CS6 trial installation stops at the initial login screen

Hi guys
I am new to photoshop and photography both. I bought a new PC yesterday with 4K LG display. The PC has gigabythe 9600 display card with 2GB RAM on it. Intel i7 quad core cpu 4 GHz, 16 GB RAM, 250 GB SSD, 1 TB HDD 7200 RPM. REst is on the board (lan and all). I have installed win 7 sp1.
Downloaded CS6 and when I start installation it asks whether I want to try or install with a serial. I click on try as I haven't bought it yet. It presents the lic agreement and after that asks me to log in. I click on log on button and it shows the busy circle. After a few minutes of that circle it shows an error saying that either the internet is not connected or the system date is wring. My internet is working fine and the system date and time is also correct. I reinstalled the system 3 times but same thing. It's not even showing the login screen. I tried to install without logging in but then it asks to login after the installation and shows the same error.
The same installation works fine on a different laptop. Have I bought an incompatible machine?
If it doesn't work than I will need to put it on ebay as I have no use of this powerful machine as I don't do any gaming.
Your help is very much appreciated.
Thanks in advance
Shail

Click here and follow the Mac OS X 10.4 instructions even though you're using Mac OS X 10.5.
(48712)

Similar Messages

Photoshop cs6 extended Installation stops at 45% continuously

As it says...
Photoshop cs6 extended Installation stops at 45% continuously.
I have previuosly downloaded and started a trail some days ago...then uninstalled it...now wanting to reinstall it...doesn't work. Stops at 45% and the computer start laging
Anyone knows how to help?

Please run the Adobe Support Advisor - http://www.adobe.com/support/loganalyzer/ to review your installation log.

When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

You can take some of the steps here, #4, #5 or even trying a #18
Step by Step to fix your Mac
but I suspect your going to first have to create a data recovery drive
Create a data recovery, undelete boot drive
to get your data off the machine,
then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
Step by Step to fix your Mac

Why do I get sent to the User Login screen to enter my password after sleep?

Hi,
On OSX Lion, 10.7.4. I recently had to reinstall the OS on a new hard drive in my iMac and now have an issue with it that I never had before.
After prolonged periods of sleep (I haven't determined what the minimum length is before this will happen), when I come to wake the computer it shows me the User Login screen. Under my user icon is an orange checkmark, presumably to show that I am the user logged in. Otherwise it is exactly the same as the User Login screen one gets when the computer boots up. I select my user icon and enter my password and the computer unlocks.
I haven't got this set up anywhere, that I know of. I don't have the 'Security & Privacy - Require password for sleep and screen saver' option checked, never have. If I do turn that on just to check, it's a very different password screen, a little popup window in the centre of the dimmed screen.
How do I turn this feature off?
Thanks,
Owen

Sounds like you may have deleted something you shouldn't have. Boot to an OS X DVD or a bootable backup, and using Disk Utility, do a repair disk, and while there repair permissions. Disconnect any peripherals, and reboot. If you get the same startup behavior, do a safe boot, by holding the shift key down when booting. If that works, try a normal boot. If neither step helps, you may need to relaod your operating system.

Running FF 17 I can no longer see the hotmail login screen. I have tried in safe mode, deleted cache and cookies, etc.

Running any version of FF I cannot see the hotmail login screen. It acts like the page has loaded but it is blank.

Under Web Console I see the following (refreshing doesn't help):
[08:52:44.211] Unknown pseudo-class or pseudo-element '-webkit-scrollbar-button'. Ruleset ignored due to bad selector. @ https://login.live.com/login.srf?wa=wsignin1.0&ct=1354306710&rver=6.1.6206.0&sa=1&ntprob=-1&wp=MBI_SSL_SHARED&wreply=https:%2F%2Fmail.live.com%2F%3Fowa%3D1%26owasuffix%3Dowa%252f&id=64855&snsc=1&cbcxt=mail:6
And
[08:52:44.819] ReferenceError: evt_Login_onload is not defined @ https://login.live.com/login.srf?wa=wsignin1.0&ct=1354306710&rver=6.1.6206.0&sa=1&ntprob=-1&wp=MBI_SSL_SHARED&wreply=https:%2F%2Fmail.live.com%2F%3Fowa%3D1%26owasuffix%3Dowa%252f&id=64855&snsc=1&cbcxt=mail:1

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My Apple password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

Hey Dpcupcake,
If you can not get past the sign in screen on your iPad, you will need to use the steps in this article to recover use of your iPad -
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

Order of the variables in the initial selection screen.

