CS6 Video transitions problem

I am try to add cross fade transitions to a video in CS6. when i drag the any transition to the video, to the end of a clip or the beginning, i do not see the icon to edit the time of the transitions. I have tried to drag a transition between two videos and i do not see the 'side ways triangle shaped" icon on the video.
Please help - thanks

The Premiere forum (or whatever product you are talking about) is your friend.
Mylenium

Similar Messages

Video Transition Problem

I've been using FCE for awhile and I've just recently run into a problem with my video transitions between clips. For some reason my fade in fade out dissolve transition will only go to the second clip rather than bridging itself between both the previous clip and the next. I've got the cursor marked between the two clips and I'm having zero success in figuring this out. Can anyone help?
Thank you!

I do. There's plenty of footage before and after the in and out points. I tried dragging the duration of the transition over to the previous clip and it won't drag. I also tried to increase the duration to the right onto the clip that the partial transition was on to see if I can change it and it wouldn't budge. So there's something going on completely with the video transitions, and unfortunately I'm clueless.

Adobe Premiere Pro CS6 Video Playback Problem/Bug

I have been editing a video for the past few weeks, but recently, after I have been editing for a few minutes, all of a sudden my video won't play in the playback window. When I hit the play button (or the space bar) it does nothing - just sits there. All of the clips are rendered (with the green bar), but I cant see my changes because it doesn't play. I am even able to move the cursor along the timeline and it will show the video in the playback window, but it won't play back in real time. Like I said I have been using Premiere Pro CS6 for a while and havent had this problem until now. Also, when I drag a clip into the preview window, it doesn't play either (but I am able to move the cursor along the timeline). I have to shut down Premiere and open it up again, then it works for a few minutes again, and then the same problem occurs. Please help! The specs for my lap top are as follows: Macbook Pro Retina Display, 2.6 GHZ i7, 16GB RAM, 500GB SSD

Do you ONLY have that single 500gig drive?
If yes, you are below specification... which requires a separate drive for video files
An EXAMPLE concerning trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the
orchestra... this is like Windows pointing to various parts of the hard drive to do
Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct
the orchestra... pick up a bow and play a fiddle... this would be doing something with
your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another
very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition
http://forums.adobe.com/thread/650708 for more on partitions) with Windows (or Mac OS)
and software on your boot drive, and video files on a 2nd drive so the boot drive is
not slowed down by trying to do everything
Do not try to use a USB2 external drive for video editing, the USB2 file transfer speed
is too slow
External eSata or USB3 are both fast enough for video editing... eSata is better -
http://forums.adobe.com/thread/1117813
ONE possibility is this dock http://www.amazon.com/StarTech-SuperSpeed-Docking-Station-Cooling/dp/B0055PL2YI

Creating new website with Fluid Grid Layout in CS6 - CS3 Transitions problem

I am making my second website with Fluid Grid layout and as with my last one, it seems I can't use CS6 transitions. Each time I go to add a new transition, Dreamweaver stops working and shuts down. Should you be able to use the transitions function with CS6 transitions or not? In the end, what I want to do is create a behaviour where one image is swapped with another with a click (not a rollover as it won't work on mobiles, I believe).
Thank you

Add a link to jQuery's Latest Library to your document <head> tags.
<script src="http://code.jquery.com/jquery-latest.min.js"></script>
Add the jQuery function code to <script> tags in your document. I typically put them right above the closing </body> tag.
<script>
$(document).ready(function () {
    $("#one").click(function () {
        $("#one-a").toggle('slow');
    $("#two").click(function () {
        $("#two-a").toggle('slow');
    $("#three").click(function () {
        $("#three-a").toggle('slow');
</script>
</body>
As to why DW is closing you down, I don't know. That's not an expected behavior.
Without seeing your code, I'm going to guess that your CSS transition logic is incorrect or you're attempting to add transitions to the FluidGridLayout.css which is never a good idea. Always use a separate, external style sheet for your manually added content styles. Changes to either boilerplate.css or the temperamental FluidGridLayout.css files can result in problems.
Nancy O.

Premiere Pro CS6 Video Startup Problem

I just updated to Premiere Pro CS6. On one of my systems it would not load because of the following error:
Adobe Premiere Pro Startup Error:
Adobe Premiere Pro could not start any capable video play modules. Please update your video display drivers and start again.
Here are my PC specs (not that beefy but handled CS5.5 fine):
Windows 7 Ultimate 64 bit
Intel Core i7 870 @ 2.93 GHz
16 GB RAM
NVIDIA GeForce 9800 GTX (driver version 296.10)
Anyone else getting this or has a solution?

Nevermind I fixed it. If anyone has the same error, just run as administrator FTW.

