CS6 Playback problems with more then 3 Video Layers

I am having problems playing back a project with more then 3 HD video-layers (PIP and MultiCam).
After one second playback of video stops and I can only hear audio.
The same projecet in CS5.5 can be played with 8 !!!! active HD video layers without problems ...
Must have something to do with disk IO - I can play 9 HD streams with multicam if I use the same video on all 9 layers (each with a few frames offset)
I920,18GB RAM,GTX 680,9TB Raid5
regards
michael

Hi Jeff,
I allready deleted the cache and db files - even shift&alt startup didn´t change anything.
yes - MPE is enabled for the new CS6 project ;-)
In CS6 I can playback 9 HD streams with 3way-cc in multicam mode - as long as its the same clip 9 times - each with a few frames offset
as soon as I change the offset for each video to 30sec, playback gets choppy after 1 or 2 seconds and after 2-4 seconds it only shows 1 frame every 1 or 2 seconds (or stopps)
... tested with canon-hdv, canon-dslr and gopro2 material - no difference
Right now I cant even play 2 video streams in CS6 while CS5.5 still works with all 8 layers ....
regards michael

Similar Messages

I am facing problem with more then 300 'characters', charactristic def

Hi friends,
Any one help me for this issue.
We receiving data from source (SAP CRM) systems to SAP BW, Characteristic description is more then 300 Characters we want to report this in BEX.
Description of a characteristic from source system to BW will come more then 600 and may be more then 1000 characters it is not fixed.
Our problem is how to pull data into BW?
How to take Report on this pulled data?
Please suggest or give me idea how to resolve this Issue.
Regards
Mohan

Hello Mohan,
check these
Re: Long Text data to upload into BW
check these blogs
/people/sap.user72/blog/2006/05/27/long-texts-in-sap-bw-modeling
/people/sap.user72/blog/2006/06/03/long-texts-in-sap-bw-modeling-150-follow-up
/people/sap.user72/blog/2006/06/05/long-texts-in-sap-bw-displaying-in-bex-analyzer-introduction-to-excel-workbooks-formatting-part-i
/people/sap.user72/blog/2006/06/05/long-texts-in-sap-bw-displaying-in-bex-analyzer-introduction-to-excel-workbooks-formatting-part-ii
Best Regards....
Sankar Kumar
+91 98403 47141

I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!

I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!!! ASAP

Hi,
Check the iChat Menu > Preferences > Video Section > Bandwidth setting.
iChat needs to see a Minimum of 128kbps to do 1-1 chats in Video
For 3 and 4 way chats it needs 384kbps
Set the Bandwidth to 500kbps if it is set lower.
Also check the speed you are getting from your Internet supplier.
9:28 PM Thursday; February 23, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

"Problem with Your Audio/Video Configuration"

"I Tunes Has Detected a Problem with Your Audio/Video Configuration. Audio/video playback may not operate properly."
Does anyone know why I'm getting this error message? After getting it, I usually cannot hear any sound on I Tunes or other media players.
I've already tried uninstalling and re-installing the drivers and it doesn't help. I also have the latest version of I Tunes. Any ideas?

I had this problem also and uninstalled and then reinstalled Quick-time yesterday and the problem was solved.
However when I turned on my PC today, I had the same problem again but this time uninstalling and reintsalling Quick-time is not working.
Anyone any other suggestions as to how to fix this problem?
Thanks.
Dell Dimension 3100 Windows XP

HT201272 I spend a considerable amount of time in Asia and am finding the ability to download previous purchases now shown on my iCloud account. Music appears fine and most movies are OK but I have problems with all music videos included with album purch

I am finding the ability to download previous purchases now shown on my iCloud account to be difficult. Music appears fine and most movies are OK but I have problems with all music videos included with album purchases. Any ideas?

Phillip_dc wrote:
Firstly, I purchased my first iPhone a few years ago, since then there have been a lot of apps released, a lot which I downloaded for free, tried and deleted from both my phone and my iTune 'Apps' Panel. What bothers me is when I do get a new iOS device, iPad and/or iPhone 5, and I don't want to just copy the back-up of my current iOS device to the new one, then to get the apps I want I will have to scroll through countless useless 'trash' applications in my purchase history to 'cloud download' the ones I want.
Just sync the apps you want from your computer. You don't need to redownload them directly on the iPhone Purchased list.
Will Apple be employing such a feature, a 'permanently delete/un-purchase' feature?
Dunno.
Send suggestions here -> http://www.apple.com/feedback/

Problem with RTPExport output video files

Hi, I have a problem with RTPExport output video files. One side streams H263/RTP(AVTransmit2.java) and other write this steam to a file by RTPExport.java. When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Pls how can I achieve output file that will have the same fps like original one? How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Its there a way to modifi rtpexport or avreceiver to do this? Thanks a lot!

