CS6 Update on Mac OSX failing

I have tried to update my CS6 several time and I keep getting an error. The log is not helping either:
DW CS6 12.1.1 Creative Cloud update
Installation failed. Error Code: U44M1P7

Check this out. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
If same issue, try this. http://helpx.adobe.com/photoshop/kb/photoshop-cs6-updates-dont-install.html

Similar Messages

  • Trying to update from Mac OSX 10.7.2 to 10.7.4 via the Updater.  Update Not Verified?

    Trying to update from Mac OSX 10.7.2 to 10.7.4 via the Updater.   Getting a message half way through the download stating the updated "could not be verified.  It may have been corrupted during downloading."   Any ideas for picking up the latest Update?
    Uploading screenshot....     any advice appreciated.
    Matt

    Either try redownloading or try downloading the standalone updater: OS X Lion Update 10.7.4 (Client Combo).
    Such errors may be caused by glitches in your Internet connection or because of hard drive problems. I suggest you try the following:
    Repair the Hard Drive and Permissions - Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • I updated my Mac osx to the 10.4.7 combo and now I can not start my ibook G

    I updated my mac osx to the new 10.4.7 combo and now my ibook will not restart it goes to the spinning wheel under the apple and stays there and later powers off. I tried going in in single user mode and running fsck because I dont have the utility disk but the reponse i got was- Invalid sibling link (4, 2362) **Volume check failed and a many Incorrect block count for file_____I dont know what else to do please help me.

    Ok thanks I will get the 10.4.6 tomorrow but do I definatley need one of the others they are 100$? Will reinstalling do the trick, maybe.
    I did use my mac while it was updating, im zero at this and it did not warn me and I always use my mac while i downloading things. I also had my isight plugged in maybe that was not good as well.
    Never even thought I had to repair the drive before updating. now i know and knowing is half the battle.
    Do you mean I should back up now with a firewire drive or I should have done so before updating? I tried to access my hard drive through firewire with my sisters ibook but had no luck I followed the direction on the apple pages but I dont know why I couldnt get it.
    What is an erase w/ zero-all 7-way write? Im sorry like I said im zero at this.

  • Update a mac osx 10.3.9 now running on firefox 2.0.0.1 to 4.0?

    How do I update a mac osx 10.3.9 now running on firefox 2.0.0.1 to firefox 4.0 or higher?

    Other browsers that you can look at:
    * http://caminobrowser.org/download/releases/#os10.3.8
    * [http://en.wikipedia.org/wiki/ICab iCab]: http://www.icab.de/
    * http://www.seamonkey-project.org/releases/seamonkey1.1.19

  • Photoshop CS5 crashes when trying to print. I recently updated to Mac OSX Mavericks. Help?

    Photoshop CS5 crashes when trying to print. I recently updated to Mac OSX Mavericks. Help?

    Hi, Chris. Thanks for giving this query a look. I have the same problem. All documents print on my HP Deskjet 932C except Photoshop files since I updated to Mavericks.
    My CS5 version is 9.0 x64. Mavericks is 10.9.4.
    I checked the HP drivers and HP doesn't have one for OS X newer than 10.4.
    I tried printing out the detailed report (very long!) and this page rejected the reply as spam. Can we provide the text as an attachment?

  • How do I install AE CS6 11_LS7 onto MAC OSX Yosemite 10.10.1 since it won't open?

    I am trying to install After Effects CS6 11_LS7 onto MAC OSX Yosemite 10.10.1, but it won't open? I can't find a later download for AE CS6 that may fix this problem. What should I do?

    make sure you downloaded the mac installer, not windows.
    if you're certain you did that, what's the file extension on that file?
    otherwise,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Quicktime 7 Update for MAC OSX

    Where can I find the Quicktime 7 update for mac OSX 10.3.9. When I have followed the link that reads "Quicktime Update For Mac" it goes to a page for the quicktime 7 update for windows instead.WHERE IS THE MAC VERSION UPDATE?????

    Here.
    (-:

  • Does updating to Mac OSX Yosemite delete my photos on iPhoto?

    I want to update to Mac OSX 10.10 from 10.7.5 and I was wondering if my photos on iPhoto would be erased from this process. Also, is there a way to save the photos onto a flash drive?

    Updating OS X will not delete any of your data.
    You should have a (TimeMachine) backup of all your data.
    Copy ~/Pictures/Photo Library to your flash drive.

  • Isight updater with mac osx 10.4...help!

