CS6 - Is it possible to rotate multiple objects independent of one another?

CS6 - Is it possible to rotate multiple objects independent of one another? In other words selecting say 9 object in a grid then rotating the all 30 degrees on their own axis.

I forgot Transform > Again won't rotate each layer about its own centre.
It can be done, though. Record an Action of a layer being rotated and followed by Opt+] or Alt+] to target next layer. It should look like the screenshot below. Use it by first running it on the lowest target layer in the stack then running however many more times is required.

Similar Messages

  • Change multiple object properties at one time

    I'm using Universal Designer and I have to manually change the properties of over 100 objects.  Does anyone know how I can change multiple object properties at one time?

    Hi,
    This links may be helpful to you,
    http://forumtopics.org/busobj/viewtopic.php?t=94828&sid=1eb4a78e88c26b14418c354d1321e350
    http://www.forumtopics.com/busobj/viewtopic.php?t=21029
    All the Best,
    Madhu...

  • Is it possible to have Multiple Spool requests in one batch job overview?

    Hi,
    While running one of my z program in back ground, there are two spools generated (one by write statement and one by OPEN_FORM statement and both the spools are available in SP01 Transaction), but when i see the job overview in transaction SM37, I only see one spool request (that of the last spool request). Can any body in the group please tell me is it possible to see multiple spool requests in the job overview of one Abap program and if yes, how?
    Thank you.
    Abinash

    Hi Jayanthi,
    Thank you for the link. But probably that discussion was also an unsolved one.
    Anyway, does any one in the group think that display of multiple spools per one step job is dependent on client / SAP Server setting? Because as evident from the chain of mails in the link provided by Jayanthi, some people say that they see multiple spool requests for one program in batch mode job overview (SM37)? If yes, can some body tell me the required configuration?

  • Possible to connect multiple R3/Systems to one XI?

    Hi,
    is it possible to connect mutiple R3-Systems to one XI?
    How does it work?
    Regards
    Stefan

    Stefan,
    You can certainly connect multiple R/3 systems to one XI.
    1. If your R/3 system release is 4.7 then use point 8 from the configuration guide. (RZ70 transaction collects the system data and creates a technical system in the SLD)
    2. If your R/3 system release is < 4.7 (means 46c or 46B, 40B) then you should create a technical system in the SLD.
    3. For any other SAP product with ABAP stack (including R/3 47 system), you should check the SAP_BASIS release if it is 6.20 you should apply XI Add-on to use XI Proxy adapter. For SAP_BASIS < 620 you cannot have XI Proxy adapter. For SAP_BASIS > 6.20 you do not need any add-ons (from this point onwards it is NetWeaver)
    To find SAP_BASIS release -> SPAM Transaction -> Click on Package Level.
    Then create a business systems for each one of them and import them into the Int. Directory when needed.
    Regards
    Shravan

  • Is it possible to sync multiple accounts to just one account?

    I have 2 accounts and one of them I have all my songs on but i can't seem to buy anymore songs from there because, whenever i try to buy my songs it say answer security questions. I have tried many times to reset them but apple doesn't send me the reset email so i can't buy anything from that account but thats where all my songs are. Then i have my second account it works perfectly and I wonder is it possible to put those to accounts in one good account? Please help.

    No, you can't merge accounts nor transfer content from one account to another account - content will remain tied to the account that downloaded it.
    If you aren't receiving the reset email to your rescue email account (you've checked the spam folder as well as the inbox on that account ?) then contact Support in your country, they should be able to reset them.
    Contacting Apple about account security : Contact Apple for help with Apple ID account security
    If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html
    When they've been reset check that you've spelt your rescue email address correctly (and if necessary change it) for potential future use : Manage your Apple ID primary, rescue, alternate, and notification email addresses
    Or if it's available in your country you could change to 2-step verification : Frequently asked questions about two-step verification for Apple ID

  • Is it possible to combine multiple pdf's into one without saving them onto your computer?

    Hello
    I open pdf's in an application (no add ons for acrobat exist), and want to combine them without having to use time on saving them before merging them into one single document.
    Is it possible to do this without having the files saved onto your computer? I use acrobat x pro.

    I dont think you understand my question. Of course Adobe reader cant combine pdf's, if it could I would not have had to purchase Adobe acrobat.
    The problem I am trying to solve is how to combine pdf files when they are not opened/saved locally on my computer.
    If I make Acrobat the standard program for opening pdf files on my computer - then will it be possible to combine the files that are opened without saving them first?
    I dont have the program installed on my computer now, and have to know this before we purchase it.

