Cs6 problems with gtx 780 cuda

hey i have problems with cuda with my gtx 780 when i try to see my cuda version in after effects i cant see the cuda setting and in premier pro i cant enable cuda acceleration i have added pictures

Hi Oriagranat9,
Please check the links below for the supported cards on Premiere Pro & After effects CS6.
http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-premiere-pro.html#Ad obe%20Premiere%20Pro%20CS6%20system%20requirements
http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-effects.html#After Effects CS6 system requirements
make sure that for CUDA/Ray tracing you are using one of the cards listed on the pages.
Thanks

Similar Messages

P67A-GD55 problems with GTX 780

I have the same problem as the guy in this thread:
https://forum-en.msi.com/index.php?topic=169438.0
I can´t access the BIOS with the GTX 780. I just get a black screen with B2 code for 2-3 minutes and then
it boot up windows.
I have used Live Update 5 to upgrade to the latest bios (Live Update says the new 1.J0 version is the latest)
but the problem is still there.
If i want to access the BIOS i have to switch the cards :(
My system:
I7 2600k
P67A-GD55
2 x 4 Corsair DDR3
GTX 780 (previous card was a GTX 580)
Win 7 64-bit
Help would be much appreciated

Quote from: Ywap on 04-June-13, 02:41:05
I can´t access the BIOS with the GTX 780. I just get a black screen with B2 code for 2-3 minutes and then
it boot up windows.
New graphic cards need 4.XX bios.
The last is 4.30 bios.
You have to download the archive here : https://forum-en.msi.com/index.php?topic=164135.0
An use this archive with MSIQ USB Bootable tool downloadable here : https://forum-en.msi.com/index.php?topic=116721.0
Use Method 1: Processing a BIOS Archive Directly (ZIP/RAR).
Then clear CMOS.
Then Reboot and SUPPR button to enter the bios
Dont upgrade Intel Management Engine drivers to v8, because you have i7 2600K sandy bridge processor. Stay with IME v7 drivers
Goog luck

Bug with GTX 780, reboot loop 2 seconds

My X510 is el diablo ! lot of problems... lot lot lot... I have a GTX 780 KFA², it's a good, very good... but when reboot x510 (restart windows/computer) is reboot loop every 2s... windows off... power supply make 'clac' (i suppose 'off') 1s... power supply 'clac' (on) and i have not time to see lenovo logo on display, power on approxymatively 2s ... and power supply 'clac' (off) 1s... power supply 'clac' (on) ... loop mode.... i do unplug the power cable for 20 secondes and replug to restart correctly the x510...

You have to switch to a ME8 bios (latest) or the GTX780 won't work. Alternatively buy a newer Z77 board. Older bios versions of your board are too outdated for latest generation GTX7xx boards. Indeed oc will be limited with a ME8 bios howerver but besides not using the vga or using a different board there is no other option.

Photoshop cs6 problems with win8

Problem with cs6 on windows 8 64bit error.
Could not open a scratch file the file is locked...
I change the scrath file in photoshop properties to another place. and some error accured.
Also while open it as administrator it's work but, no Drug and Drop working.
Also I Install Update 13.0.1
Please Help

Noel Carboni wrote:
Building a test environment to double check a stock Windows 8 config and Photoshop CS6 is going to take some time.
As it turned out, not so much.
I had saved a snapshot for a Windows 8 x64 virtual machine when I first installed it, and sure enough I was able to restore that snapshot and install Photoshop successfully in just minutes with no problems.
I was able to run Photoshop CS6 x64 13.0.0 just fine.
I then updated to 13.0.1, which again went without a hitch, and now I'm able to run Photoshop CS6 13.0.1 x64 again without problems.
Note that this is a bone stock, freshly installed Windows 8 system without any tweaks whatsoever. There is just a C: drive and Photoshop's configuration is the stock out-of-box-experience.
I've tried some general dragging and dropping - e.g., of images from Explorer to Photoshop, of layer data from one document to another - with no problems.
I even shut down the virtual machine, added a disk drive (D:), then asked Photoshop to use D: as scratch. It had no problem with that either.
I am willing to say definitively at this point that there is no systemic problem with Photoshop CS6 and WIndows 8 x64 out-of-the-box, though that's not to say there aren't classes of problems with particular video drivers or on systems where the Windows 8 system was installed as an upgrade to an existing system - or even as a clean install but with disk volumes left over from a prior system.
That last scenario is the one I see causing the most problems - that of having a disk drive formatted under a prior version of Windows, which would have had a different Security ID, and not setting the ownership and permissions so as to allow access by the current username.
-Noel

Photoshop CS6 problems with Lion OS!

