CS6 - painting on 3D object showing up on the other side of the object.
A problem I do not have in CS5 - painting/stamping/blurring etc on a 3D model is showing up in unwanted, unseen areas of the model. I have tried narrowing the falloff, selecting paintable areas. Is there a setting I'm missing that fixes that in CS6?
A little of both of the above, I think. I was making textures for the avatar 3D mesh (I can't find the current links, but they're available for free online) used in open sim and Second Life grids - my work will be used in a real time animation to be shot on a stand-alone opensim grid for a nonprofit arts project. There are funky areas in that model's mapping, which I'm used to working around. After a highly frustrating morning trying to get it done in CS6, I went back to CS5 and finished it. Then I started flipping back and forth between CS5 and CS6 to try to figure out what the differences are - I'm interested in CS6 for working with the screen capture clips. I don't know the tech, but I do see now that there are subtle differences in the way the paint, stamp, erase, smudge, and burn tools behave in CS6 on 3D models. By the end of the day my hands started to figure out the differences, and although it still feels alien, I can use those tools reasonably well on CS6 now, though not as fast.
Similar Messages
-
My itunes shows my iphone but it has an apple logo and a lock on the other side of the screen but i can't sync or restore my iphone.
what do i do?Did you enable your Menu and Sidebar?
Ctrl+S to view Sidebar
Ctrl+B to view Menu Bar -
In previous versions of i Tunes I could highlight a song in my library and a genious list would show on the right side of the screen listing songs that were like the one highlighted. Now I do not get that list. Is there a way to get that back?
Hi again Bob,
I believe I've found the feature you were speaking about now. Information on the "In the Store" feature of iTunes can be found here:
Apple - iTunes - Inside iTunes - Using In the Store from within your iTunes Library.
http://www.apple.com/itunes/inside-itunes/2013/01/using-in-the-store-from-within -your-itunes-library.html
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
on my mac desktop, when i try to facetime anyone it doesn't connect. the screen shows that it is trying facetime them and on the other side says that my requests come up and when they try to answer by connecting it wont and on my side all it does it continously trys to ring them and then finally tells me to try again.HELP!
i can face time from my phone and ipad as well but if i call myself from either iphone or ipad to my computer theres no connection
-
I put in my memory card to the left side of the computer, but I cannot find the file of pictures anywhere. Its not even on my desktop. What should I do and how can I get it to show up on my desktop?
If your Mac is new-ish and has one of the Lions as its OS, the drives, cards, USB sticks no longer show up, even though they're there. Go to Finder's Preferences and tick the corresponding items in the General and Sidebar tabs.
-
In Mail, my message preview used to be shown to the right side of the messages. Now it is showing below the messages. How can I move it back to the right?
Select the Viewing tab in the Mail preferences dialog and uncheck the box marked Use classic layout.
-
I had on my desk top PC (a vista OS) a version of FireFox that the book marks where listed in the book tool bar tab and the "book tool" was able to show all my favs and there was a scroll bar on the right side of the top right side. I would like very much to turn it on in the Laptop I just bought and am having a fit trying to figure out all the differences,.I very much like this function; however, I am now using win 7 which in and of itself is difficult to figure out troubles when they occur such as if the MSN Bing program opens a video window while I am playing, the media center will lock up, or if I am listening to BBradio.org and click on lestening to one of the pastors the laptop will show static on the screen and all you hear is static like you just went to the twilight zone.
== This happened ==
Not sure how often
== unpredictableTo attempt a new chat session...
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
http://helpx.adobe.com/x-productkb/global/service1.html -
I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected in the other building. This problem was not there earlier but has occured recently. I would also like to mention that none of my other colleauges who uses iphone are not facing this issue. Please help me out!!
Assuming you entered the correct WiFi password for your network, see these articles:
iOS: Troubleshooting Wi-Fi networks and connections
iOS and OS X: Recommended settings for Wi-Fi routers and access points -
Interface flapping and always shows up/up even other side is shutdown
Hi, there, I have a interface flapping issue in my network. 2 Cat3560 is connected through 2 trunk port configured with port-channel. When I shutdown one of port in Vlan100, other 2 ports in the same vlan will flap going up and down and OSPF will lose the neighbor. One thing I notice that is when I shutdown the switch port, on the other side of router, the L1-L2 is still up/up. I think it should be up/down. I have a keepalive setting on the router interface to 1800. Any body can give me some hints here to troubleshoot?
Here is the switch configs.
