CS6 monitor - full screen weirdness....

Win 7 , Quadro 3800FX ...CS6...
Has anyone else seen or experienced this little weirdness.
Minimise PPRO CS6...ande do something like go to Win Explorer, PhotoShop (or whatever)..close "whatever" to discover that PPRO Program monitor is full screen on Primary Monitor. As if CTRL-Grave (ctrl-tilde) has been invoked.
Mouse to top right where Program Monitor is located ( default position usually) and the PPRo interface restores itself as ( timeline , project panel etc..)

Never seen that Behavior on my system, I use an Nvidia GT470
Regards
Julio C

Similar Messages

Monitoring full screen HDV over firewire from camcorder

Hello,
I am a recent switcher from Windows to Mac. One thing I haven't figured out how to do yet on my Mac is to simply use my MacBook Pro screen to monitor (in full screen) the HDV video that comes off the Firewire cable of my Sony camcorder.
On Windows XP, I used to use VLC for this. I posted a message a few weeks ago asking for help with this on my camcorder's forum:
http://www.sonyhdvinfo.com/showthread.php?t=13728
but haven't gotten any solution yet.
The thing is that the Mac version of VLC doesn't have the 'Open from Capture Device' feature that the Windows version does, and I haven't been able to figure out any other way with Final Cut or Quicktime on my new Mac to do this.
Again, I simply want to MONITOR full screen the HDV video that comes off my Sony camcorder's firewire. If I use the logging tool in Final Cut, I only get a small preview window (which I can't seem to get full screen). Same in Quicktime. Of course I can CAPTURE the tape to Final Cut and then playback full screen, but that is a step I'm hoping to avoid.
Do you Mac folks have any other tricks for doing this?
Thanks for the help!

Thanks for all your replies, but I still haven't found a solution for this one:
@Red Door:
It looks as you might be right! Thanks for confirming what I've found to be true: this may not be possible on a Mac!
@Studio X:
Thanks for this idea. I already do this when I have a HDTV available. But the idea here is that I'd like to be able to use my laptop monitor for this when I'm on the road (and don't have an HDTV, or the HDMI cable, available). As I said, with my Windows laptop and VLC this was a great solution to monitor my HD camera when I'm on the road with just my laptop and camcorder. Its a shame I can't get my gorgeous new MacBook Pro with the beautiful almost-HD resolution monitor to do this!
@Thomas & Andy:
Thanks for these recommendations .. they almost worked! I tried both and neither quite did the job. BTV looks like a really old program (last release 2002?). It looked promising, but alas couldn't get it to recognize my HDV camcorder.
Monitor Magic looked even more promising, as it is a new piece of software specifically made for this purpose. Indeed, it did recognize my HDV camcorder no problem, but alas it still couldn't do the job. First, you can't monitor full screen! (That's my whole point.) Additionally, I didn't get any sound and also the video quality was really poor in the preview window. No way to deinterlace and lots of dropped frames. I got a better preview window out of Final Cut and Quicktime.
Anyway, thanks for your recommendations but my search continues! (At least until a better version of VLC for Mac comes out!)
I remain really surprised how hard this is to accomplish on a Mac! Macs have such a good reputation for video/media editing. Regardless, this was pretty tough to get working on my Windows laptop until I discovered VLC.
Thanks again!

Dual Monitor Full Screen Images

Hy to everyone, I have a G5 with dual monitor out set to 1024x768 each, for a total resolution of 2048x768, i created images graphics of that resolution(2048x768)like jpg tiff, flash,and I want to display these enterely on the two monitors not only in one, when i maximize the windows it fit the images only in one screen and not in two screen. What i have to setup? is there some software that manage the desktop and windows of the mac?
Thanks a lot.

No, if i set Quicktime in full screen mode the movie fit only one monitor and not 2, even if my movie i set to 2048x768 pixel and my 2 monitors are 2 1024x768 in desktop mode!! I Can manually strech the quick time to reach the 2048x768 resulution, but i see the toolbar of quicktime and i dont wan't it.
Thanks a lot.

Dual monitor full screen woes

I generally use two screens (two separate monitors) while working on my macbook pro at home. the issue i face is that if I need to use an app in full screen, say i watch a movie on one of the screens, the other one is rendered useless and only shows a black screen. Is there someway to use both my screens as separate spaces, whereby I'm able to use full screen apps on both my monitors at the same time?

I haven't seen this occur on my Macbook pro with secondary or triple monitors. Is this happening with all fullscreen content (eg. YouTube)? What browser and Flash Player Version are you using? Also, is this a retina macbook?

