CS6 Process Version

This may be a daft question : In CS6 Bridge it shows an image that has been first time imported and put thru raw and photoshop.
that the process version is 6.7 Should that not read 7.1 images taken on canon EOS 450D
Thanks...

Screen shots are indeed essential.
I suspect you may be looking at a camera profile that was first created when ACR 6.7 was the then-current version. So we need to see what you are looking at and where.
For instance, in the screen shot below, you see Adobe Camera Raw version 7.1 hosted by Photoshop 13 ("CS6") opening an old .PEF file from a Pentax *istD on which, for demonstration purposes, I have selected the very first profile Adobe generated for that particular camera model when the most advanced version of ACR was 2.4. Therefore "Adobe Camera Raw 2.4" in the screen shot does NOT mean that is the version of ACR that is running.
The version running is indeed the very latest, Camera Raw 7.1, as you can see at the top of the ACR preview window, and the process being used in the rendering is 2012:
There is, therefore, a difference between "process named by year" and "Camera Profile named by the version of ACR" under which it was first introduced.

Similar Messages

Is there any way I can download Adobe Photoshop CS6 trial version with my processor?

Hi, I do need to work on something with photoshop. I downloaded Adobe Photoshop CS6 trial version, the installation was fine, but
when I clicked on photoshop icon, a massage comes up, saying "You can't open the application Adobe Photoshop CS6, becase it is not supported on
this type of Mac"
I found information from here: http://www.adobe.com/au/products/photoshop/tech-specs.edu.html
Photoshop CS6 requires multicore intel processor with 64-bit support,
I guess mine isn't enough for this? I am using
Mac OS X 10.6.8
processor 1.83 GHz Intel Core Duo
Memory 2 GB 667 MHZ DDR2 SDRAM
I tried to download another versions but, 10.6.8 only goes with CS6.
So is there any way I can get photoshop in this situation?? I really need to do something by using it!!!!

Not the most helpful error message from the installer? No details on why the system was rejected? That's something I'd consider to be some amateur-level programming in the installer.
You don't have a 64-bit processor. Intel Core series is 32-bit. Intel Core 2 series (and later) is 64-bit.
Depending on what you're looking to do, try Acorn from Flying Meat?

Trial version of Illustrator CC 2014 takes over my CS6 old version and forces me to use CC 2014 on launch. How to fix?

Trial version of Illustrator CC 2014 takes over my CS6 old version and forces me to use CC 2014 on launch. How to fix? FIle> get info>won't let me choose >Open this file with CS6. Forces me to use CC 2014 Illustrator which I don't want because I am doing client work in CS6 that I own and I do not have time to try out the CC version.
I also do not like the black interface in illustrator as I cannot even see the layer icon at the bottom. I won't want to buy it if this is all that's offered.

You can change the UI brightness in the prefs. Otherwise I'm not clear what your issue is. Handling file associations are operating system basics and you can look them up on a simple web search and from drag&drop onto the launchpad/ dock icon for CS6 to opening the files directly from within AI there sure are enough alternatives, don't you think?
Mylenium

Photoshop CS6 Trial Version will not open on my Mac

Photoshop CS6 Trial Version will not open on my MacBook Pro 10.6.8. Message: Photoshop CS6 will not open on this type of Mac. Dreamweaver opened without a problem. When I go into my Adobe Application Manager, it shows Photoshop and Dreamweaver as installed even though I had to unistall Photoshop. I was hoping to try the download again??
Please help.

Creative Suite Cleaner Tool
Run it, try again.
Mylenium

Bonjour, quand j'utilise mon adobe photoshop cs6 extended (Version Adobe Photoshop : 13.0.6 (13.0.6 20131025.r.54 2013/10/25:21:00:00) x64) avec les calques, le clavier de mon Mac Book Pro ( osx 10,9,5 - 2,64 GHZ intel core i7 -8GO 1333 MHTZ ) se bloque

Bonjour, quand j'utilise mon adobe photoshop cs6 extended (Version Adobe Photoshop : 13.0.6 (13.0.6 20131025.r.54 2013/10/25:21:00:00) x64) notamment avec les calques, le clavier de mon Mac Book Pro ( osx 10,9,5 - 2,64 GHZ intel core i7 -8GO 1333 MHTZ ) se bloque. Je suis obligé d'enregistrer ce que je fais dans le texte pré inscrit, puis de rouvrir pour enregistrer dans la rubrique et dans les termes voulu.
Merci de m'indiquer comment résoudre ce problème.

