CS6 Render with Sound Question

Hi Guys,
Is there a way to turn on the render sound option for all comps in a large list of comps in the CS6 Render queue? I know CC fixes this as I am using both versions but I need to use CS6. I tried shift clicking and selecting all comps but the change only effects one comp.
On similiar lines, is there a way to send a large list of comps to the media encoder, I can only get it to ingest one comp at a time through the dialogue box.
Thanks for considering these issues for me.
Mandy

> Is there a way to turn on the render sound option for all comps in a large list of comps in the CS6 Render queue?
Create an output module template with audio output enabled. Apply this template to each item in the render queue.

Similar Messages

My computer suddenly refuse to start. When I turn it on it gives the startup sound but the screen is grey and after a while a little folder icon with a question mark inside turns up. It doesn't blink. What to do? Nothing happens if I try to start up from

As I say my computer, a mac mini refuse to start. When I turn it on it gives the startup sound and the screen turns grey and stay that way for a long time. And in the end a small folder icon with a question mark inside (it doesn't blink) turns up in the middle of the screen.
I have tried to start up from the installation CD holding down the C key on the keyboard. Same result. I have tried different key combinations while starting up. No result or rather same result. Nothing. Is the computer suddenly dead?
I was about to buy a new computer but I need access to my data on this one (I write this on an iPad) but hven't yet found a way.
Anybody have any good advice?
I thought it was a software problem, that the computer couldn't find the startup software or something and maybe it is, but I am beginning to fear that it could be a hardware problem.

You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
https://discussions.apple.com/message/23957654#23957654
Peace
Harry

When I went to turn the desktop on, the start up sound came on. Then the screen was white with an icon flashing. The icon is a file folder with a question mark on it. I cannot get it to fully turn on. HELP

When I went to turn the desktop on, the start up sound came on. Then the screen was white with an icon flashing. The icon is a file folder with a question mark on it. I cannot get it to fully turn on. HELP

Run a disk repair tool on the hard disk or install a new OS.
(59898)

My computer is will not boot up. INstead its making a clicking sound and in the middle of screen picture of a file with a question mark. What does that mean?

Does anyone know what's wrong with it? not booting up. instead of it a picture of a file appears with a question mark on it in the middle of screen?

Sounds like abad hard drive. The clicking sound is coming from the HD. The folder with the question mark means that your computer can't find the statrup disk or the hard drive.
Boot your computer using the install disc and check if Disk Utility can recognize your HD. If not, then it needs HD replacement. If you have AppleCare or within the 1 year warranty, then replacement should be free from Apple. Check the nearest Apple Store in your area.

IMac won't turn on. Only a clicking sound and a grey folder with flashing question mark.

iMac won't turn on. Only a clicking sound and a grey folder with flashing question mark.
Help.

Your iMac is actually turning ON as proven by the grey folder with the flashing question mark.
The flashing question mark indicates that your system is unable to find a bootable volume. The clicking sound that you hear is probably coming from your hard drive while it tries to recalibrate. I suspect your hard drive has failed.
What model imac do you have? If it's under warranty I suggest taking it in for service. Hopefully you've been maintaining a regular backup of your data as all users should. I lost my data once and it was a valuable lesson. I back up regularily now.
If your iMac came with install disks then you can boot from them, choose your language when asked, then pull down the Utilities menu to launch the Disk Utility application. The Disk Utility application will allow you to verify whether your hard drive has an issue. Usually a clicking sound, assuming it's coming from the hard drive, is a sign of a bad hard drive.
If your system has Lion installed then you can hold down the Command and R keys when you restart the system, then launch the Disk Utility application from the menu that appears.

AE (CS6) Render Queue Messes Up Audio

So I decided to render out a file using the AE (CS6) Render Queue. I exported audio with the video, and, well... this is what I got.
http://vimeo.com/49931535 (password is "GG4ever")
The audio slow unsyncs, and then something happens about ten seconds in where it starts playing back audio from earlier in the project. Uhh... what?
BTW, this is how the audio SHOULD sound (this was rendered out with AME).
http://vimeo.com/49931533

No, the culprits were probably some programming team at Adobe (and I just love how Adobe reps never respond to threads about issues, instead leaving unpaid forum members to do their jobs); I used all 48k Stereo .wav files in my project.
Also, anyone asking about the stats of my computer, it's this: http://www.samsung.com/us/computer/laptops/NP-R580-JSB1US The only change I've made to it is I added more RAM.