RDWA - limit to one monitor full screen for IT support staff

In our shop, we use RDWA to access the Windows 7 virtual desktops, server is Windows Server 2012.
Since IT support staff have two monitors, when they login to user's virtual desktop for testing / support purpose, the display will be spanned across two monitors. We want to keep the user's virtual desktop in one monitor and use the other monitor
to other purpose, e.g. searching internet for problem resolution, email, etc.
Is there a way to restrict the virtual desktop to show up full screen in just one monitor.
I have searched the forum but seems not getting the answer.
Assistance appreciated.

Hi TP,
Thanks for your reply.
In your previous response, you mentioned there are other methods for IT support staff to connect to the user's virtual desktop.
>> "How exactly are they using it to connect to a Windows 7 VM? Are they using the Connect to remote PC tab and entering the name of the VM, or do they have access to the same virtual desktop collection as the user, or are they
logging on to RDWeb using the end user's credentials, or ?"
May I know how the other connection methods can be achieved?
Thanks for your advise.

Forcing secondary monitor full screen

I have to flash projector files: one acts as a controller to
chose a flv(s). The other plays the selected video (through
localconnect).
Th second projector (the "player" if you will) needs to load
full screen in-order to display on a TV properly. However, adding
fscommand("fullscreen","true"); forces the projector to load in the
primary monitor.
Is there a way to assign what monitor it should load full
screen into? If not, can you think of a way around it? (3rd party)
Thanks!
EDIT: Did some more research. Let me define my question
farther... Is there a way to do this with out jugglor?

Yes FlashJester Jugglor can do exactly this.
http://www.jugglor.com
Download a FREE evaluation copy and go to
Setup Settings -> Windows Settings -> Multimonitor
Support -> Show the
window on monitor no 2
and thats it !!
No coding required.
Regards
FlashJester Support Team
e. - [email protected]
w. -
http://www.flashjester.com
There is a very fine line between "hobby" and
"mental illness."

PSE 6 - Dual Monitor Full Screen Problem

I've got a Thinkpad (with NVIDIA Quadro M140 integrated graphics) connected via DVI to a Samsung SyncMaster 206BW monitor using Vista Enterprise.
I've set up my workspace as Dual Monitor, DualView. My Font DPI is set at 96 (Default).
When I click Maximize on the Thinkpad LCD, PSE 6 opens fully and correctly.
When I click Maximize on the Samsung external monitor, PSE 6 opens a window that is larger than the monitor AND there are no bars at the bottom to shift the display. Therefore, I cannot see about 15% of the right side of the window when in Maximum/Full Screen mode.
PSE 6 appears to be the only program that has this problem.
I cannot adjust the monitor, since I'm connected via DVI.
All video drivers are current.
Is there a fix for this problem?

I haven't seen this occur on my Macbook pro with secondary or triple monitors. Is this happening with all fullscreen content (eg. YouTube)? What browser and Flash Player Version are you using? Also, is this a retina macbook?

Strange behaviour of 2nd monitor full screen image

Hi,
Since last night, my LR5 is starting to behave very strangely with my 2nd monitor image. My 2nd monitor has been set to "Show, Full Screen and Loupe-Normal", and I have always been using this two monitor set up to show my image in full screen mode (since LR4) without problems. But since last night, the 2nd monitor image starts to minimize itself randomly. If I click the 2nd monitor icon (on the bottom left of main screen) it comes back. Then when I moven to the next photo, it may disappear (minimize) again. It is very frustrating. I never changed any of my settings. Is there anything that I missed? What makes the 2nd monitor image go away? Anybody experienced the same phenomenom?
Thanks in advance.
Jerry

Have a look :
http://dl.dropbox.com/u/3563737/Lycos/Beach.html
http://www.wyodor.net/_Demo/Fancy/Dynamic_Text.html
Paste the code in a HTML Snippet.

Yosemite - dual monitor; full screen option

I have a Mac Mini running the latest version of Yosemite. I have two monitors. Because I want to use Spaces, I do not have separate desktops on each monitor. My problem comes in when I click on a window "expand" button. When I do this the window expands to fill its current monitor. What is new with Yosemite (at least in my experience) is that all content on the other monitor (doesn't matter if it primary or not) is blanked out. Presumably the purpose of this is to allow someone to focus better on the task at hand. However, focus is not the only reason why someone would want to fill their current monitor's screen with a single window. It could just be used as a short-cut way to enlarge the current window.
I'd appreciate any suggestion as to how to work around this besides dragging the corner of each window to fill the monitor screen. And I'd recommend that if this behavior is as planned, that users have an option to [ignore | leave as is] the other monitor's content.
Thanks in advance for any reply.
Todd

I haven't seen this occur on my Macbook pro with secondary or triple monitors. Is this happening with all fullscreen content (eg. YouTube)? What browser and Flash Player Version are you using? Also, is this a retina macbook?

