CS6: tab index and access key

are the tab index and access key features available in CS6?

Depends on which version you have. I think most Accessibility features were deprecated in 12.2.
Nancy O.

Similar Messages

Tab Canvas and Access Keys

I need to be able to navigate between tabs on a canvas using just keyboard access keys, similar to access keys on buttons.
Can anyone advise on if this is possible and if so how??
Many Thanks,
Jayesh Kavia

I'm want to change my forms resource file to map a key for next tab and previous tab:
eg, for Alt+C to exit a form the entry is:
67 : 8 : "Alt+C" : 32 : "Exit"
Where 32 is the Forms Function Number.
Does anyone know what the forms function numbers for next / previous tab are?
Many Thanks,
Jayesh Kavia

Creation of developement class,package and access key

COULD ANYBODY EXPLAIN about
creation of developement class,package and access key
and who will create them?

Working With Development Objects
Any component of an application program that is stored as a separate unit in the R/3 Repository is called a development object or a Repository Object. In the SAP System, all development objects that logically belong together are assigned to the same development class.
Object Lists
In the Object Navigator, development objects are displayed in object lists, which contain all of the elements in a development class, a program, global class, or function group.
Object lists show not only a hierarchical overview of the development objects in a category, but also tell you how the objects are related to each other. The Object Navigator displays object lists as a tree.
The topmost node of an object list is the development class. From here, you can navigate right down to the lowest hierarchical level of objects. If you select an object from the tree structure that itself describes an object list, the system displays just the new object list.
For example:
Selecting an Object List in the Object Navigator
To select development objects, you use a selection list in the Object Navigator. This contains the following categories:
Category
Meaning
Application hierarchy
A list of all of the development classes in the SAP System. This list is arranged hierarchically by application components, component codes, and the development classes belonging to them
Development class
A list of all of the objects in the development class
Program
A list of all of the components in an ABAP program
Function group
A list of all of the function modules and their components that are defined within a function group
Class
A list of all of the components of a global class. It also lists the superclasses of the class, and all of the inherited and redefined methods of the current class.
Internet service
A list of all of the componentse of an Internet service:
Service description, themes, language resources, HTML templates and MIME objects.
When you choose an Internet service from the tree display, the Web Application Builder is started.
See also Integrating Internet Services.
Local objects
A list of all of the local private objects of a user.
Objects in this list belong to development class $TMP and are not transported. You can display both your own local private objects and those of other users. Local objects are used mostly for testing. If you want to transport a local object, you must assign it to another development class. For further information, refer to Changing Development Classes
http://help.sap.com/saphelp_46c/helpdata/en/d1/80194b454211d189710000e8322d00/content.htm
Creating the Main Package
Use
The main package is primarily a container for development objects that belong together, in that they share the same system, transport layer, and customer delivery status. However, you must store development objects in sub-packages, not in the main package itself.
Several main packages can be grouped together to form a structure package.
Prerequisites
You have the authorization for the activity L0 (All Functions) using the S_DEVELOP authorization object.
Procedure
You create each normal package in a similar procedure to the one described below. It can then be included as a sub-package in a main package.
To create a main package:
1.       Open the Package Builder initial screen (SE21 or SPACKAGE).
2.       In the Package field, enter a name for the package that complies with the tools Naming Conventions
Within SAP itself, the name must begin with a letter from A to S, or from U to X.
3.       Choose Create.
The system displays the Create Package dialog box.
4.       Enter the following package attributes:
Short Text
Application Component
From the component hierarchy of the SAP system, choose the abbreviation for the application component to which you want to assign the new package.
Software component
Select an entry. The software component describes a set of development objects that can only be delivered in a single unit. You should assign all the sub-packages of the main package to this software component.
Exception: Sub-packages that will not be delivered to customers must be assigned to the HOMEsoftware component.
Main Package
This checkbox appears only if you have the appropriate authorization (see Prerequisites).
To indicate that the package is a main package, check this box.
5.       Choose Save.
6.       In the dialog box that appears, assign a transport request.
Result
The Change package screen displays the attributes of the new package. To display the object list for the package in the Object Navigator as well, choose from the button bar.
You have created your main package and can now define a structure within it. Generally, you will continue by adding sub-packages to the main package. They themselves will contain the package elements you have assigned.
See also
Adding Sub-Packages to the Main Package
http://help.sap.com/saphelp_nw04/helpdata/en/ea/c05d8cf01011d3964000a0c94260a5/content.htm
access key used for change standard program.
www.sap.service.com

