CS6 on start up stops and asks for disc
Had been using CS6 for a couple of days then went to open it and it asked for disc. Finally had to uninstall and reinstall. Seems to be working now Win7 64bit
okay, let's try the techniques from the following document:
iPod: Only Apple Logo appears on display when turned on
Similar Messages
-
Photoshop CS6 Extended 64 bit stopped working (asking for registration)
Is there a solution for this yet?
I registered this in 2012 and have been using it since on my Dell 64 bit laptop Windows 7.
Now its asking for registration again.
I don't want to use up another activation.
What happened to Adobe support? Why is there no phone number to call?I already looked at what was available at the link.
I entered the license again and this time it worked.
Does this mean that I have used both of my installations?
This PC is the only one it's been installed on. I should still have one more installation. -
I have changed my Apple ID from an old email to a new one. But It keeps coming up with my old email and asking for my old password. How do i stop this from happening and get it onto my new one? Its on my Ipad and iphone 5, please help as its doing my head it
How do you update it? Basically what has happened my password was disabled for "security reasons" on sunday (21/10/12), so i tried to reset it, but for some reason i couldnt get into my old email (probably because i havent used it for 2 years), so i read on here i could swap it to a new email that i currently use (which is what i have done) ive swapped everythin over to it (facetime, iCloud etc) but keeps coming up with old email and asking for password
-
My iphone suddenly stops working and asked for activation required. I did restore it thru itunes but it asks me to turn off "find my iphone". How can i disable "find my iphone" if i can open the iphone itself. please help me.
My iphone 5 suddenly stops working and asked for activation required. I did restore it thru itunes but it asks me to turn off "find my iphone". How can i disable "find my iphone" if i can't open the iphone itself. please help me.
-
HT1338 Daughter's MacBook Pro started and asked for 6 digits on a grey screen?
Daughter's MacBook Pro started and asked for 6 digits on a grey screen?
6 digits sounds like the code sent from Find My Mac when locking the machine. It can only be reset by an Apple Store.
-
My Ipad2 is turning off all Icloud settings and asking for password every minute
Hi,
My Ipad2 is turning off all my icloud settings by itself and asking for the password every minute. After about an hour it works again but only for a few days and starts turning off the settings again.
This started about 3 weeks ago an even when it starts working again for a few days there are still some photos and contacts missing. But on my IPhone and on icloud.com everything is fine.
Has anyone an idea what is happening?Hi,
Thanks for the tip. I deleted the Account and at least everything is back on my ipad. But it was asking for the password a few times since then.
But if it stops turning off all my settings i could live with putting in the password every hour...
I will see if it stops deleting and turning off. -
When I try to buy any app or song from iTunes app or app store on iPhone 5 it seems to start the stops and goes back to baseline in a second or two.
It did it with my old iPhone 4 in last month or so, and it I hoped it would go once I updated to new iPhone 5. The problem has transferred to new phone too.
I can't sign in to iTunes account on iPhone. It takes the password then resets to baseline. No error message comes up. On the base computer (pc) it will allow me to sign up and buy songs, apps etc. I can then sync the phone and put them on it. It just won't let me buy direct from the .
As there are no error messages I am at a loss what to do. I have updated the payment details on my account, and my husband has an iPhone 4 and has no such problems. We share the same wifi. I have tried with 3G as well as wifi, with no luck.
I am pretty much out of ideas, and have tried searching forums but there is so much overlap between queries that I can't find a similar problem from someone else, but I am sure it exists!
Can anyone please help me?
Thanks in advance
SarahI figured it out!
I read a solution for something that sounded similar.
Anyone in similar position:
Open iTunes app on iPhone, and pick an option from bottom, such as music. Then scroll down to bottom of page and where your iTunes ID is, press on it, and pick sign out.
Then return to home screen, and double press home button and press and hold on first icon showing, until a minus symbol appears in the top left of icons present. Press on each minus symbol on each app in turn, until all app icons have disappeared. Then Restart the phone by pressing and hold the home button and the on/off/standby button at top of phone, until the apple symbol appears in centre of blank screen.
