CS6 it is being hanged attempting to change the font property

Hi,
I am working on Flash CS 6 is working fine but one issue i am facing all the time while working on any file whenever i am attempting to change the font property (like from arial or verdana etc.) it is being hanged for few moments like 1 to 2 minutes.
Can help in solving this issue.

You're at the point where you've done every other rational thing to solve the issue. If you have no issue using font drop-downs in any other Adobe or any other app and have reset Flash to defaults, have no font manager or any corrupt settings, I'm out of suggestiong.
Since Flash is basically back to default install status, that's the last recommendation I could make. If you reinstall Flash and you still have the issue, this is something Adobe support may need to jump in on. There has to be a difference between your environment and everyone elses, only you know what that is. If a fresh install of Flash doesn't work, there's an environment issue.
Are you using an encrypted filesystem or have you manually copied any web fonts into your Windows font directory (where typically they're colored green) and have not clicked 'Unblock' on the file? Windows can sometimes mark downloaded files as dangerous until you view the file properties and click to 'Unblock' it. It's down to this level of "some small thing" that's causing this odd hiccup for Flash.

Similar Messages

Visual Studio 2013 crash when I attempt to change the Design Language

I have a localized Windows Forms application. When I attempt to change the Design Language from German to anything else Studio hangs. Where is this setting persisted so I can manually edit the setting outside of Studio? This is in VS 2013.
AliciaV

Hi AliciaV,
Thank you for posting in the MSDN forum.
When I attempt to change the Design Language from German to anything else Studio hangs.
Could you share us a screen shot about the settings where you change the design language? Do you mean that you change it under the TOOLS->Options like the following screen shot?
We often change the default language like the above screen shot.
Reference:
http://msdn.microsoft.com/en-us/library/ms246590.aspx
http://msdn.microsoft.com/en-us/library/kycbhy5d.aspx
If so, the real issue we need to check is that why the VS crash.
To make sure that whether it is your Environment issue or the VS IDE issue:
Please run your VS in safe mode, check it again.
http://msdn.microsoft.com/en-us/library/ms241278.aspx
Please run your VS as the admin.
Please also close other processes or third party tools in your windows, and make sure that your task manager is free. Remove/disable all add-ins in your VS IDE.
Please also install the VS2013 Update 2.
In addition, you also need to make sure that you installed the specific language package:
http://www.microsoft.com/en-us/download/details.aspx?id=40783
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can we change the font in the email that is being sent from SAP ?

Hi,
I have a requirement where in we need to change the font for the contents in the mail being generated from SAP.
I am using the FM SO_DOCUMENT_SEND_API1 to send my mail.And the contents are just appened to an internal table as text elements.
Can we change the font in the email that is being sent from SAP to Arial 10points?

E-mails generated with that function module are created in plain text format. The font that would appear when reading the e-mail would be dependt on the user's setting for the e-mail application (e.g. Outlook).
To my knowledge, the font cannot be affected during it's creation.
Hope this sheds some light on your issue.
-Mark

There was an attempt to change the value of a control that is not visible.

I am getting the below error on submitting on a screen.
"There was an attempt to change the value of a control that is not visible. The submitted value for this control has been discarded."
I am setting the values of the controls in "OnGetScreenEventHandler, OnInvestigationEndedEventHandler" implementation. Is there any way to check if the control is visible?
Thanks,
Rajan

Hi,
How Do I Check for the control Visiblity in the above said event handler?
Here is my code
private void formattAllDate(SessionContext currentContext) {
     log.debug("R2_XSR: Formatting all date");
setGlobalInstanceValue(currentContext,"Date1",formatDate(getGlobalInstanceAttribValue(currentContext, "Date1")));
setGlobalInstanceValue(currentContext,"Date2",formatDate(getGlobalInstanceAttribValue(currentContext, "Date2")));
setGlobalInstanceValue(currentContext,"Date3",formatDate(getGlobalInstanceAttribValue(currentContext, "Date3")));
setGlobalInstanceValue(currentContext,"Date4",formatDate(getGlobalInstanceAttribValue(currentContext, "Date4")));
setGlobalInstanceValue(currentContext,"Date5",formatDate(getGlobalInstanceAttribValue(currentContext, "Date5")));
setGlobalInstanceValue(currentContext,"Date6",formatDate(getGlobalInstanceAttribValue(currentContext, "Date6")));
setGlobalInstanceValue(currentContext,"Date7",formatDate(getGlobalInstanceAttribValue(currentContext, "Date7")));
private void setGlobalInstanceValue(SessionContext currentContext, String attribute,Boolean value){
     try{
          currentContext.getInterviewSession().getRuleSession().getGlobalEntityInstance().getEntity().getAttribute(attribute).setValue(currentContext.getInterviewSession().getRuleSession().getGlobalEntityInstance(), value);
     }catch(Exception e){
          e.printStackTrace();
private String formatDate(String dt){
String newdt[]=dt.split("/");
if (newdt.length==3){
return newdt[1]+"/"+newdt[0]+"/"+newdt[2];
return "";
}