Less video transition on premiere pro cc than premiere cs6

hello,
i noticed that there are less video transition on premiere pro cc than premiere cs6...
what's the reason? is there any possibility to import video transition to the pro cc?
many thanks,
ofer

cc_merchant wrote:
It is not hostile, it is drawing attention to the costly handcuffs of Adobe.
pə-ˈtā-(ˌ)tō, pə-ˈtä-(ˌ)tō, ˈardɑpəl
The use of terminology like "handcuffs," "theft-rates," "bondage," "greed" strikes me as hostile. Courtesy Webster online: "a: of or relating to an enemy; b: marked by malevolence: having or showing unfriendly feelings; c: openly opposed or resisting."
I'm a bit stumped by the link you provide. I have not posted to that thread, and the quote you cite is instead from this very thread. Post 12, to be precise. Proceeding on the assumption that the link was simply a mistake on your part but the quote was what you intended to paste, I'd say "the easy way out" would have been to do nothing: let users continue to struggle with the problems caused by the disparity in effects and transitions across platforms. Instead, we opted to address the issue--in the manner we deemed best for the majority of our customers given the realities of deadlines, finite resources, and competing priorities. As it happens, I was directly involved in these decisions. In light of the small number of complaints I've seen in the 7 months since the release of CC2014, I'm comfortable with the choices we made.
But more to the point in light of the point you were attempting to make, I'm utterly baffled at how you think my statement substantiates your hyperbolic assertion that the CC releases of Premiere Pro are untested.
And now back to Oferez307's previously scheduled thread...

Problem with sound, and problem with video transitions

For some reason my audio isnt locked with my video anymore so when I move a clip the audio doesnt follow does anyone know how to fix that?
Also, when I put in video transitions instead of just switching from the first clip to the second clip it flashes an image from other pieces of footage while transitioning and I need to figure out how to fix that too.
Anyone know how to fix these?
thanks

Thanks i got the audio problem fixed.
When I open up final cut it says some of the media has been disconnected but it then says I can't reconnect it or something like that, I don't know if that effects the transitions. I split up a lot of footage and rearranged it and for one of the places where it flashes a clip it shows one of the pieces of footage that I had deleted because it had a glitch and the other places I noticed it it had random clips from throughout the project, like a flash of an interview that happens way later in the film. So it is random clips that are in the film and even clips that I deleted.

I'm having a problem in FCP7 with all video transitions. Every transition has a rolling flicker throughout the effect. What is causing this?

I recently upgraded to FCP7 from FCP6. I am now having an issue in playback with all video transitions. When I add a transition to my video it does not consistently play smoothly. I now appears to have an old "film" like flicker rolling through the effect. Our video was shot on a dslr and brought into FCP with compressor as a prores 422 file. We use magic bullet for our coloring effects which are in place on this video. When I was working on the project in FCP6 I did not have this problem. When the project was complete we upgraded to FCP7. The client has now come back to us wanting additional footage. So I opened the old project up into FCP7 and checked yes to all format updates to meet with FCP7 guidelines. So far this is the only problem I've encountered. Any help would be greatly appreciated.

Hello!
For me it looks like conflict with field order (upper, lower - interlaced).
Please, check Your sequence settings, maybe it should be set to "field order NONE" if Your source is progressive.
Next thing You could check:
in Your timeline with bad transitions look into "Effecs tab" - maybe FCP 7 added "shift field filter +/-1" after opening FCP 6 project.
In general - try to keep sequence settings same as source settings.

Missing video transitions in Premiere CS6

Greeting everyone,
It seems that I am missing some 3D motion transition effects in Premiere CS6. I only have Cube Spin and Flip Over, but I know (and have seen) more transitions on other people's installations. I can't seem to find anywhere to download them either. I assumed they came with base CS6, but I don't have them. Where can I download some more? Or how do I restore the ones that I should have?

Go half way in the link to
Deprecated video transitions
Adobe Premiere Pro Help | New features summary

Video Transitions in Photoshop CS6

Is it possible to add more video transitions (additional to the existing fade transitions) to Photoshop CS6?

We don't have these effects available as drag-and-drop transitions. This could be submitted as a feature request. There are, however, some workarounds if you don't mind going through the steps:
1.) Wipe: Add a layer mask to the video file, fill the mask with black, unlink the mask, then add Layer Mask Position keyframes to move the layer mask across the video in time (you'll have to have a second clip positioned on a separate track and overlapping in time to get the effect). Add a small feather to the mask in the properties panel to taste (you may want to transform the mask, make sure it's unlinked first, to make it a little larger than the image area if you add feathering).
Diagonal wipes are bit trickier: Follow the same steps above but fill only half the mask with black (on a diagonal, polygon lasso can help with this) and you also need a mask that's larger than the image area so you can pan across (use free transform, make sure the mask is unlinked).
Shape Wipes: I believe this is impossible to do easily, because you would need to transform (scale) the layer mask across time, and this isn't available for layer masks (another feature request if you'd like). Technically you could still pull this off, but you would need to synchronize several different layers/layer masks across time and modify each one so that it forms part of the star shape. That's the only way I can think of currently, if you want something like a star wipe...
2.) Blur: There's a few different ways you could do this. Hardest and most accurate: individually blur each frame by incremental amounts (automate for convenience with an action or script). Different but similar effect: Copy the video, convert the copy to a smart object and place directly below the original on a separate track/video group. Blur the smart object (applies to all frames) and then use opacity keyframes on the original (unblurred) video layer to transition between the two.
3.) Lens Flare: Same steps/suggestions as blur, except replace the blur filter with lens flare filter.