Swipe to turn phone fully on and open settings and scroll down to iTunes and apps option and tap that. Pick sign in and put in your apple ID, it will accept it and then return to home screen and open iTunes a you'll find it works fine
Simple really, but some like me won't think f this themselves!
Hope that helps -
My mothers iPod dosent show her primary mail acct and asks for a password for her primary mail acct and shows her secondary acct without any label and password please help tried everything do i need to delete both accts and start over????
also the secondary acct does not show up on mailboxes just #of e-mails something is not right with this iPod should we delete the mailing accts and redo them or...... please help my mother almost threw the iPod overboard on her last overseas trip and ive tried everythin i know to do so help help help
-
I'm trying to get to "www.enoriver.org." A window appears asking me to choose an application--I choose Firefox. Then another window opens titled "Another Application" and asks for a file name at the botto0m of page. I choose Firefox from the list of files, paste it into the bar, hit "enter"--nothing happens. What do I do?
Hi Leo! If you can stop these down load managers, you will be my hero.
Dokie!!
PS I have tried my best to warn members here on the forum, but I haven't got a lot of support so far.
I have my figers crossed that the new team will get-er-done -
Start, restart, stop and status stored procedure - howto?
First:
- this and other otn forums are awesome!
- apex is neat
Second:
- I have O'Reilly books: "Oracle pl/sql programming" and "Mastering Oracle SQL"
- Also tried to search / google best practices around stopping 'hanging stored procedures' and creating logics for such happening
Challenge:
I would like to implement simple solution for starting, stopping, restarting and maybe even getting status of stored procedures. Sounds like unix runlevels but in "userspace" without the sys rights.
Finally I would like to have this functionality in apex-application where predefines stored procedures could be started, restarted, stopped and maybe even status could be retrieved.
start - this is simple, start - but maybe check if such stored procedure is already started ( so this start will fail)
stop - send signal to certain procedure(s) that now it/they should exit immediately
restart - actually stop+start
status - maybe via status table indicating e.g. records_processed/records_to_be_processed
Mostly I need this stop so what would be the best way to write "exit" for stored procedure? I would like to avoid the following approach:
SELECT sid, serial# , username, schemaname, osuser FROM gv$session;
ALTER SYSTEM KILL SESSION '<sid>,<serial#>' IMMEDIATE;
/paavo
Edited by: paavo on Jul 13, 2009 11:35 AM - added status to subject :)paavo wrote:
Thank you, very good references, but still I think my challenge persist on stop still because I try to do this without the rights to v$session etc. tables.
So what would be the best way to deliver stop-message to executing stored procedure. E.g.
- via table which is regularly checked by stored procedure (e.g. in loop it selects from the table)
/paavoI think for stopping such a procedure you have only two sensible possibilities.
First option is to kill the session. For this you or the logic that does the kill needs the appropriate rights to do it.
Second option would be to programm this behaviour. The procedure can listen to a kind of signal and if it gets that signal it is stopped. This signal can be a value in a parameter table, but it can also be a message in some pipe/advanced queue. However this means the procedure will stop only at certain defined points (whenever it checks for the stop signal).
Btw: You didn't mention what is the business case behind that technical request. Maybe you can elaborate a little on that too. -
When i listen music on my iphone 4 using podcast (training session workout) i switched to radio-canada live and after a while it start to stop and start radio-canada live and voice control stop and start by itself???
I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue. -
iTunes gives me an error and asks for re-installation, the error is "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library coreMedia.dll", and the iTunes can not be lunched any more.
can you please help, as I also tried to re-install it but prEntry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
I'm trying to download adobe flash player for my IMac so I can watch vidios on you tube. It gets half way through the install and then it stops and asks me to turn off safari, I close safari and press continue but it pops up again. Please help. Regards Nick
1. System Preferences > Flash Player > Advanced > Delete All
Press the "Delete All" button
Install Adobe Flash Player.
http://get.adobe.com/flashplayer/
Follow the prompts.
