CS6 Service Manager...can I uncheck in msconfig?

Do i need the CS6 Service Manager in my start up (of msconfig) to load every time my computer turns on? I only use Fireworks as needed, and would prefer not loading lots of extra programs...Can I uncheck this?

You can uncheck it. I've never had an issue and I run with it removed via soluto (Really just a 3rd party interface to MS config.)

Similar Messages

CS6 Service Manager?

I recently downloaded CS6 Photoshop, successfully, supposedly. When I try to load the program I get 32 instances of "dynamic link manager has stopped working". The program loads and appears to work (it loads files) but I haven't done anything with it because I am constantly interupted with a CS6 Service Manager. exe msg; "Application has failed to start because MSVPC100.Dll was not found. Re installing the application may fix the problem." I am not sure which program this is refering to. I went to the control panel but found no program resembling CS6 Service Manager to unisntall. Should I unistall photoshop and reinstall it
? I also can't find much about what MSVPC100.Dll does. Is this some sort of cloud related thing that the Service Manager is constantly monitoring the program? My old CS4 still works fine. Installed Premier Pro on my computer and got the same problem Any suggestions on how I can make CS6 useable? Thanx

I reinstalled photoshop and still have the same problem though Photoshop will now load with out the 32 dynamic link manager has stopped working msgs, when I try to use the program I am interrupted every 15 seconds with a msg that CS6 service manager has stopped working - unable to locate component MSVPC100.Dll.
I did do a quick search of my computer and it did not find MSVPC100.Dll either. Is there away to get it onto my computer so that the service manager can find it.? (I assume there is no way to get the service manager to stop looking for it)
All suggestions welcome.
Thanks in advance.

CS6 Service Manager / Vulcan Control.dll Missing / App Crashing on Startup

I am using Windows 7 on a CC Team Member, not the first time i have had this issue where App's whould not update but got it fixed. This time however it wont fix and i no have a CS6 Service Manager Error & VulcanControl.dll missing error.
I am not using CS6 all my products are CC App's.
Would love some help as I am a team member online support is not allowed and when i tried calling i was on hold for 45min then I had to let someone else use the phone in office.
At the moment I dont have any CC or CS6 products installed, I have also used Adobe Creative Suite Cleaner.
Please can someone help.
Thanks

There seems to be a real issue here . I get this problem. CC2014 runs for a short time after I reinstall a back up operating system then up it comes again Vulcancotrol.dll missing program can not start.
I can find no solution. Any attempts to fix or reinstall get blocked by Norton. Even if I turn of my anti virus I can not get this .dll back.
What is going on?
Need help please. I reinstalled a working system this morning but the same problem has now come up again. Attempts to re register Vulcancontrol result in a message that is is not present!

CS6 Service Manager has stopped working?

Installed trial version and it seems to download but then when I try to use the program a pop up box that says Adobe CS6 Service Manager has stopped working keeps popping up. How to fix?

Which Adobe software in specific is giving you this error message? Which operating system are you using? Did you receive any error messages during the installation process?

CS6 Service Manager Error 0xc000007b

Have had the problem 0xc000007b caused by ilivid with LR4, easily fixed something I have to do each time there is a software update. My most recent software update of Photoshop is causing a new error message. CS6ServiceManager.exe - Application Error unable to start correctly (0xc000007b). Any ideas as to how to solve this problem? Can't run Photoshop!!!!!!!!!

0xc000007b Problem http://forums.adobe.com/thread/1099431 from another forum... might help

Service Manager Authoring Tool 2012 SP1 Missing DLL's

Hello All,
Originally posed this to the MS partner forums and was asked to post here.
I'm hoping someone familiar with the Authoring Tool For service Manager can help me. I'm using the Service Manager Authoring Tool 2012 SP1 found at the link below. I believe this to be the latest available.
Although the splash screen says Service Pack 1 Beta? Hoping the dev forgot to update the splash screen.
http://www.microsoft.com/en-us/download/details.aspx?id=36214
I'm trying to create a new custom Service Request form and am getting prompted for some DLL's that seem to be workstation related or at least the Aerolite.dll makes me thing Windows Aero. (Could be wrong)
I've successful created a new Management pack, and I created a new Class that inherits the properties of the Service Request Class. I've added all the properties I need for the new form. All is well no issues there.
The next step is to create a new custom form. I select the create new custom form. Give it a simple name, and select my assembly then the form type. I'm then prompted for several DLL files that are not on my system
and I'm not sure where to find them.
The DLL's are:
Microsoft.EnterpriseManagement.UI.ExtendedControls.Aerolite.dll
WPFTToolkit.AeroLite.dll
I can select cancel several times to get ride of the prompt for the DLL's and can customize the from without issues. I don't think this is correct but I have been able to create the form.
Does anyone know where I can find the above DLLs? Am I doing something incorrect here? Is this a bug in the authoring tool? If so is there an updated version I should be using?
I also receive the same prompt for DLLs when attempting to create a custom incident form....
My test environment is running Server 2012 R2 with Service Manager 2012 SP1. Went ahead and tried this using the Service Manager 2012 SP1 Eval VHD and had the same issue...