In attempting to change the size of an open window I minimized the dock instead and cant access

In attempting to change the size of an open window I minimized the dock instead and cant accessMinimized dock

I'm sorry, but we don't have any immediate plans to change this... but I would never say never... and we appreciate the suggestion. You might want to register on our Ideas site and post this idea there - http://ideas.acrobat.com - if it gets a lot of votes, it will go up on our list of priorities.
Best,
Michelle

How do I change the font style in After Effects CS6?

How do I change the font style in After Effects CS6?

AE basics: Go to Window>Character or select Workspace>Text
In the timeline, select the Text Layer or in the Comp Panel, with the text tool selected and the layer selected in the timeline, highlight the text you want to change
In the Character Panel, Change the font attributes...
Take a quick look at this short video. You will learn how to find the font panel, change the paragraph style and baseline shift:
Please, since your question tells me you are very new to After Effects start here: Basic Workflow

I can't get into the settings for fonts. How do I do that to change the font size?

I had downloaded the latest updated version of Firefox and I ended up syncing it to my Android phone. I went into some kind of settings dialog and accidentally changed my font and text settings and now I can't read any of my Gmail that's in my account on my desktop computer-it's too small. I'm trying to figure out how I can get into the content settings (I have the print out of what I'm to do once I get into the 'options' on the content settings page, but I don't know how to bring up the content settings menu/page). I use my desktop PC for work purposes and I can't use it with the font and text settings the way they are now. I also read where questions are being answered, but no one knows how to find the answers to the questions people are asking. How do we get to the answers that people give us about the question we have asked?
I hope you can help me ASAP so I can change what I need to ASAP. I work on my pc 24/7 for work and it's not helping me when I can't read emails and I can't fix the problem.
Thanks!

Hi!
I followed the directions that were given to me in this forum. The only difference on my desktop PC computer after you click on the three lines at the top right of the screen after signing into your g-mail account, it will bring up the menu and you click on the 'Options' tab. I'm on G-mail and I'm running windows 7 Home Premium; there wasn't a preference tab and the percentage was already set at 100%. It takes you straight to the options menu. You then click on the 'Content' tab if it's not already open, change your font and font size to what you want, and then click OK. It reset those items for me and now I can read my emails. I noticed if you change the font type and size to something other than Times New Roman-size 16 (default font & size), you may have to change the size of font to a higher number (i.e. Arial-18 font size). You just have to adjust them for your preference if you want something other than Times New Roman-font size 16.
Thanks for the help and info. It worked.
Upset2

How do I change the name property of a file in a document library?

I am trying to come up with an Event Receiver that will change the name property of an file when it is uploaded. For instance when a file is uploaded into a document Library, currently the Title is being generated (which is fine)...I want to be able to
change the "Name" property from whatever it is, to match exactly what is in the "Title" property. Are there any sample codes/blogs out there that I can take a look at? Has anyone had any experience doing this? It seems like something
that should be straight forward, to change the "Name" property to match what is in the "Tilte" property.

Hi,
You can try the code below which use the SPFile.MoveTo() function to change the name of the file.
EventFiringEnabled = false;
SPFile f = properties.ListItem.File;
string spfileExt = new FileInfo(f.Name).Extension;
f.MoveTo(properties.ListItem.ParentList.RootFolder.Url +
"/" + properties.ListItem["Title"]+ "_new" + spfileExt);
f.Update();
EventFiringEnabled = true;
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/5cafb8e4-bb85-4147-9bda-4ab42a4d4817/sharepoint-2013-event-receiver-to-rename-files-not-working?forum=sharepointdevelopment
A link about rename uploaded file using Event Receiver for your reference:
http://paulgalvinsoldblog.wordpress.com/2008/01/25/quick-easy-rename-uploaded-file-using-sharepoint-object-model-via-an-event-receiver/
Best regards
Patrick Liang
TechNet Community Support

How to change the font for a PE51 form

Hi,
We are on ERP 2005 , MSS 1.0. A custom remuneration form has been created for printing paychecks. The same form is being used in ESS for employees to view their salary statement. However, the form displayed is not aligned and does not fit in the ESS window.
It seems there might be a need to change the font and then resize the columns using PE51. How can the font be altered in a form that has been created using PE51. Also if there is any other way outside the form ( BADI etc) where the font can be controlled ?
Thanks,
Mark.

