CS6 Service Manager Error 0xc000007b

Have had the problem 0xc000007b caused by ilivid with LR4, easily fixed something I have to do each time there is a software update. My most recent software update of Photoshop is causing a new error message. CS6ServiceManager.exe - Application Error unable to start correctly (0xc000007b). Any ideas as to how to solve this problem? Can't run Photoshop!!!!!!!!!

0xc000007b Problem http://forums.adobe.com/thread/1099431 from another forum... might help

Similar Messages

CS6 Service Manager / Vulcan Control.dll Missing / App Crashing on Startup

I am using Windows 7 on a CC Team Member, not the first time i have had this issue where App's whould not update but got it fixed. This time however it wont fix and i no have a CS6 Service Manager Error & VulcanControl.dll missing error.
I am not using CS6 all my products are CC App's.
Would love some help as I am a team member online support is not allowed and when i tried calling i was on hold for 45min then I had to let someone else use the phone in office.
At the moment I dont have any CC or CS6 products installed, I have also used Adobe Creative Suite Cleaner.
Please can someone help.
Thanks

There seems to be a real issue here . I get this problem. CC2014 runs for a short time after I reinstall a back up operating system then up it comes again Vulcancotrol.dll missing program can not start.
I can find no solution. Any attempts to fix or reinstall get blocked by Norton. Even if I turn of my anti virus I can not get this .dll back.
What is going on?
Need help please. I reinstalled a working system this morning but the same problem has now come up again. Attempts to re register Vulcancontrol result in a message that is is not present!

CS6 Service Manager has stopped working?

Installed trial version and it seems to download but then when I try to use the program a pop up box that says Adobe CS6 Service Manager has stopped working keeps popping up. How to fix?

Which Adobe software in specific is giving you this error message? Which operating system are you using? Did you receive any error messages during the installation process?

CS5 Service Manager error message?

I keep getting the CS5 service manager error message - ordinal not found. Specifically ' the ordinal 3873 could not be located in the dynamic link library LIBEAY32.dll' Any ideas please on how to fix this?

That's very puzzling, but you seem to have an older version of the Adobe Extension Manager for CS5.x. You are on 5.0.x, R_Kelly mentions 5.2.x, and I'm on 5.5.x
Maybe you need to make sure you are updated to Photoshop 12.1 update first, then make sure you are updated to Adobe Extenson Manager 5.5.0.163.
This is the version of the AEM that I have for Photoshop 12.1 (CS5.1) which resides on my Snow Leopard 10.6.8 boot HD:
And this is the version of the AEM that I have for Photoshop 12.1 (CS6) which resides on my Lion 10.7.5 boot HD:
This is the Photoshop 12.1 (CS5.1) application info:

CS6 Service Manager?

I recently downloaded CS6 Photoshop, successfully, supposedly. When I try to load the program I get 32 instances of "dynamic link manager has stopped working". The program loads and appears to work (it loads files) but I haven't done anything with it because I am constantly interupted with a CS6 Service Manager. exe msg; "Application has failed to start because MSVPC100.Dll was not found. Re installing the application may fix the problem." I am not sure which program this is refering to. I went to the control panel but found no program resembling CS6 Service Manager to unisntall. Should I unistall photoshop and reinstall it
? I also can't find much about what MSVPC100.Dll does. Is this some sort of cloud related thing that the Service Manager is constantly monitoring the program? My old CS4 still works fine. Installed Premier Pro on my computer and got the same problem Any suggestions on how I can make CS6 useable? Thanx

I reinstalled photoshop and still have the same problem though Photoshop will now load with out the 32 dynamic link manager has stopped working msgs, when I try to use the program I am interrupted every 15 seconds with a msg that CS6 service manager has stopped working - unable to locate component MSVPC100.Dll.
I did do a quick search of my computer and it did not find MSVPC100.Dll either. Is there away to get it onto my computer so that the service manager can find it.? (I assume there is no way to get the service manager to stop looking for it)
All suggestions welcome.
Thanks in advance.