    Hi
    I'm trying to download the updater and i got this error message
    This update does not work with Mac OS X 10.4 or later
    is there anything i can do? ive just worked out that after 6 ipods not working over 3 yrs...technical support have just told me to unplug isight from my imac and the ipod worked! crazy, but to use it while ipod is connected i need to update the software if anyone can pls help?
    thankyou
    sophie

    Hello Sophie,
    Which update are you trying to download? Can you paste a link to it?
    I am confused because your title says "isight updater with mac osx 10.4...help!", but your system info shows that you are using Mac OS X (10.3.8).
    If you have Mac OS X 10.4.x, all needed iSight updaters are installed.
    If you are trying to use iSight simultaneously with a Firewire-connected iPod, the iPod may be inducing a conflict. See the Possible hardware or software conflicts with iSight. FAQ for more info.
    I do not use iPod. You will get better help with your iPod questions at your other post of this same question: my 6th ipod finally works....guess how?!!!

  • I Have mac osx 10.5.8 and have tried to update to mac osx snow leopard 10.6.3, but I constantly get the install failed message. What could be the problem?

    My imac is currently running mac os x 10.5.8. I've tried to install mac osx snow leopard 10.6.3, but have been unsuccesful because the disc fails to install.
    What could be the problem?

    noondaywitch wrote:
    You should boot from the Installer DVD by holding down the C key during start up until the Apple logo and spinning cog wheel appears. Allow plenty of time for the installer to appear - it can take several minutes when booting from a disc.
    I suggest not doing this unless the Apple recommended method (starting by double-clicking on the
    Install Mac OS X icon while booted up normally) fails.
    There are several reasons for this:
    The Apple method performs a check of the DVD's integrity before starting up from it. This can't be done if you start up directly from the DVD.
    The Apple method "phones home" using the current OS's network settings to check for updates to the incompatible items database included on the DVD & writes a lot of pre-install data (the 'Mac OS X Install Data' stuff) to the HD before restarting automatically from the DVD to finish the installation. This may not work as expected if you start up directly from the DVD.
    The pre-install data on the HD speeds up the installation process (because running the OS from the HD to build the data is faster than doing that while running from a DVD).
    The Apple method makes it possible to "gracefully" cancel the installation before the automatic restart occurs without leaving the existing OS on the HD in a corrupted, "half-installed" state unable to restart the Mac. This sometimes happens if the installation process hangs & one has to force-restart the Mac to recover. As long as this occurs during the "pre-install phase" before the restart, the existing OS should remain untouched & intact.
    Also note that the Snow Leopard installer is quite a bit more sophisticated than the previous ones like for Leopard or Tiger. It automatically performs the equivalent of Disk Utility's Verify Disk step before beginning the installation & performs more checks during the installation process (including checking the pre-install data for errors). It is usually not necessary to remove the "Mac OS X Install Data" folder after a failed installation, which may just cause the process to take longer on subsequent attempts, but if nothing else helps it is certainly something worth trying.

  • How do I update to Mac OSX 10.8.4? Not OSX 10.8.5..

    Hi there
    I'm currently running OSX 10.7.5 Lion on my Macbook Pro and need to update to OSX 10.8.4 Mountain Lion specifically
    I intend to coinstall Pro Tools 10.3.7 and latest version of Pro Tools 11 on the machine and from what I can gather on Avid website..
    "The co-install is only supported on OSX 10.8.4.."
    I am ready to purchase and install Mac OSX 10.8 Mountain Lion here on the Apple Store.
    However I am pretty sure this will update my system to 10.8.5 which will not be supported.
    Any advice or methods I could try would be greatly apprectiated..
    From Avid website:
    Pro Tools 10.3.7 and Mac OS X 10.8.4 are supported for co-install with Pro Tools 11.x  (details)Mac OS X: Pro Tools 10.3.7 is qualified with Mac OS X 10.8.4.  For co-install with Pro Tool 11.x, use either Mac OS X 10.8.3 or 10.8.4.
    Thanks
    Tom

    Thanks for the info.
    Unfortunately I don't have an installer file for OS X 10.8.4 ..
    Do you think Apple Support could push that particular update out to machine when I go to purchase?
    Alternatively I could go searching the net for an installer but then I'd have no idea what I was installing was valid.
    Do you know if I installed 10.8.5 is it currently possible to roll back to 10.8.4?
    Tom

  • Update Issue Mac Osx 10:7:5

    Can not instal Mac Osx 10:7:5 update due to.  The volume does not meet the requirements for this update. Help

    Copy these commands into TextEdit, replace the bracketed part with your username and the quoted parts with the ext HD's name, retaining the quotes.
    sudo chflags 0 /Volumes/"name of ext HD"
    sudo chmod a+rx /Volumes/"name of ext HD"
    sudo chown -R <your username w/o brackets>:admin /Volumes/"name of ext HD"
    Launch the Terminal app in /Applications/Utilities, copy and paste the first one into the window that pops up, and hit the return key. When the Password: prompt pops up, carefully type in your admin password, since nothing shows on the screen, and hit the return key. Copy & paste the other two, one at a time, following each with hitting the return key. You won't get the password prompt, since the initial one's good for five minutes.
    Quit the Terminal app and you should be able to read and write to the ext HD. This assumes there's no OS or Time Machine backup on the HD. If there is, don't run the third command.

