CS6 just stopped working last night.
PS CS6 Extended just stopped working over night and so has my version of CS5.1. I have a trial of CS6 Master Suite going and they are all dead too, and no the trial isn't over.I don't even get a flash screen. Actually I got bridge to open and it asked me to install ACR6.7??? I have LR 3&4, Element/Premiere 10 and they are fine. I have wiped my MAC twice with the CS cleaner and have spent the entire day on chat help and the phone. Nothing is working, any ideas?
Oh and NONE of them will recognise my camera, it's just plain bizarre
Message was edited by: weatherfreak
Oh I have a MacbookPro Early 2011, 8GB Ram 1333Mhz DDR3 , i7 intel core 2.3Ghz, 750MB HD and 4TB external HD. I had noticed how slow it's been running lately too
I suggest you try a factory reset of the hub
http://bt.custhelp.com/app/answers/detail/a_id/11386/~/how-do-i-reset-my-bt-home-hub-to-its-factory-...
If you found this post helpful, please click on the star on the left
If not, I'll try again
Similar Messages
-
face book has stopped working on my I pad. I got to it through Safari as i do on my mac. It works on my mac but stopped working last night on my i-pad
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data (Clear Cache on iOS 4) and also Clear History
If you stillc an't access Facebook via Safari then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
There are a number of Facebook apps (including an 'official' one), which might be better than accessing it via Safari -
BT Infinity - stopped working last night
My BT Infinity connection stopped working last night and BT Home hub is showing green , sometimes flashing green or solid green. Recently I have a a cross line on the phone line intermittently and several small outages of Infinity connection too. Can you help please?
Has the BT Home Hub 4 packed up? Will BT replace this or am I responsible for its cost & replacement? Openreach are coming in a few days.
Can anyone help please.I suggest you try a factory reset of the hub
http://bt.custhelp.com/app/answers/detail/a_id/11386/~/how-do-i-reset-my-bt-home-hub-to-its-factory-...
If you found this post helpful, please click on the star on the left
If not, I'll try again -
My computer pretty much stopped working last night...
Hi! So, last night first my safari stopped working. But iChat was still working. Then I decided to restart my computer. After that nothing would work, and my computer froze when trying to load something.
I finally got it to turn off, and I tried to turn it back on. It makes the noise and I see the light gray screen with the apple and it goes to the blue screen and says "Mac Os X" where normally it would load. It doesn't load anymore.
The only connections to this happening that I can think of is I was doing a few updates the other day and one didn't finish properly, and I remember my widgits not working anymore. I'm not very mac savy (obviously) so I didn't know what to do about it. I should have known there was a problem then.
I really hope I just didn't lose everything that I have done in the last year!!!Welcome to Apple discussions, danegolf11.
Many of the symptoms you described sound like the ones associated with a failing hard drive. If it is only a software problem then you should not be hearing any unusual noises. Can you clarify what kind of noise you have heard - or are you referring to normal the 'startup chime'?
However, before concluding that it may be a hard drive failure, would I be right in assuming that you do not have a backup of your data? If that is the case then the first thing I would try to do is safeguard any valuable data by attempting a backup using FireWire Target Disk Mode - but you will need access to another FW-equipped Mac.
Once you have, hopefully, backed up your data try restarting the PowerBook with the original installer disc (insert disc, restart and then keep the 'C' pressed) and run Disk Utility to check for any problems.
2.0GHz MacBook, 15" 1.25GHz/12" 1GHz PBs, 2xPPC Mac minis, 12" iBook G4, Mac OS X (10.4.8) Cube, 2xTAMs, iPod 4G & nano 2G, 1G & 2G iPs, AEBS, AX -
WRT54G V3 WiFi stopped working last night
I've done a firmware upgrade to latest version v4.21.5 yet my Wifi still isn't broadcasting for my devices to find and connect as of last night (Aug 5, 2012). This hasn't happened before, so I was hoping it would return but still hasn't started working yet.
My iphone just says "unable to connect." Has my router finally called it quits? It is from 2001
Wireless security is WPA2 Personal, TKIP + AES; Mixed mode, Channel 6, SES Inactive, SSID Broadcast Enabled. If those settings help?
Solved!
Go to Solution.Try these trouble shooting steps:
1. Press and hold the reset button on the back of linksys for 30 full seconds. Wait 5 minutes. Unplug the linksys from the electrical outlet for 30 seconds. Plug back in. Reconnect you router to modem and reconfigure except this time, do not enable any security.
2. Try to connect with your iPhone. If it connects, enable you security.
If that doesn't work, then reset the network settings on your iPhone if that is the only device giving you problems. And try again.
