CS6 Photoshop - No Printer Profiles

I have Photoshop CS6 running on WIndows 7 64bit. When I go to the print menu my HP Photosmart 8250 printer is selected. However, there are no printer profiles listed. No HP or any other printer profiles. The profiles listed are e-RGB, various Fujifilm, Kodak film, etc. The pictures are assigned to Adobe RGC (1998).
Is the problem because Photoshop does not recognize the HP Photosmart 8250 or is something else wrong? The printer worked fine through Photoshop CS 5.5.
Is there a way toI define a custom printer profile?
Thanks for the help.
MWL

I was having the same issue with all of CS3 and Snow Leopard. So thanks for the tip on where they need to be located. Instead of doing your alias trick, I just made copies inside the Adobe Color folder. That works so far with Illustrator. Haven't tried the other programs yet. Again, thanks for posting this!

Similar Messages

CS3 printer profiles (icc & icm) have disappeared.

I am running under XP SP3 with Photoshop CS3 version 10.0.1 with an Epson R2400. All of the profiles are present in windows/system32/spool/drivers/color, but are not listed in Photoshop's printer profile list. Everything was working fine as recently as 3-4 weeks ago, and everything is still working fine in CS2 which is also installed on this machine (3.7gig processor with 1gig ram) and several large hard drives).
I noticed the problem after installing SP3 today, but the problem remained after I restored a Ghost image created just prior to the SP3 update. Thus, it seems not to be caused by SP3. I have reinstalled SP3 based on that conclusion.
The only items on the printer profile list look like things that ship with Photoshop such as Apple RGB.

Sorry, but it is NOT a screen resolution problem. As I said, up until a few weeks ago, everything worked fine. Printer profiles are displayed, but, I suspect, ONLY the ones which ship with Photoshop. Other profiles, such as those for the 2400R are NOT displayed even though they exist in the correct location. I can see the entire profile list, and there are no scrolling controls being displayed.
Options were reset before I posted this issue. The reset did not help.

Printer profiles not recognised in Photoshop CS6 print dialogue

Note that the Illustrator, Indesign and Acrobat print dialogues see all my (custom) printer profiles.
Even Photoshop sees them in the Apply Profile and Convert to Profile dialogues: just not when trying to print.
Is this a known problem?

Thanks, Jeff. This issue goes far beyond Adobe. I'm trying to resolve colorspace problems that get even more confusing when there are multiple web pages or other documents at multiple websites, including software companies and camera companies that have conflicting information for the same thing. I don't want to add something else into the mix that may make things worse. Unless the user can have the settings that they know worked on their device to rely on as a point of reference to make controlled changes to accommodate a software change, it's like taking two handfulls of M&Ms to represent various colorspaces in three places in a program and using trial and error to figure out which two or three colors to use and in which order. I think of this as informative dialog and not venting.
Update: After burning through another color ink cartridge and 20 more sheets of Kodak glossy photo paper, I managed to come up with a combination of profiles and colorspaces that are acceptable with the Kodak ESP9 printer in PS CS6. While Adobe RGB should work from the Nikon D7000 JPEG for a larger color gamut, with the Kodak printer, the colors were dull. Went back to sRGB in the camera and sRGB IEC61966-2.1 for the working RGB profile. In this printer, color management cannot be disabled in the printer itself, so I selected Adobe RGB. In the PS Print Settings Color Management, PS Manages Colors, and the Printer Profile is Beta RGB (Adobe RGB is not an available choice). After increasing the photo brightness to about +20, the contrast slightly, and increasing the shadows setting to bring out the shadowed areas somewhat, the printed photo is a close match to the on-screen image on the calibrated LED monitor. When I tried CIE RGB, the colors were more saturated but had too much blue. Maybe this will help others.

Print profiles no longer working correctly with CS6 64bit to my Epson R2880

Hi, until recently, my print profiles were working correctly with CS6 64bit (Win 7 ultimate 64) to my Epson R2880, they now print washed out/desaturated but the same profiles still print correctly using Lightroom 4. has there been an update that could have affected things or are there any other suggestion? Thanks, Dave.