Is there a way to access more of my codecs to render with in AE 4.1 ?

Hi all,
I'm a new user using an old version of AE 4.1 on Windows 7.
Is there a way to access more of my available codecs to render with in AE 4.1 ?
When I go to export as an AVI file in AE 4.1 I only have the CINEPAK, DV-PAL, DV/DVCPRO-NTSC and DVCPRO-PAL codecs available as choices, and then NONE for uncompressed output.
Yet when I render to AVI in Adobe Premiere I have the CAMSTUDIO LOSSLESS, CINEPAK, HUFFYUV, INTEL IYUV, LAGARITH LOSSLESS, MICROSOFT RLE, MICROSOFT VIDEO 1, MSU SCREEN CAPTURE LOSSLESS, x264VFW-H.264/MPEG-4 AVC and the XVID MPEG-4 codecs all available to render with. I usually use the XVID MPEG-4 codec to render with for best quality for file size, or the LAGARITH LOSSLESS codec to render with if I need to plug a file back in to Premiere since Premiere has limited AVI file codec import capabilities.
Why aren't the rest of my codecs available to render with in AE 4.1 ?
The problems are (as seen in the screenshots below)...
1) The CINEPAK codec renders the correct file format size and aspect-ratio that my project is (1280x720) but outputs an AVI file that can not be imported in to Premiere and can not be converted by two different converters.
2) The NONE-UNCOMPRESSED option renders the correct size format file but outputs an AVI file so large (over 6 gigs) that it can not be use practically in Premiere and it will not even play in a video player.
3) The DV-PAL, DV/DVCPRO-NTSC and DVCPRO-PAL codecs render in incorrect aspect ratio and format sizes (770x576) regardless of which aspect ratio is selected (as seen at the bottom of the screenshot below), resizing my project size and they will not import in to Premiere... these can be converted to an H.264 AVI file in one of my converters that Premeire will then import, but they are still the wrong size and they loose sharpness if they are resized (stretched) during conversion.
Please see the screenshots below for clarification.
Thanks for any input,
digi

Wow, thanks again Andrew. That works.
All my codecs showing up via Composition/Make Movie. Its weird, when I tried using the H.264 codec (Premiere likes H.264 and Lagarith Lossless), the H.264 rendered a strange 800 and something by 720 size instead of the selected and displayed 1280x720 format that the project is in and speced in the Render interface.
But when I used the Lagarith Lossless codec, I get the right size and everything looks good at 1280x720.
Before you wrote back, I was able to convert one of the 770x576 size DV-PAL files to H.264 via the Freemake converter, and then that imported in to my Premiere file... but that is a moot point now that I can get the correct size file with the Lagarith codec.
I would have been able to use the converted 770x576 (properties says 720x576, but it measures out at 770x576) DV-PAL files for this project with the digital clock and get it to import in to Premiere correctly... since I could just place the clock face when blackscreened in my 1280x720 Premiere project, but now I can use the full size Lagarith rendered file for this and other projects from AE that require the full frame of composition.
Thanks so much... your the most efficient forum guy I've ever had answer a question... no restating or misunderstanding... just pure useful answers.
Thanks a trillion,
digi

I keep getting the little blue box with the question mark

Hi
I have 10.6.7 system software and my safari is 5.0.4
I have called apple twice with this problem already but nothing has helped except for short times.
I have reset safari about one dozen times and when I do I reset the top 7 items and I've emptied the cache in addition just in case. I've also taken my safari preference plist out of my library and trashed it.
And I've run disk utilities many times and restarted my computer. Each thing I do will solve the problem for a short time, even up to a day or more (or less) but then it comes back. For instance on Facebook maybe 1/8th of the thumbnail images have the little blue boxes with the question marks but most don't. I can't figure it out. Sometimes even the iPAD safari gets them too but my firefox doesn't show them and neither does Safari on my eMac.
Yesterday the question marks even showed up in ONE mailing on all 3 computers with the question marks in the blue boxes (meaning my iMac, my eMac and my iPad) but then it just all resolved after a few hours. This does sound like possibly a server problem except today it's happening (in Safari again) only on this iMac in Safari (not firefox) and not on the other two devices.
One more thing, since they changed my radio on the roof for my wireless internet, the 5.8 phone cuts out the internet when I use it. The problem has gotten worse since they changed the radio to the same frequency as the phone, it's a much faster service than the 2.4 radio. I don't know if this is related or not.
Thank you,
Martha