I am a Mac user of the creator suite and have not upgraded to the Lion OS because of many reported problems with Photoshop and lightroom running under Lion. Does anyone know if CS6 and Lightoom 4 have similar problems, or has Adobe fixed them in these versions?

tamashebi wrote:
I am a Mac user of the creator suite…
"Creator suite"? Yeah, right…

I have Photoshop CS6 problem with Win8

I had Win7 and didn`t have any problems but I bought Win8 upgrade and I install it without any changes of my PC settings ... that was option offered from Win8 insatallation manager.
My problem with Ps CS6 is next my files are open as a tabs and when I "move" image with hand tool the paste board flashing from dark grey to transperant...very anoying.
Sometimes when I "scale" image with move tool image area get black and I can`t see the image scale...
How to fix that Please help I can`t work with normal concentration...very anoying Please help?

Flickering is a known problem with Win8. We and the GPU vendors are working with Microsoft to get it fixed, and seeing if we can implement workarounds until the fix arrives.
The image going dark also means a display driver problem.
You can try turning off GPU drawing in preferences, or setting the GPU mode to basic, for the time being.

CS6 Problem with Custom Paper Sizes

When printing on Epson printers (4800,4880,4900) in the Photoshop print settings dialogue box it won't allow me to print at a custom paper size using the sheet or manual feed settings. The paper feed option defaults to Roll Paper when I create the custom paper size, and then when I change it and try and save the settings it just reverts back to roll paper. If I try and send a print after this then the printer won't accept it because it's being told to print on a roll instead of sheet. Why is this?? I'm using CS6 and OS 10.7 and I've never experienced this problem with any previous Photoshop/ Mac OS X before. Please help!

I use a pc therefor Windows and PC Photoshop. Anyway The way this works in Philosophy windows print dialog you have to set both Photoshop print settings and the printer driver settings. And if Photoshop is to handle colors you must set off the device drivers color management. Photoshop Dialog has a printer setting button. I use that to set the device driver setting like color management off, print quality and custom paper size and source roll paper.
I also wrote a script to tile image into a document for printing on roll paper and eliminate paper waste. http://www.mouseprints.net/old/dpr/PasteImageRoll.html

Problem with gtx 580 lightning total available graphics memory

i got a problem with total available graphics memory with my gtx 580, it shown 3315MB only in nvidia control panel.. but i just saw people with same gpu with me has 4000+MB..
can someone help me please, i need to increase it to 4K+MB
my mobo is asus p8z68-v
and 4GB of RAM 2GBx2
CPU: i7 2600k

Quote from: limousine on 14-October-11, 19:17:12
i got a problem with total available graphics memory with my gtx 580, it shown 3315MB only in nvidia control panel.. but i just saw people with same gpu with me has 4000+MB..
Nvidia panel displays complete rubbish.
They also count some system memory with the amount of vga memory, which, with dedicated videocards these days, is to no point, since the card will never be able to use it.
Your card has, like Svet already said, 3072MB dedicated videomemory and thats all its gonna utilize, since thats the amount of VRAM on the pcb.
So your buddies with 4+GB VRAM are just showing off stuff they cant use and Nvidia controlpanel shows numbers and amounts of VRAM, you'll never have available, just like that stupid Windows Performance Index shows some numbers about your system that in reallife mean diddlysquad.
Besides, there arent any 580GTX's outthere with more then 3GB VRAM aboard.
Long story short, dont get all hyped up by numbers, you got what you paid for and there's nothing wrong with your amount of memory on that card.
Edit:
With my system Nvidia says I got 3071MB of video-memory available, but 1280MB is dedicated, dedicated being the true amount the card wil ever use, since my card has only 1280MB and not 3071MB.
Like I said they count some system-memory with it, although the card will never ever be able to use it, its just to screw people over.

CS6 problem with Apple Yosemite on iMac

I have a huge problem with my 27" imac having upgraded to Yosemite - bridge is working fine but when I open a photo from bridge into Photoshop I get a montage of images and abstract boxes instead of the photo - If I quit PS and start again it works fine for about 2-3 images then it starts doing the montage thing again - I have had no problems at all for years until this latest upgrade - any suggestions ??

You're hitting some of the video driver bugs in Yosemite.
You can turn off GPU drawing in Photoshop's preferences, then restart Photoshop.
But that disables all the GPU dependent features -- if you need some of the GPU features, then you probably should downgrade to a more stable MacOS version.

