CS6 Problem on Windows Dragging/move

I saw this problem a few day before and this is something that need to pay attention, the problem started when I had a multiple tab to do
a work, then I put some tabs windows and drag to the left to make my drawing more easier base on the reference on the left
and suddenly the tabs goes crazy and always started to move up
I've found the solution by autohide the taskbar, but it really not confortable because taskbar are usefull at the sametime

Hi All,
Its a known issue and we are working on this.
Please refer this document for the workaround : http://helpx.adobe.com/photoshop/kb/images-pop-menus-moved.html
Thanks,
Baljeet

Similar Messages

  • Adobe Photoshop cs6 problem - it closes after ''move tool'' button

    After I push Move Tool button I cannot use any of the buttons bellow in that tool bar, when I try any button after it on closes the program with windows error ''adobe photoshop cs6 has stopped working''
    os: win 7 64bits.
    other adobe installed : adobe dreamweaver cs6

    OK, it seems to have been narrowed down to the video driver, or to its settings.
    What make and model video card do you have?
    What is the number and date of the installed driver?
    For OpenGL, what are your performance settings?
    Good luck,
    Hunt

  • Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine  without problems

    Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine  without problems? I have over 400 GB,s  free disc space (c drive) and still am getting lots of errors and program closing problems.  I do not have USB3 on my machine so if I purchased a few 256  GB ssd drives would this help it from crashing?
    Thank you in advance for any guidance.
    Message was edited by: jackg032

    jackg032 wrote:
    Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine  without problems? I have over 400 GB,s  free disc space (c drive) and still am getting lots of errors and program closing problems.  I do not have USB3 on my machine so if I purchased a few 256  GB ssd drives would this help it from crashing?
    Thank you in advance for any guidance.
    Message was edited by: jackg032
    Jack, as Curt has suggested, available drive space comes well down the list regards a happy experience with Photoshop.   You have also asked a self-defeating question, because the fact you are running Vista, and a 32bit version at that, more or less precludes the ability to run without problems.
    Windows 7 was billed as the first MS OS to need less system resources than its predecessor.  If your system hardware will support 64bit, then consider paying $90 for an OS upgrade  What is your system out of interest?  I have a feeling you are running with just 2Gb RAM, which just isn’t enough.  Post your specs or make and model, and I am sure you’ll get some help with what your mainboard will handle by way of RAM and whether it will support 64bit.

  • Dans Adobe photoshop 12 je suis incapable d'ouvrir un Fichier.MTS le systeme m'informe qu'il me manque un CODEC je suis capable d'ouvrir le meme fichier avec le lecteur window média  je n'Ai pas de probleme avec les fichiers .MOV j'ai lu sur les forums il

    Dans Adobe photoshop 12 je suis incapable d'ouvrir un Fichier.MTS le systeme m'informe qu'il me manque un CODEC je suis capable d'ouvrir le meme fichier avec le lecteur window média  je n'Ai pas de probleme avec les fichiers .MOV j'ai lu sur les forums il me semble que j'ai un conflic de CODEC je suis incapable de solutionner SVP m'aider a corriger le probleme

    Ok, je n'avais pas ouvert ton fichier.
    Je pense que le problème vient plutot de la construction du cluster. Je suis même étonné que tu n'ais pas d'autres données propres au format Cluster.
    As-tu essayé soit d'appeler 3 fois ta fonction d'écriture (1 fois avant pour la donnée 8888 d'initialisation, 1 fois pr le tableau, et 1 fois pr la donnée de fin) mais je pense que cette solution n'est pas très optimisée côté performance.
    Ou sinon de modifier ton tableau en incluant tes données de début et fin directement dans le tableau avant de l'écrire dans le fichier?
    Je regarde de mon côté également.
    Cordialement,
    Olivier L. | Certified LabVIEW Developer

  • HT204382 Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no d

    Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no diference

    Download and install the free VLC for Mac - that should work:
    http://www.videolan.org/vlc/download-macosx.html

  • Is there still problems with cs6 and  hidpi windows laptops?

    I consider to buy a windows laptop with a high resolution (3200x1800) but only if i can get photoshop, illustrator and indesign work??