NIMCInit.dll NI-PAL Service Manager Error

Hello all,
I'm getting the attached NI-PAL Service Manager error every time I start my computer. I've tried solution given in this post: http://forums.ni.com/ni/board/message?board.id=240&message.id=4362 thread with no luck.
If I uninstall the NI-Motion drivers, or remove my PXI-7350 from the PXI chassis, the error goes away. After I re-install the NI-Motion drivers and re-start the computer, the problem occurs as soon as the "Found New Hardware" wizard completes, and on every boot thereafter.
Any pointers to what I should try next would be helpful.
OS & Driver Versions:
Windows XP SP2 Version 2002
NI Measurement & Automation Explorer 4.4
NI Motion Assistant 2.2
NI-488.2 2.5
NI-CAN 2.5.2
NI-DAQmx 8.7
NI-FGEN 2.5.1
NI-Motion 7.6
NI-VISA 4.2
Hardware:
PXI-1042 Chassis
PXI-8187 Controller
PXI-7350 (Slot 2)
PXI-2566 (Slot 3)
PXI-8464 (Slot 4)
PXI-6254 (Slot 5)
PXI-6602 (Slot 7)
PXI-5402 (Slot 8)
Attachments:
NI-PAL Error2.png ‏19 KB

Hi Mark,
Make sure that when you uninstall everything you also
1. Uninstall MAX
2. Delete the MAX data folder (this doesn't uninstall when you uninstall).
On Windows XP and Windows 2000:
Navigate to C:\Documents and Settings\All Users\Application Data\National Instruments\MAX\Data\
The folder named Application Data is a hidden folder. You can view hidden folders by selecing Tools » Folder Options..., click the View tab, and selecting Show hidden files and folders.
Note: Remember that deleting the Data folder in its entirety
will remove all configuration settings. The next time MAX is launched,
you will have to configure all of your hardware again.
Thanks,

CS6 Service Manager...can I uncheck in msconfig?

Do i need the CS6 Service Manager in my start up (of msconfig) to load every time my computer turns on? I only use Fireworks as needed, and would prefer not loading lots of extra programs...Can I uncheck this?

You can uncheck it. I've never had an issue and I run with it removed via soluto (Really just a 3rd party interface to MS config.)

Uccx Critical Cisco Service Manager Error

Hi
I have a issue. The UCCX trigger suddenly did not work, and I had to restar the engine service. The log service down at 12:57. The log indicate Critical, Cisco Service Manager message.
The UCCX version is 8.5.1.10000-37
TIA
Cristian.

Hi Cristian,
This is the event viewer logs which show the message for all the services. Even the Service restart will be logged and this log is not a true indicator of a service failure.
The points to note next time is:
1. What is the status of the CTI RP on the CUCM when it fails?
2. What is the status of the CTI Ports when the call fails?
3. Are the internal calls to the RP working fine?
4. Collect the MIVR and JTAPI logs from UCCX and CTI manager logs from CUCM and analyze for the failure.
The above should help you in finding the root cause.
Regards,
Arundeep

Service Manager "Error communicating with component" after moving SQL servers

We just moved our SCCM database to a new SQL server and ever since, I've been getting stumped as to why I'm getting the following error each time I try to query the status of anything under the SQL server:
Error communicating with component
Admittedly, I'm a total novice when it comes to SCCM and I was doing this under the loose supervision of my predecessor (this is his last week). I appreciate anyone offering any advice as to where I should start, and I apologize I'm not knowledgeable
enough yet to know exactly what info to provide you with initially!
Thanks!