Bonjour! Oui: il faudrait essayer de réinitialiser les préférences, en maintenant CTRL+SHIFT+ALT dès que l'on démarre Photoshop, ce qui supprime le fichier des préférence et le remplace par un nouveau. On doit alors obtenir un message qui demande si on veut recréer les préférences.
La réinstallation ne remplace pas ce fichier, et c'est lui qui peut être corrompu lors d'un arret fatal de la machine.
On peut le remplacer manuellement, en suivant les instructions de ce document remplacer évidemment CS5 par CS6: http://helpx.adobe.com/fr/photoshop/kb/preference-file-functions-names-locations.html
Les pilotes des cartes graphiques datent de Janvier. Y-a-t-il des mises à jour disponibles?
De même, Photoshop n'est pas dans sa version 13.0.1.1 il convient de se rendre dans Aide>Mises à Jour

Can I replace InDesign CS6 with InDesign CS6 ME version?

Can I replace InDesign CS6 with InDesign CS6 ME version? And does the ME version interface in English or Arabic?
I have a translator who sends me InDesign files using the Sultan font, but when I open it, a lot of the font shows up as math symbols. I have the correct font installed, but I'm wondering if I need the additional features of the ME version of InDesign to make the type correct on my end.

I don't believe my CS6 is from a Creative Cloud subscription. It was installed by my IT department, so I will ask them.
When I receive the files from the translator, they send both an InDesign file and a PDF, so I can see it as they see it. However, the InDesign file looks like this:
But the PDF file looks like this:
They sent me the font file, so I'm assuming I have the right font and the issue is on my end. Or perhaps not?

Applying presets causes filter settings to get corrupted if process version updated

I have an ongoing problem with Lightroom 5.7 including earlier versions. The problem occurs when editing photos which use previous process versions (ie, 2010). My presets all have the Current Process version checked (as they should). Whenever I apply any preset to a photo, the settings for existing filters get corrupted (reset to 0). This includes my Graduated Filter settings, Adjustment Brush settings and Radial Filter settings. Those filters and their masks remain on the photo but their parameters have all been set to zero. I keep falling into this trap since it's natural to use my presets when making updates to photos. Often I don't realize this occurred until it's too late.
As a work-around (inconvenient) I can first manually update to the current process by right-clicking the photo and saying Settings/Update to Current Process (2012). Or by clicking the Lightening Bolt button in the upper right corner. But this must be done prior to applying any presets and I typically for get as my database has tens of thousands of pics. Even a preset with just the Process Version set will cause the filter settings to be corrupted. I'm not interested in applying a batch or Quick Develop process to all at once since I need to inspect each one as the process is updated. It would be great if this could be fixed in a maintenance release since it keeps biting me. I think it's important that this be fixed in LR 6.0 also. No doubt it's messed up many user's photos without them realizing it. Does anyone know a work-around so Presets can be used?
System: Win7 pro 64 (current), 4.2 GHz i7, 12GB, Lightroom 5.7.

In my opinion: not a good idea to convert old photos en-batch.
Recommend: convert (hand-selected photos) one at a time, or just use PV2012 on new photos.
There are more than one reason:
* As you know, process conversion yields very different results (if photo has been substantially edited).
* It takes some time to polish your PV2012 editing skills.
* Often when you are comparing PV2012 results to previous PV2010 results (which you've become familiar with, and like...), you may interpret differences in a more negative light, than if you were using PV2012 without comparing to a previous PV2010 version.
This last one can not be over-stated. Numerous times I have converted and been disappointed, at least initially. Recovered highlights can seem like loss of contrast. Detail in shadows can be distracting after initial conversion, until you step back for a while, then re-look at it...
Also, the process version itself (results I mean) takes some getting used to (even when not comparing to a previous legacy-pv edit). e.g. if you've become attached to the over-saturated shadows in previous process version, the shadows seem under-saturated in PV2012, etc...
Rob

Process version 2010 to 2012 update differences...why?