Building configuration...
no service pad
ip subnet-zero
ip routing
no ip domain-lookup
spanning-tree mode pvst
no spanning-tree optimize bpdu transmission
spanning-tree extend system-id
interface Port-channel1
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 100,200,300,400,600,700
switchport mode trunk
interface GigabitEthernet0/1
switchport access vlan 600
speed 100
duplex full
interface GigabitEthernet0/2
switchport access vlan 100
speed 100
duplex full
interface GigabitEthernet0/3
switchport access vlan 600
speed 100
duplex full
interface GigabitEthernet0/4
switchport access vlan 700
speed 100
duplex full
interface GigabitEthernet0/5
switchport access vlan 700
speed 100
duplex full
interface GigabitEthernet0/6
switchport access vlan 100
speed 100
duplex full
interface GigabitEthernet0/7
switchport access vlan 100
speed 100
duplex full
interface GigabitEthernet0/8
switchport access vlan 100
interface GigabitEthernet0/9
switchport access vlan 100
speed 100
duplex full
interface GigabitEthernet0/10
switchport access vlan 100
speed 100
duplex full
interface GigabitEthernet0/11
switchport access vlan 100
speed 100
duplex full
interface GigabitEthernet0/12
switchport access vlan 100
speed 100
duplex full
interface GigabitEthernet0/13
switchport access vlan 100
speed 100
duplex full
interface GigabitEthernet0/14
switchport access vlan 100
speed 100
duplex full
interface GigabitEthernet0/15
switchport access vlan 100
speed 100
duplex full
interface GigabitEthernet0/16
switchport access vlan 100
speed 100
duplex full
interface GigabitEthernet0/17
speed 100
duplex full
interface GigabitEthernet0/27
switchport access vlan 400
interface GigabitEthernet0/28
switchport access vlan 400
interface GigabitEthernet0/29
switchport access vlan 400
interface GigabitEthernet0/30
switchport access vlan 200
interface GigabitEthernet0/31
switchport access vlan 200
interface GigabitEthernet0/45
switchport access vlan 500
speed 100
duplex full
interface GigabitEthernet0/46
switchport access vlan 500
speed 100
duplex full
interface GigabitEthernet0/47
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 100,200,300,400,600,700
switchport mode trunk
channel-group 1 mode on
interface GigabitEthernet0/48
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 100,200,300,400,600,700
switchport mode trunk
channel-group 1 mode on
interface Vlan1
no ip address
shutdown
interface Vlan100
ip address 192.168.40.11 255.255.252.0
no ip redirects
no ip proxy-arp
standby 1 ip 192.168.40.1
standby 1 priority 110
standby 1 preempt
standby 1 track Vlan600 20
interface Vlan200
no ip address
interface Vlan600
ip address 192.168.35.1 255.255.255.0
router ospf 7
log-adjacency-changes
network 192.168.0.0 0.0.255.255 area 0
ip classless
=====================
When I shutdown interface gig 0/2, interface gig0/3 and gig0/4 will go down as well and come back online after a while.
Thanks for your help.Your question is really missing a BUNCH of details, but I will take a stab at it:
1) Why on earth do you have a keepalive set to 1800 seconds on the router?
2) Your discussion and config above only talks about qty 2 c3560 switches. Where is the router in this topology?
3) You are going against several Cisco best practices here with your trunk ports:
a) I would never config a port-channel as mode 'on' because the switches will ignore any errors on the ports that would not keep the channel stable because you have configured them to hard set on. ALWAYS set the port channel to mode 'desirable silent'. The config needs to match on both ends of the link.
b) I would never config a port as a trunk mode 'on' without also running UDLD. It appears that your 2-port port-channel trunk above is using copper ports. You MUST enable UDLD on the copper gigabit ports manually (UDLD is enable by default on fiber gigabit ports). You may need to 'udld enable' globally on the switch depending on the IOS version. Obviously, as above, the same config needs to be done on both switches.
4) The log message that you get when you say ports g0/3 and g0/4 go down, is that for just VLAN 100 or are they line-protocol messages?
5) When port g0/2 goes down, are there any other ports in VLAN 100 still up?
6) What are the results of the following commands:
show int g0/3 switchport
show spanning-tree summary
show spanning-tree int po1
show spanning-tree int g0/2
show spanning-tree int g0/3
show spanning-tree int g0/4
show spanning-tree vlan 100
show spanning-tree vlan 600
show int status
show etherchannel summary
show etherchannel detail
show int trunk mod 0
Post more details and I'll try to help... -
Google Docs page freezes and it shows the files in the main page. However, it doesn't show the collection or folder on the left side of the page. It shows "Loading" on top of the page and it stays with "Loading" display forever. Chrome doesn;t have any such problem. I would like to use FF for google docs if it works. This happened only after I changed to FF 4.0. Now, I went back to 3.16 and it shows the same behavior as 4.0 version. Any help will be appreciated.