  • Is it possible to import multiple Attachments/Files in one Dialog-Step using JavaScript?

    The only Methods I know to import Attachments or File Contents in an interactive Form are
    the Methods Doc.importDataObject() and util.readFileIntoStream().
    Both Methods allow the Selection of just one File.
    1)I need a Technique to allow the User to select several Files in just one Step.
    Does anybody know a possible Solution?
    2)I would like to limit the File-Selection to certain File-Types.
    Is this possible?
    Thanks in Advance for your Help,
    Bernd Urban.

    The only Methods I know to import Attachments or File Contents in an interactive Form are
    the Methods Doc.importDataObject() and util.readFileIntoStream().
    Both Methods allow the Selection of just one File.
    1)I need a Technique to allow the User to select several Files in just one Step.
    Does anybody know a possible Solution?
    2)I would like to limit the File-Selection to certain File-Types.
    Is this possible?
    Thanks in Advance for your Help,
    Bernd Urban.

  • Is it possible to define multiple web services in one project?

    I'd like to publish multiple components within one project as web services. but when I try to create it using the project New menu, it only prompts me and allows me to select one component . So does this mean only one web service can exist in one project?

    Sunil
    Thanks for the prompt reply.
    I think I should have worded my question more clearly.
    I have a project with multiple Java classes. I'd like to convert two of them into web services.
    There are two ways to co this.
    1. I right click on each class and select the Generate J2EE Web Service option. This will work correctly and allow multiple web services to be generated.
    but this is not what I want to do .
    What we are trying to do is to generate web services at the project level. I am following instructions in OTN web services tutorial :
    http://www.oracle.com/technology/obe/obe1013jdev/ws/wsandascontrol.htm
    So , this is what I do :
    1. Right-click on my project and select New from the context menu.
    2. In the New Gallery, expand Business Tier in the Categories list and select Web Services, then select Java Web Service from the Items list. Click OK.
    3. In the Select J2EE Web Service Version dialog, select J2EE 1.4 (JAX-RPC) Web Service, then click OK.
    4. Click past the welcome page
    5. This brings me to the page where I can select the web service and class.
    This is where I am stuck - it seems I can only select one web service here . Unless I am missing something.
    Or should I just repeat the process multiple times - running the wizard once for each class ?
    Thanks for the help.

  • Is it possible to print multiple InDesign pages on one sheet?

    Say I have a 10 page InDesign document. Each page is fairly small. When I go to print out those proofs, can I print all 10 pages on one sheet of paper? Or do I have to copy each layout separately onto a new document to group them? Just to save paper really.
    ID CS3

    Daniel Flavin wrote:
    I agree. That's not gonna happen even with Feature Request...everybody loves drop shadow...
    are you kidding me?
    That horrible drop shadow bar adds no value to thumbnail prints and causes designers to have to trim the prints to the thin line page edge that prints. With the bar under the thumbnail, it interferes with page design decisions, which is really the whole point of printing thumbnails--to save paper while quickly evaluating the design of the page.
    It would also be helpful to have thumbnail print options galore, for printing miniature booklets with pagination controls, etc., for little samples we could give to our clients.
    If the InDesign software engineers would add realistic drop shadow controls for thumbnails, that would be fine. But designers still want the ability to turn off the thumbnails.
    KILL THE WORTHLESS DROP SHADOW BAR AND PLEASE GIVE US MORE THUMBNAIL PRINTING OPTIONS.

  • Multiple objects into single emitter-possible??

    Is it possible to have multiple objects turned into a single emitter to set different ranges, life, scales, etc.? Specifically, I have about two dozen text words I'd like to be able to turn into a single emitter as opposed to doing a separate one for each...thanks for any help!
    ~Chris

    New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
    If we use the forums properly they will work well...
    Patrick

  • Using Multiple Object Types in a FIM Managed Criteria Distribution Group

    Is it possible to use multiple object types in a criteria based distribution group. So when building your criteria filter, "Select (object type) that match (all/any) of the following condiftions". Currently you can only choose 1 object type and
    I want to be able to choose object type "user" and a custom object type I create for my contacts 

    You can create main condition as "any" and later add two sub-conditions - one that object in set "All People" and other sub-condition that object in set "All Contacts" or "All Groups".
    If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

  • Can Multiple Objects be copied into Sales Order??????

    Hi,
    I have created three charecteristics and assigned to a class of class type 001. In the classification view of material master for each material i assigned the class.This assignment is done for calling the object at sales order level.
    I am able to find the multiple objects for single characteristics in sales order but multiple objects are not copied into sales order..only single object is copied into sales order...when i try to copy multiple objects system is throwing warning message as "You can only copy one object in this mode".... Is it possible to copy multiple objects ?? Any answers will be highly appreciated.
    Ramagiri.

