CS6 Version Problems

I installed the CS6 Master Collection (NOT as a trial, it is paid for) on my Mac, but on first launch Photoshop Extended becomes just regular Photoshop. I lose the features of the Extended version. I assume the Master Collection includes the Extended Version, so how come I can only use the Extended Version as a trial?

No, I abandoned the Windows platform long ago. I'm using Mac OS X, 64-bit Intel. All my software is up-to-date as of May 10, 2012 and my computer is in complete working order. I have Photoshop CS5.1 Extended on the same computer as part of CS5.5, it works just fine.
I use Photoshop more than any of the other programs in the Suite, although I use a lot of them, and if I can't get this fixed I'll need to switch between CS5.1 Extended and CS6 to get everything done. I've reinstalled Photoshop twice, and both times it shows up as Extended until I launch it activated. I launched it before activating it the second time I installed it, (the first time separate from the suite) and it worked as Extended then. But once I put in my serial number it switches to the regular version every time.

Similar Messages

  • We have 'CS6' version of Adobe. We are facing a problem with 'Acrobat Pro'. Every month that is stop working and everytime need to install. Kindly help us regarding solving this problem...

    We have 'CS6' version of Adobe. We are facing a problem with 'Acrobat Pro'. Every month that is stop working and everytime need to install. Kindly help us regarding solving this problem...

    Your Acrobat is running in Trial Mode.  Try this KB: Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
    If it doesn't work you need to contact Adobe Support for assistance.

  • Bridge cs5 camera raw 6.5 to 6.5 and new bridge cs6 preview problem

    Hi,
    when i actualize camera raw from 6.5 to 6.6 the preview can`t give me right preview after 1 adjustment in camera raw.Image apears like when we open it in camera raw and it last few seconds with the yellow exclamation mark.
    Months ago the only solution i found after several instals was to turn back to camera raw 6.5.
    Now im trying beta bridge cs6 and problem come back for me again.
    I use Nikon D3x with 14 bits ~49MB .nef files in Windows 7 64 bits.
    Is any one have same problem?And why only in 6.6 (and new camera raw 7.0) and not in 6.5?
    Thanks
    Arménio Teixeira

    Frau S aus B wrote:
    I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?
    The Canon 6D id NOT supported by ACR 6.7.1. It was supported for the very first time in ACR 7.3 whch requires CS6 to run.
    Therefore you will never be able to open raw CR2 files from the 6D directly in CS5.
    If you do not plan on upgrading, you can download the free, stand-alone Adobe DNG Converter 8.3 (always use the latest version, it's not tied to your version of Photoshop at all), install it like any other application and then run it on each batch of CR2 files to convert them to raw DNG files that you can then open in your version of Photoshop and ACR.

  • PHOTOSHOP CS6 PLUGIN PROBLEM; I have PS CS6

    PHOTOSHOP CS6 PLUGIN PROBLEM; I have PS CS6 & a mac osx 10.7.5  I have downloaded the pluginhttps://sourceforge.net/projects/panotools/  I drag it to the applications folder  (applications/photoshop/plugins) and it shows up there, but it does not show up when I reopen photoshop, can anyone tell me if this is a valid plugin or what I am doing wrong?

    Thank you for the link, I don't see where the licensing is listed at all, I also don't see where it says it is for existing CS2 users only & the line install a special version that does not require activation -                                   
    doesn't scream it'd be a problem to load it especially since I already own a later version that I can't use the plugin on - …I don't find the site all that informative.  I appreciate all the answers & responses to my use of CS2 but I'd really just like to receive an answer to the original question of if the plugin works with it or not…if anyone has that answer I'd appreciate it.
    Is there a place I can purchase it?  I will gladly do so if I can get the plugin to work-that is my goal.