Hi all,
How can I change the order of the variables in the initial selection screen.
Thanks in advance.
Regards,
Kumar.

In the query designer goto query properties screen.. In the first screen you will see the order and you can move up and down the variables there as per your need ..
Regards.

The initial white screen doesn`t appear, but the computer starts normally.

Hi, I'm worried about something. I have a MacBookPro 15 ", and since yesterday when I turn it on, the initial white screen, with the loading bar, doesn`t appear. At first everything is black and then the computer turns on normally.` That is not normal, can anyone help me?

Yes, I normally get this white screen when I turn the machine on. Whithout seen nothing behind it. But now is not appearing anymore. I turn it on > everything goes black (should be white with the apple and the loading bar) > then the screen of the user and password to access the computer appears normally.
What can this be? I searched in the internet, and found nothing. I`m hoping to find the solution here.

I updated my iMac to lion and now when i leave my desktop and it goes into stand by it like a picture is taken of the screen and when i want to log in the mouse point removes pixels so i can get to the user login screen this never happened ith snow leopar

i upgraded my iMac to lion and now when i leave my desktop and it goes into stand by mode, its like a picture is taken of the actice desktop and when i want to log in the mouse point removes pixels so i can get to the user login screen this never happened ith snow leopard. does anyone else experience this and is there a fix?

I have an iMac 8, 1 that I upgraded Leopard to Snow Leopard. It was totally updated with the latest from Apple when I bought and tried installing Lion. The upgrade failed, shot my OS and I couldn't boot. Had the constant spinner on a grey screen.. did a format of the drive, hdd repair and everything came back clean... got back to Snow Leopard and all the updates on it again and then retried the Lion thing... same bs... dead duck. Crashed my system one too many times. I can't see where a few small changes, mostly app related can be classified as an OS upgrade and is not compatible with my iMac. I have the stuff running on my Mac Pro but have yet to notice anything impressive. I've always used F3 and really didn't require Mission Control. Just open you app folder for launch pad... duh? I use the hot corners anyhow. As far as Safari is concerned... as a power user, Apple missed the boat on that for me.. full screen etc.. Wow. I don't like the new Mail either..
As you can see/read, I'm less than impressed with this release from Apple but I own so many of their products that I will have to put up with it for now... somehow the MS logo should apply to this release Steve.

Removing a user name from the Skype login screen o...

Hi, I want to remove a username from the skype login screen on a Samsung Smart TV, but haven't found any way of doing it. I managed to remove a username on a laptop PC by looking up the Skype help but that method doesn't seem to work on the Smart TV - anyone got any suggestions? Thanks

Hi
There is a way of doing this, but it involves resetting ALL of the smarthub back it's default state - which would mean that you would have re-install any other apps that you have downloaded.
To do this, go to the SMART HUB menu and press the TOOLS button on the remote. WHen the menu appears, select the SETTINGS option and then RESET. You'll need to enter your PIN (if set) before you can reset the SMART HUB back to its factory default state. When it's completed, Smart Hub will update itself next time you go back to it, and you'll notice that all of the Skype Names are now removed from the sign in screen.

My mac stops at the white apple screen

my macbook pro stops at the white apple screen and wont move

Which version of OS X are you running? Which model MacBook Pro (e.g., "15-inch Late 2011") do you have?
See -> https://discussions.apple.com/docs/DOC-5431.
Clinton

Suppress the UCM login screen

Hi,
We are going to implement Single Sign On (SSO) using SAML. We can not use UCM login screen.
So Is it possible to Suppress the UCM login screen?
~Hari

Hi
As Kent mentioned with UCM 11g will use WLS security realms for doing all the security authentications .
In case of OAM / SSO (OID 10g case) steps needed were :
1. Create the SSO provider on WLS security realm . For eg if it is 10g SSO then it is SSO Provider and if it is OAM then OAMIdentityAssertor.
2. Create the identity store provider ( like LDAP authenticator , OID Authenticator etc) on WLS security realm .
Both these providers should be set to flag Suffiecient .
SSO provider should be the first in list .
Identity store provider should be second .
DefaultAuthenticator should be set to Sufficient as well so that users from identity store get the right set of security access .
After these 2 steps restart WLS and UCM server . Verify that JPS provider is showing status as good .
Hope this helps .
Thanks
Srinath

Why won't the admin console go past the initial splash screen?