Problem with a video transition

I'm new to FCE and just starting to make titles. I made a simple title in Title 3D, saved the clip back to the Browser, and did an Insert Edit to the beginning of the sequence. I then tried to drag a video transition onto the edit point. It took the transition without the "Insufficient content for edit" warning, which I understand having learned about handles. The first video clip is very short, so I want the transition to be entirely within the title clip. What I wind up with is a one frame transition. I double clicked the transition to open it in the Viewer. Trying to increase the duration of the dissolve to 1 sec. doesn't work. It reverts back to 1 frame. I tried moving the Out point back 30 frames but this only shortened the clip by that amount. What am I doing wrong?
Mac OS X (10.4.7)
G4 Dual 867 FCE 3.5 HD 300 GB internal RAID

The Out point of the incoming clip doesn't matter, it's the In point of the clip that matters. If you understand about handles you understand that you need additional media outside and in front of the marked In point of the incoming shot to make the transition. For a one second transition you need at least 15 frames.
http://www.fcpbook.com/Effects1.html

Problems insterting video transitions

Hi all,
I'm luke and new to final cut express. Had a prob today. I couldn't add any video transitions to a clip in the time line. Anyone have an idea as to why this might be happening. I have been able to use this feature with clips in the past.
Hope someone can help.
Cheers luke

http://www.fcpbook.com/Effects1.html

Problem with video transitions folder locked

When I click on the video transitions (in effects tab) and try to drag a video transition like a dissolve into the timeline a small x appears and it wont allow me to add a transition. I noticed the folder symbol next to the video transitions has a lock symbol on it. How do I unlock the video transitions so I can use them again? I've tried clicking on the folder but nothing happens to the lock.

The x you're seeing doesn't mean the folder is locked; it means (usually) that there aren't enough handles on the media to sustain the transition. "Handles" are the frames BEFORE an IN point and AFTER an OUT point that get added to your clip whenever you add a transition. If there aren't enough frames, the transition cannot be applied properly. Look up HANDLES in the manual for more details.
-DH

Encore CS6 Flash Export problem, Grey screens

Hi everyone,
I am having a problem with my encore CS6 flash exports, they are not behaving as expected online (seems to be like a loading issue).
I've tried exporting FLV and F4V and the problem is the same. The same project exported from CS5.5 does not produce this undesirable
problem. It may be important to say that the project was started in CS5.5.
I have a button that links to another menu, and I am using videos as 'transitions'. The videos are dynamic after effects compositions.
When it's online, and you press the button it fills the canvas with a 'grey screen' before starting the video transition. This totally breaks
the experience and feels like an authoring error. It would be important to note, that this screens only appear the first time you see the flash.
Somehow the next time you press it doesnt show it.
I would happily go back to CS5.5 but I started using auto-activate buttons that are only available on CS6 flash exports.
Any ideas what has changed between this versions flash exports?
Any help would be appreciated..
Thanks in advance,
Cris

Encore CS6 6.0.2.004, IE9, Win7
Simple project, DVD NTSC, One menu with one button. One timeline. Menu first play, button linked to timeline.
Output flash with flv (and again with f4v - same results), No template, keep with flash swf rather than streaming.
Open index.html locally, must manually enable active content. Menu opens, movie plays. No grey screen.
Copy entire folder to USB, same result; USB plays on a different PC also.
Upload to web site; same result.
Am I doing soething differently from either of you? Are you using templates?
Factors related to flash security (for local and probably USB playback) can be problems. Various server settings can be problems for on line.

Can't change default video transition duration in PRE7 project

I couldn't find the solution for the following problem. In one of my Premiere Elements 7 projects, suddenly the video transition default duration changed from 30 frames to 3 frames. After inserting this 3 frames long transition, I can adjust it (expanding or shrinking) in the timeline, change the duration via the "Edit Transition" dialog box, however there is no way I can change the default duration. I can change the duration value in the Edit > Preferences > General dialog box but it has no effect on the actual duration. This is true for all transitions. On the other hand, the other projects (I checked a few), also a new project work properly: In them, the default duration is 30 frames, and I can set it in the Properties dialog box to any other value. So, this problem appears to be project specific. I hope somebody can help me, so I do not have to redo this particular project. Thanks in advance, Laci.

Steve, This is the same camcorder I have been using the last five years. Other projects from footages taken the same time are working fine. Also, I just created a 'new' (test) project from the same clips (many clips, about 25 minutes, several bmp pictures in it) - and it also works fine! It must be some very peculiar feature of that particular project, and I do not think it is worth to spend more time with it. I just thought that it might have happened with somebody else and there is a known solution. I consider this issue closed, thanks for the help. Laci. (PS: I also have an insignificant problem: I uploaded my picture to my preferences page here a couple of months ago, set it to be displayed but it does not appear. Who could help with this? Thanks.)

CS6 Video transitions problem

Similar Messages

Maybe you are looking for