Hi,
I hope someone can help!
I recently bought my first Mac, a great MacBook Pro which I love!
I use Lightroom3 and Photoshop CS5 to edit photos and now want to print from my Epson R1800.
I found that the prints initially came off very dark & contrasty, so I calibrated both the MBP screen and my Samsung SuncMaster 245B monitor with my Spyder2 and the Colorvision software.
Even after establishing colour profiles for both screens, the printed image was still far darker and "heavier" than that shown on screen. This was the same whether printing from LR3 or from the Mac Preview app (it was worth trying I thought!).
So searching for help on the web I came across this thread and now wonder whether I should uninstall my driver (6.57) and reinstall the printer with 6.23.
Stephen did you find that this worked - did PS CS5 behave after that?
Of course I'm trying to print some work soon and in desperation could adjust every (edited) image by brightening & reducing contrast, however with dozens to print it seems crazy to do that, not to mention wrong!
Thanks for any help!
Paul

Quadtone ICC print profiles not found in CS6

I have several ICC profiles installed in the Colorsync>Profiles folder. They are QTR ICC profles for B+W printing. CS5 sees these profiles when assining custom profle for soft profing and when choosing a profile for printing.
CS6 finds the profles in the pulldown window only when soft profing. They are missing from the list of profiles in the printing menu. If CS5 can find them why not CS6. Are hey in a diferent location?

I am trying to get to the bottom of some differences between photoshop 5 & 6. This post allows me to bring up my previous beta post:
http://forums.adobe.com/message/4291149#4291149
I am curious to know if there are some new rules in CS6 with sending printing through the colorsync (apple) pipeline.
The above image shows that photoshop may be calling on colorsync to find attached profiles. My 9880 has no attached profiles by my other printed had this in the color sync area. It seems to me there is a lock down on the profiles to be used. This at least is my current standing interpretation based on other forums reading.
But the other question is the profiles below the line. Where are they stored and where can I add my custom profiles to that list. Based on my previous beta post, I still believe there is a different policy on how adobe works in the printing pipeline. Ive been printing fine art large format prints for about 4.5 years always using photoshop as the color handler. It seems now the big boys at apple are trying to further their control by looping this through colorsync (if im correct).
I know the last post on the beta page, I was asked to provide the profiles in question:
https://www.dropbox.com/sh/8vl1ql6dypxngn5/NiMrBSLiO1
Those are my profiles I am using now. My machine is the latest Mac OS and latest epson 9880 drivers.
Ill supply any more information to get to the bottom of this strange issue.

Photoshop CS6 Colour Management Printing issue

Hi,
We use Photoshop and 2 x Epson 9800 printers to print our images, we used to use CS4 and have recently upgraded to CS6.
We are having a problem with the “Colour Management” settings in the Printer Settings window. We choose for Photoshop to Manage Colours and select our ICC profile and Rendering Intent and Black Point. Our problem is that these settings reset each time we switch between our 2 printers back to “Photoshop Manages Colours” so we have keep selecting the same settings over and over again. This never happened on CS4.
How do we save these settings so that they do not reset each time we switch between printers.
I don’t think it has any relevance but we have our printer’s settings set to “No Colour Management” as the warning states.
Kind Regards
Steven

You possibly need to add the profiles for your printer first.
In LR select 'other' in the profile dropdown for the color managment. In the list check all the profiles you need for your printer.
When you select a printer profile in LR and let LR manage the colors make sure to turn off the color management in your printer driver settings.
HTH
Franz

Profile PhotoShop for printer at Costco.

I want to profile PhotoShop for printer at Costco. I have the Costco profile. How do I tell photoshop that I want to see the images as they will be printed?

Where did you install the profiles?
…and did you reboot your machine afterawrds. or did you at least log out and back in?
You have provided no information about your setup at all (shame, shame!) so I can't comment until you do.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

PLEASE CAN YOU TELL ME HOW TO GET PHOTOSHOP CC TO RECOGNISE MY PRINT PROFILES?

Profile problem
A question Adobe do not seem to be able to answer. Or rather they do not understand my problem.
I am having a problem getting Colour profiles for my printing papers recognised by Photoshop CC in My Mac OSX10.10.1 Yosemite
To put the profiles onto the Mac I did as follows >Computer>Mac HD >Library>Colour Sync >profiles >Recommended -then dragged the profile into this file.
The profiles appear in the print dialogue in Photoshop CS5 which I also have on my Mac
The profiles appear in Lightroom 5
In Photoshop CC the profile is NOT shown in the print dialogue and the profile list is very much shorter than in CS5.
Please can you tell me how to get Photoshop CC to recognise my print profiles?
I was thinking I would need to delete and re install but I have just downloaded the latest edition of Photoshop CC and the same problem applies.
It is rather frustrating to have to go from CC to CS5 in order to make a print!
Many Thanks
Tom Derbyshire
[email protected]

I don't know if this applies to your problem, but past problems in this form seem to recommend updating the printer driver when using Yosemite.