    What is it that you are asking? There never was HighDPI support in CS6 on the Windows side and there never will be. Nobody goes back and reworks 3 year old software just because the hardware industry decided that HD monitors are no longer good enough...
    Mylenium

  • Photoshop CS6 Lag in windows 8

    Hello,
    I did a search in the forum, but couldn't find something specific to windows 8.
    When photoshop CS6 was released. I took it for a spin on windows 7. Everything worked perfectly. Then my school offered it at a reduced price and we got a free version of windows 8. So i thought, why not?
    Now i can't even use it! every time i use any tool that draws on the canvas, i get a horrible delay and the movements of the pen (Wacom create tablet) do not even register. I can't really do anything efficiently with PS now! My computer is old, I know that, but everything worked well (no OpenGL though) on windows 7, I am only seeing this in windows 8. I tried using the tablet with other drawing applications (mypaint, GIMP), works perfect! Really strange!
    Here's what I tried so far:
    1- disable tablet service (renamed to touch keyboard in windows 8), I read it would interfere with PS, no luck!
    2- disabled flicks, didn't help
    Here are my specs (don't laugh, as I said, I'm only using PS in basic mode, my laptop is 5 years old):
    AMD Athlon X2 (dual-core) TK-57
    ATI Radeon HD X1200
    Wacom Create
    Windows 8 x64
    4GB of RAM
    This is really a deal breaker for me with windows 8. i'm seriously considering a downgrade right now! I would like to avoid that, though, so any help is much appreciated.
    WishingStar
    Edit:
    Okay, this is really strange! I've been working on a big project for school since christmas, so i wasn't able to test everything. I just closed PS and reopened it, now there is no lag! But now the pen buttons don't work! (I have to do the stupid windows click and hold to right click) and the pen eraser doesn't work at all (it works just like the pen tip!)
    Now when I did that, Windows somehow decided to turn flicks back on! I turned them off and the lag returned! What is going on here?
    Message was edited by: WishingStar5

    I can only tell you this:  I have Photoshop fully updated to 13.0.1 and it works just fine in Windows 8.  But I don't have the full Creative Suite as you do.
    I really suspect there's something else gone wrong on your particular system, perhaps having to do with the display driver or something in particular you installed coincident with the installation of the Adobe updates.
    On a hunch, does Photoshop get any better behaved if you do the following?
    1.  Go into Edit - Preferences - Performance.
    2.  Uncheck [  ] Use Graphics Processor.
    3.  OK out, then close and restart Photoshop.
    I mention this because there are some known display driver problems with Windows 8, especially with ATI video cards/interfaces.
    Best of luck in getting to the bottom of this.
    -Noel

  • Encore CS6 Dynamic Link from Pr CS6 Problem/Issue

    I switched from Production Premium CS5 to CS6.  I first deactivated and uninstalled my CS5 then installed CS6 on my Windows 7 machine.
    The problem:
    When I edit together a video in Premiere CS6 and have finished, I use Dynamic Link from within Encore CS6 to bring in that timeline.  After that, I use AME to transcode that Dynamic Link asset to the DVD MPEG standard, Encore CS6 keeps poping up a  notification window that says:  "The transcoded DynamicLink asset _______ has changed on the server.  Would you like to reimport it?  Yes/No" It prompts me each time I enter Encore and any time I move from another open program back to Encore.
    And I have to click No for each timeline that I have used Dynamic Link for (which is usually 5 or so).
    Any ideas or help?  This is incredibly annoying.
    Thank you.
    Jared

    As an update.  I am using the newest version of PluralEyes (v 2.0.5  7358) to sync the audio of the multiple camera event films I have shot.  I have since created a new project in Premiere and only manually lined up clips and then Dynamically Linked that to a new Encore project and so far Encore has not promtpted me with the error/message:  "The transcoded DynamicLink asset _______ has changed on the server.  Would you like to reimport it?  Yes/No"
    Any ideas?  This is very frustrating.  Thank you!

  • Avi plays in Windows Live Movie Maker but probs in Quicktime and Premiere Pro

    Hello,
    I'm completely new to Premiere Pro and am trying to edit a recording of a webinar for work.  I have it in both .avi and .wmv formats but can't import either into Adobe Premiere Pro CS6 or CS5.5.  They both play in Windows Media Centre, Windows Live Movie Maker and Windows Media Player, but the audio is corrupted and no images appear when I play in Quicktime with the avi and when I try to play the wmv in Quicktime it says the file is not in a format that Quicktime understands.  When I try to import either into Premiere Pro I get the error message "Unsupport format or Damaged File".  I've used Gspot to determine that the codecs I need are installed and am at a loss in terms of what to do next.  I've spent literally hours on this and would dearly love some help.  Can anybody shed light on my problem?  With many thanks in advance.  Shan

    Hi Jim,
    It said 0x0055 MPEG-1 Layer 3, 44100Hz  128 kb/s tot , Stereo for the audio
    and H264, H.264/MPEG-4 AVC for the video.
    Thanks for looking at this for me.