FYI -- Tab Index and Safari 4 (Mac)

I finished building a website recently and had incorporated Tab Sets on a few different pages. Additionally some Accordion Sets as well. Didn't think anything of it and finished off the project - let the site go live and haven't thought much about it since - except to tweak a few things and make some minor edits at the request of the client.
One thing I had noticed repeatedly during the last half of the project as I was testing was all of a sudden this semi-translucent - grey - maybe 6px thick border would appear every time I clicked on a Tab or Accordion Tab (see screenshot below - No - the project was not for IHOP - just an example to show). During this time the Safari 4 Beta had come out and I had grabbed a copy to play with. Lots of interesting stuff in the Beta and several things I have noticed there and in the Final release. For one thing Safari 4 Beta/ Final both handle Color Profiles different than Safari 3 or FF 2.x and 3.x. I had this muted green background image (PNG file) that would show up fine in FF or Safari 3 but Safari 4 Beta/ Final both had it showing up as this bright Lime-green color. Even IE 7 had it showing correctly - and Explorer doesn't typically play nice with PNGs - even version 7.
Anyway - back to the Tabs. That prompted me to pay more attention to the differences in the versions. At first - I thought it might simply be some testing mechanism in the Beta. As it was also showing up in the WebKit Nightlies (look it up). But when Safari 4 Final was released this same grey box surrounding the Tabs/ Accordion Panels was still there. It was bothering me but I had more important things to tend to.
Tonight - I was testing something unorthodox with Tabbed Panels (no dirty thoughts) - just trying something out a client had mentioned they'd like done with their site. Leave it to a random client to ask for the impossible and expect it to happen. Yay! Well as I was testing stuff out there this grey border/ box was again. I went out to Adobe's Site - Apple's Site - Yahoo - and a couple of other big names that I knew had some form of Tabbed Paneling. Their websites weren't doing it. Well - I couldn't vouch for anyone other than Adobe using the SPRY Framework and wondered why Adobe had no problem getting rid of this grey border but I couldn't.
The main site code was a little chaotic to start with - knew this from previous experience - so I jumped to the Labs and looked at the Tabbed Panels Samples:
http://labs.adobe.com/technologies/spry/samples/tabbedpanels/tabbed_panel_sample.htm
Very interesting results. I found that some of the examples were showing the grey border while other were not - on the same sample page. Much easier than the main site as the code on the Labs Sample pages is straight forward and there for everyone to use.
Turns out it's the tabindex="0" element that gets listed along with the TabbedPanelsTab Class in the Tabbed Panels or the main Accordion DIV. I don't know whether there is a way to disable this or not - but it's what was default when I built my pages and inserted the SPRY Frameworks. And with a simple "Search and Replace" - it goes away rather easily. Once I figured that out - it was gone and that makes me like my client's new site just a little bit more.
Anyway - thought I'd share. I'm not following up on this or tracking it or whatever this forum has to do that sort of stuff with - like I said just an FYI (on the fly). The TabIndex element is good for Compliancy and Accessibility stuff - so it's nothing to totally kick to the curb. And I'll probably have to later go back and figure out a balance between the annoying grey border and compliancy demands at some point in the future - but I'll jump off that bridge when I get there.
Later!

The border that you are referring to is called the outline. It usually helps the users to identify where they have clicked.
You can simply delete the outline by adding the following to affecting css selector in your style sheet:
outline:none;

IDES ABAP Workbench and access key

Hi everyone,
I am new to SAP, please Help.
1. How i can use OSS ID.
2. I installed 4.6B IDES, but ABAP - Workbench is not
accessable.
3. How i can get Access Key for ABAP Workbench.
Thanks in Advance
Shareef

Hi,
If you have OSS ID, you can use it to logon to service.sap.com where you have all kinds of support and help services available. That is where you use it.
ABAP workbench will be accessible if you have authorization. I think you mean to say you are not able to create/change objects. For this you will have to register your userid as developer (again at service.sap.com) and that will give you the developer access key that you can then use.
If you are changing any SAP object, you will need to get the corresponding key from OSS.
If you do not have OSS logon, then you can forget about it (well, not strictly so, but that is the official 'truth'.).
cheers,
Ajay

InDesign CS6 Std working and accessing ID files over WAN.