Epson 3800 printer profiles not showing up in Photoshop 3 and 5

When I try to print to my Epson PRO 3800, asking Photoshop to handle colors, this printer profiles are not available. I have this printer for years and have always used PS CS3 to print (and handle colors). Now I have PS CS5 but continue to use 3 for printing to the 3800, because the Epson profiles disppeared from CS5. Now they have disappeared from CS3 too. Any advices?
Thanks1

it might be helpful to include what os you are using (unless i missed it)
http://helpx.adobe.com/photoshop/kb/print-settings-option-unavailable-print.html
gballard.net/photoshop/epson/cs5/

CS6 Photoshop Print Settings- Problem w/1/2" borders

I have started to have probelms with the printing pictures using the CS6 Print Settings box.
After I have selected all the appropriate Printer setups and set the Print size to 8.5x11 both in Printer Setting and in the CS6Scaled Print Size box I get the below Print Preview.
Both when I manually enter Scale,H&W and when I check the "Scale to fit Media Box".
It leaves the top and bottom with a 1/2" white border at top/bottom as seen below.
Any advice would be welcome.
Dan

There may be a interaction between your Printer Driver Settings and your Photoshop Print settings. May depend on your OS and Printer Drivers. I'm on a Windows 7 PC with Epson 4800 Printer. I opened a new black document set to be 8.5" by 11" at 300 DPI. I did some screen captures of Photoshop Print Dialog where I used the Printer setting button to set different printer setting so you can see the effect they have on Photoshop's Print Dialog. I have Photoshop manager the colors and turn off the printer color management. So basically all I use the printer setting for it to turn off color management and to set Paper options.
Capture 1 Paper Tray 8.5" x 11" Portrait Standard Print Area
Capture 2 Paper Tray 8.5" x 11" Portrait Maximum Print Area
Capture 3 Paper Tray 8.5" x 11" Portrait Borderless option note the paper in Photoshop's print dialog in no longer 8.5" x 11"
Capture 4 RollPaper Paper Sized define 8.51" x 11.1" Printer Borderless option With this paper size set in the printer Photoshop's print dialog shoes 8.5" x 11"
One more capture with Paper Tray 8.5" x 11" Paper Print area maximum not borderless with printer scaling the image to 100% of 8.5" x 11" in printer setting note this look like borderless option with roll paper set to 8.51" x 11.1"
As you see the Photoshop Dialog changes after the Printer setting are changed using the printer setting buttons.
However your screen capture look more like a mismatch of Aspect Ratios. The print dialog shows portrait paper and your image windows shows a almost square aspect ratio the aspect ratio difference between your image and your paper is causing your white boarders. Your image is more square then portrait. So when its width is scaled to 8.5" wide some 229% the same percentage of the height does not reach 11". Aspect Ratio you must not forget about you Images Aspect ratio and your paper aspect ration you do not want to distort you image to fill the paper so crop you image to your Paper aspect ratio if you want a boarderless print.

Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened an

Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." Even after closing and reopening the program, the print command is greyed out so I cannot select any printer. This also happens with a Brother laser printer. Both printers will produce a test page out side of the Adobe product. Help!