<Contact your ISP.
Is it possible, Carolyn, that this would mainly and almost always be only affecting the iMac and Safari in the iMac if it were a server issue? Right now Safari has more blue boxes with question marks than ever and the eMac and iPad have none. Firefox on the iMac has none also.
I should try a direct connection and by pass the router and see if that makes a difference.
I will contact them tomorrow but I want to get clear in my head first all the facts and possibilities.
Thanks!
Martha

HT4718 I have nothing on my Mcintosh HD after trying to install Mavericks. I did save a recovery copy of files however this was also lost. All I now have is a file with a question mark with nothing else happening. What should I do?

Apple recently sent a message asking me if I would like to upgrade to Mavericks which was free. I considered installing after saving a copy of my HD to a WD external drive. I proceeded with the instalation however when it was time to reboot the programme the computer displayed a message that it could not process the request due to errors with the hard drive. The computer then requested that i save a copy and the verify disk and repair disk which i followed and the computer would not repair due to an error. At which pioint I did some research and was told by the IMac to push shift when it starts to enter disk utility and repair the Mcintosh HD. I did as asked however the computer would still not install with Mavericks.
So after many attempts of trying to start over, I was prompted to erase the Mcintosh HD and reboot using the saved copy. At this point all data was lost and all that is left on my computer is a file with a question mark with no way of restoring the HD drive. Could anyone help please?

It sounds like your HD may have died.
If you could answer a few questions it may help figure out what you should do next:
What OS did you have on your computer before you tried to upgrade to mavericks?
Did your computer originally come with installer disks?

What does the icon of a folder with a question mark inside mean?

After an overnight power outage I tried to turn on my iMac this morning, but all I got was clicking sounds and a gray full screen with the icon of a folder with a question mark inside it, blinking. (There's no tool bar that appears anywhere). What does that mean?
I've tried unplugging the system and waiting a while before attempting another boot. Same screen.
I recently (a month ago) upgraded to Snow Leopard from my original OS X software. Never had this sort of a problem before.The iMac was purchased around 2005 or 2006. Intel Dual Core processor.
Thanks for any help on this.

Thanks, Paul, for the prompt reply.Obviously, your answer isn't what I wanted to hear, but feared. When I get home tonight I'll try finding the install disk and booting from that. Fortunately, I still have a MacBook Pro that is running fine. Incidentally, I have a Western Digital external Hard Drive that has very little, if anything on it. But since I can't open anything on the iMac, I guess I'll have to see if the install disk works before I try to figure out IF I can use that WD-External drive temporarily rather than replace the HD on the iMac. Any clues on what a replacement drive and labor runs for that sort of iMac repair?
j

Templates with sound? Resolution with 1440x1080?

SOS. Two problems:
1. I'm trying to save a Motion template with sound. The Motion Untitled document plays OK with sound, but when I save it as a template.... no sound. What am I doing wrong? (The sound is part of an imported QT movie)
2. My client says he is capturing video at 1440x1080i60 29.97 fps. He wants a template at that resolution. When I create a template at that resolution, and open in FCP in a sequence at that resolution, the Motion template is squashed in the vertical direction. I've tried square pixels and 0.9 pixels, to no avail. I can create a template at 720x480 DV no problem.
Any advice gratefully received!!
regards, david

#1. Correct. You'll need to sync the sound with the template in FCP. Sorry!
#2. In your Final Cut Pro sequence- is Anamorphic Selected? In my quick test, it comes across fine, but gets skewed if Anamorphic is selected. Select the sequence in question, and hit Apple-0.

