CS6 Warp Stabilizer giving me a very small window results

I am beginning to use Warp Stabilizer in CS6 Prem Pro. Just trying to use it on a short 4 minute clip.
I have read the posts of people that have had issues with it running. Mine analyzes fine and completes. However, my result is a very, very small window of video. I am using the default settings which allows up to 150% scaling so not sure why the result is so small.
It almost looks cropped or if it reset the aspect ratio?
FWIW , I think it looks like it "worked", appears smoother. But hard to tell with the narrow viewing window.
Any assistance appreciated.
BJBBJB1

Thanks to all for your insightful comments!! I will definitely try to cut down the length and omit an pans which may be confusing the stabilizer.
I was hoping it would be able to avoid instances of things like that but I I guess that is what causing the results I am seeing. Because I don't think the shaking is so bad you would need half the frame to fix it!
It is just a clip of HDV outdoors, handheld, with some panning, etc. shot with an HV20. Sequence settings match the HDV resolution. I'll cut the panning out and try again.
Good to see other are seeing those results and were able to improve by playing with the parameters.
Thanks again,
BJBBJB1

Similar Messages

Very small window when using Sky Email

When I opened Sky Email with Firefox (on Visat) this morning, there was only a very small window in the top left of the usual space. There were scrolling bars to move about this tiny window but no means of enlarging the window.
I opened the same site with IE and it was OK and full size.

Hello , We have the same issue while opening the form window in UWL, How did you resolve this issue ?

Premiere Pro CS6 - Warp Stabilizer BUG causes project to crash

Hi!
Sometimes Warp Stabilizer causes Premiere CS6 to crash. I found out what steps cause this so hopefully a fix can be made in an update soon:
1) Add the WARP STABILIZER to a clip. It Analyzes and then is applied to the clip.
2) TOGGLE OFF the effect in the effect controls window
3) Adjust the clip duration and RE-ANALYZE while the effect is TOGGLED OFF still and Premiere crashes.
Happens every time. BUG Report was filled out.
(If the effect is toggled ON when you RE-ANALYZE it, everything works okay.)
So why not just not do this? Well, I usually don't but sometimes in the middle of working with hundred of clips I toggle on/off the effect to check certain things and then leave it off. If the clip is adjusted later or I come back and try to click ANALYZE again while the effect is toggled off, everything crashes.
That's the pop up. If Premiere doesn't allow for you to re-analyze a clip while the effect is toggled off, then the ANALYZE button should not be active or at least a popup saying "Cannot Analyze this clip while it is toggled off". Instead Premiere crashes and upon reopening the project you are forced to rename the project which fortunately is usually fully recovered.
Running 6.0.2 on a suped up 2011 27" iMac with 16gb ram and AMD 6970M 2gb video card.

I know I'm piggy-backing on an old post here, but I've just had real issues with a similar thing on Mac. Unfortunately, my Premiere CS6 is crashing and becoming totally unresponsive whenever I simply apply the Warp Stabilizer. The moment I drop it on my clip, BLAM! I get that same pop up you posted. I click 'OK,' and then nothing. Just beachbal of death until I force quit. What's more annoying is that, not only has the camera operator made the stabilizer essential, but I've been using it for the past week with no issues up till now.
At first I thought I was overloading Premiere by dropping the effect onto two clips at the same time. But I tried it one at a time and had the same problem. My recovery project files seem to be ok, but that's not even nearly the point. I simply can not use a great and essential tool. Help?

Premiere Pro CS6 Warp Stabilizer not using GPU/CUDA why?

Hi,
I installed CS6 and tried the Warp Stabilizer, I undestand that only part 2 of the process (stabilize part) is GPU accelerated, but I can't get any acceleration from GPU, my GPU is idle at 1% usage (GTX580) and all the processing is going to CPU. The renderer/playback is marked CUDA so its not that.
Is there anything I'm missing?
Thanks

OK, this surprised me a bit. I have a state-of-the-art new PC with plenty of RAM, a fast processor and lots of cuda cores. See the specs here: http://www.stevengotz.com/
It took over 10 minutes to stabilize one minute of video - 1800 frames. It wasn't all that shaky to begin with, but it was handheld and therefore looks better after using Warp. There was one section that was so bad, I sliced the clip up and chose not to stabilize that part after the fact. So I thought that it might have added a little to the problem. But no. I tried just 180 frames of reasonably stable hand held video from the same clip and it took almost a minute.
Now, once the process was finished, I had no problem playing it back in realtime without rendering. But what is taking so long? I understand that there is a lot of work to do, but why isn't it using the power I have provided?
This is a screen shot of my resources about two minutes into the process.
I would love to know what I need to do to speed up this process. I get that it is working in the background. Is it possible to make it work in the foreground? I would not mind if it maxed out the RAM or the CPU or both if it would help.
edit: I just submitted a Feature Request to let Warp run in the foreground using every available resource.
Steven
Message was edited by: Steven L. Gotz to include additional information.

My home page and facebook games open with a very small window. The print is extremely small. How do I change the size of windows and print?