I'm replying to my own question in hopes that it'll push my post to the top of any lists to garner some sort of response.
Any help is most appreciated. Thank you. -
My iphone & ipad mini are both here w/ me at my home. But the findme app is showing my ipad mini on the other side of town, how can i get that corrected?
Hello Krazyboutgolf,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS 7: Understanding Location Services
http://support.apple.com/kb/HT5594
Improving GPS accuracy2,4
GPS accuracy varies depending on the number of visible GPS satellites. Locating all visible satellites can take several minutes, with accuracy gradually increasing over time. Use these tips to improve GPS accuracy:
Ensure the date, time, and time zone are correctly set on the device in Settings > General > Date & Time. If possible, use Set Automatically.
Important: Incorrect settings on your computer can sync to your device. Verify the date, time, and time zone on any computer that syncs with your device.
Restart your device.
Verify that you have a cellular or Wi-Fi network connection. This allows the Assisted GPS (A-GPS) on the device to locate visible GPS satellites faster, in addition to providing initial location information using the Wi-Fi or cellular networks.
Note: Microcells (sometimes called Femtocells) aren't supported with Location Services.
Maintain a clear view of the horizon in several directions. Keep in mind that walls, vehicle roofs, tall buildings, mountains, and other obstructions can block line of sight to GPS satellites. When this occurs, your device will automatically use Wi-Fi or cellular networks to determine your position until the GPS satellites are visible again.
Best of luck,
Mario -
HELP -- hi with apple Configurator why does it show with a yellow triangle on the right side of the screen what am i doing wrong for the ipads not syncing or whatever and how do i fix that? although i have looked online to try and figure it out and here is the website i found is this the stuff i need to do to fix this? is this site what i need to do to fix this? http://edtechstandish.wordpress.com/what-ive-learned-about-apple-configurator-so -far/ Thanks
Sorry but I don't know anything about this. But you might have better luck posting this question over ing the iPad in Business and Education forum here: https://discussions.apple.com/community/ipad/ipad_in_business_and_education?view =discussions.
-
Why is the icon for street view not showing up on the left side of the location on the maps app?
Because the included Maps app no longer gets the maps data from Google, so no more street view.
You can get a free Google Maps app from the iTunes App Store. -
I have been unsuccessful merging serval pdf files into one file. I select the Sidebar for both pdfs, then drag one pdf on top of the other and Save the Version. When I open the file I think I have saved, it shows only the original pdf. Advice would be appreciated. Thank you.
wouldnt it be easier if you could do something like this?
https://discussions.apple.com/thread/3392535 -
Since upgrading to the newest ios 6.1.2 itunes isn't showing my app list on the left side of the screen, nor does it show all of my self made movies, only the purchased ones. Anyone else experiencing a similar problem? The iTunes store and most of the other features show up but other normal features seem to be missing too. I wish I hadn't upgraded. Anyone else having this problem????
If you are talking about iTunes on your computer use the iTunes View menu item, "Show Sidebar".
If not, I have no idea what you are describing.
Maybe you are looking for
-
Using Acer LCD TV as monitor for mac mini
Hi I'm trying to use an Acer LCD TV (AL2671W) as a monitor for my mac mini. The only way I can get it to work is booting the mini when connected to a different monitor then plugging in the AL2671W - this then works fine. If I boot when connected to t
-
Cost centre and Profit centre in one query - Authorisations not working!
Hiya, I have another problem related to Analysis Authorisations. I have created an AA with Cost Centre and Profit centre access restricted to a certain node of a hierarchy (type 1 - this node and below). For example, the User can only run a query at
-
class ThreadA { public static void main(String [] args) { ThreadB b = new ThreadB(); b.start(); synchronized(b) { try { System.out.println("Waiting for b to complete..."); b.wait(); } catch (InterruptedException e) {} System.out.println("Total is: "
-
Product distribution file could not be verified
Hi I keep getting the following message "The product distribution file could not be verified. It may be damaged or was not signed" whenever i try to update my software. I've been getting the problem for a while, couldn't find asolution that worked a
-
Help please ! applet can't run on web site but can on my machine
I had uploaded my applet to some free web site. The problem is that if I'm trying to open html of applet, instead applet appears gray area. This happens only if the computer has no PLUG IN or JRE installed. Tell me please if there is some other solut