  • Cannot download AES 4.5 fopr Flash Builder CS6 version 4.6

    I have Adobe Flash Builder CS6 version 4.6 on my Mac and it start and run fine
    I try to download plug in for it from the Help-Software Update menu. Most plug ins were successfully downloaded and installed, except one from Adobe
    I come across an error dialog that read: Problem Occurred: Contacting Software Sites has encountered a problem. and: No repository found at http://aesplugins.adobe.com/aes/tooling/plugin/10.0
    I have tried to use web browser to go to the address above directly and the result is:
    Object not found!
    The requested URL was not found on this server. If you entered the URL manually please check your spelling and try again.
    If you think this is a server error, please contact the webmaster.
    Error 404
    aesplugins.adobe.com
    Apache
    Help please. How can i fix this problem.
    Regards
    Sanchai Thiewprasertkul
    Bangkok, Thailand

    Ask in the FB forum.
    Mylenium

  • AE CS6 having problems with jagged edges in my render

    I used to compose videos together using After Effects CS4 and the default settings for rendering produced good renders, but after I've upgraded to the CS6 version I notice jagged edges problem in my renders that I didn't have in CS4, and i'm using the default settings in CS6.
    This is a screenshot of a video rendered using CS4 (default render settings):
    This next one is rendered using AE CS6 (default render settings):
    I have looked into the formats that both versions render at and tried to figure out what the difference is. To start off, the available formats given in CS4 seems a lot more different than those in CS6.
    -CS4 rendered in a "Video for Windows" format by default and in Format Options it is Uncompressed, while CS6 doesn't have the "Video for Windows" option at all (and I can't find AVI format for CS4).
    -In CS6 the default format is "AVI", and the Video Codec inside Format Option is "None" by default.
    I'm not sure if this is why CS6 produces jagged edges in its videos. Does anyone know what I can do to render sharper videos in CS6 so i can stop using the CS4 version?
    For example should I maybe change the format from AVI to something else? Change the Video Codec from None to something else?

    Well, straight up: Have you ever bothered to read the AE help? No offense, but this really sounds like "I use the default settings, but otherwise I don't know quite what I'm doing." AVI is cunningly called Video for Windows proper. the rest makes no sense. You are not telling us anything meaningful like comp settings and so on or how you verify your output. The second image simply looks like the hardware scaling in the comp viewer at odd zoom rates and resolutions. Anything beyond that will require a lot more info.
    Mylenium

  • Updates for CS6 version 8 (NOT extended)?

    I can't find updates for CS6 version 8 (NOT extended). There are issues:
    Application Manager needed to be upgraded, done.
    When I open the prog and go to Help>Updates it opens my browser to Adobe, not to updates.
    I have uninstalled and reinstalled the prog.
    Same issue persists, mainly when using poly lasso tool. The prog won't let me make a full selection, it jumps and makes it's own selection.
    What a plethora of problems!!  
    Pls be patient with me as I have a broken brain now, and can't follow complicated instructions like I used to. The simpler, the better! Thanks.

    CS6 version 8 of WHAT?
    Tell me what application you're talking about and I'm move you post there.
    Bob

  • My SSD with a running Dreamweaver CS6 version crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 the error " inconsistency in the installation programm database" (in german terms) occurs. I tried to delete everything concerning t

    My SSD with a running Dreamweaver CS6 version crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 the error " inconsistency in the installation programm database" (in german terms) occurs. I tried to delete everything concerning to CS6, rebootet and so on - nothing worked. Two hours later I tried to install DW 5.5 - that worked. Afterwards I tried again to install 6.0 - without success. Can anybody help?