How to open Illustrator CS6 in Full Screen?

This is a very banal question:
How can I open the Illustrator CS 6 in the full screen mode.
The program opens every file in the minimized mode and I think it's annoying when I have to clcik the full screen every time.

Hi sleepyhead,
If the problem is with the application opening in full screen mode (your second sentence) - you can right click on you Ai shortcut and go to Properties. Under Properties you can set the application to run in full screen mode (see screen-shot):
As for the minimized files - not sure if it will help but you can set your preferences to open files as Tabs. This should solve the problem. Go to Edit > Preferences > User Interface > Open documents as tabs

[Non IE Regression] Support for full screen mode with multiple monitors

This seems to be a regression with Flash Player v11.2.202.x (for all other browsers).
With Internet Explorer it is still working.
http://kb2.adobe.com/cps/890/cpsid_89050.html
== Support for full screen mode with multiple monitors ==
Full screen content will remain in full-screen on secondary monitors, allowing users to watch full-screen content while working on another display.
Tested on Windows 7 x64 SP1 with:
- Internet Explorer 9
- Firefox Release, Beta, Aurora, Nightly
- Opera 12 build 1116
In bugbase.adobe.com I cannot choose v11.2.x

Please vote for it If you have the same problem:
https://bugbase.adobe.com/index.cfm?event=bug&id=3016912
Thanks

CS6 Full Screen Mode Feature Needed.

Hello Community,
I bought the CS6 Master Collection about a year ago and was surprised that I was unable to put Photoshop, FlashBuilder or any other CS6 application in full screen mode like my other Mac applications do. The only thing I can do is resize the application window and hide the dock.
Is there going to be an update to show support for CS6 users and allow us to use these programs in full screen mode? I think it would be fantastic if that happened. Then I could use hand gestures on my track pad or mouse to switch between applications that I have currently running all while staying in full screen mode within each one.
I'm thankful for Retina screen support but a larger canvas is ideal for creative development in my opinion. I work on the 15" Retina MacBookPro primarily because I'm so dang mobile in my work/lifestyle and I value every square inch of the screen.
Adobe Please Give Us (CS6 users) Full Screen Mode.
BTW: I still consider my self a new user as I'm still learning how to use these applications. If by some small chance there is already a way to do this please respond and tell me how. Thanks.
~ Troy.

CS6 is feature complete and will not see any new features.

Display image in full screen

Hi everyone, I am a newbie for labview. I just wanna ask you about image display in labview. Now I can display one image in my front panel. I open the file path and display it. First thing I wanna do is that is it possible to display on monitor full screen not on front panel and second thing is that how can I display images in folder and display it about 2 seconds delay in between? Pls kindly help me.
Thanks millions.
Solved!
Go to Solution.

Hi there,
-I don't know whether the image full display can be possible or not, Any reason why you are asking for such requirement?
-The other question about reading files in a folder and display for 2sec can be done like shown in image.
-I've attached vi in lv 12 if needed.
-Next time, please post your vision related queries in Machine vision Board.
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13
Attachments:
Image_read_folder.vi ‏43 KB

Full screen mode annoyingly pops up...Help!

I usually use photoshop (cs6) in full screen mode with menu bar. Often I use the window+d shortcut to return to the desktop. From here, whatever window I open, ie my browser, explorer, etc, photoshop pops up in the background minus all the menu bars. This is very annoying because it means I cannot work with files on my desktop. Is there a fix to this? I really hope so. I've included an example below.

I know this may sound strange, but see if you notice any difference if after you open a document you float the document window and then go to fullscreen in photoshop.

Bridge cs6 why do the photos have poor quality in full screen preview ?

Hi
windows 7 64bit , bridge cs6
well i load 20mp or 22mp pixel photos , raw and jpg
i select the images i want to watch and with the spacebar i go in full screen preview
but in fit to screen they look bad , i mean with no crips , no details
but in full screen preview 100% the photos look great
why ?
is there an option to watch them in fit to screen , full screen preview with a great quality
thanks

mantralightroom wrote:
why is it this option disabled? do the generate monitor sized previews increase a lot the cache a lot!
Potentially, yes. The standard Preview is 1024 pixels, longest size. Some people (like Omke) have displays 2560 pixels longest side, potentially increasing file size by over 500%.

CS6 monitor - full screen weirdness....

Similar Messages

Maybe you are looking for