CS6 keeps dropping audio on my Mac

Using a Canon AVCHD camera, every single clip I ingest results in dropped audio. It doesn't matter if I close the program and reopen it, it is always gone. Is there any fix for this?
Thanks.

The message says that CS6 is not supported on this type of Mac.
Is this Hardware overview enough information?
Hardware Overview:
  Model Name:          iMac
  Model Identifier:          iMac4,1
  Processor Name:          Intel Core Duo
  Processor Speed:          2 GHz
  Number Of Processors:          1
  Total Number Of Cores:          2
  L2 Cache:          2 MB
  Memory:          2 GB
  Bus Speed:          667 MHz
  Boot ROM Version:          IM41.0055.B08
  SMC Version (system):          1.1f5
  Serial Number (system):          QP60802EU2S
  Hardware UUID:          00000000-0000-1000-8000-0016CB8B72E7

Similar Messages

  • IPhone 5 keeps dropping connection to iTunes/Mac

    I have had my iPhone 5 for almost a week and I have had recurring problems with my connection to my Retina Macbook Pro.
    I plug my iPhone into my RMBP, via lightning/USB cable, and more often then not my computer does not recognize that any device has been plugged in.
    In the off chance that it makes a solid connection then everything works fine (syncing is a bit slower than my iPhone 4) until something happens and my computer loses connection with the iPhone.
    I'm not moving anything once a sync begins, however it still drops the iPhone.
    Everything is brand new.
    Is this the cable, software, or the iPhone itself?

    Okay, so I went to the genius bar today and spoke to two Apple geniuses, each of whom had a possible solution. Neither one worked for me, but both are good ideas and they may work for someone reading this thread so I'll include them here.   I also tried one other thing which worked for me.  I'll list that below. 
    Genius 1's Idea - Do a complete uninstall of iTunes before reinstalling. SInce there is no uninstaller for iTunes, she suggested a program called AppZapper, which would remove iTunes and all associated files.  I tried this and AppZapper works fast as advertised.  Unfortunately, it fixed nothing. 
    Genius 2's Idea - He was convinced it was a system problem so he suggested a clean install of the operating system, which would require a backup of all files and downloaded apps.  SInce I wasn't prepared to go to such extreme measures just yet, I tried one more thing which I should have tried much earlier...
    My Idea - I launched Disk Utility and ran Verify Disk, followed by Repair Permissions.  It found and repaired many damaged resource files, most of them belonging to iTunes, Image Capture, and iPhoto, the exact programs that were unable to see my iPhone.  Anyway, this worked.  iTunes kicks in instantly upon plugging in the iPhone, and appears in the Devices list just as it should.  And it may be my imagination, but everything seems to run a little zippier now.
    So Genius 2 was half right.  It was the system that was broken.  But doing a clean install turned out to be unnecessary. 
    Hope this helps. 

  • Airport keeps dropping Back to My Mac

    Internet still works, but can no longer connect back to my mac remotely.
    Checking my airport using the Airport Utility. Not only is the Back to My Mac status not green, but the little circle is missing all together. Signing back in puts it back to green, but goes off again soon after.

    Shouldn't be any Mac required.

  • Why does Logic 9 keep dropping audio trks

    I'm using Logic pro 9 and i am using 3rd party guitar plug ins by Ikmultimedia.
    Basicly I load up a trk that I know works but for some reason it will randomly choose to play only some of the trks that I've used the bass and guitar plug ins on.
    This never used to do this in 8 and its incredibly frustrating almost to the point of opening the door and throwing Logic out as far as possible.
    Anyone got any ideas before said event????
    I've re-installed and updated Logic and Ikmultimedia
    Many thanks
    Dave

    repair permissions!
    you can define logics behaviour after boot in the preferences, you may want to check them...loading the latest project is also an option which might come in handy..