    Thank you for your answer. I could not find caps.db.
    Meanwhile I solved the problem as follows: I searched for "dreamweaver" everywhere an deleted everything I could find. Then I searched for "CS6" and did the same. I guess there were around 20 or more places where I deleted directorys or files. Suddenly the installation did not stop at 2 % what it always did before and the installation was a success :-) It cost me more than 4 hours to figure that out and I did not find a really helping hint somewhere. Adobe itself I could not contact because I could not find an email adress or a phone number - poor support for such an expensive software. For luck I did not have to deliver something just in time. Lacking a useful support is a really poor, poor attitude of Adobe... I think I will not buy anymore Adobe products - it could cost too much of my time... :-(

  • Falsche cs6 version: windows statt mac

    hi leute, ich habe mir vor 4 wochen die cs6 version online gekauft und heute erst heruntergeladen, dabei musste ich feststellen, dass es eine windowsersion ist, obwohl ich eine für mac benötige. ich habe nun eine rückgabe eingeleitet, ist hier wohl ein problemloser umtausch möglich? vielleicht hatte ja mal jemand ein ähnliches problem?
    viele grüße, oliver

    Order product | Platform, language swap
    Mylenium

  • Can I unistall CS6 versions?

    Can I unistall CS6 versions if I have CC versions on my creative cloud membership? I had AE CS6 when i joined and upgraded to CC when it came out, can I unistall AECS6 without it messing anythinf up? I know that Preimere CS6 is tied to encore and there is no encore CC. So does this mean I have to keep Preimere CS6 if even though I have Preimere CC If I want to keep using Encore.
    Thanks much!
    Twright!

    You can uninstall PrProCS6 and keep only EncoreCS6... but if you ever have an Encore activation problem you will need to RE-install PProCS6 to be able to activate Encore
    Unless you have a space problem, you don't NEED to uninstall PProCS6 for PProCC to run
    http://forums.adobe.com/community/encore?view=discussions
    http://forums.adobe.com/community/premiere?view=discussions

  • CS6: Illustrator und InDesign noch als CS6 Version erhältlich?

    Hallo, ich  hätte da mal eine Frage:
    Vor kurzem hab ich mir die CS6 Photoshop Version zugelegt, da ich es für schulische Zwecke benötige. Das Problem: Ich brauche nun aber auch Illustrator und InDesign für den Unterricht. Besten Falls auch in der Version CS6. Ist das überhaupt noch möglich? Oder muss ich dazu die Cloud Version kaufen?
    Und falls nein, also falls nur noch die Cloud Version erhältlich ist, ist diese dann kompatibel mit der CS6 Version auf unseren Rechnern in der Schule?

    kreativeschirn,
    You can buy CS6 in Educational version, at about a third of the price, see here:
    http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_education_sl_ creativesuite6.edu.html
    It is best to keep things in the same versions.
    When you need multiple applications, a suite will be cheaper. Unfortunately, there is no upsell option from one application to a suite.
    One possibly relevant suite could be the Design Standard ($449 or similar, instead of $1,299 or similar normal price).
    Obviously, you need to prove eligibility.

  • Hallo, ich habe eine Creative Suite master edition CS5. Kann ich diese zu einer CS6 version updaten oder zu einem Creative cloud Abo?

    Hallo, ich habe eine Creative Suite Master edition CS5. Kann ich diese zu einer CS6 version updaten oder zu einem Creative Cloud Abo? Ich finde keine direkt Angabe bei Adobe + Kosten.
    Ausserdem habe ich versucht die heutige Version CS5 zu updaten. Beim download tritt ein Fehler auf. Der Fehler wird nicht genannt, sondern ich werde aufgefordert, um es später nochmals zu probieren. Das habe ich, aber es funktioniert nicht. Kan mir jemand weiter helfen?

    CS6 Upgrade kannst du hier kaufen:
    Creative Suite 6
    Download für deine Programme findedt du unter www.adobe.de - Downloads - Updates

  • How can I open a cc2014 file in my cs6 version of Indesign ?

    How can I open a cc2014 file in my cs6 version of Indesign ?
    I have several files that has been saved in a cc2014 version and I can't open them in my CS6 version of Indesign.
    I don t have access to anyone who have the cc 2014 version to convert the file.
    How can I do it from my cs6 version?
    THANKS!

    You can't do it from CS6.
    You have to export to IDML from InDesign CC2014 (or whatever the version it was created in) and then open the IDML in the earlier versoin of InDesign.
    All explained in the FAQ on the main forum page.

