CS6 stamp tool doesn't work with action / record ( tool record is enabled ) other tools works

At one time tool recording was not possible and if you install Adobe Scriptlistener Plug-in Adobe will disable tool recording its never an option.
I use and record actions all the time and was looking forward to tool recording when Adobe announced it. However I found what they delivered was of very limited value because of the restrictions. I do not care that Adobe disables tool recording on my machine.
The amount of data that gets reordered seems also vary between machines. I found that Action recorded on fast machine are not usable on slow machine. Fast machine recorder too much data.
Documents you use such action on must also have the same size and resolution as the document you recorded the action on. Quite a restriction.
You problem may also be foxed in CC 2014 sett here Photoshop CS6 - Recording the clone tool in an action gives incorrect results on replay.

Similar Messages

How do I get a virtual lab to play,quicktime does not work with this CD,I have quicktime on other computers works fine with this CD. Technician said Cd could

How do I get a virtual lab to work on this computer. The technician said the CD is not compatible. Maybe corrupt. He seemed he did not know
what he was talking about. I asked him was it any software I could download he said no. This CD works fine on my other computer, no it is not an apple computer. And I use quicktime on both computers. But on this apple computer quicktime does not play this CD, which this type
of CD works better with quicktime. Any suggestions on how to solve this problem. This is a new computer, I would hate to think their is nothing that can be done.

I need step by step instructions on how to get my virtual lab cd to work. The technician said cd not compatible or is corrupt. I do not believe their is nothing that can be done. When I put the cd in the side slot nothing comes up on the screen. I have tried several ways, the technician did not seem very knowledgeable on what to do. Also this cd plays fine on my other computer which is not an apple computer. Is there anything I can do to correct this?

WHY can't Apple get their Java to work with Homestead SiteBuilder??!! Please someone work this out :(

WHY can't Apple get their Java to work with Homestead SiteBuilder??!! Please someone work this out

Is Java enabled in Safari / Preferences - Security?
Try the SiteBuilder help center.
Perhaps using a different browser may help.
Try Firefox or Chrome.
Mozilla Firefox Web Browser — Free Download
Google Chrome - The web is what you make of it

Why is Adobe Flashplayer not working with Apple? Do you have an other flash program you recommend?

Why is Adobe Flashplayer not working with Apple? Do you have an other flash program you recommend?

maj-brittfromsjöbo wrote:
Thank you for your interest in Adobe Flash Player. Unfortunately Apple does not allow Flash Player to be installed on iPhone or iPad.
May I add, this is the answer I get When I try to Download Adobe Flash Player
You get the message because that is exactly the situation. Apple has not allowed any Flash on iOS devices.
What site are you trying to see? Many sites now provide Flash alternatives. For example, if you want to listen to Pandora, instead of using the Flash on the Pandora website, instead you download the Pandora app for the iPad.
In the future, even if Apple wants to add Flash to the iPad, it won't be able to because Adobe will no longer be making it at all, for any mobile device:
http://www.wired.com/gadgetlab/2011/11/adobe-kills-mobile-flash/
If you often go to sites that use a lot of Flash and they don't have an alternative, you should write to them and tell them to stop using Flash.

HT1338 I can't get Facetime to work with my MacBook. It works with my iPhone so I know my WIFI is working fine. Is it the Facetime App or some other technical difficulty? THanks

I can't get My Face Time App for my Macbook to connect. It works with my iPhone so I know my Wifi is working properly. From veiwing the ratings at the App store this is a commmon problem. Wondering if there is anything I can or should do?

I can't get My Face Time App for my Macbook to connect. It works with my iPhone so I know my Wifi is working properly. From veiwing the ratings at the App store this is a commmon problem. Wondering if there is anything I can or should do?

HT203796 Why won't icloud work with outlook 2013 on a PC anymore? It worked prior to windows 8.1 update.

Why won't icloud work with outlook 2013 on a PC anymore? It worked prior to windows 8.1 update.

Would like to add that I have tried unloading outlook 2013, reinstalling itunes and icloud and still get the "install could not start do to unexpected error" when trying to install icloud controll panel and sync.

Until the most recent update when the autocomplete location bar was selected, it "went" with no further clicking. Now I have to click the refresh arrow. It won't even work with the return. How can I make it work the old easier way?