Directory server is version 4.16, console is 4.2. Master server is running under Solaris 8, slave server is running under Solaris 7. Console won't load the directory instance on the Master (a different problem, which is why I'm trying to use a different console). Tried using the console on the slave and I can't get any further than the initial splash screen "Please log in...". Tried using the console on a Red Hat Linux 7.2 machine and I get the exact same result. startconsole -D produces:
/usr/netscape/server4/bin/base/jre/bin/jre -native -ms8m -mx64m -cp .:/usr/netscape/server4/bin/base/jre/lib/rt.jar:/usr/netscape/server4/bin/base/jre/lib/i18n.jar:./swingall.jar:./ssl.zip:./ldapjdk.jar:./base.jar:./mcc42.jar:./mcc42_en.jar:./nmclf42.jar:./nmclf42_en.jar com.netscape.management.client.console.Console -D -A http://noc2.iu13.k12.pa.us:17718
Netscape-Console/4.2 B
RemoteImage: Create RemoteImage cache for sysLoader
startconsole -f log.txt doesn't work - it won't accept -f as an argument.

Kevin Myer wrote:
Directory server is version 4.16, console is 4.2. Master server is
running under Solaris 8, slave server is running under Solaris 7.
Console won't load the directory instance on the Master (a different
problem, which is why I'm trying to use a different console). Tried
using the console on the slave and I can't get any further than the
initial splash screen "Please log in...". Tried using the console on
a Red Hat Linux 7.2 machine and I get the exact same result.
startconsole -D produces:Try using the "-x nologo" option.

Photoshop CS6 trial installation freezes my Macbook Pro

Hey all, a question here for you.
I have a 2.4Ghz Macbook Pro with 4GB or RAM running 10.7.4. Whenever I try to install the Photoshop CS6 (or any other trial for that matter), the install stops halfway through and freezes my computer.
I've made sure that I uninstalled all of my other CS5.5 stuff and even downloaded the Adobe Cleaner to clean my system out. I even went through AppZapper to get rid of all other CS5.5 stuff too and yet this still happens to me.
Any idea what's going on?

Hi Chaps
I had the same issues as most of you I have both a 27'' and a macbook pro 17''.
I Rang adobe support and the only thing I got out of it was being disconnected all of the time.
I had no issues installing on my 27'' but I had freezing on my macbook pro so I read all the ways you tried to install cs6 and this is the method I got ps6 installed.
my config for macbook pro is the icore 7 and 8 gig ram
1. I unistaled photoshop previous versions and any left over folders associated with photoshop I deleted.
2 I went in to disk utility and turned of under preferences ""verify checksum"
3 I put my mac into safeboot mode and I had no issue instaslling ps cs6
4.rebooted my back and turned on verify checksum in disk utility preferences.
I hope this helps you out I have only just converted over to mac so I am not that technical with them yet.
Good luck and looking forward to hearing that what I did helped you
Cheers

Photoshop Cs6 (TRIAL) - Installation failed - Encountered Errors.

Hi, Sorry I don't know if this question has been asked yet, so I'll have to ask.
Everytime I have tried to install the Photoshop CS6 trial, it says that my installation has failed and that it has encountered errors. Below is what my error report says.
Exit Code: 15 -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 1 error(s), 0 warning(s) ERROR: Media DB Error : 12
So, I'm not understanding what the error is.
I know I meet the system requirements because I'm running:
Microsoft Windows 7 (Home Premium)
4 GB RAM
585 GBs of Hard Drive.
It says 86x bit? I think?
I'm pretty sure that I have those met.
Other than that, I'm just not understanding why this isn't working.
Adobe Download Assist is installed just fine.
Hope someone can help!

Did you have the Photoshop Beta installed? If yes, then you need to uninstall that one before you can install the trial.
Does your account have sufficient privileges? If not, you might need to log in as Admin.
Run the install again.
If the error recurs, then run CS Cleaner Tool and remove all products.
Reinstalling after that, should resolve the problem. Get the Cleaner tool here: http://www.adobe.com/support/contact/cscleanertool.html
Let us know how it goes.

CS6 trial installation stops at the initial login screen

Similar Messages

Maybe you are looking for