If you have ever loaded third party firmware on you linksys such as ddwrt or tomato, you'll need to do a 30/30/30 reset on the linksys. You can search this board for procedure by typing 30/30/30.
But yeah, it could be shot. -
IChat stopped working last night on iPads and Mac
Last night, while using iChat (beta) on my MBP to a friend's iPad, it studdenly stopped sending. She called me to tell me that she suddenly couldn't send from her iPad, so I tried from mine. She can't use iChat on her iPad, I can't on mine, I can't send to iPads or iPhones through iChat on my MBP, but I can use it and chat fine to a PC with a google account. It stopped working, then briefly, it worked, then it stopped again, and hasn't worked for any of us since. iPhone to iPhone works fine. I've gone all through the forums here and haven't seen any buzz about something being down. Any clues?
HI,
iPhoto - Photo Stream.
I had a dial up email account that has been my Apple ID for a long time.
Last year I used this to create an iCloud ID for my iPhone as it went to iOS 5
This gives me two "names" to access the account if I use iTunes or the App Store.
They work as individual Names for iMessages and FaceTime.
I am the person in our house that inherits the old phones at update time
I gained a second iPhone 3GS and I did have the two names split between the two phones.
With iOS 6 I did get the offer to include the Apple ID (iCloud version) to be added to Messages on the Mac (along with the second iPhone Number) I thought I had declined but it does actually appear in the Messages Accounts for the iMessages account although Unticked.
This led me to check which iPhone was using which part of the Apple ID's "Names" and I found one phone was not syncing iPhoto's Photo Stream.
I had thought it was because I had messed up the name somewhere.
I have checked whilst writing this and have had to time Machine some folders back that went missing in iPhoto (only my Daughter's wedding !!!).
Seems it is something I did on my Mac ??
I thought I was on to something that was going to be more helpful.
8:31 PM Wednesday; October 10, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
IPhone 5 wifi stopped working last night
It's worked fine over the last couple of months but last night I went to download a song and couldn't get onto my wifi. I've tried to connect to multiple different networks, some with security and some without but it hasn't worked for any of them. I've turned the phone on and off, restored it to factory setting etc but nothing has worked. Occasionally when I try to connect it gives me a message about the wifi "not giving an internet connection." Is this a hardware issue and should I take it in to an apple store? (Software is all up to date also).
Once you have followed all troubleshooting steps such as backing up and restoring as new http://support.apple.com/kb/HT4137 then it looks like there is a hardware issue with the Wifi antenna and the device needs to be serviced. If you are in your one year limited hardware warranty then the service will not cost you anything so long as you do not have any hardware/liquid damage to the phone. If you are out of warranty please expect to pay $199 out of warranty fee to get the device repaired/replaced.
Best regards!
NOTE: If you do a mail in service for the phone depending on what you set up then there might be a hold on a Credit Card to send a replacement iPhone to you. -
Network magic connection stopped working last night
Really need help with this.
My network magic suddenly yesterday stopped working in that it cannot contact the network magic website. This leads it to conclude that the internet is down, even though the connection is fine. This happened on all three of my computers. My browsers (mozilla and explorer) cannot seem to connect to the network magic website either. A product re-install on one of the computers went fine, but the problem still persists, despite a re-boot. Examined the hosts file manually and there are no entries that might cause a problem. The computers use different service provides and a different router. All three are vista ultimate 64 bit with service pack 2 (recently installed), have spyware doctor, spybot, and live care for security tools (as well as network magic). The live care firewall has the correct permissions for network magic. The network magic platform service is running properly.
Of course I cannot contact the network magic support team as I cannot access the website - this does not appear to be a known problem (did a search).
PeterPeter,
Not only the Network Magic connection stopped, but if you try to connect with your Net2Go remote access website it's not there anymore. Not even if you try to connect with your computer that's hosting it.
As I understand it, when Cisco aquired Pure Networks they issued their last upgrade, and with it came the announcement that the latest version would no longer have the Net2Go feature. Indeed, they could choose to END Net2Go at their discretion. It would seem that this is the case. A shame, really. My clients have come to depend on being able to retrieve their material and email links to their clients as well. All Cisco had to do was provide a redirect, how much server power can that take up anyway? It was almost like having a web site, and it cost nothing. Sure was nice.
According to the End-Of-Life protocols as laid out by Cisco, they're supposed to give warning when there's a system they would no longer support, and they are supposed to get with you to help you ease into the replacement technology and give you several months to do so. Slamming the door wasn't supposed to be part of it.
So now we have to either go without because nobody offers anything remotely like it (I checked), or we can all get domain names and pay for web sites and hosting. Thanks a lot, Cisco. -
My home sharing stopped working last night after finishing a movie.