  • Audio keep dropping

    Can anyone help me with output issue. I'm not sure why audio output keep dropping and reset whenever I sang too loud. Is that something to do with CPU overload? or Microphone, Audio Interface problem?
    I'm using Mac Air, Alesis io2 interface and legacy Axis6
    many thanks

    Thanks guys; I will read further and consider your advice at length. For the moment though, let me add:
    Mostly okay with files from my Sony HandyCam AVCHD HDR-CX100 but...
    I am getting errors associated with imported avi screen capture clips made with Hypercam 3.0 in the MainConcept AG AVC (Adobe2) DV/H.264 codec Version 7.4.0.46599 (Build 2008-06-11). Its Main Settings include 10 frames per second keyframe every 100 frames AVC Preset: HD 1280x720p Video Format: PAL Baseline Profile Level Auto Picture Type Frame. Initially I had success with that codec and the tool does mention (Adobe2) in its title for that codec.
    The sound was captured in uncompressed audio PCM using a Realltek High DEF Microphone. All play fine in WindowsMedia Player. Sometimes sync is lost so that the picture lags the sound by a few seconds. I can sometimes get them into PRE 8 okay but then sometimes not. Persistent attempts eventually work but any disruption by Terminate & Stay Resident (TSR) processes kill the conformed audio and you have to start again. TSR's include Norton's wanting to do a backup, McAfee wanting to install virus signatures, Windows Update showing a notice scheduling a restart, hp wanting to update a driver, etc.
    I guess you are in a different timezone to me (could be a good thing) as it is 4:30 am here in Adelaide when it is 10 am in LA or 1 pm in NY or 7pm in Hamburg. Will read your advice ore when I am properly awake :-)

  • Help me!:audio keeps dropping out and coming back in while importing clips

    While importing from my camera (brand new Canon Xl-2) to imovie, the audio from the tape keeps dropping out and coming back in for some reason.This happens with all my tapes. I've tried using a head cleaner and that didn't help. I'm using a Maxtor external hard drive to save the project on. The project itself is kind of big (about 80 GB) Can imovie support projects that large? Could this be a problem with my processor?
    I'm just frustrated beyond belief right now. Any help you can give would be greatly appreciated. Thanks!
    these our my specs: Processor: 800 mhz. Memory: 1GB SDRam. The disk space icon at the bottom of imovie says i have 151 GB of disk space left.
    powermac g4   Mac OS X (10.4.5)  

    Hi e
    With a slow computer one has to minimize the hassle.
    I would
    - repair permissions
    - cheque that nothing else is taking resourses from the job (energy saver,
    screensaver, File Vault etc.)
    - I would move material to my ext hd so that I got > 80Gb free (for a 80Gb
    project)
    - nothing else connected than my Mac + Camera and import.
    Yours Bengt W

  • Intermittent problem after launching Premiere Pro CS6.0.2 - audio pitch dropped and video staggering

    Intermittent problem after launching Premiere Pro - all audio is lower in frequency by very noticeable amount and video keeps dropping back a few frames every few seconds, apparently trying to keep in sync with slower audio.
    This does not happen consistently, perhaps every 5 or 6 launches. Otherwise program works normally after launch and sometimes a quit and relaunch will fix the problem.
    Have submitted bug report but wondered if anyone else having the same problem?
    Mac OSX 10.8.4 iMac 3.4 Ghz Intel Core i7 32GB

    Well if i do that, the video will raise up GBs larger (and that is really bad).
    Why is it really bad?
    Its a fact of digital  life. High datarate = quality.
    example ...even the Youtube preset is in the 8mpbs area.
    ...and you are exporting 1 hr 35mins of media.

  • Todays update! After todays update I can no longer send Safari or Spotify to the task bar without it cutting out (dropping audio in and out). Streams normally if I keep the window open on my desktop. This needs to be fixed immediately.

    Todays update! After todays update I can no longer send Safari or Spotify to the task bar without it cutting out (dropping audio in and out). Streams normally if I keep the window open on my desktop. This needs to be fixed immediately.