I cannot get any help either. I get the message "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." I have reinstalled all drivers, powered off/on all printers (2 of them - a Brother HL - 4040cn and an Epson Stylus Pro 7890 - which all worked fine until this morning). There appears to be no path to a solution. I have read all the forums and tried about 20 different suggestions all to no avail. Reboots, changing cables, reinstalling printers and drivers and Photoshop CS6 - ALL TO NO AVAIL. On a macbook pro retina with 10.10.3. This issue is out there and some get solutions - but not all - that's my crowd...the not all crowd. I have yet to be able to print from CS6 any more. This is a show stopper and my patience is wearing thin. And I'm tired of stupid questions like "is your printer powered on?" give me a break. This appears to be an adobe photoshop cs6 problem - as I can print from every other application. Anyone have any ideas? Adobe should have something?... Adobe system info below:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Mac OS 10.10.3
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2300 MHz
Built-in memory: 8192 MB
Free memory: 4665 MB
Memory available to Photoshop: 7059 MB
Memory used by Photoshop: 70 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
OpenCL Version:
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
Display: 2
Display Depth:= 32
Display Bounds:= top: 1072, left: 140, bottom: 1950, right: 1580
Video Renderer ID: 16918311
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
OpenCL Version: 1.2 (Feb 27 2015 01:29:10)
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
Display: 1
Main Display
Display Depth:= 32
Display Bounds:= top: 0, left: 0, bottom: 1050, right: 1680
Video Renderer ID: 16918311
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: 92629107631240972642
Application folder: KerrysHD:Applications:Adobe Photoshop CS6:
Photoshop scratch has async I/O enabled
Scratch volume(s):
KerrysHD, 232.6G, 19.7G free
Required Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
Primary Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Plug-ins:
Additional Plug-ins folder: not set
Installed components:
   adbeape.framework   adbeape   3.3.8.19346   66.1025012
   AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
   adobe_caps.framework   adobe_caps   6.0.29.0   1.276181
   AdobeACE.framework   AdobeACE   2.19.18.19243   66.492997
   AdobeAGM.framework   AdobeAGM   4.26.17.19243   66.492997
   AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
   AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
   AdobeBIB.framework   AdobeBIB   1.2.02.19243   66.492997
   AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.492997
   AdobeCoolType.framework   AdobeCoolType   5.10.31.19243   66.492997
   AdobeCrashReporter.framework.framework   AdobeCrashReporter   6.0.20120201
   AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
   AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
   AdobeLinguistic.framework      17206
   AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
   AdobeOwl.framework   AdobeOwl   4.0.93   66.496052
   AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
   AdobePDFSettings.framework   AdobePDFSettings   1.4
   AdobePIP.framework   AdobePIP   6.0.0.1654
   AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
   AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
   AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
   AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
   AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
   ahclient.framework   ahclient   1.7.0.56
   aif_core.framework   AdobeAIF   3.0.00   62.490293
   aif_ocl.framework   AdobeAIF   3.0.00   62.490293
   aif_ogl.framework   AdobeAIF   3.0.00   62.490293
   AlignmentLib.framework   xcode   1.0.0.1
   amtlib.framework   amtlib   6.0.0.75
   boost_date_time.framework   boost_date_time   6.0.0.0
   boost_signals.framework   boost_signals   6.0.0.0
   boost_system.framework   boost_system   6.0.0.0
   boost_threads.framework   boost_threads   6.0.0.0
   Cg.framework   NVIDIA Cg
   CIT.framework   CIT   2.0.5.19287   145486
   data_flow.framework   AdobeAIF   3.0.00   62.490293
   dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0
   dvacore.framework   dvacore   6.0.0.0
   dvamarshal.framework   dvamarshal   6.0.0.0
   dvamediatypes.framework   dvamediatypes   6.0.0.0
   dvaplayer.framework   dvaplayer   6.0.0.0
   dvatransport.framework   dvatransport   6.0.0.0
   dvaunittesting.framework   dvaunittesting   6.0.0.0
   dynamiclink.framework   dynamiclink   6.0.0.0
   FileInfo.framework   FileInfo   66.145433   66.145433
   filter_graph.framework   AdobeAIF   3.0.00   62.490293
   hydra_filters.framework   AdobeAIF   3.0.00   62.490293
   ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
   ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
   image_compiler.framework   AdobeAIF   3.0.00   62.490293
   image_flow.framework   AdobeAIF   3.0.00   62.490293
   image_runtime.framework   AdobeAIF   3.0.00   62.490293
   LogSession.framework   LogSession   2.1.2.1652
   mediacoreif.framework   mediacoreif   6.0.0.0
   PlugPlug.framework   PlugPlug   3.0.0.383
   UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
   wrservices.framework
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

Photoshop (CS6) do not print - dialog is not available

Hello to all,
The Photoshop of my CS6 do not print. I use different networkprinters (Canon iR-ADV C2220 / 2230). When i try to start the print menue come nothing up except the error box which say that the connection to the printer is not available, and i should select an other printer. Unforunatelly was not come any dialog form.
After this try are much menues deactivated.
The Acrobat print without any problem.
What can i doing to let the Photoshop print?
Best regards,
Johannes Wendtland.