CS6 problems with using Zapf Dingbats font

The same font file works perfectly in QXpress (9.5.3) but not in Illustrator (16.0.0) and even less signs show in InDesign (8.0).
I work in Mac OS 10.6.8.
My old ITC Zapf Dingbats was a PS Type 1 font from the last century, version 001.001. (I have not used Dingbats in InDesign yet. I dug up QuarkXPress again today to check and all dingbats work fine there while) InDesign only displays half of them. Then I bought an OTF (Version 2.066;PS 005.000;hotconv 1.0.67;makeotf.lib2.5.33168) of this font today and installed it – with worse results: next to none display in ID.
(I test with a font size of 18 pt.)
I can reach all dingbats via the Glyphs command though, but that's not the idea, is it? They should be under the keys for quick access!
Might have something to do with InDesign's font substitution settings but I don't know where to access them.
(There was a similar question – https://forums.adobe.com/message/1280829#1280829 – but that was over six years ago. I hope there is a smarter solution by now…)
Fred

I never even knew there was a Dingbat fix, as I never had a problem with the font and Frame before.
In Frame 8 all the characters disappeared. When I print to a pdf, I get an error message thusly:
%%[ ProductName: Distiller ]%%
%%[ Error: ZapfDingbats not found. Font cannot be embedded. ]%%
%%[ Error: invalidfont; OffendingCommand: findfont ]%%
Stack:
/Font
(ZapfDingbats)
false
/2
0
/F0
false
/ZapfDingbats
I get no such error message with Frame 7.
Now, I took my elderly Zapf Dingbats font and ran it through Fontographer--I didn't change a thing, I just generated a new Type 1 font. Frame 8 was happy with that one, but Frame 7 displayed some other font instead. I have no idea what the font is, it kinda looks like Arial.
Scratching head...

Photoshop CS6 - Problems with Canon Easy PhotoPrint Pro!

Hi,
I have been a user of Photoshop for years, starting with CS2, and upgrading regularly.
Currently, I have Photoshop CS6, working on Windows 8, 64 bit!
With every version of PS, I have installed a Canon add in, called Easy Photoprint Pro.
I have found that this provides the best colour match (monitor/Canon Pixma Pro 9000 printer).
With CS 6, I find that as soon as I try and run Easy Photoprint, Photoshop stops working and closes down! (File >> Automate >> Easy PhotoPrint)
I have down loaded both the latest versions of PS from Adobe com, and Easy Photoprint Pro, from Canon - The latter is claimed to be compatible with Windows 8 and Photoshop CS 6.
I have tried disabling all other programs, at start up, and disabling all non Microsoft services; also disabling my Security suit!
I would be interested in hearing if anyone has experience this problem, and has a solution

The problem has been resolved, I think! For anyone interested,
(1) I completely uninstalled all Adobe and Canon software and drivers!
(2) I then deleted all Canon and Adobe folders on my C drive (Program Files & Program Files X 86).
(3) I then ran REGEDIT and deleted All Canon and Adobe Keys!
(4) I then ran CCleaner Registry cleaner!
(5) I then Restarted my computer!
(6) Finally, I reinstalled Photoshop (Updated on line); reinstalled Easy Photo Print and my Canon Printer Driver!
THIS DID NOT RESOLVE THE ISSUE!
I then repeated steps (1) to (5), but started my PC in SAFE MODE!
I then repeated step (6); namely:I reinstalled Photoshop (Updated on line); reinstalled Easy Photo Print and my Canon Printer Driver!
THIS APPEARS TO HAVE CLEARED THE PROBLEM

Photoshop to Illustrator (CS6), problem with linked images

Hi,
I have a very frustrating problem when importing .psd files to Illustrator CS6. I recieve files from an artist and have to make some sort of pre-print on them, add texts etc..
They are multi layer and upon opening in Illustrator I select Convert Layers to Objects. After that every bitmap layer in the file is converted to a link, and this is where my problems start. First of all it would simply be most conveniant if I had the option to embed all upon import.
But even with this option lacking, I should be able to highlight a link in the Links panel, and select Embed image from the drop-down menu. Unforetunately this option is always disabled, same with the Embed button on the control toolbar when the liked image is selected. Furthermore, the link information option always shows empty name and locations fields, so its impossible to know which files I should attach if I would like to send them to print as links together with the .ai file. Even when I do know which file it is in, how should I collect them together so that there are no broken links on the other side?
I simply don't understand how to manage those links or whats the best way to avoid them. It has gotten to the point where I save each layer in Photoshop separately as .pdf and place them in illustrator manually, but there has to be an easier way. Even when saving in .tiff in photoshop and selecting "place" with the "link" option unchecked in illustrator, it will still place it as a link. On the other hand when placing pdf files in illustrator they import as "Non-native art" which as I read can also cause troubles with colors etc.. Can somebody please help me make sense of it???
I work in Windows 7 64 bit and have Adobe Design & Web Premium CS6.