    Nevermind. I figured it out.

  • My mac mini keeps dropping wifi connectivity

    Hi Folks,
          My new Mini keeps dropping wifi connectivity so I lose the connection to Apple TV and even just browsing on Safari seems painful hoping a page will load before losing connectivity. I reset my router, restart the mini and it intermittently keeps happening. Has anyone come up with a workable solution?
    Thanks

    Hi Leo, this has worked for a few...
    Though all of these steps may or may not be needed, I'm including them all.
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x/10.8.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    (There may be better or faster DNS numbers in your area, but these should be a good test).
    Click OK.

  • My mac book keeps dropping the WEP password

    My mac book keeps dropping the WEP password. I have  a netgear wireless router and all other computers are running fine on the network just the macbook seems to be dropping the WEP. any thoughts?

    Beeps can mean the RAM (memory) is failing or has failed.
    Power On Self-Test Beep Definition
    Take your Mac to an Apple Store or Apple certified repair provider.

  • My MAC OS X 10.7.5 keeps dropping Wi-Fi randomly for a few seconds, and then reconnecting.

    I do a lot of browsing and sometimes gaming - I notice that at random intervals, usually around 30 minutes, my wi-fi will drop and then reconnect (without me having to do anything) in about 10 seconds. It's really frustrating. I know it's not my internet because my brother has a Macbook Pro also and his doesn't drop connection.
    Running MAC OS X 10.7.5
    bought macbook around August and I haven't found a fix for it since then.
    -I have searched for a fix but I haven't seen anyone with this exact problem.
    THANKS!

    I had a problem with my friends new MBP too. These steps fixed it. Keep me posted.
    First, Check for software updates, by clicking on the Apple () and then on 'Software Update'
    Then try
    SMC Reset
    http://support.apple.com/kb/HT3964
    PRAM Reset
    http://support.apple.com/kb/PH4405

  • My i-mac keeps dropping wi-fi signal

    My i-mac keeps dropping wi-fi signal.

    The next thing I'd try is changing the DNS settings from what your ISP uses. If you are not familiar with DNS then please look over CNET's DNS Article and MacWorld's DNS Troubleshooting. Then use the following to reset:
    1. System preferences
    2. Network
    3. Click Advanced
    4. Click DNS tab
    5. Click + sign
    6. Add 208.67.222.222
    7. Click + sign
    8. Add 208.67.220.220
    9. Click OK.
    10. Exit System Preferences

  • Audio keeps dropping out. Orignal file audio is ok.

    Audio keeps dropping out. Orignal file audio is ok.

    What version of Premiere Elements and on what computer operating
    system is it running? Version 13, PC with Windows 7
         What are the properties of your source media? Do not understand what
    you are looking for. But hare is some info
         Length 00:01:23 Size 311MB, Frame Width 1920, Frame Height 1080,
    Frame Rate 29 frames/sec, data rate 29977kbps, total bitrate 31616kbps
         And, if possible, please tell us the brand/model/settings of the
    camera or device that recorded the audio. Canon 70d, default settings
         Is the audio a separate audio file or a component in an video audio
    file? Component of video
          What is your project preset? default
          Also I was able to reload orginal file and there was no audio drop
    out. But I need to understand what can cause this issue. But when I
    load this file into Power Point 
         I am also having issues playing the saved file (for view on
    computer). The audio drops out after about 20 second, video continues
    to play. This did not happen with the orginal file that had the audio
    drop outs in premiere. What dropped out in Premiere also dropped out
    in Power Point. 
         If needed I can send you the file.
         Thank you for your quick response
         Ron

  • HT1338 Why does my VPN keep dropping out on my new MAC?!?! Could it be anything to do with the MTU settings?

    Why does my VPN keep dropping out on my new MAC?!?! Could it be anything to do with the MTU settings?