    Hi,
    But what's the purpose behind that.Material Class 001 is just only for information purpose only to search the materials with help of class and characterstic.
    If your material is configuable one then you have to use Class type 200 - Material (Configurable Objects) and for the same you have maintain the characterstic value during sales order creation.
    Regards,
    Dhaval

  • Select multiple objects across pages (cs3)

    Hi
    Is it possible to select multiple objects across pages? All objects have an object style attache and have to be moved 0,7 mm to up. Maybe with a script?
    thanx
    S

    OK, the move part was much easier than I had anticipated. I think I was thinking of moving graphics inside a frame (or did they just make it a lot easier in CS3?).
    At any rate, this one does every page in the document. Just change "test" and the move amount to your preferences...
    tell application "Adobe InDesign CS3"
    tell active document
    set myObjectStyle to object style "test"
    repeat with i from 1 to count every page
    tell page i
    select (every item of all page items whose applied object style = myObjectStyle)
    end tell
    move selection by {0, "-0p7"}
    end repeat
    end tell
    end tell

  • Difficulty rotating ms3d object in java 3d

    I've created a few ms3d objects and have managed to successfully load them into my J3d program.
    I'm trying now to rotate this object through user interaction.
    I will start by just getting the object to rotate first and then add the keyboard interaction.
    Is it possible to rotate these objects, and does anybody have any link suggestions
    Thanks

    I've created a few ms3d objects and have managed to successfully load them into my J3d program.
    I'm trying now to rotate this object through user interaction.
    I will start by just getting the object to rotate first and then add the keyboard interaction.
    Is it possible to rotate these objects, and does anybody have any link suggestions
    Thanks

  • How to global replace multiple objects using csm

    Hi All
    I’m new to this forum.
    We use csm 4.6 to manage about 400 cisco firewalls. After a large migration project there are a lot of objects with different names but with the same content. I know you can do a find and replace on a single object on a single firewall policy.
    But is it also possible to replace multiple object for 1 on multiple firewall policy
    Example.
    We have 40 groups named net-1, net-2 , net-3, …. net-40 the content of the groups are the same but their used in different firewall policies. I would like to replace them all in one go on all the firewall which has one of those groups to the new group net-all.
    I’m also looking in a way to delete all non used object in the csm database (hosts, groups, network, services) Is this possible?
    Kind Regards
    Eduard

    Jacob,
    I decided to take one more stab at the logo before uploading it, and I finally figured it out.
    I selected one white shape and one colored shape. In the pathfinder panel, I clicked on the second pathfinder icon -- TRIM. That "cut out" the part of the colored shape that I needed cut out, and it grouped the two items (white and colored shapes).
    I ungrouped the items, then selected the white shape again and the other colored shape. Did this for each shape I needed cut out and now Bob's my uncle.
    Not sure why this didn't work for me before -- I was either selecting the wrong pathfinder icon, or failing to ungroup the shapes after trimming them (before re-selecting the same white shape).
    I've written down the procedure so I can remember how to do it next time!
    Thanks,
    Marlene

Maybe you are looking for

  • What are the exactly characteristics of a "Optimistic Cache"?

    Hey, can someone explain me the exactly characteristics of a "Optimistic Cache". On the Wikipage is a short explanation http://wiki.tangosol.com/display/COH34UG/Types+of+Caches+in+Coherence but for me is this Definition not obvious. for example: "...

  • How to use/create icons with transparent background ?

    I would like to use icons with transparent background on JButtons, but I can't find how to do it. Until now, I've been using the ImageIcon class to create icons from GIF images. These images were created with MSPaint (sorry, I don't know what I could

  • Using table() in select , select .... from .... table( ) where ....

    Hi Folks, I hope someone out there can help me out with this one. It has me stumped: Basically we have an XML document stored in an XMLType which we need to process relationally. I have the following cursor definition: CURSOR c_section13h(cp_jsatfa_x

  • What happened to 'Show Pop-Up Menu' in Dreamweaver CS6?

    I've been using Dreamweaver for several years now and through several different versions. In Dreamweaver 8, under Behaviors, I had 'Show Pop-Up Menu' as a way to create attractive menus. Now in CS6, it is gone. Is there a way to get it back or at lea

  • Pages being rotated

    when I'm creating my master pdf. I am dragging smaller PDF files into the Pages tab. This works, up until today. now when I drag Pdf's in. They get rotated Randomly. 90 or 180. what has changed since yesterday when I left my desk? This must be fixed.