Hello Gabe,
The following post provides some insight on the Aero DLL's.
Hi Matt,
The Aero dll is only available on Vista so the tool will not find it when running on a different OS (e.g. Server 2008). However, you can safely cancel out of that it does not affect the form.
Regarding moving controls between tabs, unfortunately that's not supported this release.
It sounds like you did everything right, so let us try your MP here and see if we can reproduce the crash you are seeing and investigate it.
Thanks,
Cori
Another post regarding 'Beta' on the splash screen.
Yes, someone forget to change the splash screen :)
Rob Ford scsmnz.net
Cireson www.cireson.com
For a free SCSM 2012 Notify Analyst app click here
Can't post links to the full posts as this is a new account but I am sure you can find the referenced articles here on TechNet with the help of Bing or Google.
Hope this helps.
~Nick

Service Manager problem - ASAP

Hi,
In our server i am not able to see the services in service manager. can anyone tell me how to resolve it.
This is very important since i m not able to get the hardware key for server.
swapnil

Sapnil,
Assuming you get the ServerTools running on another machine and the entire SAP Business One system runs smoothly. Then you should have a deeper look on the Server to get the ServiceTools installed there.
- As soon you get it running there, you will be able to get the hardwarekey. (Actually, SAP Business One License service uses exactly the same hardwarekey, which Microsft uses in order to activate Windows Operating System.)
- Then change maintain this installation on our Marketplace and change the hardwarekey for this installation. If there should be a problem, refer to Notes [781853|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMSZ3PTU4ODAwMDAr)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=781853] and [776869|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMSZ3PTU4ODAwMDAr)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=776869].
- Request a new licensefile. Be patient, it might take some time until all settings were replicated.
- Import it on the just installed licence manager on the Server.
- Now you have 2 possibilities:
Enter the new licenseserver via SAP Business One ->Administration -> License ->License Administration.
OR:
Stop the license service on the machine you used temporally for the ServiceTools. Afterwards open Business One. Since the Licenseserver cannot be found anymore, you will be asked to enter name or IP adress of another licenseserver. Enter the name or IP adress of the Server.
- Deinstall the temporally installed licensesserver as soon you have verified everything runs smoothly again.
Kind regards
Mario

IT Service Management

Hello Experts,
I'm new to Service Module and started working on Demo for IT service Management,Can any one please let me know about IT service Management settings so that I can start from there?
Especially : the below functionality
Incident management
Request for change
Workflow
Solman integration
Thanks in advance,
Regards
Vinod

Hi Vinodh,
IT Service Management is one of the new scenario which has been introduced in CRM7.0. This scenario helps IT help desk to work smoothly. You can find more information about the scenario and configuration in the following link:
http://help.sap.com/saphelp_crm70/helpdata/EN/de/7397235e2047c6bea2f16474d59d51/frameset.htm
You can find more info in the following thread:
Re: CRM7.0 IT Service Management
Hope this helps!
Regards,
Chethan
Edited by: Chethan Kumar C M on Sep 16, 2009 1:39 PM

ITunes won't recognize my iPod. I have the Apple Mobile Device USB driver installed in my programs but it doesn't show up in my Device Manager or Services. Can someone help?

So I connected my iPod to iTunes and an error message came up saying it needed an updated version of iTunes 64 bit and I was missing the Apple Mobile Device USB driver so I downloaded it because another discussion said that was the solution. I did but it wont show up in my device manager or services. Can someone help me figure out whats wrong?

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Enterprise Manager can't show web-service in the web-services area

I'm deploying my application(stateless web-service) it work's well, but Enterprise Manager show that it's not a web-service, it can't show application in the web-services area, this fuсking server have many-many-many bugs and errors (fuсking developers was drunken a lot, imho), documentation's have many errors too, and I hate this server, but I need to use it on my work :-(
p.s. read documentation's carefully it have many errors.
p.p.s. From Russia with LOVE! Russian developers are the best from the best!

Hello,
Could you be more specific about the version of OracleAS you are using?
- which exact version ? (10.1.3.x, 10.1.2.x or 9.0/x)
- which kind of Web Service are you developing? (J2EE 1.4/JAX-RPC or earlier version)
Also if you find bug in the documentation or product please send let the Oracle Support Service knows.
Regards
Tugdual Grall

Service manager console can't connect to Service manager data warehouse SQL reporting services