The Password is stored in the keychain, likely the system keychain. Use Keychain Access to edit them.
You can also remove that network from the list of preferred networks. Select it in the List under WiFi tab in Network System Preferences. When you first enter Network, select WiFi, then click Advanced.
When you try to connect again, it should ask for a password. If not, go to Keychain Access, find the network password entry, and delete it. Then try to connect again.

How do I change the font in interface of korean version?

Hi. I'm a korean user of illustrator korean version. And, i used to use previous version CS6 and changed to CC. And, I realized that the font in interface changed compare to previous version. Previouis font was gothic and CC's serif font. And, CC's hard to see and indentify. So, I'd like to change the font in interface. How can I change it?

I would take screenshots for comparison and post your issue here:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en

How can i change the font color in TextArea ?

I want to change the font color in text area or text field
i'm not using swing (i'm using only AWT)
so don't show me solutions in swing because it won't help me.
is it possible anyway?
thanx

Hi,
Have you tried the following ?
yourTextArea.setBackground(yourColor);with yourColor being a Color object.
BadLands

How can I change the fonts and layout of the blog?

I would like to change the font and font size of my blog. How can I do that so that it stays that way for each new post?

I can't seem to find a way to change the font in the main blog page in iWeb itself... So that's how iWeb blogs normally behave... They don't take the font settings you put in in the entry and they display only one image.
The first (main) Blog page is thought of being an index page and not an actual page where people read the whole post. It's just a page that shows people how many and which entries there are. Then people choose to read the entry by clicking on it.
You might think of reducing the size of the pictures and the length of the text excerpts. So that people click to read more and see the whole entry with all images.
If you don't like the idea of the index blog page and people going into the entry to read you might think of using something else than iWeb to blog...
Regards,
Cédric

Change the font on a continuous form

I am using a continuous form that lists step by step instructions. There is a checkbox that they check to indicate when a step in those instructions can not be executed. I want to change the font only on those lines that have been checked.
Is this possible?

I am using a continuous form that lists step by step instructions. There is a checkbox that they check to indicate when a step in those instructions can not be executed. I want to change the font only on those lines that have been checked.
Is this possible?
As Razerz post says.
Since nobody has any idea what control those lines are displayed in and what checkbox capability is being used with those lines it's pretty much a guess on how to assist you.
Any control that contains text can have its font changed. But if all the steps are in one control, like a richtextbox, then then a particular steps text may have to be selected and have its font altered.
I suspect you could alter the Font and Forecolor of the control or text so the step text is more noticeable than just altering the font perhaps.
Also in an open post that you are editing there is a toolbar at the top. To the right of the letters HTML is a square button used to insert a code block for copying and pasting code in. It will place the code block at the last location in the post your caret
was at when you select that button, select the language, copy/paste your code, preview then insert.
La vida loca

Is it possible to change the font size of the PO terms only in the email?

Hi all,
Is it possible to change the font size of the PO terms only?
We are emailing PO and terms to the Suppliers.
Is it possible to reduce the font size on terms only so that the file size is smaller and easy to print on the supplier end?
TIA

Are we talking out Purchase Order PDFs here.
If you are mailing PDFs I think you can take a look at the XSL FO Stylesheet which is being used to generate the PDF for a PO.

Change the font of ***ALL*** GUI???

I thnk setFont() to each component isnt the best solution.
Maybe there's another??
UIManager's put()???? But what to put??
Maybe another way?
Thanks in advance, Boris.

Create a new Theme for your application or use UIDefaults.put(key, object). When using the UIDefaults, do it at the beginning of the application so it takes effect as the UI is being built.
If change the UIDefault while the app is operational then call SwingUtilities.updateComponentTreeUI(a component) to update the look of the app.
ICE

CS6 it is being hanged attempting to change the font property

Similar Messages

Maybe you are looking for