Thanks for the quick replies!
@Peter: Currently using SCCM 2012 R2 running on a 2008 server, with the database having moved from SQL 2010 to 2012. We have a single primary site with 5 additional distribution points supporting around 260 users.
We did only change our SQL server and the guide you posted is the exact one we used. Everything seemed to look exactly like the guide. Afterwards, when checking the Configuration Manager Server Manager, under Servers, it had my SCCM server and
new SQL server both listed. The components listed under my SQL server were as follows:
SMS_COMPONENT_MONITOR
SMS_EXECUTIVE
SMS_MP_FILE_DISPATCH_MANAGER
SMS_OUTBOX_MONITOR
SMS_SITE_SQL_BACKUP_SCCM01
SMS-SRS_REPORTING_POINT
However, when we query those components, we get "Error communicating with component" on all of them except SMS_SITE_SQL_BACKUP_SCCM01. I'm slightly suspicious of our certificates but I'm not well-versed enough with them to troubleshoot effectively
on my own.

NI-PAL Service Manager Error Message

Hello Fellow LabVIEW users
I am getting error message everytime I switch on my computer as shown in the attached image file.
1) what is the NI-PAL? I could not find any help topics related to it.
2) Why is this error message shown? Could it be because I changed the PCI port for my GPIB card?
3) How do I overcome this issue? Is it a major problem?
Thanks
mhaque
Attachments:
error message.JPG ‏44 KB

Mhaque,
May be the following link help for u..
http://forums.ni.com/t5/LabVIEW/NI-PAL-service-manager-generate-an-error-at-the-startup-of-the/td-p/...
Siva
Sivaraj M.S
CLD

Adobe Media Encoder cs6 error 0xc000007b

Recently i installed Adobe Media Encoder CS6 , on start it showing application unable to start due this error 0xc000007b, please resolve ASAP, if anybody knows.

I just want to make sure anyone with the same problem who comes across this thread is made aware of some things to try and at least one solution that has worked for multiple people...
As the Adobe Staff member here mentioned, the 0xc000007b error usually has to do with a 32-bit/64-bit confusion on the machine. More specifically, as someone stated in a Windows forum: "this error is most likely a result of a 32-bit (x86) executable trying to load a 64-bit (x64) DLL."
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/error-the-applicati on-was-unable-to-start/05a2b904-3f61-4d08-94d6-e2ff92161111
What has worked for others is copy & pasting the msvcr100.dll & msvcr80.dll files from the After Effects Support Files folder to the folder of the app that is giving this error (usually Media Encoder or Premiere Pro or Lightroom). It was mentioned several times in the threads below, and worked for me as well...
http://forums.adobe.com/message/5020877#5020877
http://forums.adobe.com/message/4861711#4861711

How do you resolve Financial Management service validation error in EPM ?