Click "Safari" in the menubar and select “Quit Safari”.
Restart computer. Relaunch Safari.
2. Allow Plug-ins
Safari > Preferences > Security
Internet Plug-ins > "Allow plug-ins"
Enable it.
Press " Manage Website Settings" button for more options. -
Update 13.0.3 it's the same: the Extended version appears and asks for a serial
The last two updates of Photoshop are nightmares...
I have a MacPro 2x2.26 GHz with 8 GB di RAM (Snow Leopard).
One week ago I updated to version 13.0.2 hoping to solve certain issues of the 13.0.1 version. But after the update Photoshop CS6 became Extended and asked for a serial number. I typed my serial, Photoshop seemed to work but after a close and restart the Extended version reappears, and asks again fot the serial.
I talked two times with the Assistance by phone, they tell me to uninstall and reinstall from the official DVD, but it do not change... If I apply the 13.0.2 update the Extended version appears again.
Yesterday I read about the new 13.0.3 update, the solution for the bugged previous version, and I hopefully installed it.
NOTHING CHANGES!
Photoshop become Extended again and asks again and again and again for a serial number.
Now I will unistall and reinstall Photoshop CS6, but I will NOT apply any update after the 13.0.1, even if that version has many bugs.
But I need to work and I have no time to lose.I have spoken to Adobe Customer Support on the telephone today and they confirmed that the matter is known and that the developement team are working on a an update to fix the problem as quickly as possible the also sent me the following email:
Your Adobe ID:Xxxxxxxxxxxxxx
Your Case Number:0xxxxxxxxxxx
Dear Xxxxxxxxxxxxx,
Thank you for contacting Adobe Technical Support. My name is Amit and I am responding in reference to your call dated 24/12/2012. as when you open Photoshop CS6 it open as trial. In this we are aware of the issue and you can use the option "license this software" as a workaround.
This email is in response to support case #Xxxxxxxxxxx submitted by Xxxxxxxxx Xxxxxx.
To respond to this update or review your case history, log in to the Adobe Support Portal online and look for your case number in the "recent activity" section. Should you need to send us additional information, you can do so by opening the case and submitting your update.
If you have difficulties logging in, consult the Adobe ID and Membership FAQ.
Thank you,
Adobe Customer Care -
Dear Friends...... I have an ipad 2 32gb with wifi and 3g enabled sim..... i bought it second hand .... and now if am going to download any games it is showing me an email id and asking for its password... please guide me how can i change this setting to my email id and password
Tap on the id in Settings > Store and log out of it and then login with your id. Any content already on the iPad will be tied to the previous owner's id and it can't be copied or transferred to your id - so it's probably best to do restore the iPad back to factory defaults and start as from new with it : Settings > General > Reset > Erase All Contents And Settings
Maybe you are looking for
-
Hi, Has anyone had any issues with performance when updating the planning buffer using the Exit FM? What are the things to prepare for about performance issues in production system? Please recommend. Thanks RT
-
Sending data to the card in a byte array
I am trying to store a variable dataCI[] with the data that comes into the buffer. I send this: /send 0003000A0102030405 (INS=03) Afterwards I want dataCI[] to have this value= "0102030405" Here is my code. But when I am sending the bytes, it gives m
-
Out-of-Band provisioning issue
Hi there, I'm migrating from Configmanager 2007 to 2012 SP1 at a customer. With CM 2007 I'd succesfully implemented Out-of-band management. Now I'm having some issues with provisioning AMT from CM2012. The testing machines have never been provisioned
-
Same files, two different play sequences
This is probably a stupid question, but I don't know DVD Studio that well. The situation: I have 8 separate video files. They need to be able to be played individually (coming back to a menu at the end of each video), and to be played through complet
-
What is Apple's policy on dead pixels on a Macbook Screen? I have a dead pixel on my screen and I want it fixed. I payed alot of money for this laptop to hear I need multiple dead pixels to get this fixed.