  • I just bought a new Mac and migrated my CS6 over.  Now when I open it, I'm told I'm running a trial version of Cloud.  Why can't I use my CS6 version that I purchased?  I don't want to pay for something I've already bought.

    I just bought a new Mac and migrated my CS6 over.  Now when I open it, I'm told I'm running a trial version of Cloud.  Why can't I use my CS6 version that I purchased?  I don't want to pay for something I've already bought.

    Here's how to convert the Trail to Permanent:
    On receiving Trial/Trial Expired screen
    Make sure that you are online
    Click on license this software
    Perpetual product owners: Log in with adobe ID and enter product serial number
    Product should be licensed successfully

  • A solution for Secure Static Versioning problem in 1.5.0_10

    Hi,
    I have JRE 1.3.1_09 and 1.5.0_10 on my computer and I think I have solved static versioning problem.
    My test computer:
    - Windows XP sp2
    - Internet Explorer 7 (on another computer also IE 6)
    - Firefox 2.0.0.1
    - JRE 1.3.1_09
    - JRE 1.5.0_10
    I. Solution for Internet Explorer 6 and Internet Explorer 7
    1. Edit registry and add:
    HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Deployment\Policy
    DWORD: EnableSecureStaticVersioning = 0 (Hex)
    2. Restart browser if started.
    3. Start web page with java applet.
    II. Solution for Firefox 2.0.0.1:
    1. Install 1.3 JRE in the same parent directory as 1.5 JRE.
    Because default default installation path for 1.5 JRE is C:\Program Files\Java\jre1.5.0_10 you need to modify
    1.3 installation path from default C:\Program Files\JavaSoft\JRE\1.3.1_09 to C:\Program Files\Java\jre1.3.1_09
    After installation check out that "bin" directory is in the following path:
    C:\Program Files\Java\jre1.3.1_09\bin
    2. Install 1.5 JRE in default installation directory: C:\Program Files\Java\jre1.5.0_10.
    After installation check out that "bin" directory is in the following path:
    C:\Program Files\Java\jre1.3.1_09\bin
    3. Restart browser if started.
    4. Start web page with java applet.
    Note: HTML page must use <object> tabs for Internet Explorer or <embed> tabs for any other browser (e.g. Firefox). You need to specify correct classid in object and/or embed tag.
    P.S. If anyone would like to discuss with me send me an e-mail to [email protected], but please post question to forum and just mail me a link to forum. I will write my answer to forum.
    Hope this helps,
    Grofaty

    I have been trying to find a solution for this issue at our organization for over 6 months. Finally, we have a work around to run multiple java versions for newer and aging java apps.
    Thanks,
    Adunlow

Maybe you are looking for

  • Refresh Viz Charts

    Hi, I've a split App and I want to refresh the a viz chart in the detail view by selecting a different item of the master view. My viz chart is built by calling the function showCharts of the detailController. I've tried to refresh the model of the v

  • How can I connect a C prog with diadem

    Hi! I have written a C program, that converts a ASCII File in format what DIADem can read. But now I would like to integrate this C Program in my  DiaDem VBSscript. How can I do this? Could you give some advice or where I can find some information. T

  • Profit center Transfer Prices

    Is it only possible to work with transfer prices when selling goods between profit centers? Is it also possible in case of selling services between profit centers? . Does it require implemetation of the SD module? Thanks is advance, Yael

  • ML Price Analysis CKM3N- 643 versus 645 MT - Grp valuation

    Hi Everyone: Our current system has Group Valuation  and Transfer Pricing with material ledger activated (10 and 31 currency types). While performing testing for intercompany stock transport orders, I noticed that in CKM3N (Material Price Analysis) '

  • Can't see emoji characters in an email

    Hi All, i have always had a weird issue that I hope someone can assist me with... On my iPad and iPhone, when someone uses an emoji character when emailing me (I just tested it with an emoji smiley face)  I can see the emoji character properly render