  • Problems with ListViews Drag and Drop

    I'm surprised that there isn't an Active X control that can do this more
    easily? Would
    be curious to find out if there is - although we aren't really embracing the
    use of
    them within Forte because it locks you into the Microsoft arena.
    ---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
    PM ---------------------------
    "Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
    Please respond to "Stokesbary, Michael" <[email protected]>
    To: "'[email protected]'" <[email protected]>
    cc:
    Subject: Problems with ListViews Drag and Drop
    I am just curious as to other people's experiences with the ListView
    widget when elements in it are set to be draggable. In particular, I am
    currently trying to design an interface that looks a lot like Windows
    Explorer where a TreeView resides on the left side of the window and a
    ListView resides on the right side. Upon double clicking on the
    ListView, if the current node that was clicked on was a folder, then the
    TreeView expands this folder and the contents are then displayed in the
    ListView, otherwise, it was a file and it is brought up in Microsoft
    Word. All this works great if I don't have the elements in the ListView
    widget set to be draggable. If they are set to be draggable, then I am
    finding that the DoubleClick event seems to get registered twice along
    with the ObjectDrop event. This is not good because if I double click
    and the current node is a folder, then it will expand this folder in the
    TreeView, display the contents in the ListView, grab the node that is
    now displayed where that node used to be displayed and run the events
    for that as well. What this means, is that if this is a file, then Word
    is just launched and no big deal. Unfortunately, if this happens to be
    another directory, then the previous directory is dropped into this
    current directory and a recursive copy gets performed, giving me one
    heck of a deep directory tree for that folder.
    Has anybody else seen this, or am I the only lucky one to experience.
    If need be, I do have this exported in a .pex file if anybody needs to
    look at it more closely.
    Thanks in advance.
    Michael Stokesbary
    Software Engineer
    GTE Government Systems Corporation
    tel: (650) 966-2975
    e-mail: [email protected]

    here is the required code....
    private static class TreeDragGestureListener implements DragGestureListener {
         public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
         // Can only drag leafs
         JTree tree = (JTree) dragGestureEvent.getComponent();
         TreePath path = tree.getSelectionPath();
         if (path == null) {
              // Nothing selected, nothing to drag
              System.out.println("Nothing selected - beep");
              tree.getToolkit().beep();
         } else {
              DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
                   .getLastPathComponent();
              if (selection.isLeaf()) {
              TransferableTreeNode node = new TransferableTreeNode(
                   selection);
              dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
                   node, new MyDragSourceListener());
              } else {
              System.out.println("Not a leaf - beep");
              tree.getToolkit().beep();
    }

  • CS6 problem. When I open the Mask panel, it takes up the entire screen width and the Looks controls disappear, Also, there is a new panel below the Mask panel that seems to have no purpose that I can find. The documentation says "Mask and Look panels - Th

    CS6 problem. When I open the Mask panel, it takes up the entire screen width and the Looks controls disappear, Also, there is a new panel below the Mask panel that seems to have no purpose that I can find. The documentation says "Mask and Look panels - The Mask panel is now placed next to the Look panel. WIth the masking and grading tools placed side-by-side, you can now work faster on the mask workflow." Is there a way to move, hide, or otherwise manipulate the panels for a custom layout? All the examples I can find on the Web show the Looks panel to the left of the Mask panel where the controls are available.

    Ok, here is what I have so far. Appdelete the iWork and reinstalled. Pages and Number work, but not Keynote.
    Now, I downloaded a couple apps that I need, and no matter what I did, the spinning ball came up and the download stopped till it unlocked itself. It is really frustrating because the download was not completed and whatever came through would not mount. Could this issue be the internet connection? Permission fix showed a lot of Airport issues. I will try to run permissions fix again.

  • Problem loading window component more than once

    I have a swf with a button that opens a window component
    (from my library). it loads fine and also closes fine when I click
    the close button in the window. but when I try to open the window
    again, it actually loads again, but it stalls and locks up
    immediatley. can anybody tell me what is wrong with my code? I also
    was going to have different buttons to open different windows (each
    swf playing a song and has written lyrics). it does the same thing
    when i load the first window, close it, then try to open a second
    window. it stalls and locks up.
    please, I really need some help!

