, it would not recognize. Why?

Choose the appropriate link:
iPhone not recognized in iTunes for Windows
iPhone not recognized in iTunes for Mac

Ethernet works, wireless does not. Internet connection issues.

This is my very first post, I hope it will be helpful and save people the grief that I went through.
Yesterday, on Wednesday, for some reason my MacBook "AirPort" would show full bars at the top of the screen but when I opened Safari or iTunes, I had no connection. What's weird is that I had never changed the settings since getting my laptop a year ago and they were locked as well.
I connected through Ethernet cable directly into my WRT54G linksys router and the connection was good. What was strange is that my wife's MacBook had no problems connecting wirelessly.
I tried everything I could think of. Rebooting my computer. Restarting the router and cable modem. Tinkering with the TCP/IP numbers. I updated my OS from 10.6.4 to 10.6.5 and updated Safari and iTunes. Nothing worked.
My wife and I went through every single post on the Apple forum discussions site. We tried some interesting things. Putting a $ character before the password. Changing the DNS server numbers. Doing stuff in the unix console. Changing the time on my computer. Nothing worked.
I booted from the Applications disc that my MacBook came with and did the Hardware Diagnostic Test. No hardware issues, thank goodness.
We tried everything we could think of. Finally, I gave in and called the Apple store closest to me, they transferred me over to Apple Support and I spent 2 hours on hold. I got fed up and called, while still on hold with my phone, with my wife's phone. I got a recorded message, "Sorry our offices are closed." That was quite frustrating to hear.
So I got online through my Ethernet connection and booked an appointment at the Apple store to see a Apple Genius. Went to bed hoping that the next day, I could boot my MacBook and wirelessly connect miraculously.
The next day (today), I gave the wireless connection a try. Same problem. Full bars, no connection.
Off to the Apple store.
At the Apple store, my Genius guy connected my MacBook to their store internet wirelessly and then tested the connection. It worked. Then he ran Disk Utility to verify/repair disk permissions.
Apparently, he says he runs Disk Utility once a week to fix disk permission problems on his own computers. Why would I have disk permission problems when I'm the only user on my own computer? He states that when separate programs are run, they all access user permissions and some programs that are buggy alter these permissions or files when they're not suppose to.
Apparently, according to Disk Utility, that's what happened and my permissions thing could not be repaired.
* * * The **ONLY SOLUTION** was a re-installation of system software. * * *
So, I brought my laptop home and did a re-installation. Reboot your laptop with the boot disc the computer came with, by holding down the "C" key after you turn it on. For some reason it took a few minutes just to boot from the boot disk, it felt like I was holding down the "C" key forever. The re-insall took about 50 minutes.
The problem was FIXED.
The only thing that I appear to have lost are the desktop pictures that I downloaded and put in the Library -> Desktop Pictures folder. Everything else appears normal so far.
I'll be running Disk Utility more often from now on. Apple Genius guy says that Disk Utility should be run after booting from the boot disc because it will be more thorough than running it when booting off your laptop.

So, the same problem occurred and in a relatively shorter time than before. I began to think that something is causing this problem.
My theory is that it is a VMWare software issue. What I've been doing differently recently is using it in "Unity" mode as opposed to "Full Screen" mode. My guess is that the program is modifying my wireless permissions and screwing it all up.
So, what I've done is set the "Network Adapter" to "Host-Only". This denies the VMWare program internet access but still allows file sharing between the Windows virtual environment and the Mac hard drive.
Then I had to re-install Mac OS X all over again to fix the wireless settings/permissions mess.

Does not recognize Internet connection for 1.2.1 update

After updating iTunes to 7.0.2, information tells me there is an iPod update 1.2.1. After I hit either "download and install" or "download only" it informas the of error:
iTunes could not contact the iPod software update server because you are not connected to the internet. Make sure you are connected to the internet"
I am connected! what is the deal?

http://docs.info.apple.com/article.html?artnum=304468

Initial sync between Desktop Manager and 8320 does not recognize internet connection

Am unable to do an initial sync between Desktop Manager and BB Curve 8320. Am getting error The computer must be connected to the Internet in order to initially configure synchronization settings. Please ensure that you are able to connect to the Internet and try again. Tried with version 4.3 and 4.6.0.12. I have a broadband connection that is always on and have also tried wirelessly. Any suggestions are appreciated.

Hi,
First we need to do a clean install of the DM you have on, this will clean up the other installation as well,
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub...
After you are down download DM 4.5 with NO MEDIA MANAGER from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Just for trouble shooting purpose, turn off firewall and virus checkers,
Bring DM, go through the setup wizards, connect your BB and do a BACKUP first
Let me know how it goes!
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Cs6 install does not see internet connection

Similar Messages

Maybe you are looking for