  • I just updated my Mac OSX to Yosemite. I'm using PS5.1 extended. I've dl'd and installed the Java update, as recommended, but Photoshop still refuses to open. HELP!

    I just updated my Mac OS to Yosemite. Every other program is working fine, but not Photoshop. I've tried everything mentioned in the forums, including updating the JAVA program, a restart and still PS will not open, giving me a "An unexpected and unrecoverable problem has just occurred. Photoshop will now exit." warning.  HELP! I rely very heavily on this program and my attempts to obtain help from Adobe have been utterly futile.

    Reinstall Photoshop CS5 to replace the files damaged by the MacOS 10.10 installer.

  • HT1752 can I update my Mac osx 10.5.8

    Can I update my Mac os x 10.5.8 Leopard to a Mountain Lion

    Not directly, no.
    Before you buy anything, you must first make sure your Mac is compatible.
    For the minimum specs for Snow Leopard read the technical specifications …  Mac OS X v10.6 Snow Leopard
    For the minimum specs for Mountain Lionread the technical specifications. ... Apple - OS X Mountain Lion
    All being well, buy your disc.
    Once you have bought your copy you will need to update via software update or the Combo updater for Snow Leopard … Mac OS X 10.6.8 Update Combo v1.1     Remember to repair permissions both before and after each upgrade/update.
    Once Snow Leopard is installed and updated to 10.6.8 you can then progress to Mountain Lion.
    You can no longer buy Snow Leopard from the Apple retail stores.   If you are in North America ... the last I read, you must call the on-line Apple store at (1-800-MY-APPLE).   It is $29 plus tax for family pack and $19 plus tax for a single.    Otherwise you can call your National Apple Helpline and ask for Sales.    http://support.apple.com/kb/HE57

  • Updating to Mac OSX Lion in Turkey through the USA APP store

    I purchased Mac OSX Lion (because I have a 2009 MBP Pro 4gigs of ram 2.66 core 2 duo) so I could run Adobe Creative Cloud apps. I am currently residing in Turkey until June for study and when I try to download OSX Lion the icon labeled "download" goes from gey to white and a spinning animation appears but nothing happens.
    Is it because I purchased OSX Lion on the USA app store that it will not download in Turkey?

    As long as you are signed into your account in the US store I don't think that it should matter.
    This is almost a 4 GB file that you are downloading. It takes awhile, especially with a slow connection.

Maybe you are looking for

  • Table modification through BDC

    Purpose : There are 5 records in a table zgkmaster er_id   er_name 1        gopi 2        raju 3        priya 4        preeti 5        mahesh I want to make all er_names as 'xxx' .I created excel sheet with xxx xxx xxx xxx xxx Now I want to import th

  • Inserting new line to a text file at position #

    Hi,. Is it possible to do this in java? 1. Open a new text File (woutFile) 2. woutFile.write(" line #1\r\n"); // write new line 3. woutFile.write(" line #2\r\n"); // write new line 4.woutFile.write(" line #3\r\n"); // write new line 5. Go to line #2

  • How to append to the previous line in a text?

    Hi, Can we append a previous line in a text? That is, my program goes to the next line of text in one loop but I need to go back to the previous line and append to it in the next loop. How can I do that? Is there a way to go to a specific line or pre

  • I cant reinstall os x lion 10.7 on my macbook air 2012, it shows negative number on progress bar! pls help thanks

    Hey all, after deleting picture and videos on may macbook air using  IPHOTO i restarted my macbook air and after i open it only shows gray screen and apple logo! tried the following -Disconnect any devices connected to the computer -Reset PRAM -Reset

  • Unable to lanch forms in R12 (getting frm-92050)

    I have installed oracle r12 on rhel5. the ip address of server is 192.168.1.100 i am able to login to oracle apps and see the self service pages in all responsibilities. how ever when i try to open any of the forms i am getting an error FRM-92050 : F