CS6 PPro will not render non accelerated transitions

Hi,
I do have a CUDA video card and I'm using the Mercury Playback Engine. I cannot render any of the transitions on my timeline that are not the accelerated type. Of course the accelerated transitions don't need to be rendered. I even tried exporting my short project but the transition I put on the timeline is just ignored.
Here's the error message I get when I try to render one of the non- accelerated transitions.
Suggestions?

It looks to me like you may have 2 situations here.
1. if you are using "render effects in to out(Enter)" Premiere will only render the red sections. Use "render in to out(renders everything in to out)" or "render selection".
2. There is a bug with the Quicktime codec(Adobe Qt server.exe) when you try to export full HD(1920x1080). Renders will fail everytime. It will render up to 720p with no problems though. If you need to export in full HD you can use .mxf wich supports inbedded captions or .mp4(h264).
Hope this helps!

Similar Messages

Flash CS6 - Font will not render as Classic Text, only as TLF

I've been working on a series of Flash animations in which the main font used is Helvetica Neue, which is embedded using the Font Embedding... Menu. Everything was working just fine and then yesterday the font just stopped rendering. I've spent hours thinking that it was an embedding issue-that maybe somewhere the code had been overwritten. But then I opened a new Flash file (AS3) and noticed that I couldn't get a static textfield to display text in the Helvetica Neue font. So then I unintalled my Helvetica Neue fonts and reinstalled them. I cleared my Adobe Font caches and Windows (7) Font caches. I rebooted. Still just an empty text field. Then I tried something radical. I switched the textfield from Classic Text to TLF Text. Well it turns out that TLF textfields display the Helvetica Neue Font just fine.
So what is the deal? In this particular project TLF Text won't work because I have to publish out to Flash Player 8 as part of the project's design requirements. How do I get Helvetica Neue to start working again in Classic Text mode?

If you are on Windows, it could be related to a recent Windows update. Seems to have started yesterday for a lot of people. Check out this thread (or any of the other text related threads from yesterday).
http://forums.adobe.com/message/4916465
The issue is related to the Windows Font Parsers. Maybe TLF uses it's own.

Mac CS6 Bridge will not open

I know this has been discussed a lot on the forums and I have read all of those, but I am frustrated after 3 weeks of working on this. I bouht my wife Photoshop CS6 for xmas and loaded on our iMac running 10.8.2. She was running Elements 8. CS6 Bridge will not open. Get a message "operation can not be completed". It will also not open from inside Photoshop either. Following other posts, went into Library and deleted switchboard folder, plist files, and other listed files. Did an option start on CS6 and reset to factory, delete thunbnails. Performed PRAM and disk permissions repair. None of this has fixed the problem. The only thing that works is creating a new user account. Bridge opens fine in my test account. Next step is to make test account the main account; however, this is going to be a pain. Any other ideas before I undertake this?

Looks like you have tried all the suggested methods, so good job on that. Your solution to create a new account is one that has worked for many where nothing else has worked. This usually means some permission or default setting has not been affected by your actions.
The only suggestion I can offer is to uninstall CS6, run Adobe Script Cleaner, then reinstall. Hope this works.

Illustrator and Photoshop CS6 both will not allow me to print from them

Illustrator and Photoshop CS6 both will not allow me to print from them. InDesign will, but illustrator keeps popping up with "can't print the illustration." i have read other forums and i understand outlining typefaces, and spot colors but, it still will not allow me to print. Even if i open a completely new file and just try to print a black square it will not allow it. the problem might have started with an emailed EPS file? but im not 100 percent sure. i have disconnected and re connected the printer but the problem just seems as if all Illustrator, and Photoshop files will not print from the program and the connection with the printer is non existent (even though it says it is). please help!

Reset your illustrator prefs
Hold fingers over Shift Alt CTLR (PC) or Shift Opt Command (Mac)
Boot Illustrator
Immediately after booting depress the 3 keys as fast as you can.

Videos Will Not Render.

I have been working on some videos recently and Adobe Premiere Elements 9 has been working great for me.... Until today.
When I try to render the videos which had successfully rendered beforehand, they will not render! But it WILL render .05 of a second of a clip. This problem has just risen today and it is annoying the daylights outta me. A bit of backround, I use a portable hard drive to hold all the footage when I make a video because the computers I use do not have enough space to hold all my footage. But this is kinda second guessed because when I make a new file on the pc I am using at the time, make a title, and give it a rendered effect, it will still do the same thing.
I hope to hear from someone soon.