When I start Service manager console, it gives this kind of error:
The Service Manager data warehouse SQL Reporting Services server is currently unavailable. You will be unable to execute reports until this server is available. Please contact your system administrator. After the server becomes available please close your
console and re-open to view reports.
Also in EventViewer says:
cannot connect to SQL Reporting Services Server. Message= An unexpected error occured while connecting to SQL Reporting Services server: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.EnterpriseManagement.Reporting.ReportingService.ReportingService2005.FindItems(String Folder, BooleanOperatorEnum BooleanOperator, SearchCondition[] Conditions)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String searchPath, IList`1 criteria, Boolean And)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItems(String itemPath)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.FindItem(String itemPath, ItemTypeEnum[] desiredTypes)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReporting.GetFolder(String path)
at Microsoft.EnterpriseManagement.Reporting.EnterpriseReportingGroup.Initialize()
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath, NetworkCredential credentials)
at Microsoft.EnterpriseManagement.Reporting.ServiceManagerReportingGroup..ctor(DataWarehouseManagementGroup managementGroup, String reportingServerURL, String reportsFolderPath)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.ManagementGroupServerSession.TryConnectToReportingManagementGroup() Remediation = Please contact your Administrator.
We have a four server set-up where SCSM, SCDW, and sqls for both are on different servers. Also I have red that this could be a SPN problem, but this has been worked on last week without the SPNs.

On the computer you get the "SQL Reporting Services server is currently unavailable" message please open the Internet Explorer and try to connect to the URL <a href="http:///reports">http://<NameOfReportingServer>/reports
This should open the reporting website in IE. If this isn't working you should check the proxy settings in IE. If the URL doesn't work in IE it won't work in the SCSM console as well (and vice versa).
Andreas Baumgarten | H&D International Group
Actually I can't access to the reporting website. It asks me credentials 3 times and then return a blank page. Also error message comes to the EventViewer System log with id 4 and source Security-Kerberos.
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server "accountname".
The target name used was HTTP/"reporting services fqn". This indicates that the target server failed to decrypt the ticket provided by the client.
This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using.
Ensure that the target SPN is only registered on the account used by the server.
This error can also happen if the target service account password is different than what is configured on the Kerberos Key Distribution Center for that target service.
Ensure that the service on the server and the KDC are both configured to use the same password.
If the server name is not fully qualified, and the target domain (domain.com) is different from the client domain (domain.com), check if there are identically named server accounts in these two domains,
or use the fully-qualified name to identify the server.
I can access the website directly from the server which hosts Reporting Services.
Also I query "setspn -Q HTTP/"reporting services fqn" whit result NO SUCH SPN FOUND.

I can't see the Reporting Workspace in Service Manager Console PLEASE HELP

I can't see the Reporting Workspace in Service Manager Console PLEASE HELP

Hello,
If you don't have an entry like "SQL Server Reporting Services (InstanceName)" in Windows Service Manager (Services.msc) then because SSRS service not installed on that machine. Install it, then you will see such an entry.
Olaf Helper
This is not an SQL issue it's a SC Service Manager issue. Reporting Services is installed and running on the SQL side. The problem is that as I am now aware I cannot get the Data Warehouse Server to register in the Service Manager consoles to connect that
with the canned reports and turn on Reporting Workspace. Any thoughts?
[ Blog] [ Xing] [ MVP]

Can't connect to Configuration Manager Service manager

So after a failed upgrade to R2, I've had to restore the database as the R2 upgrade corrupted the DB.
I am now working though the minefield of component errors. However I can't connect to the configuration manager service manager, I get this error:
Error communicating with the specified Configuration Manager Site Server
So I have done a site reset and I still have the same issue.
I have tried several accounts, all with full permissions on the site server and in configuration manager. I'm stumped now.
Anyone experienced this before and found a solution?

Hi,
Any useful information in your ConfigMgrSetup.log and windows event log?
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

In Microsoft Service Manager how can I Identify that one Change Request is backed out or not.

In Microsoft Service Manager how can I Identify that one Change Request is backed out or not.

Hi,
It seems that he means "Not Approved"
Cheers,
Marat
Site: www.scutils.com Twitter: LinkedIn:
Graveyard:

How can I retrieve/compute an X509 certificate's thumbprint in Python and then use it for accessing Service Management APIs from Python SDK?

Hello,
I am using Azure Python SDK to perform calls to ServiceManagement APIs.
I have a .publishsettings file generated for my account which includes an encoded version of my X509 certificate and all of my subscription IDs.
How can I retrieve/compute an X509 certificate's thumbprint in Python?
Following is the code snippet that helps us do it in .Net.
Is there a similar approach to do it in Python?
var publishSettingsFile = @"C:\temp\CORP DPE Account-11-16-2011-credentials.publishsettings";
XDocument xdoc = XDocument.Load(publishSettingsFile);
var managementCertbase64string = xdoc.Descendants("PublishProfile").Single().Attribute("ManagementCertificate").Value;
var importedCert = new X509Certificate2(Convert.FromBase64String(managementCertbase64string));
thumbprint = importedCert.Thumbprint;
Once I have the thumbprint, how can I use that thumbprint to access Service Management APIs from Python SDK?
Thank you in Advance!
Regards,
Vaibhav Kale

Hi,
Please have check on the below article and check if it helps.
http://azure.microsoft.com/en-in/documentation/articles/cloud-services-python-how-to-use-service-management/
Regards,
Mekh.

CS6 Service Manager...can I uncheck in msconfig?

Similar Messages

Maybe you are looking for