Does anyone know how to resolve Financial Management service validation error from EPM Diagnostic Report?
Environment:
Quad-Core AMD Processor 2.2 GHz (Server Machine)
5 GB RAM
Server 2003 Standard 32-Bit SP2 (also tried in Enterprise)
Application Server:
WebLogic Server 9.2 Custom Installation (with Add-Ins)
http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
Database:
Oracle 10gR2 (Standard Installation per step-by-step guide from Oracle)
http://www.oracle.com/technology/software/products/database/index.html
Hyperion EMP System 11.1.1.3:
Installer
Foundation Services (4 Files )
EMP Architect
Financial Management, Planning, Financial Reporting and Web Analysis (primarily interested in FM)
http://www.oracle.com/technology/software/products/bi/performance-management/index.html
The following are the sequences of steps carried out during the Installation and Configuration of EPM:
1)     Installed the Server along with its respective SP2 – Shutdown the machine
2)     Assigned IP and DNS addresses
3)     Installed Window components by ticking Application Server Console, Enable COM+ access, IIS and DNS
4)     Run “dcpromo” to create a Domain Controller with default values and assigned a domain name – Shutdown the machine
5)     Installed Weblogic Server 9.2 and configure it using Configuration Wizard – Selected “test environment” and ticked default “listening port” – Shutdown the machine
6)     Basic installation of Oracle Database 10gR2 using Step-by-Step guide provided by Oracle and carried out Password Management steps. After installation, I then created a user “oracle” and assigned it to ora_dba User Group with the required Local Security Policies – “log on as a batch job” and “Act as part of operating system”
7)     Logged into database and acknowledge the licensing window – Shutdown the machine
8)     Restarted the machine and checked all relevant and newly installed Database and WebLogic services are running.
9)     Started Installing EPM components by double clicking “InstallTool.cmd” and selected all relevant components at ONCE as per Installation Guide – Result: - All selected EPM components were successfully installed without errors or exceptions
10)     At the end of installation window, I carried out the configuration in the following scearios:
Scenario 1: Configuration all at Default settings
Scenario 2: Configuration all, except “Application Server” I selected the WebLogic9.2
Scenario 3: Configuration all, except “Application Server” and “Workspace Web Server” were being Welogic9.2 and IIS HTTP
RESULT: After all numerous installations, all came down to ONE ERROR from “Diagnostic Report” stating the following:
Financial Management:
FAILED SVR: HFM Service Validation Check if HFM service in working state.
Error: Error message: <03/11/2010 05:32:26 PM> CreateApplicationCAS... Failed at line: 2
Recommended Action: Make sure HAT utility is working. 1 s
I then simply ignored this error and tried to deploy an Application, all worked fine until you get to the point at “Job Console” where you need to press “Refresh” button. Progress remained at 12% until it got timedout after 300 seconds and force attempt of refreshing resulting in “aborted” job with the following error:
Error Reference Number: {DB3940F5-2D4A-46AB-A370-77F82F121BBA}
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:39:58 PM;Svr: PBAR;File: CHsvDataSourceImpl.cpp;Line: 196;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1276;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1190;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: AgentHelper.cpp;Line: 728;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 1;DTime: 4/12/2010 4:40:08 PM;Svr: PBAR;File: CHfmAwbAgent.cpp;Line: 744;Ver: 11.1.1.3.0.2413;
This is, I believe preventing me from deploying Consolidation Apps, including Sample Application provided with EPM Downloads. I have tried installing and configuring by components. All failed with the same outcome.
I have been working on this effortlessly in different combinations to get at least one Financial Management Application get deployed so I could enhance my learning adventure. As it stands, I am not sure where to get help and completely lost in the World of Oracle. I am also come to wonder whether “Free Downloads of EPM” are indeed, is “complete and is in working-state” or do I need a licence to use for personal learning experience? Are there different downloads for different needs or/users For example, eDelivery downloads are different from OTN Agreement downloads?
I have downloaded the files from following URL:
http://www.oracle.com/technology/software/products/bi/performance-management/index.html
I am completely lost and all services are up and running and not sure what I am missing!! Any assistance will be greatly appreciated.
Many Thanks
BT
Edited by: user8973921 on 13-Apr-2010 05:08
Edited by: user8973921 on 13-Apr-2010 10:56
Edited by: user8973921 on 14-Apr-2010 02:30

I am having exactly the same problem using Windows 2003 Standard editions SP2. Is there anyone who knows a possible solution for this? The effect on HFM is that is not possible to create an application, since I always get an error that says "Server execution failed"
Error Reference Number: {E68F87E6-588E-4665-862C-AAB02CB299DA}
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServerImpl.cpp;Line: 3522;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 1115;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 857;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxClient.cpp;Line: 2106;Ver: 11.1.1.3.0.2413;

Remote Desktop Management service not starting. service-specific error: %%2284126209 - Event ID: 7024