Could you please share experiences Windows 7 64 bit InDesign CS6 Std opening and working with 100-120MB files over public ISP WAN using VPN?
Right now very often we experience unresponsive screens of CS6, while nothing happens during 10 minutes and ID needs to be closed from Task manager.
Usually this is a result of some action, ID button or mouse click.
Background is, that enterprise has a central InDesign file depository, where ID files can be accessed and worked with from different countries.
While transfer speed of our local ISP is 20/10 Mbit, depository side server real life bandwidth and server access speeds are variable and unknown.
Is there some option to set up in local PC, which could improve performance over WAN?

I agree with Bob. For best performance, I'd recommend copying the files locally if possible. Although it's very common to work over a LAN, I beleive that Adobe's official policy is that they don't support working over a network. What this means is that if you call Adobe support with a problem, they'll have you copy the file locally. If that solves the problem, they're done. This is their way of avoiding network troubleshooting for hundreds of different types of servers.

Tab keys and access keys

I filled in the required info for dynamic textboxes in the
accessibility panel but the tab keys still do not work in the exe
file. Flash CS3.
Any clues?
Thanks.

I'm want to change my forms resource file to map a key for next tab and previous tab:
eg, for Alt+C to exit a form the entry is:
67 : 8 : "Alt+C" : 32 : "Exit"
Where 32 is the Forms Function Number.
Does anyone know what the forms function numbers for next / previous tab are?
Many Thanks,
Jayesh Kavia

UNIQUE INDEX and PRIMARY KEYS

Hi Friends,
I am confused about primary keys.
What is the purpose of this key again? I know it is used for unique constraints.
Supposing I have a table with two (2) columns which are each indexed as unique.
Then they can me both candidate at primary key right?
So why do I need a primary key again? when I have 2 columns which are uniquely index?
Thanks a lot

A UNIQUE index creates a constraint such that all values in the index must be distinct. An error occurs if you try to add a new row with a key value that matches an existing row. This constraint does not apply to NULL values except for the BDB storage engine. For other engines, a UNIQUE index allows multiple NULL values for columns that can contain NULL
The differences between the two are:
1. Column(s) that make the Primary Key of a table cannot be NULL since by definition; the Primary Key cannot be NULL since it helps uniquely identify the record in the table. The column(s) that make up the unique index can be nullable. A note worth mentioning over here is that different RDBMS treat this differently –> while SQL Server and DB2 do not allow more than one NULL value in a unique index column, Oracle allows multiple NULL values. That is one of the things to look out for when designing/developing/porting applications across RDBMS.
2. There can be only one Primary Key defined on the table where as you can have many unique indexes defined on the table (if needed).
3. Also, in the case of SQL Server, if you go with the default options then a Primary Key is created as a clustered index while the unique index (constraint) is created as a non-clustered index. This is just the default behavior though and can be changed at creation time, if needed.
So, if the unique index is defined on not null column(s), then it is essentially the same as the Primary Key and can be treated as an alternate key meaning it can also serve the purpose of identifying a record uniquely in the table.

