CS6 now not supported after i updated the applications.
CS6 is now not working after i updated the applications. They were working minutes before i decided to update. i keep getting this pop up when im trying to open one of the applications
is there anyone that could help me resolve this problem?
Run the Creative Cloud Cleaner Tool, reinstall from scratch.
Mylenium
Similar Messages
-
why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
I accidentally added the app store apple id wrong, then I was able to put the right one but now that I need to update the application tells me to insert the id of the psw wrong, how do I change it?
You must update the apps with the Apple ID that they are purchased with.
The only way to get round this is to re-purchase the app with the new Apple ID. -
Camera features not supported after software updat...
i recently update my n96 from v10.... to v30.033 . all features improved but when i want 2 open camera it says that feature not supported . what should i do???plz help me
I hope there is no problem with your phone camera.
Try to install firmware again. If problem ia still there, back up important data to using your computer or within your phone to the memory card and goto Nokia Care in your city for repairs and software update or reinstall.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.---------------------------- -
After my friend locked me out of my iPhone with too many wrong password attempts I restored my iPhone via recovery mode and now it is showing that picture of a cable leading towards itunes, and itunes says the sim is not supported but it is the original sim. How do I fix this?
Something went wrong with the update, this can and does happen with every version of iOS.
There is nothing wrong with the update.
Simply restore the device via iTunes on the computer.
If iTunes is stating it will take hours to update, that indicates an extremely slow Internet connection and is likely the reason the OTA update failed. -
itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install. -
I updated my ipad today. right after it updated, the screen went black. Since then I have not been able to turn on my ipad. I am recharging it. It has been recharging for 55 minutes. I have tried to reboot, nothing. I have tried everything i know to do. Nothing What else can I do?
You may need to try recovery mode now. Read this.
iOS: Unable to Update or Restore -
After I updated the iOS version on 11/23/13, I can not access anymore my Pages documents. It says it's updating. How long would this take to update?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
How to Solve the Problem of An iPad App Download Stuck on “Waiting”
http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
How To Get Rid Of Your iPad App Download Frozen Problem
http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
Another thing to try - Turn the iPad Off & then back ON.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
Cheers, Tom -
After restoring iPhone 4, iTunes is telling me that my SIM card is not supported. It is the same SIM I have always used with this phone. What action can I take to convince phone that the SIM card is OK?
Hello again, update time.
Finally got to speak to a senior technical advisor at Apple today who was most confused until he back-tracked and double checked all the basics. He then realised that the actual serial number of my original phone (from the proof of purchase I sent him) was different to the one that they had recorded when they made the swap. I think he said it was out by one character and was actually showing as a mobile connected to AT&T (from the States). He said that the replacement phone was then set-up as per the serial number they had typoed into their system as locked to AT&T. The genius who did the swap at Apple Doncaster must have placed an unlock on it at the time in order for my 3 SIM to work at all. Therefore when I restored it, it returned to the settings of the incorrect original phone serial number!
So... Apple tech advisor said he can rectify the records and re-set the factory setting to an Australian iPhone on the 3 network within 12-24 hours. Fingers crossed all is good by tomorrow afternoon.
Thanks for your suggestions though, I had been trying everything to get it to work as I'm sure you know how hard they are to live without once you've got used to living with one!
Cheers, Tom. -
I've just started using the App Tabs. I think this feature could be handy but why are the sites not updated when I start Firefox. Now I have to manually update the site which is somewhat of a downer. Does any of you know where I'm going wrong?
To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step. -
Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.
@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help! -
After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?
Click here and follow the instructions.
(99061) -
I bought an audio book on my iphone when i went to update my iphone it is now not there. I have the reciept of the purchase but cannot find it on my itunes or on my phone how can i redeem this purchase again?
Nope not there i dont know what to do
-
I just updated my iTunes and now I get a message that the application has failed to start because MSVCR80.dll was not found. What happened and how do I fix this? I can't access any of my music now.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99460) -
My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks
"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.
Maybe you are looking for
-
Is there a way to create customer smart controls?
I use Mainstage to play worship music in a few different church venues and love the flexibility that Mainstage brings. I'm using an external instrument, Omnisphere on my Akai MPK88. I have each channel mapped to sliders on my keyboard, which is great
-
My iPhone 4S seems to be in visual impaired mode, and the touch screen no longer works. I have tried rebooting the phone without success. How can I get back to normal mode?
-
Dear All, I have a requriement where Credit memo will be created against multiple invoice reference but amount will be copy in single line from VBRK-NETWR for all refenced bills. I have sarched in furum and found that it is not possible I have to cop
-
There's no thumbnails to drag around except one on the left side of the page (the one that's open). The right side of the page lists every tab I have created.
-
I'm running into an issue with installing this software on Windows 7, it seems to freeze while attempting to install the "Adobe Fonts All" this is not a component that can be removed from the install list that I can see...is anyone else experiencing