Even when I click on full size in my games on Facebook, the windows are not as large as they were in Internet Explorer and the print size is very small. I had changed the size of the print in IE, but don't know how to change it in Firefox. The same is true for my homepage.

See this:
https://support.mozilla.com/en-US/kb/Page+Zoom

Why does Safari now open up in a very small window

Why does Safari now open up in a very small window

Drag the bottom right corner of the Safari window to fit the size you prefer.
Best.

Premiere Pro CC 2014 - warp stabilizer

Within the last couple of days, I have been dragged, kicking and screaming, into the world of Creative Cloud! I have pre-paid for the first year and, so far, am not convinced I have done the right thing. I have been running CS6 with very good results for some time and was looking forward to the new facilities and options in CC 2014.
So, I have read in another discussion, that Premiere Pro is not backwards compatible. Surely this cannot be true?
My first use was to load a (copy) project I had been working on for some time. Source files were AVCHD (.mts as imported) 1920x1080. The performance in timeline playback is sluggish, where CS6 had been very smooth. Then it met a clip which had the CS6 Warp Stabilizer applied. In CS6 it was very effective. In CC 2014 it just showed a black screen with just a small area of picture visible in the top rleft hand corner. It needed rendering and that suggested it was going to take 30-35 minutes to render a single (approx 20sec) shot!
So, if the program is NOT backwards compatible, I create a brand new project. I imported a few clips (AVCHD - .mts extension). I placed one of them on the timeline - having first dragged one of the clips to 'new item' to set up the parameters for the project. I dragged the warp stabilizer on to the clip, leaving the Warp controls in default. It did exactly the same thing, a black screen and just a small portion of the picture in the top left hand corner.
Please, somebody assure me that I have not just spent over £300 on software which is going to slow me down and make life far more difficult than it was before.
PC/Windows 8.1/8Gb RAM/Intel i5

With profoundest apologies, I have found the answer in another discussion concerning Warp Stabilizer.
I was so anxious to get up to speed with CC2014 that I failed to search properly.
Alan S.

IPhone 6Plus on every reboot after putting in my password it opens to a small window asking for apple id password

everything works on phone and wow it's big compared to my iPhone 5s. went with space grey since i have had 3 white phones in a row. restored via iCloud backup. updated iTunes as i have about 3,000 songs. 250 bought the rest ripped to AAC from my cc's....what a pain but switched from my windows desktop to this new rMBP late 2013 for xmas and iTunes is slightly different on a mac than windows and where everything is stored on drive.
anyhow problem is every time i reboot after putting in my password and arriving at whatever page i left at i get a very small window asking for my Apple id password. Now the top half is pre filled in with the email address i use for iCloud/itunes/apple/etc.
i did see in settings there is a checkmark i cannot remove that says for apple password "ask immediately" there are no other choices. it can't be unchecked by any method i found.
any help appreciated.

In case anyone else gets this I hit cancel once and it has never come back.

Finder opens small window

Every time I open the Finder, it opens in a very small window which I then have to widen. I close it, re-open it, and it's the small window again. Every time.
Is there any way to get the Finder to open in a larger window, the size I closed it in?

Roger Barre,
If its only one folder, You could try trashing the hidden file ( .DS_Store ) inside the folder that stores some of its positioning and size settings.
To show your hidden files.
Launch ( Terminal ) > Paste in the following ( defaults write com.apple.finder AppleShowAllFiles -boolean true ; killall Finder ) > Press Return.
Open the ( Offending Folder ) > Delete ( .DS_Store ) > Restart > Resize folder how you want to to stay > Restart > Does it stay?
To reverse your hidden files back to hidden.
Launch ( Terminal ) > Paste in the following ( defaults write com.apple.finder AppleShowAllFiles -boolean false ; killall Finder ) > Press Return.
or You could trash all the hidden ( .DS_Store ) files on your Mac. If its multiple folders in Finder.
Launch ( Terminal ) > Paste in the following ( sudo find / -name ".DS_Store" -delete ) > Press Return. > Type in your administrator password. It will look like it isn't typing when you type in your password. Also it won't look like it is doing anything for awhile while it is running please be patient. It probably will tell you that /dev/... and /dev/... are not a directory, this is ok > Restart your Mac. Don't just log off then back on. > After your Mac restarts change the view settings the way you would like and test to see if it remembers them.
This command will delete all the .DS_Store files on your Mac so any positioning and sizing set in all Finder windows will have to be reset. Also its a good idea to repair your disk permissions afterwards.
Hope that helps,
westongallagher

Firefox is starting in a small window, and won't even run no matter what. Help?

Okay, long story short, I accidentally downloaded some viruses. We got them removed (me and my father), but now, Firefox won't start! Well, it does, but it opens in a very small window, doesn't have the logo, and can't do anything but shrink. Please note, that not even Internet Explorer/Exploder could connect to the internet, so I'm using another computer.
Best of luck,
Red (My nickname).