When an Illustrator AI file is saved with PDF compatibility it contains of 2 forks, the one contains the whole file for editing in Illustrator (which makes it important ot choose the correct comptibility of Illustrator version) and the other contains the pdf part. If you use such an ai file with pdf compatibility to place in InDesign, Photoshop or even in Illustrator these programs use the pdf part.
The pdf part should be complete even if the linked files are missing, so it is possible to open an ai file in Acrobat or Reader. The pdf part is also a rich PDF which contains all coors and transparency.
From Illustrator CS6.1 forward it is possible to extract embedded images. And it is a good tradition in all programs to have all embedded files listed in the link panel.

Z77A-G43 PCIe 3.0 problem with GTX 660

Hello,
I have built a new computer with the components described above.
There is no video signal output from my GTX 660 when it's connected to the PCIe 3.0.
It's OK when the GTX 660 is connected to the PCIe 2.0.
When GTX 660is connected to PCIe 3.0 there is no signal output even from the onboard video card.
That's mean I don't see bios display or Windows, it's not a windows 7 problem.
Sometimes after connected GTX 660 to the PCIe 3.0, the bios stop and start few times the computer, always without video signal anywhere.
Then It's seems that Windows 7 boot (without display), but there is no sound when Windows 7 is loaded or when I quit Windows 7 (I enter blindly my password, then do Alt-F4 and enter , and Computer stop).
I try to reset CMOS, setting in the bios PEG or IGD but nothing good.
The bios version was 2.8, I flash it to E7758IMS.293 but same problem.
This GTX 660 is a PCIe 3.0 compliant !
Any idea ?
Thx for your help

Quote from: mastermylord on 24-February-13, 03:31:09
i use i7 2600
http://ark.intel.com/products/52213/Intel-Core-i7-2600-Processor-8M-Cache-up-to-3_80-GHz
PCI Express Revision : 2.0
p.s.
You don't need PCI-E 3.0 for GTX 660.
The PCI-E 2.0 bandwidth is more than enough for your GPU.

Problem with GTX 560Ti Twin Frozr II OC SLI

Hi. I just bought another GTX 560 Ti Twin Frozr for SLI and when I ran BF 3, the images are shaky. Here's my specs:
i7 920 2.66GHz
Asus P6T
6 x 2GB Corsair 1600 DDR3
2 x GTX 560Ti Twin Frozr II
1TB Seagate Barracuda 7200
Windows 7 Pro 64bit
Cooler Master Silent ProM 850W
I'm using the 290.36 beta driver (the others failed as well).
My motherboard BIOS is the latest version (1408). My GPUs have different BIOS (I bought the first in Feb and the new one today), is that the issue? The problem isn't just in BF 3, I also have it in Skyrim.
Thanks!

Quote from: Keno117 on 12-December-11, 03:15:23
hi svet. yeah, the problem doesn't appear with fraps screen shots.
this mean that issue is caused by your monitor. [or sli brigde issue]
have you tested each vga alone?

Indesign CS6 Problems with OS X Services

With Indesign CS5.5, services work, but not in CS6 on Snow Leopard. What I mean is, if you select some text (in my case Tex text), go to the Indesign menu, select Services, then select something like Typeset LaTex Text, Indesign says the service cannot be used, and the reason revealed in the Console is this:
12/19/12 5:11:41 PM Adobe InDesign CS6[83618] Pasteboard contained types (), but service expects types ("com.adobe.indesign-interchange",
"public.rtf",
"com.apple.traditional-mac-plain-text",
"public.utf8-plain-text")
This error happens for all Services listed.
This works fine in Indesign CS5.5. Googling seems to find nothing about this. Any ideas?
Mac Pro, Mac OS X (10.6.8)

No issues so far on my 2012 Mac Mini but after using this new system for 2 days I find no improvement or features that I would use from ML version. Probably more trouble updating than it was worth.

Cs6 problems with gtx 780 cuda

Similar Messages

Maybe you are looking for