Until the most recent update when the url that I wanted in the autocomplete location bar was selected, it "went" with no further clicking. Now I have to click the refresh arrow. It won't even work with the return. How can I make it work the old easier way?

cor-el, thank you so much. That fixed it, but does this mean I can't use AVG Safe Search.Is there a substitute? I do like the security (hopefully real) that it offers. What now? How do I get out of Safe Mode?
Sherry

Batch processing does not work with action

Here is the thing. I have implementes several action on Photoshop. SOme of the include several sub actions and different saving locations. For example, I open a file, then I hit my prefered key combo for that action, and I have:
1) convert to cmyk
2)save copy as JPG with 11 quality level
3) save to folder A
4) image size to 72 dpi
5) covert to RGB
6) save as JPG 6 quality level
7) save to folder B
8) close file and discard cahnges.
Everything runs like heaven, but the moment I want to batch several files everything stalls.
I choose file > Batch > Choose my set > choose my action
Source > I choose where my files are (usually a PDF)
then I use "Supress file open options dialogs"
Destination> Since I already have set destinations y my actions, I choose here a "dump" folder
On errors > I hit Save As... and put a name for that log.
Then photohop opens my PDF on Photoshop and does nothing! It keeps my file open.
I m gettting frustated here, because I ma about to work with 400 files to batch, and this batch system does not work.
I am using CS6
Any clues

Your action doesn't to seem to include any Open actions. Why do you have the "Supress" option enabled?
Also, since your action has the two save commands, you would just leave the Destination set to None. Setting a Destination means that is going to save the files again.
The problem you'll run into though is that the action also saves the file name as part of the action, so that you'll end up just saving over the one file each time the action is played back on your 400 files. So Photoshop will process all the files, but each time it will overwrite the first file, so you'll end up with one file in each folder. Normally, in these situations, you'd use the Destination setting and use the "Overrride Action "Save As" Commands", which would substitute the Destination folder for whenever a Save command is used. The problem here is that you can only choose a single destination folder, so all files would be saved to the same location.
Short of scripting this, it may be best to break this into two separate actions.

My brushes won't work with actions in Photoshop such as Save the Dress, Ying-Yang, or Foundation

When I try to use my brushes with actions in Photoshop, such as Save the Dress, Ying-Yang, or Foundation, they won't work. I've tried resetting the brushes, changing the opacity, restarting the program, and unlocking the layers. It was working perfectly, but suddenly just stopped. When I click on the image, it doesn't do anything. There is also a small black box next to the action the I am using in the history box. When my brushes were working, that box would show in white where I used the brushes on my pictures, but now it doesn't register anything that I try to do.

christyh61213853 wrote:
Have u gotten an answer from anyone on ur situation with the brushes? I am unable to use my brushes as well and I can't figure it out also...
You would do better starting a new thread, rather than bump a thread from 2012. Some of those posters might not have used this forum for years, and a lot has changed regards both Photoshop and operating systems since 2012
You need to give specific information about _your_ problem.
What version of Photoshop?
What operating system?
Which brushes, and if not standard, where did you get them from, or did you make them?
What is happening, and what have you tried so far to fix it?

The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android phone worked perfectly with my car. Even the tech guy at Lexus couldn't get it to work. What is apple doing to fix this.

The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android worked perfectly with my car. Even the tech specialist at Lexus couldn't get it to work. Lexus said that other iPhone 5s were having the same problem. What is apple doing to fix this?

Going to the local Apple store this morning...
My problem is not uncommon as the board is showing signs of this happening to many others as well. That is where I found the restore and reboot information to try to solve the issue of crashing apps.
I understand that Apple will not "give away the cow", but letting iPhone users know that the problems they are having are being addressed by Apple is a little more comforting than nothing at all. Other wise, all the apps in world are useless and even more importantly worthless, if a person has to reset/reboot/reload just to get them to work.
IF Apple can not address the basic problems with todays iPhone apps, why should one believe that the iPhone 3.0 OS is any better? Using a PC comparison, which is better, XP or Vista. If the current iPhone OS of 2.2. what ever is not working that well (as related to down loaded apps and iTunes), will OS 3.0 be any better?
The waste of time I refer to is in going to the apps store and downloading the apps... Again why by apps if the free version does not work?

Better touch tool works with touchpad but not magic trackpad, better touch tool works with touchpad but not magic trackpad

better touch tool gestures works with touchpad but not magic trackpad, why please ?

this was an error problem solved

Can a 32-bit version of Firefox work with a 64-bit plugin and the other way around?

I'm using a notebook with Windows 7 x64 and Firefox 4.0.1 x86 and I used to have JDK 1.6.0.24 x64 installed, and also it's corresponding public JRE (also x64). Yesterday, I noticed that Java applets didn't work in Firefox. It asked me to install the required plugin. I did, and JRE 6u22 x86 was installed alongside. Now Java applets did work, hurray.
Because I didn't want multiple (old) JRE's, I uninstalled all of them and installed JDK 1.6.0.25 with it's public JRE instead. Again, 64-bit. Now Firefox refuses to notice Java again. The plugin menu doesn't show any Java-related plugins. (Not even Java Deployment Toolkit, which used to be there before.) I have tried setting the current Java distribution as default for all browsers with the Java Control Panel, but that didn't work.
Is this just because Firefox x86 can't deal with x64 plugins? Should I download a x64 build of Firefox instead? Or will that make the rest of my addons stop working?
EDIT: currently I removed the 64-bit JRE and installed its 32-bit variant. Everything works again, also in Firefox. I would still prefer to have everything 64-bit though.