Trubka wrote:
When network conditions are ideal, output video file has same fps and same number of frames like original file. Problem occures, when theres packet lost in network, then output file has different fps,and also has less frames like original video(because it didnt write missing frames to file, and thats why it get shorter). Okay, first off, the second file is smaller on purpose. RTP intentionally drops packets that are old/out of order in order to make sure real-time video stays as close to real time as it can. This is by design, so there's really nothing that can be done about it.
How to write to file an identical copy of what I can see while receiveing video with AVReceive2.java? Technically speaking, what you're getting in the RTPExport is exactly what you got on the receiving end. Any frames that are dropped during transmission will not be seen by the receiver, nor saved by the receiver.
Pls how can I achieve output file that will have the same fps like original one? I'm not 100% sure that you can, but, you can give the following idea a try. I make no guarentees that it'll work, but it should work for you...
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/RTPConnector.html]
That example is an example of a "custom transport layer" for RTP connections. Essentially, it's some code that's handed the RTP packets on the transmission end, and it's expected to deliver those RTP packets on the other end. And it doesn't care about how they get from A to B, only that they do.
If you were to replace the UDP socket in that example with a TCP socket, you would be guarenteed not to drop packets due to network reasons. Every RTP packet you were handed by the transmitter, you would then hand to the receiver. There is no guarentee that none of the packets would be cast away as "old" by the RTP protocol itself, but there's also no guarentee any of them would be. It's a crap-shoot at best, but it's certainly worth a try.

Problem with whitespace then loading and saving xml

i do not know how to handle this problem. i modifed a texteditor to send XML to a server and load XML back to the container.
but then i do changes to the Textlayout it shows up like this --->
Text in Container not modifed
Text in Container modifed ---> with space beween the colorchanged string
Text inContainersend and loaded ---> i think this has something to to with the
TextFilter.export(_textFlow,TextFilter.TEXT_LAYOUT_FORMAT,ConversionType.XML_TYPE)
can someone give me a hint...

Hi,
the link is --->
http://www.horstmann-architekten.de/contentmanagment/SimpleEditor.html
its a modified example of the texteditor provided by Adobe. You can send a xml to the server. and also read it from the server. You just use the xml identifer to give the xml a name.
Try it out:
1. change the text and
2. give a XML-Identifer
   and then send it to the server. --> send to server
3. type in the XML-Identifer you have used and
4.   load it from the server ---> Load from Server Button
evering works ok exept the columns formating.
I Think the colums Formating is not embeded in the XML as it should be. I attached the Files. (Newbie programmer)
With best regards
Michael Sprinzl
--- robin.briggs <[email protected]> schrieb am Do, 17.9.2009:
Von: robin.briggs <[email protected]>
Betreff: Problem with whitespace then loading and saving xml
An: "Michael sprinzl" <[email protected]>
Datum: Donnerstag, 17. September 2009, 2:12
Sounds like you have two different issues going on: (1) inline graphics aren't coming out correctly when you use the TextLineFactory, and (2) columns aren't working correctly. It's difficult for me to tell by looking at the application you link what is going wrong. One of the examples does seem to have columns working -- can you be more specific about what you're doing, and what results you are seeing? As for the inline graphics, there is a timing issue involved with using URLs, due to the asynchronous loading. See this comment in the docs for TextFlowTextLineFactory:
Note: When using inline graphics, the source property of the InlineGraphicElement object   must either be an instance of a DisplayObject or a Class object representing an embedded asset.   URLRequest objects cannot be used. The width and height of the inline graphic at the time the line   is created is used to compose the flow.
- robin

Synching audio problem with MPEG-4 video in QuickTime

Hello,
I’m having a problem with MPEG-4 video file I created with TechSmith Camtasia (6.0.1).
Problem: The audio does not sync up with the video when played with Apple QuickTime 7.6 (latest build) in Windows Vista. The longer the video plays the more out of sync the audio is. Here's where it gets interesting:
When I play the file using Adobe Media Player or Adobe Flash Player (plug-in in Internet Explorer), the video and audio sync up and all is good.
Is there a problem with how Quicktime decompresses this type of file?
Does anyone have any idea what is happening?
Thanks,
Leo

If I remember well, N70 plays mp4 video without problems. Try resizing during encoding to 176 x 144 and reducing frame rate to 15 frames per second. Also try to keep data rate below 200 kb/s. If you are using MediaCoder do not go with default settings for Nokia N70, they are too optimistic.
Here is link to document titled Creating Mobile Videos
http://www.forum.nokia.com/info/sw.nokia.com/id/b0c449c1-8e67-4c60-bd50-18a2b4f1e09b/Creating_Mobile...
Hope it helps.
www.2010-solutions.co.za

I have just downloaded OSX Mavericks and am having a lot of problems with my iCloud account. I get a message "this iMac can't connect to iCloud because of a problem with (and then it quoted my e-mail address) Does anybody know what the problem could be??