Hi,
You can also use a FTP client (or your browser if it supports FTP) and download from the Adobe FTP server (ftp.adobe.com). The files are in /pub/adobe/cs6/downloads :
Windows (launch the .exe which will open the 7z file):
ftp://ftp.adobe.com/pub/adobe/cs6/downloads/Photoshop_13_LS6.7z
ftp://ftp.adobe.com/pub/adobe/cs6/downloads/Photoshop_13_LS6.exe
Mac :
ftp://ftp.adobe.com/pub/adobe/cs6/downloads/Photoshop_13_LS6.dmg
Previous versions are also available in /pub/adobe/photoshop/win and /pub/adobe/photoshop/mac
These folders are public so you don't need any identifier to connect.

Need InDesign, Illustrator, and Photoshop for printed magazine... should I purchase CS6 or Creative Cloud?

Need InDesign, Illustrator, and Photoshop for printed magazine... should I purchase CS6 or Creative Cloud?

Some questions
Can you do what you want with 3+ year old versions, or do you need the latest features?
Do you want to pay one time for a perpetual license, or do you want to pay monthly rent?
Creative Suite 6 or Cloud Plans https://creative.adobe.com/plans

CS6 Photoshop: One newly-created PSD filewon't print because the print dialog box won't appear altho the file properties appear to be the same as other files that do print.

CS6 Photoshop: One newly-created PSD file won't print because the print dialog box won't appear after selecting File > Print. Then "Print" becomes grayed out. The file properties such as permissions, are the same as other PSD files that do print. This file also cannot be converted to Adobe PDF, which is not offered as choice under "Save as", whereas other can be. I've exited, reopened Photoshop, restarted computer, checked out other CS6 PSD files which do print, nothing changes. The 52 MB file has been flattened. OS is Windows 7. Thanks for any suggestions.

Sounds like the printer driver is having some problems.
Try holding the space bar down when you select Print (which makes the print dialog NOT load previously used settings).

Add printer profile to Adobe Photoshop Elements 7.0

Hi
I have Adobe Photoshop Elements 7.0 running on a Windows/7 64 bit system. I print to an epson 1400.
I wish to print a photo from the PSE editor. Unfortunately the editor does not allow me to choose the appropriate printer profile for the epson 1400 & the paper I have loaded.
The profiles are correctly installed in C:\Windows\System32\spool\drivers\color; and they are available to other programs, like MS Photo Viewer. But PSE editor does not display them as a choice.
PSE 7.03 does allows me to specify a printer profile. After pressing control-P I am presented with a PRINT dialog box. Among other things, I choose:
Color Handling: Photoshop Elements Manages Colors
Printer Profile: presents many options, including:
- working RGB - Adobe RGB (1998)
- working CMYK - U.S. Web Coasted ....
- working Gray
- and many others,
but no Epson profiles.
For Epson Premium Photo Paper Glossy I want to use the SP1400 1410 PGPS profile provided by epson.
Does anyone know how to get PSE 7.03 to allow this choice?
thanks
John

Colin
Thanks again for the helpful reply.
I have not previously calibrated my monitor. I am looking at that now. but
have avoided it because:
   1. Adobe recommends (http://kb2.adobe.com/cps/333/333356.html) that LCD
   displays not be calibrated.
   2. The colors on my Dell 2007WFP are the same as on the back display of
   my Nikon D80 within my ability to differentiate. And they are good!
   3. The colors produced by the Epson 1400 were way off for some skin
   tones (specifically brown skinned people - about half of the folk who I
   photograph). This was not a minor adjustment issue. And sometimes they
   were off in the Green direction, other times they looked red or orange, more
   in shadows than in highlights.
   4. The skin tones printed from Picasa were very good (short of excellent)
   while the skin tones from PSE 7.03 were completely inferior - I did not
   suspect a problem with the monitor calibration or the printer - PSE was at
   fault.
Ok, now I used the calibration tool that seems to be part of Win/7 - I got
to it via the control panel:display. I made no adjustments to the monitor -
it seemed fine.
I would like the printer to duplicate what I see on the monitor. prints are
a bit lighter than what I see on the screen.
I am printing now with the following parameters:
   1. from PSE Editor
   2. Photoshop Manages color
   3. Printer Preferences
      1. Premium Photo Paper Glossy (I use epson paper & inks)
      2. Color Management: ICM & No Color Adjustment
   4. Printer Profile: SP1400 1410 PGPP (thanks!)
   5. Rendering: Relative Colourimetric
John Kinne

CS6 Photoshop - No Printer Profiles

Similar Messages

Maybe you are looking for