I had just finished watching a movie and had planned to watch a second one when my power began flickering. My apple TV then couldn't connect to the iTunes store so I restarted my apple TV and the only things that came us were computer and settings. I thought to myself that my cable/internet must be out. But that's OK because I've downloaded all my purchases from iTunes onto my computer and I'd simply stream the content from my computer. It didn't work. I was unable to watch any content through my apple TV. Yet, I could watch content on my iPod and my computer, but I didn't want to sit in my cramped study. Is there a setting I need to change so that apple TV can stream from my computer?
Addendum: I've tried restarting my PC, my iPhone. I've tried switching Home Sharing on and off.
In the playlists, songs, artists, etc. it simply says "No Music". -
The power went out for a few seconds, when I went to watch videos on youtube, I was not able to. What do I need to do to restore this option. It seems to affect only youtube videos.
Duplicated: https://support.mozilla.com/en-US/questions/846960
-
My 2-year-old Airport Extreme instantly stopped working last night and is flashing the status light. The problem description is that the ethernet cable is not plugged in... however, the ethernet cable is still plugged into the cable modem. I checked the modem by plugging directly into my laptop... it works fine. Is this a common problem? Is there anything I can try other than sending it in for warranty repair?
At this point, before sending it back, I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
iPhone 4 just stopped working over night, just black, cannot get any life at all. Put it on charge but not any thing can any body help me.
Hi kimbrook,
If your iPhone is unresponsive, you may find the Power/Battery portion of the following article helpful:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Regards,
- Brenden -
Hi hope somebody can help? i have acrobat 6 pro, worked well for last two years but then just stopped working. Have reinstalled but still will not open, ronning windows 7. Help please!! Janice
Hey janicem42177174,
Adobe no longer supports the installation and use of Acrobat 6 as it is a very old version which is not compatible with Windows 7.
I would suggest you to please use the latest version of Acrobat i.e. 11.0.10 which is fully compatible with your OS with its enhanced features and functions.
You might download a free 30-day trial version of Acrobat from here:
Download Adobe Acrobat free trial | Acrobat XI Professional
Let me know how it goes
Regards,
Anubha -
I have been using GRAB to capture screen displays. It has just stopped working since the last OSX Upgrade. Can anyone, please help restore functionality?
Thanks for that. I did as suggested but when I tried again, it still did not work. Another com.apple.Grab.plist appeared in the Library.
I now have the following files in Library
file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.LSSharedFil eList.plist
file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.LSSharedFil eList.plist.lockfile
file://localhost/Users/peterpatel/Library/Preferences/
file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.plist.lockf ile
What do you suggest I do now? -
Streaming radio just stopped working Firefox version 8, but I can get everything else not on stream to work. Add on's are up to date. I can't recall if it happened after the Firefox up date or after listening to last.fm or what prompted it. How to fix this?
I installed-enabled MS win media player firefox 1.0.0.8, i still did not get streaming, error box comes up and says 'stream load error', the 'windows media test' thing did not work, i tried iheart radio-no luck, so i disabled win media player plug-in dynamic link library 3.0.2629 and tested and still did not work, i also have plug ins: silverlight 5.0.61118.0 and quicktime 7.6.9 7.6.9.0 enabled. I don't know why all of the sudden i have a stream problem with firefox, yesterday, i tried on IE which i never use and had no problem with it. i will try to do more trouble shooting and see, its really frustrating, if can't figure out, i guess will have to revert back to IE which i really don't want to do, but---oh well. thx for help.
Maybe you are looking for
-
JQuery Colorbox Plugin Not Working Properly in IE - HELP!
This is a convoluted issue and I will do my best to explain. I am setting cookies in a page that will show a lightbox on the first visit. It works great in FF, Chrome, etc. but does not in IE. What happens in IE is the script for calling my lightbox
-
Raw files for Nikon D810 not showing a picture in preview for photoshop cs6 . Have camera raw plugin 8.6.0.250 File will open in ACR and process but no picture before opening raw file.
-
Connecting a JVC GR-240 Mini DV camcorder to iMac
Hello, I am completely new Mac user, having used recently decided to ditch my home Dell Pc in favour of a Mac. I have tried to connect my JVC GR-D240 mini DV camcorder to the iMac via the firewire port. Neither iMovie HD (which I downloaded) or iMovi
-
The TV-out option of my N96 produces a black and white feature on the TV. It shows beautifully on my mobile handset but on the TV screen, its in black and white. Thanks! Solved! Go to Solution.
-
I know that in the printing dialog there's a fax PDF option but I've tried several times and all I get in "waiting for modem to become available". I'm connected to the internet via airport so my modem isn't busy. Has anyone used a mac successfuly for