As mentioned above I have just downloaded OSX Maverick to my iMac. I am now having a lot of problems with iCloud. I get the message that "This iMac can't connect to iCloud because of a problem with, and then it goes on to quote my e-mail address. It then says to open iCloud preferences to fix this problem.
I do this and no matter what I seem to do this message continues to return.
Can anybody explain how to resolve this problem (please bear in mind that I am noy very computer literate).
Many thanks
Mike

Hello John
Sorry I haven't got back to you sooner.
Thanks very much for your help, your solution solved my problem.
Thanks again and kind regards
Mike

How can I talk with more then one person at a time?

How can I talk with more then one person at a time? With Faxe time? Is thier software needed to do this or can it be done with the basic package?

You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

I am still having problems with my music videos freezing (all purchased from iTunes) since the update. Have restarted, rebooted etc. and it is worse than before. Help! Spent a lot of money on these and they won't play properly.

I am still having problems with my music videos freezing (all purchased on iTunes) since the update. The first day of the update, no problems...played 6 hours of music videos and no freezing. Today...every single video froze!!! So frustrating! I rebooted, restarted, powered down and no help. I would appreciate any suggestions. Thanks.

I don't know how to do this without using a mouse point.
This may help, http://www.computerhope.com/issues/ch000542.htm
As for question #2, you call tell how iTunes is sorting songs by the up or down arrow next to a header name.
Even the original order that the songs were entered or date added or last played can be sorted.
Much easier with a mouse or touch pad.

Oracle RAC with more then two nodes?

Hello,
knows anybody a reference client project that use Oracle RAC with more then two nodes on a Linux environment?
Many thnaks!
Norman Bock

Hello Norman,
XioTech is a SAN company that has a project called "THE TENS". They configured and ran a 10 node RH Linux Oralce 9i RAC. I understand they want to see if 32 are possible. I am sure if you ask them, they would be happy to give you the details.
http://www.xiotech.com/
Cheers

Process message characteristic with more then ( ) 30 digits in PI-sheet

Dear all,
I am looking for a solution to populate a process message characteristic with more then 30 digits in the PI
sheet and not during control recipe generation.
I have defined a customer characteristic (with O27C) in the `Additional data for Process Instructions
and Messages` with a length of 40 Characters. Next to that in my process message i added a function
to retrieve the material master text (40 digits) and to put it into the customer characteristic as an output.
However in this set-up I get an sytax error that blocks the generation of the control recipe. The syntax
erro is due to the fact that the long text characteristic should have a value. Obviously it does not,
because I want to retrieve it from the material description. Note that the material number I use to retrieve
the text, is selected in the PI sheet itself an is unknown (unplanned Issue) at generation.
Please advise.
Cheers, Leo
Edited by: L. de Pee on Oct 6, 2009 3:08 PM

Hi.
Its BPM Standard cubeCube , 0BPM_C01 and we are populating 0fiscyear based on Instance-Id.
I have reloaded the cube and maintained Index, checked DB Stat, Roll up , compression all are done, but still facing the same issues.
Please provide me your inputs if you faced the similar issue.
Thanks in Advance.
Br
Alok

I am using Aperture 3 now and I love it. But I would like to purchase or download perhaps some freeware, easy to use photo imaging/editing software with more filters, perhaps layering etc. My Apple mentor suggests Pixelmator or Gimp ?

I am using Aperture 3 now and I love it. But I would like to purchase or download perhaps some freeware, easy to use photo imaging/editing software with more filters, perhaps layering etc. I don't want something with a very steep learning curve, getting to old for that. My Apple mentor suggests Pixelmator or Gimp ? Are there some others out there? When I was still in the Windows world, I used Photoshop Elements but that is now in my past. Any ideas?

Pixelmator or Gimp are both nice tools for advanced image processing and compositing. I.e. Gimp can do pretty much the same as Phtoshop. You might also have a look at digikam http://www.digikam.org/drupal/download/binary
Digikam is not just an advanced image processing and compositing program, it is also content management system like Aperture or iPhoto.
I also find GraphicConverter a nice tool, but it is not free.
If you want your image editing tools to integrate well with Aperture, I would look first at the available plug-ins, start with the plug-ins offered in the Aperture pull-down menu
Aperture -> Aperture Plug-ins...

FCP External Video Playback problem with HDV

Hey all. I just got the Canon HV30 HD camcorder and it is excellent. I am able to import the HDV footage to FCP no problem. I'm recording in 24p mode by the way.
I can't seem to get playback from the timeline back to the Canon so I can see the edited footage on the Camcorder's LCD screen. I've tried everything. All the settings seem to be grayed out. How am I suppose to get my edited footage from the computer back to tape? Help is much appreciated!
Greekappi

I'm not the person at our facility that does this, but we do it all the time. However we are using the Sony HDV decks, 25U or something like that.
I have also seen the stuttering video you described, I'm not sure why it does this on some projects and not others, it is very random. When it does stutter I render out a complete self contained Quicktime and then print to tape from that. However, I occasionally still have this problem with that? But it does seem to help more often than not.

CS6 Playback problems with more then 3 Video Layers

Similar Messages

Maybe you are looking for