Mozilla hasn't yet released a 64-bit version of Firefox for Windows, they're all 32-bit.
Namoroka is a pre-release version used for testing new features and security fixes, and was available in 32-bit and 64-bit variants for all OS's. Currently only the Nightly version is available in a 64-bit versions for Windows - currently Nightly 10.a1.
You can get the latest release version here. For Windows it is a 32-bit application. <br />
http://www.mozilla.com/en-US/firefox/

My Epson printer stopped working with Firefox today. It does test pages, will work on Notebook, and will work with IE. Up until today it worked with Firefox. Why can't I print anything from the internet with Firefox?

Up until today, I did everything with Firefox. Then I was on Paypal and went to print a shipping label and the printer would not work. I went to troubleshoot page and it printed a test page. I uninstalled my printer and then re-installed it. Still would not work from an internet page. I did a system restore. Still didn't work. Called Epson. They say it's a Firefox problem because it works on Notebook and test pages. I installed IE and the printer works. What happened and how can I get it back working with Firefox?

I have the same problem, I cannot print PayPal shipping label off of Firefox. I did the about.config entry and have seen that the print.print_printer does not exist at all in the list of entries. I use Vista 32. I use an Epson 545 wirelessly.
Can anyone help?

Adobe programs dont work with Captivate to capture/record

Hi there.
I've had problems with Captivate capturing screen recording from Adobe Premier cs5, where it would not show any of the video which was being edited. I figured this was just the video issue and worked around it by just not showing the video preview for the small thing i was demonstrating, it wasnt a big deal if it was just isolated to this.
Next I was using Adobe Photoshop and setting up a little demo on how to fill objects. Captivate did not pick up the cursor, it shows a ugly black box.
I also want it to pick up the full motion of my mouse cursor in photoshop, but it doesnt come close, so as im narrating how to do something, my actual mouse is not showing at the same time as im saying it which is essential when you are trying to show a way to FILL a certain area of a shape.
I had plans to do many things with captivate, now it seems i am going to have to switch back and forth with Camtasia, convert to AVI the parts that Captivate does not handle, and then import them into Captivate to make my demonstrations look seemless???
I have a lot planned for Adove CS5 Flash, is this also going to give me the same problem?
I have already searched for a solution tot his, and everyone has said that captivate does not capture things where there is overlayed content etc etc...
This strikes me slightly insane when Camtasia does it so well, and Im using an Adobe program to provide training on Adobe programs...
If anyone knows any delevopers for captivate on here, can they PLEASE look at this right now as im slapping myself wondering why this is the case and how im going to plan to do all the simulations half with camtasia and half with captivate on Adobe products we use at my work.....
Oh see the below link around slide 42 to get an example of what im saying here..
http://www.blcstudents.com.au/tutorials/col-fill/colour-fill.htm
or you can check out
http://www.blcstudents.com.au/tutorials/wp/?page_id=35 its at the bottom of the page.
Anyway im worried about what to be doing at this point, I got captivate for adobe products, not for other products and programs out there.
Cheers for any help,
Ben.

Just out of curiosity, are you able to modify the mouse cursor AFTER doing the captures once you're back in Captivate editing them?
For example, are you able to select the mouse for the slides where it added this wierd square cursor, then choose the normal arrow cursor from the Properties tabl > Options accordion?
Or are you able to delete the mouse from these same slides, and add it back again, and then select the cursor you want?
Have you found that there is nothing you can do to change this particular cursor on these slides?

Oracle 11g XE not working with oracle BI publisher 10g after enabling ACL

Hello,
I previously work with oracle 10gXE and Oracle BI publisher 10g and it work fine. now i install oracle 11g XE and try to configure it with oracle Bi Publlisher, it show this error
"ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1324 ORA-12570: TNS:packet reader failure" after runing the ACL package to neable network service.
on the database.
Please can any body tell be why this is not working. Tanx.

You'll need to add the apex engine owner to the ACL (Access Control List). Depending on your version of apex the user name varies. i.e. 4.0 is APEX_040000
See Joel's blog for info about the ACL and APEX.
[http://joelkallman.blogspot.com/2010/10/application-express-network-acls-and.html]

CS6 stamp tool doesn't work with action / record ( tool record is enabled ) other tools works

Similar Messages

Maybe you are looking for