Welcome to the forum.
Just to make sure that I am on the same page, as you, when you say "render," you are speaking of hitting the Enter/Return key, to Render the Timeline, for the smoothest playback. Is that correct?
Now, on your Timeline, when you make a changes, such as adding an Effect, or any sort of overlay, such as a Transition, PiP, or an overlay Title, you will get a red line above that Clip, or portion of a Clip. If one hits the Enter/Return key, ONLY that/those section(s) with the red lines, will Render. However, if I read correctly, you are getting the red lines, BUT not all of that/those Clip(s) will Render. Is that correct?
When only part of a Timeline Renders, the first two things to check are the position/length of the WAB (Work Area Bar). That can become accidentally set to too small a portion of the Timeline. The easiest way to make sure that the WAB has been extended to the full Timeline is to hit the \ (Backslash key), to zoom out to see the full Timeline, and then find the little "box" in the middle of the WAB. Dbl-click on that, to make sure that it has expanded to cover 100% of the Timeline.
The next thing to check, is has an In, or Out Point been set on the Timeline. This can happen accidentally, if the CTI (Current Time Indicator) has been set to some point other than 00;00;00;00, or the full Duration of the Timeline, and the I (eye key) for In Point, or the O (oh key) for Out Point has been hit. The way to look for an In Point, or Out Point on the Timeline, is to look at the Time Ruler, and see if it is a different shade of gray, over Clips, before the end of the Timeline.
If neither the WAB, or a Timeline In/Out Point has gotten set, I have a question: where are the Scratch Disks for that Project set? Especially with external HDD's, I have that location set to "Same as Project," so that all Render files, and the Media Cache, etc., are set to that same HDD.
How much defragmented free-space do you have on the HDD, where the Scratch Disks are set?
If to the external HDD, what is its connection type, i.e. eSATA, FW-400/800, USB, etc.?
For the OS, how much defragmented free-space exists on your C:\?
Good luck,
Hunt

Browser labs will not render any of the websites I have hosted on my server but has no issues render

I just decided to test out browser labs to see if it's something I want to use when developing websites.
Obviously the first sites I would run as a test are my sites that I already know how they render across multiple machines. What is odd is that they will not render at all! I get an error and am told to retry after over 5 minutes of attempting to process.
I then went on to try other websites that I have built and the same thing. Then I decided to go with the tried and true google.com and it rendered just fine!! Then I went back and tried my domains and again, nothing! So i tried facebook.com and it worked!!
I tested all of the domains i could think of that exist on my specific server account and none of them will work! It's very odd.
Any thoughts?

There are a couple things I can think of that might be going wrong...
1. When you give the URL to BrowserLab, it will make multiple simultaneous requests for the page from the web server. We've seen at least one situation in the past where those multiple requests would overwhelm the server and would not or could not respond. Try doing a test where you have only a single browser in your browser set.
2. When some web servers get multiple simultaneous requests coming from a single address, they will interpret it as an attack and refuse to respond. And may log that address and permanently refuse to respond to it. Some additional details are here: http://blogs.adobe.com/browserlab/2011/04/14/browserlabs-egress-ip-addresses/
Are the URLs you tried public and can you post them so we can try them out ourselves?

Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6. Will not open...Error message: could not complete your request because it is not a valid photoshop document.

Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6. Will not open...Error message: could not complete your request because it is not a valid photoshop document.

The file was corrupted somewhere along the way (assuming it was still readable on the Macintosh).
The platforms don't matter, but you still need file transfer that doesn't corrupt files...

AIR application with Flex 4.5 will not render content. What gives?

OK,
So I've upgraded to Flash Builder 4.5 Premium and I am unable to develop desktop AIR applications with the 4.5 Flex SDK. I start by simply creating a brand new AIR application using the default SDK (Flex 4.5). I set the title property on WindowedApplication and include a simple Label component. The project compiles fine but when I run the application all I see is the adl window in the dock but that's it. If I modify the Main-app.xml file to set the visible attribute to true, I will get a small window but there is no content although the output window shows the application swf being loaded. Checking the release version of the Main-app.xml file shows the correct path location to the swf.
Here is what I've tried so far:
Install/reinstall Flash Builder, 4+ times
Downloaded the trial installation twice
Downloaded the SDK's for 3.6, 4.1 and 4.5.0. I then copied each SDK folder and merged the AIR 2.6 SDK with each copy. So now I have 6 SDK versions; one pristine and the other with the AIR 2.6 SDK merged. I then added each SDK individually and created an AIR desktop application for each. Each and every one works fine with the exception of the two 4.5 SDK's. They will not render content.
I created a simple creation complete handler for the application that declares a simple variable and assigns a value to it. I then put a break point on the assignment and it never gets caught. More evidence that the swf isn't getting loaded.
The computer I'm running on is a Mac Book Pro with Snow Leopard 10.6.7. If I create a web project in each of the 6 SDK's, those will work just fine. What the heck is it with Flex 4.5 and the AIR 2.6 SDK on this machine? I have the AIR 2.6 runtime installed as well as a number of AIR applications that work just fine. I also tried my 4.5 test on my windows machine and that worked like a champ.
I am completely out of ideas. Finding information has been difficult because everyone is all about mobile so searching for desktop issues is a losing battle. I realize this is a long email but I'm desperate for help. There must be someone out there that knows more about the low level interaction between Flex 4.5/AIR 2.6 and the OS.