    Ok it sort of works... here is my code:
    on (release) {
    trace("button works");
    win.title = "Yellow Birthday Package";
    win.closeButton = true;
    win.contentPath = "yellowPack";
    win.setSize(550,500);
    var listener:Object = new Object();
    listener.click = function(){
    win._visible = false;
    win.addEventListener("click",listener);
    It order to make it work, the window component has to be on the stage but i want it to popup only when the user clicks on the button. So the window should be hidden/invisible when the page first loads. I tried changing win._visible = true; but that did nothing.
    The other problem is that the movie clip inside the window, isnt aligning center. i can only see a corner of the movie clip. in the top left. I havent tested the whole thing live though!

  • Problem with Windows 8.1 and Corseca Byte BT headset

    I recently bought a Corseca Byte bluetooth headset.
    The headset works fine with phones.
    Initially when connected to the laptop running windows 8.1 it works well and continues to flawlessly for hours.
    The problem is when the headset is connected to the laptop but there is no audio streaming (e.g paused a movie playback for attending some other job) and resume playback after 10-15 minutes the audio starts stuttering/ becomes choppy. If I switch off the headset
    and restart it works fine unless it lays unused for some time.
    Windows recognizes the device correctly. I've turned off power management for BT devices and tried to update the drivers without any positive result.
    Initially I thought the headset was defective but since it works flawlessly with phones I think it is a problem with Windows 8.1.
    How to solve the issue?

    Hi,
    Have you also tried to disable power management on wireless network connection adapter? Since some OEM computers also combine some features of Bluetooth to wireless network connection adapter.
    This issue can be mostly caused by drivers. Please contact the menufacturer's to see if the latest driver is compatible with Windows 8.1.
    If not, I suggest you find the driver for Windows 8 /7 and install it in compatible mode in Windows 8.1 to see what's going on.
    Also, post back the C:\Windows\Inf\setupapi.dev.log and event log you can find in event viewer related to this issue here for our research.
    Kate Li
    TechNet Community Support

  • Photoshop CS6 - Problems with Canon Easy PhotoPrint Pro!

    Hi,
    I have been a user of Photoshop for years, starting with CS2, and upgrading regularly.
    Currently, I have Photoshop CS6, working on Windows 8, 64 bit! 
    With every version of PS, I have installed a Canon add in, called Easy Photoprint Pro.
    I have found that this provides the best colour match (monitor/Canon Pixma Pro 9000 printer).
    With CS 6, I find that as soon as I try and run Easy Photoprint, Photoshop stops working and closes down! (File >> Automate >> Easy PhotoPrint)
    I have down loaded both the latest versions of PS from Adobe com, and Easy Photoprint Pro, from Canon - The latter is claimed to be compatible with Windows 8 and Photoshop CS 6.
    I have tried disabling all other programs, at start up, and disabling all non Microsoft services; also disabling my Security suit!
    I would be interested in hearing if anyone has experience this problem, and has a solution

    The problem has been resolved, I think! For anyone interested,
    (1) I completely uninstalled all Adobe and Canon software and drivers!
    (2) I then deleted all Canon and Adobe folders on my C drive (Program Files & Program Files X 86).
    (3) I then ran REGEDIT and deleted All Canon and Adobe Keys!
    (4) I then ran CCleaner Registry cleaner!
    (5) I then Restarted my computer!
    (6) Finally, I reinstalled Photoshop (Updated on line); reinstalled Easy Photo Print and my Canon Printer Driver!
    THIS DID NOT RESOLVE THE ISSUE!
    I then repeated steps (1) to (5), but started my PC in SAFE MODE!
    I then repeated step (6); namely:I reinstalled Photoshop (Updated on line); reinstalled Easy Photo Print and my Canon Printer Driver!
    THIS APPEARS TO HAVE CLEARED THE PROBLEM

  • Photoshop CS6 Problems

    I have installed photoshop cs6 on my computer (Windows 7) but the programm is a bit useless since it can't create or open files.
    I tryed reinstalling all my adobe programms 3 times but photoshop still won't work.
    Do you have an idea how I can make the programm work?
    thanks in advance

    Thanks for you email, I finally went to an informatician today. We
    finally found out that even if windows 7 sais the drivers are up to date
    the driver that is managin to switsch between the two graphic cards
    wasn't up to date. We downloaded it from the website and photoshop works
    now perfectly well.
    Thanks for your help!
    Emmanuel Dorsaz
    Le 09.09.2012 21:14, Manish-Sharma a écrit :
    >
          Re: Photoshop CS6 Problems
    created by Manish-Sharma
    <http://forums.adobe.com/people/Manish-Sharma> in /Downloading,
    Installing, Setting Up/ - View the full discussion
    <http://forums.adobe.com/message/4685059#4685059

Maybe you are looking for