    I am having the same exact problem as you described I can't see your Screen Shot.
    Try these methods.. they are supposed to work, but havent for me maybe your luck is different. http://osxdaily.com/2012/11/30/resolving-stubborn-wi-fi-connection-problems-in-m ac-os-x/t
    If i go right next to my router the internet works fine but where I used to get 5 bars I get like none and if im lucky 1. Didnt' have this issue 2 - 3 days ago

  • AirTunes audio keep dropping out from my AE streaming...

    I am using 3AE's for streaming audio from iTunes wirelessly. Been working fine but started dropping audio out intermittently. When it happens, the airtunes control shows no names for thoes AE's dropped out... but I see placeholders. Sometimes never come back and have to restart my iTunes... It's super annoying this happening to me. Is there anyting I can do to address this issue? Anyone?

    Hi.
    *Here's what worked for me.*
    (sorry this is a double post here and in another topic).
    In a nutshell : I *did a factory reset of my Airport Express base station* (saved and restored the Express's profiles) *and everything went back to normal.*
    I had a perfectly working setup for about a year and a half (Airport Extreme-monoband as a router with a 5 Ghz only 802.11n network, plus a 802.11n Airport Express in bridge mode, connected to the Extreme via an Ethernet cable, and creating a 2.4Ghz 802.11n/g/b network).
    The Extreme/5Ghz network is the fastest. My Macs, iPad and AppleTv are wirelessly (except for the Mac mini which is wired to it) connected to this Extreme/5Ghz network.
    My iPhone 4 and iPod (latest) cannot connect to the 5Ghz network and connect to the Airport Express/2.4Ghz slower network.
    Everything worked very well, including Airplay in all directions, including video from iTunes, iPad, iPhone or iPod touch to my Apple TV, and audio to my sterero system plugged to the Airport Express.
    Until 1 week ago : Everything from the iPod touch or iPhone started to fail : video to Apple TV rarely worked, and audio through Airport Express had a lot of drops out.
    Internet access speed from the iPod and iPhone was very slow, as confirmed by internet speed testing apps.
    Everything going through the Extreme/5Ghz network continued to work flawlessly, including video to Apple TV and audio to Airport Express.
    If I connected the Macs or iPad through the Express/2.4Ghz network, problems appeared there too.
    Connecting them to the Extreme/5Ghz network had the problems disappeared.
    After reading some posts in another discussion, I factory reset the Airport Express using the Aiport Utility (actually first export profiles; then factory reset, then reimport profiles).
    Everything is smooth as silk now.
    It it starts failing again, I will just factory reset the Airport Express.
    Let's just hope that Apple a firmware fix in a not too distant future ...
    Hope this helps,
    Jérôme.

Maybe you are looking for

  • TO_DATE Function Is not working

    Hi Friends, select * from view_date where to_date(my_date) between '01-dec-06' and '31-dec-06'; This query is not responding... I have the the date field in character in the view so i need to convert it to date ,so that iam using to_date function and

  • S10-3 Wifi Problem in Quick Start OS (Splashtop​)

    I just got my S10-3 on last Saturday, and I found out that the wifi is keeping disable in Quick Start OS. No matter I press Fn+F5 or switch the wifi button, the Wifi cannot be enabled in Quick Start OS. But everything is alright in Windows. I guess i

  • How can i remove the line between columns?

    I'm laying out poetry and I only want one column--even in landscape mode. But in landscape mode there's still the line between columns that cuts through my text. I've tried dragging the line, clicking on it and deleting it. When I click on it two Xes

  • Make a report parameter "required" dynamically

    Hi All, I have a following requirement in report. There are 3 parameters (invoice period, GL period, Supplier name) defined for report concurrent program. All above parameters are optional. The requirement is If both invoice period and GL period are

  • How to keep crop marks when saving as PDF

    In Illustrator CS5, I have some artwork which has 3mm bleeds all around.  The printing shop requires me to provide the artwork with the bleed and also the crop marks showing as well in PDF format.  But whenever I save as PDF, Illustrator doesn't show