Well, I finally found the issue, a corrupted mm.cfg file in /Library/Application Support/Macromedia. I deleted the file and then adl ran just fine.

Adobe Premiere Pro CS6 (mac) will not completely launch.

After a few weeks idol my Adobe Premiere Pro CS6 (mac) will not completely launch. It tells me a serious error has occurred, it shuts down and the circle continues. I've even reloaded the app and it happens again. I did upgraded to Yosemite but I can't find anyone else having probs with Yosemite. Any ideas. No luck on the adobe site.

>did upgraded to Yosemite
CS6 is about 3 years old... even the latest Cloud versions had to have updates to be compatible... since you have "reloaded" (was that a full uninstall and reinstall?) I have no other suggestions

Imovie will not render photos with ken burns effect

I have started to produce a video and have tried to import photos from both iphotos and straight from desktop however when i do this the red bar showing the state of rendering does not move. The photo will not render and therfor i am unable to use the ken burns effect. Could anyone please give me any idea of what i am doing wrong.
Thanks.

Hi
What file type is Your photos eg .tiff, .pict or .jpg ?
What size are they eg 1Mb, 10Mb or 100Mb ?
How much free space is there on Your internal (start-up) hard disc ?
Ps When ready - Don't use Share/Export to iDVD from within iMovie. Just drop Your movie icon
(with a Star on it) into iDVD theme window.
OR - Your movie project in iMovie will be harmed and You'll have to re-do it ! ! AND
the DVD disc will be severely pixelated - extreme low quality Ds
Yours Bengt W

Rendering - Final Cut will not render clips under any of the 3 choices?

Final Cut will not render clips mov, or dv under any of the 3 choices, including stuff I have done before.

I realize your problem is solved, but I thought I would post this is case it might helps others in the future.
Under Sequence-->Render--> OR Sequence-->Render All--> OR Sequence-->Render Only--> make sure you have check marks next to all the different video types ("Needs Render", "Proxy", etc).
If there is no check mark, then the video won't render - and this can sometimes seem random, like what happened in your case.

Missing render file/project will not render

I'm new to using FCE - just got my iMac with FCE pre-installed a few weeks ago - and have run into a big problem with current project. When I open the program, it tells me one render file is offline and I can reconnect or continue. I have no idea where the file could possibly have gone, so I select 'continue'. But now the project will not render. I have four sequences open in the project file, and have tried everything - locking and unlocking tracks, selecting various combinations of render both, render all, render selection, rendering only audio or video, etc. All the appropriate render selections are checked in every option. But still, the project won't render any of the sequences; the render box comes up for a split second and goes away faster than the eye can follow. I've tried setting the scratch disk; that didn't help. I tried saving the project, closing and opening the project, etc. Nothing helps. It just won't render. Does anyone have any idea how I can fix this problem?

When I say it won't render, I literally mean nothing happens when I hit the render command. I see the red timeline render bars. However, I see them only when I go to export the video as something else - a mov, dv stream, etc. In the project while working, there's nothing indicating render is required.
To try and solve this problem of the missing audio clip, I opened a new project and imported the .mov file I was working with initially, which theoretically should have all its parts intact. I made the necessary modifications to the file (essentially starting all over) and then attempted to render. It still won't render. Nothing happens at all when I click any of the render options, even after I've made modifications to the video that would clearly require render - changing the aspect ratio and applying a widescreen video filter. So the program should recognize the changes and render, but nothing happens, whether I choose render from the menu or hit the keyboard shortcut.
I'm a little hesitant to try scrapping the preferences as suggested above, but I am totally perplexed.

My Photoshop CS6 Extened will not upgrade to Photoshop CC.

My Photoshop CS6 Extened will not upgrade to Photoshop CC

Photoshop CC is a seperate application. Updating CS6 will not convert your application to CC. You must download the CC app seperatly from the Creative Cloud App
Hope this helps!
Julia

Suddenly fla will not render to swf; freeze; CS3

I have been making swf's for a long time, but suddenly today, my last one for a project,
it will not render, and program freezes solid. What should I do? The fla seems ok.
preview in html will not work. Restarts and permissions did not work.
AS 2.0 Flash CS3

In case anyone else has this problem, I solved it myself before getting any response from Adobe. I am on a Mac and the problem was a corrupted FLEXnet Publisher (the licensing system) caused, I think, by making a bootable clone of my HD. Adobe has the solutions here:
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html.
In my case I just deleted the Flexnet Publisher folder from HD>Library>Preferences and replaced it with an older backed-up version and then CS3 worked again.
If you are on a PC google Adobe Flexnet Publisher and there are solutions out there.

CS6 Suite will not install in disk insertion, why?

CS6 Suite will not install on disk inseertion, why not?

Open the disk manually and run the setup.exe/install.app
Mylenium

CS6 PPro will not render non accelerated transitions

Similar Messages

Maybe you are looking for