I am a retired computer professional and I have used LR since V3 first came out and have recently updated my photos from process version 2010 to PV2012. I used the batch process as I have ~200 GB of photos. My batch process is as follows:
In the Library module, I clicked on > Library> select Show Photos in Subfolders. I then selected the Develop module, opened a folder and selected the first photo and manually clicked on the ! icon to Update to Current Process (2012). I then added all the photos in the filmstrip to my selection. I then clicked on Sync button to open the Synchronize Settings dialog and clicked on Check None and then check marked only Process Version and clicked on Synchronize.
I noticed that the batch process zeroed out all my settings in the Develop module Basic dialog. I no longer have my previous 2010 settings listed for the photo and in some cases it looks like some of the images have defaulted to an unprocessed state (under or overexposed, lack of color saturation). If I select a photo in the Develop module and go History and select the setting just prior to the "Synchronize Settings" to render it back to PV2010 and click on the image ! icon to update just that one photo, I get a totally different result. I retain the previous settings in the Basic tab and only the new LR4 tool settings are changed.and the History then states "Update to Current Process (2012)".
1. Why the different labeled result in History for the two processes?
2. Why are completely different results achieved in Develop module between the batch vs the manual update processes?
3. Have the photos really been updated from process version 2010 to PV2012 using the batch process listed above? As far as I know, I did the batch process correctly, as I even double checked online prior to processing in batch.
4. Can the images be "batched" back to PV2010? Would they change the photos that have been added since acquiring LR4 that are in PV2012? I can load last weeks backup PV2010 LR4 catalog, but I have added new photos since then and it would be a hassle to process them over again.
I am NOT happy with the results of my process update due to the loss of Develop Module Basic settings and in the completely different results achieved between the batch vs the manual update processes. I would like to keep my old settings that are not impacted by the PV2012 change and now they are gone in my current catalog.
Adobe, is this a BUG or a FEATURE?

In my opinion: not a good idea to convert old photos en-batch.
Recommend: convert (hand-selected photos) one at a time, or just use PV2012 on new photos.
There are more than one reason:
* As you know, process conversion yields very different results (if photo has been substantially edited).
* It takes some time to polish your PV2012 editing skills.
* Often when you are comparing PV2012 results to previous PV2010 results (which you've become familiar with, and like...), you may interpret differences in a more negative light, than if you were using PV2012 without comparing to a previous PV2010 version.
This last one can not be over-stated. Numerous times I have converted and been disappointed, at least initially. Recovered highlights can seem like loss of contrast. Detail in shadows can be distracting after initial conversion, until you step back for a while, then re-look at it...
Also, the process version itself (results I mean) takes some getting used to (even when not comparing to a previous legacy-pv edit). e.g. if you've become attached to the over-saturated shadows in previous process version, the shadows seem under-saturated in PV2012, etc...
Rob

How to get current process version when photos imported?

I have Lightroom 5 but my photos are still imported with the old process version (2010) How can I get the current process version (2012) to be applied automatically on my imported photos?

Hi Andreas,
Did you ever get an answer to your problem?
I am facing the same issue now and i cannot get a lead.
Thanks,
Dimitris

I have PS CS6 (box version for MAC) and it is up to date but keeps crashing??

I have CS6 (box version for a mac) and am a photographer editing large number of files at a time and it keeps crashing on me randomly and I have to start over on my work!! This should not be happening for such expensive software! Please help! My PS is updated to 13.0.6. When I go to the "Purge" menu there is nothing to purge except for video cache. I don't know what else to check.

So what model and year is your machine?
Here are the requirements for ML:
http://www.apple.com/osx/specs/

Process version filter request

I would like to suggest that a filter for process version be added, either in the metadata filter or as an option for creating smart collections

Yes. And now you point that out I see a "Previous Process Version" option under catalog in the left sidebar.

Missing Process Version warning icon in LIghtroom 5

Since converting from LIghtroom 4 to 5 I the Process VErsion warning icon does not appear in the lower right of the preview panel when the file was processed using a 2003 or 2010 version. How can I re-establish the icon? Norm

It changed in LR5 to a "Lightning Bolt" which you'll see under the Histogram in the Develop module.

Adobe Illustrator CS6 Update (version 16.0.4) Installation failed. Error Code: U44M1P7

When trying to update Adobe Illustrator CS6 Update (version 16.0.4) I get this message: Installation failed. Error Code: U44M1P7
I've tried going to the web site and downloading manually but I get the same message.

after by-passing the adobe application manager, this is the next step: http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

Adobe Illustrator CS6 Update (version 16.0.3) Installation failed?

Adobe Illustrator CS6 Update (version 16.0.3)
Installation failed. Error Code: U44M1P7
Photoshop update work fined.
Macintosh running Mountain Lion.