Hello, mac mini will not boot. I get a file symbol with a question mark, then a white screen, Hello, mac mini will not boot. I get a file symbol with a question mark, then a white screen

Hello, My mac mini will not boot. When I turn it on, I get the chime, then the white screen, then the apple symbol, then a file symbol with a question mark, then the white screen and then it stays like that.
Is this a bad hard drive?

Sounds like it. Try booting from your OSX restore DVDs - startup and hold down "C". This will take AGES! Then run Disk Utility from the menu.
The flashing ? means your system is corrupt, dead, not there, on a dying HD, etc...

Connected Digital AV Adapter to HDMI HD TV. Photo slideshow works fine but cannot play iTunes playlist concurrently (with sound turned off on slideshow)

Connected Digital AV Adapter from my iPad (64 GB 4G) to my HD TV. Tried playing slideshow (with sound off) concurrently with playing iTunes playlist. Video plays fine but no audio. iTunes volume indicator not showing any volume.

Just following-up on this posting from a week or two ago and another a few days later about the problems with catch-up TV. We were disappointed with the lack of service, but as we can get most of the catch-up we want on the Sony Bravia TV, hadn't pursued it with BT perhaps hoping things would improve.
Got a phone call last week from BT asking if we'd been able to set up the YouView Box OK, which we had. Mentioned the unsatisfactory service. She immediately put me through to the BT technical call centre in India where I spoke to guy called Rajiv or something like that. Asked a few questions and then asked me to switch off the YouView Box (back panel switch) and do a hard-reset on the Homehub Router. Once this had been done, and the YouView box switched back on. The service ran fine and has done so since. I don't know if Rajiv did anything in the network or whether this is just some problem (he called it a "glitch") in the router/YouView box. Funny that that the speedtest and streaming to the Sony TV works OK.
He phoned back a couple of days later to see if we'd had any further problems. Overall good service. It would be interesting to know from a technical point of view what the problem was and how it was solved. It shouldn't be necessary to reset boxes in this way.

Getting started with Sound

Hello everybody,
I am new to working with sound on JAVA, though I am not new to Java programming in general.
I am having trouble finding a place to start with a (I think...) simple problem:
I want to implement the following functionality:
1) Load an audio file from disc in one of the three formats *.wav, *.aiff or *.mp3
2) Specify a start and end time (preferrably in milliseconds) and play the corresponding part of the sound file
My hope is that there is a ready-to-use class for this in Java 1.4., but I can't seem to find it. javax.sound.sampled.Clip seems to provide some of the things I am looking for, but it is an INTERFACE. Is there a class which IMPLEMENTS it?
Thanks for your help.
Thomas

Hi new Java developper in sound :),
Just to help you to begin, you have two different thing to work with sound on java.
- Javasound (javax.sound) include in the JDK1.4
- JMF (javax.media) download on the JMF home page
If you wanna do something very simple you can use the Javasound API. It'very easy to use and you can access easily to the data.
If you wanna support different format or implement effect or do something more powerful, you will need to use JMF (in fact this forum is here for that). I pretty sure that Javasound don't support mp3, so will need to use JMF.
Just for you to know, JMF use Javasound to render some sound format, so you can consider JMF like an new layer after Javasound. For the sun-ibm implementation.
I post already some code who do the job you need (I guess). It's was for video but it work also for sound.
http://forum.java.sun.com/thread.jsp?forum=28&thread=313688
good luck

Laptop turns on but has a folder with a question mark in the middle

for the last month or so my computer has been acting weird. when i turnd it on one morning it wouldent load it just kept the apple sign logo on the screen then it would change too the circle with a line though it sign.
now the logo doesnt even show up and a folder with a question mark on it is shown. is there a way to fix this problum and if so estimated how much...

Hi wizy;
It sounds like either your disk or the directories on your disk have been slowly going bad.
Do you have a backup?
The question mark indicates that your Mac is not able to find a system to boot from. I would suggest that you boot form the install media for your Mac and repair the disk with Disk Utility. Let us know the results of that and we can go from there.
Allan

CS6 Render with Sound Question

Similar Messages

Maybe you are looking for