2 problem with BITMAP JOIN INDEX and access plan

On my schema ("LSA") I have 3 tables:
AAB_VENDUTO (~4.200.000 record)
AAB_ARTICOLO (~8.200 record)
AAB_CLIENTE (~15.000 record)
AAB_ARTICOLO.MARCA has 1079 distinct values
AAB_CLIENTE.TITOLO_STUDIO has 22 distinct values
I create 2 different bitmap join index:
CREATE BITMAP INDEX lsa.AAB_V_ARTICOLO_MARCA_IDX ON LSA.AAB_VENDUTO(MARCA)
FROM LSA.AAB_VENDUTO vv, LSA.AAB_ARTICOLO aa WHERE vv.articolo_id=aa.articolo_id;
CREATE BITMAP INDEX lsa.AAB_V_CLIENTE_TIT_STUDIO_IDX ON LSA.AAB_VENDUTO(TITOLO_STUDIO)
FROM LSA.AAB_VENDUTO vv, LSA.AAB_CLIENTE cc WHERE vv.cliente_id=cc.cliente_id;(star_trasformation_enabled is TRUE)
I run (on SQL Developer 1.5.5) these similar queries:
SELECT DISTINCT VV.cliente_id FROM LSA.AAB_VENDUTO VV JOIN LSA.AAB_ARTICOLO AA on VV.articolo_id=AA.articolo_id
WHERE (MARCA='ALGIDA' OR MARCA='SAMMONTANTA');
SELECT DISTINCT VV.cliente_id FROM LSA.AAB_VENDUTO VV JOIN LSA.AAB_CLIENTE CC on VV.cliente_id=CC.cliente_id
WHERE (titolo_studio='LAUREA BREVE' OR titolo_studio='MAGISTRALE');The first one use correctly the bitmap join index, this is the access plan:
!http://bitlgs.altervista.org/_altervista_ht/marca.png!
but the second query...
!http://bitlgs.altervista.org/_altervista_ht/titolo_studio.png!
why the second query doesn't use the bitmap index?
problem #2:
I create another bitmap index:
CREATE BITMAP INDEX LSA.AAB_V_CLIENTE_SESSO_IDX ON LSA.AAB_VENDUTO(SESSO)
FROM LSA.AAB_VENDUTO vv, LSA.AAB_CLIENTE cc WHERE vv.cliente_id=cc.cliente_id;and I run this query:
SELECT VV.cliente_id, COUNT(*) FROM LSA.AAB_VENDUTO VV JOIN LSA.AAB_CLIENTE CC on VV.cliente_id=CC.cliente_id
WHERE sesso='Donna' and (titolo_studio='LAUREA BREVE' or titolo_studio='MAGISTRALE') GROUP BY VV.cliente_id;this is the access plan:
!http://bitlgs.altervista.org/_altervista_ht/terzo.png!
In my opinion, the part that I have marked as 'A' is superfluous...
why it make a join with AAB_CLIENTE table? Why it filter again the titolo_studio and sesso field?
Edited by: Nirpol on 4-set-2009 13.25

Nirpol wrote:
I create 2 different bitmap join index:
CREATE BITMAP INDEX lsa.AAB_V_ARTICOLO_MARCA_IDX ON LSA.AAB_VENDUTO(MARCA)
FROM LSA.AAB_VENDUTO vv, LSA.AAB_ARTICOLO aa WHERE vv.articolo_id=aa.articolo_id;
CREATE BITMAP INDEX lsa.AAB_V_CLIENTE_TIT_STUDIO_IDX ON LSA.AAB_VENDUTO(TITOLO_STUDIO)
FROM LSA.AAB_VENDUTO vv, LSA.AAB_CLIENTE cc WHERE vv.cliente_id=cc.cliente_id;
What happens if you just create two plain bitmap indexes without the join?
CREATE BITMAP INDEX lsa.AAB_V_ARTICOLO_MARCA_IDX ON LSA.AAB_VENDUTO(MARCA);
CREATE BITMAP INDEX lsa.AAB_V_CLIENTE_TIT_STUDIO_IDX ON LSA.AAB_VENDUTO(TITOLO_STUDIO) ;You can also go with normal indexes on the FK rows (cliente_id) and the optimizer can do a bitmap conversion from normal index to bitmap index if needed. Are the column values evenly distributed? If not you might need to go for some column histogram. but I don't have the impression that this is really useful in your case.

Local ReadWriteBackingMap and access keys

I am looking for some code to have a storage node access it's local ReadWriteBackingMap and get a list of all keys that are local to that node. I am assuming this is possible??
thanx
kevin

Hi Kevin,
where would you like to run this code? Your own thread, or a thread managed by Coherence related to the cache service of the cache corresponding to the backing map?
Such threads managed by Coherence is probably not a good good place for this.
Provided that you use 3.4, from your own thread you can do a query for keys where you constrain your query with a PartitionFilter to partitions owned by the respective member. However, it is possible that the list of owned partitions changes between you get the info and you act upon it (actually you can't really avoid this problem).
Member member = CacheFactory.getCluster().getLocalMember();
PartitionSet partsMember = service.getOwnedPartitions(member);
Filter filter = new PartitionedFilter(AlwaysFilter.INSTANCE, partsMember);
Set setKeysForMember = cache.keySet(filter);
// repartitioning in the meantime might have moved
// some of these partitions to different nodes and some new partitions
// on this node
// as a result some of the keys might not be local anymore
// also some local keys might not be in the resultAs for directly accessing the backing map, it is a very dangerous idea unless you know exactly what you try to do.
You should also consult the documentation of PartitionedFilter.
Best regards,
Robert
Edited by: robvarga on Oct 27, 2008 6:11 PM
Edited by: robvarga on Oct 27, 2008 6:11 PM

How to Implement Abap Object and Access Key for se24 developers.