I have the same problem. Dreamweaver's update installed fine though. I don't even know what MacKeeper is.
Photoshop 13.1 for Creative Cloud
Installation failed. Error Code: U44M1P7
Adobe Illustrator CS6 Update (version 16.0.3)
Installation failed. Error Code: U44M1P7
Here's my list of installed applications:
cd /Applications
ls
./                               Dashboard.app/                   Preview.app/
../                              Dictionary.app/                  QuickTime Player.app/
.DS_Store                        Divvy.app/                       QuikIO.app/
.localized                       Dropbox.app/                     Reminders.app/
1Password.app/                   Droplr.app/                      Remote Desktop Connection.app/
Adobe/                           Espresso.app/                    Safari.app/
Adobe Bridge CS6/                Evernote.app/                    Sauce.app/
Adobe Dreamweaver CS6/           FaceTime.app/                    Sip.app/
Adobe Edge Code Preview.app/     Firefox.app/                     Skitch.app/
Adobe Edge Inspect.app/          Flux.app/                        Skype.app/
Adobe Extension Manager CS6/     Font Book.app/                   Spotify.app/
Adobe Illustrator CS6/           Found.app/                       Stickies.app/
Adobe Muse.app/                  FreeMemory Pro.app/              Sublime Text 2.app/
Adobe Photoshop CS6/             Game Center.app/                 SugarSync.app/
Adobe Photoshop Lightroom 4.app/ Geekbench.app/                   Suitcase Fusion 4.app/
Adobe Revel.app/                 GitHub.app/                      SuperDuper!.app/
Alfred.app/                      GitX.app/                        System Preferences.app/
Amazon Cloud Drive.app/          Google Chrome Canary.app/        TextEdit.app/
Android Apps@                    Google Chrome.app/               TextMate.app/
Anvil.app/                       Hammer Trial.app/                Time Machine.app/
App Store.app/                   Image Capture.app/               Tower.app/
AppCleaner.app/                  ImageOptim.app/                  Transmit.app/
Archive Utility.app*             Kindle.app/                      Twitter.app/
Automator.app/                   Last.fm.app/                     Ubuntu One.app/
Backblaze.app/                   Launchpad.app/                   Utilities/
Bartender.app/                   LightTable.app/                  VirtualBox.app/
Brackets Sprint 16.app/          LiveReload.app/                  WebFonts/
Brackets Sprint 17.app/          MacVim.app@                      WebKit.app/
Brightness Slider.app/           Mail.app/                        WebStorm.app/
CCleaner.app/                    Messages.app/                    Wi-Fi Diagnostics.app*
Calculator.app/                  Microsoft Communicator.app/      Windows Phone.app/
Calendar.app/                    Microsoft Messenger.app/         Woven Uploader.app/
Carbon Copy Cloner.app/          Microsoft Office 2011/           Xcode.app/
Charles.app/                     Microsoft Silverlight@           Xcode46-DP1.app/
Chess.app/                       Mission Control.app/             Xcode46-DP2.app/
Chocolat.app/                    Mou.app/                         Xmarks for Safari.app/
Chromium.app/                    MyShoebox.app/                   eclipse/
Coda 2.app/                      NetNewsWire.app/                 iOS Simulator.app@
CodeKit.app/                     Notes.app/                       iPhoto.app/
Colloquy.app/                    Opera Mobile Emulator.app/       iTerm.app/
ColorSchemer Studio 2.app/       Opera Next.app/                  iTunes.app/
ColorSchemer Studio.app/         Opera.app/                       iWork '09/
Contacts.app/                    Photo Booth.app/
DVD Player.app/                  Pocket.app/

Tether & Develop Settings in LR3 always get the 'Update Process Version'

I am using tether with develop settings in LR3. I keep getting the 'Update Process Version' and it won't apply the filter unless I click the (!). It does this with newly created presets. Please help.

awimaging wrote:
bit of a waste of £78!
Erm, 2 words... free trial?
Anyway, let's get you sorted out. Are you the same hania on the POTN forums, or do you just have the same problem?
First things first, when you mention repairing permissions, I guess you're a Mac user.
First, hold down Opt while starting LR and see if you can start a clean catalog ok. That'll determine whether it's catalog specific.
Then go to Macintosh HD / Users / [your username] / Library / Preferences / and move or delete any com.adobe.lightroom*.plist files.
And while you're there, I'd also go to Macintosh HD / Users / [your username] / Library / Application Support / Adobe / Lightroom / and move that Lightroom folder somewhere else for the moment.
Then see if it works. Could be a few things - most likely are a problem with the catalog, corrupted preferences file, or a preset that it doesn't like. We can exclude those quite easily using the above.

CS6 Process Version

Similar Messages

Maybe you are looking for