Hi Forum members,
We have a client that has intermittent issues with RDS on a 2012 R2 server.
As an overview of the environment, the client has a single VMWare host support 2 x Windows 2012 R2 VMs one is the File/Print/Email server and the 2nd is the RDS server used to allow the client to run MYOB Enterprise. Both servers have the AD DS role and
DNS roles amongst others.
The 1st issue is that the RD Connection Broker shows the error: "The server pool does not match the RD Connection Brokers that are in it. and then "1. Cannot connect to any of the specified RD Connection Broker servers".
The above issue seems to be caused by the RDMS service not starting. When you attempt to start it, the service stops and the error in the title is logged in the "System" event log. Full transcript below:
Log Name:      System
Source:        Service Control Manager
Date:          21/01/2015 4:50:32 PM
Event ID:      7024
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      intentionally removed.local
Description:
The Remote Desktop Management service terminated with the following service-specific error: %%2284126209
Event Xml:
<Event xmlns="
<System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7024</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T05:50:32.129949400Z" />
    <EventRecordID>53721</EventRecordID>
    <Correlation />
    <Execution ProcessID="568" ThreadID="12436" />
    <Channel>System</Channel>
    <Computer> intentionally removed.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">Remote Desktop Management</Data>
    <Data Name="param2">%%2284126209</Data>
    <Binary>520044004D0053000000</Binary>
</EventData>
</Event>
In addition in the "Application" event log, the following error is logged:
Log Name:      Application
Source:        MSSQL$MICROSOFT##WID
Date:          21/01/2015 5:24:47 PM
Event ID:      18456
Task Category: Logon
Level:         Information
Keywords:      Classic,Audit Failure
User:          NETWORK SERVICE
Computer:      intentionally removed.local
Description:
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
Event Xml:
<Event xmlns="
<System>
    <Provider Name="MSSQL$MICROSOFT##WID" />
    <EventID Qualifiers="49152">18456</EventID>
    <Level>0</Level>
    <Task>4</Task>
    <Keywords>0x90000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T06:24:47.000000000Z" />
    <EventRecordID>4228336</EventRecordID>
    <Channel>Application</Channel>
    <Computer>intentionally removed.local</Computer>
    <Security UserID="S-1-5-20" />
</System>
<EventData>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data> Reason: Could not find a login matching the name provided.</Data>
    <Data> [CLIENT: <named pipe>]</Data>
    <Binary>184800000E0000001F00000055004E0047004500520045005200410055005300530056005200300033005C004D004900430052004F0053004F0046005400230023005700490044000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I have been attempting to resolve these errors for some time, without success. I have read the many KBs and forum entries related to the above and applied a number of the suggested fixes, including the one which suggests to add the NT SERVICE\ALL SERVICES
to the "Logon as a Service" in the "User Rights Assignment" of the "Default Domain Policy" which is linked to the domain level, that both servers are objects of.
My question to the forum is, can anyone come up with a solution to resolve the above issues and all the RDMS service to start which will then hopefully resolve the broker error?
Regards,
David West.

Hi David,
If virtual machines on the server are Windows Server 2012, then it is not supported to install Remote Desktop Connection Broker on a Domain Controller.
More information for you:
Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012
http://support.microsoft.com/kb/2799605/de
Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
http://support.microsoft.com/kb/2833839
If the VMs are Windows Server 2012 R2, I suggest you install RDS on a separate machine to see if the issue persists.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Getting error when trying to create Exchange Connector in System Center Service Manager 2012

Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-IT

Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support

How to fix Adobe App Manager error code -60 Download appears corrupt but only for Photoshop CS6 app

How to fix Adobe App Manager error code -60 Download appears corrupt but only for Photoshop CS6 Creative Suite Cloud App. Many attempts were made to install Photoshop CS6 with Adobe Application Manager without success. Every other Creative Suite Application was successfully downloaded. I keep getting Installation Failed when attempting the Photoshop install. How does one correct this?

Thanks Jeff! So, it totally appears as if it was a network issue. The corporate network where I work is quite likely the culprit. Where I was thrown off is that since I have admin rights on my computer, I can install software. But using Adobe Application Manager to install Adobe software wasn't working. And to make matters worse, there didn't appear to be any way to install Acrobat Pro for Mac without using AAM. The workaround that I used previously was to install the trial versions of Adobe software, and then just register them using my username and password. But the workaround for being able to install everything using AAM was to bring my computer home and download from my home network.

CS6 Service Manager Error 0xc000007b

Similar Messages

Maybe you are looking for