Hi every One,
This is Abdul Rahman, Started Learning Abap Objects i want a simple program to be executed i.e. in Local class (Abap program)and as well in global class(class builder).
Also i would like to know When ,Were and Why Abap Object should be used.
prob to Me :- When i wanted execute F8 a Class in se24 Class Builder it is asking me AcessKey , plz if this is required plz any one send Me.
I have this key 36687663221261278694 it is already used in Abap editor , it is not accepting in se24 .
plz help Me , waiting for response ..
thankyou so much
Abdul Rahman.

Hello Abdul
Here are my answers to your questions:
(1) Local classes: Do not use them.
- As long as your class is rather small (few attributes and methods), local classes are ok yet as soon as they become larger you will loose the overview
(2) Global classes: Do use them.
- Make use of global classes even if they are only used for your training. The big advantage over local classes is that you will get used to the classe builder (SE24) which has a plethora of functions.
(3) Executing global classes: Can be done if you have defined an OO-transaction.
- An OO-transaction has a class and one of its public methods as parameters (similar like report transactions). When you all the OO-transaction an instance of you class is created and the public method is called.
(4) Where and Why use ABAP Objects? Everywhere. Anytime.
- ABAP objects is about stability, maintainability and re-usability of coding. These developer aims can be much more fulfilled using ABAP OO means than in classical programming.
Regards
Uwe
PS: There are situations where local classes are quite appropriate and, using ABAP Unit testing, are obligatory.

Help Page Error: Using XPath expressions as list indexes and map keys

The help page says for maps to use the XPath expression
/process_data/mapvar[@id='/process_data/@stringvar']
But in reality for things to work you have to omit the quotations.

thanks a lot for your help..
there are total 162 records in the v$open_cursor for that user.
among that the open cursor is only 4 and open-recursive cursor is only 6 for that user.
in my session i am executing only the renaming of the constraints and nothing more.
When i have queried the v$open_cursor for cursor_type='OPEN' for all the users, then i got that it has exceeded the value of open_cursors parameter.
So how can i resolve that....

Getting the Object Access key

This weird question,
But does any one know how to get the object access key for Standard SAP object is changed..
Normally when we try to do any modification on Standard SaP object it asks for and access key.. We need to enter it once, after which the object is open for editing.
I have an SAP object which as been modified .
I want to know that number?? Is it possible..
Any help will be highly appreciated..
Regards,
Samir.

Hi Samir,
You have to contact SAP Support to obtain the access key for a Standard SAP Object. The correct channel for that is the OSS, where yo can raise a message requesting the same.
But you are saying that there's one object that has already been modified. Who has done the modification ? When they have done it, they must have specified the access key. If you want to modify the same object, then the best thing for you to do is to contact the person who has changed it.
By the way, have the modifications been done using the Modififcation Assistant?
Regards,
Anand Mandalika.

URGENT - HELP NEEDED WITH ECC 6.0 ACCESS KEY and USER SETUP

Please help me with the two issues:
1) In ECC 6.0, When I go to SE12 , table V-FAGL_ACTIVEC (New GL Activation) to make the table display and maintenance allowed, I am asked for the access key. What is the access key that I am supposed to put here. When I go to DEVACCESS table and put my username, I still dont get the access key.
2) Also I need to know what should be maintained under SU01 to give a user all authorizations. I have SAP_ALL and SAP_NEW. Is there anyother profile need to be given here. Also do I need to give anything under roles tab in order for the user to have all accesses??

OK I have TAR for this:
TAR 4234076.996
and related issue discussed in regards to 500 Internal Server Error described on Neverending frustration with JDeveloper
with the TAR number
TAR 4332393.995
The latter has been demonstrated and confirmed to be a BUG at this point. For the future updates on this issue please refer to
Neverending frustration with JDeveloper

Accessing tab page with shortcut keys

How to access different tabs in a tab canvas using shortcut keys?
dipincha

e.g. you use your oracle terminal and define:
KEY-F0 = Ctrl-0
KEY-F1 = Ctrl-1
KEY-F2 = Ctrl-2
After that you can use the forms-trigger KEY-F0 to -F9.
In the trigger you hardcode e.g.
KEY-F1 : go_item (<Item of first tab>)
KEY-F2 : go_item (<Item of second tab>)
That's it
Gerd

CS6: tab index and access key

Similar Messages

Maybe you are looking for