When you start Firefox, normally there is a thumbnail of your startup page above the Firefox button on the Windows 7/Windows 8 Task bar. Is that all you see, the actual window is nowhere to be found?
'''''Thumbnail Only'''''
Sometimes the Firefox window gets off-screen. If you have a multiple monitor setup, make sure both monitors are on. Other users have reported that sometimes Firefox behaves strangely when the second monitor is off.
In all other cases: Sometimes the Firefox window gets "off screen" somehow. You often can force it to appear on the screen by right-clicking the little thumbnail image above the Taskbar and choosing Maximize. Does that work?
One possible cause for this is that the file which stores window sizes and positions has become corrupted.
'''Method #1:''' ''If you can get a maximized window:''
Open your current Firefox settings (AKA Firefox profile) folder using either
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button. This should launch a new window listing various files and folders in Windows Explorer.
Leaving that window open, switch back to Firefox and Exit, either:
* "3-bar" menu button > "power" button
* (menu bar) File > Exit
Pause while Firefox finishes its cleanup, then rename '''xulstore.json''' to something like xulstore.old. If you see a file named localstore.rdf, rename that one to localstore.old as well.
Start Firefox back up again. Do windows display normally again?
'''Method #2:''' ''If you cannot get a Firefox window at all:''
Shut down Firefox by right-clicking the taskbar icon > Close All Windows.
Using the Run dialog (windows key + R) or the Start menu search bar (or in Windows 8 maybe the charms bar search bar?) type or paste the following and press Enter to drill down to the Profiles folder:
%APPDATA%\Mozilla\Firefox\Profiles
Here you may see one folder -- in which case, double-click into that -- or more than one folder -- in which case, double-click into what looks like the most recently updated.
Scroll down and rename '''xulstore.json''' to something like xulstore.old. If you see a file named localstore.rdf, rename that one to localstore.old as well.
Start Firefox back up again. Do windows display normally again?
'''''Broken Window'''''
If you get an actual Firefox window with missing features, try launching a new window using Ctrl+n. Also, try double-clicking the top bar to maximize the window. If neither works, please try the steps above for the Thumbnail problem.

Firefox turns into small window when drag it or minimized

It was working perfectly and now when I want to drag it the browser becomes a very small window. The same happens if I click minimize or the other "medium size " command whatever t'call.
Tried restarting, closing and reopening and nothign has changed.

It's a problem with Windows 8 if you are using any pre-release version or try to reset Firefox!
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Warp Stabilizer through After Effects Dynamic Link Locks up in CS6

Hey Gang,
I've been using Warp Stabilizer through dynamic link in CS5.5 without issues. However, when I go through dynamic link into AE, then apply Warp Stabilizer, AE locks up?
I can apply any other effects through this path in AE without issue, but when I try to apply WS, I get the "Analyze", but AE stops cold there.
I've tried:
-Opening new project in PP with basic 5 second clip. Then going through dynamic link into AE, and applying warp stabilizer first thing. AE locks up there with the simplest flow.
-I have the latest downloads of the entire production CS6 suite.
-If I apply warp stabilizer directly in Premiere CS6 (which I did not know previously I could do), it works fine! (Just noticed Warp Stabilizer is present in PP CS6, but not in CS5.5).
-If I try to import the Premiere project from AE, AE locks up doing that?
It appears there are multiple issues here:
1. I can't apply Warp Stabilizer in After Effects, and doing so crashes AE.
2. I can't import a Premiere project into After Effects, and doing so crashes AE too?
I'm assuming I'm going to need to download AE again?
Thank you for any help and suggestions you may have!
Derek...
Message was edited by: Derek Emmett

Hello Mylenium,
thank you for your input. Naturally I would expect if my work flow in CS5.5 works great, I would not have to make any changes in CS6 to accomplish the same task. With that said, I made it as simple as possible for CS6 AE to handle the Warp Stabilizer effect, and it crashed? If I went directly back to CS5.5, no problems at all in AE (same source footage, but of course different projects). When I first tried CS6 AE it appeared to work fine, even when doing Warp effects. So when I ran into the issue I saw above, I started thinking it was possible the update I did to AE may have caused some other issue. By the way, the projects I open in both CS5.5 vs. CS6 were independent, meaning, I did not convert a CS5.5 job to CS6, etc... (See notes below).
My setup is standard:
i7 960
16G mem
Nvidia Quadro 4k
Footage is Canon 5D Mkii 1080p
All drivers up to date.
-I think going back and forth between CS5.5 and CS6 may have caused some issues? When I rebooted my system, CS6 AE seems to work fine when applying Warp Stabilizer effects again.
-What I did find more interesting and effective, was that CS6 Premiere has Warp Stabilizer right in its own effects now! Works great in the premiere flow and plays back far better then going through the Dynamic Link with After Effects! When playing Dynamic link effects back in Premiere, I'm sure everyone sees performance issues in the playback. However, in at least with applying Warp Stabilizer directly in Premiere, the playback performance is much better.
Thank you
Derek...

Warp Stabilizer in CS6 does not work at all

When using the CS6 Premiere Pro Warp stabilizer it starts to analyze but doesn't start to convert after it has finished analyzing.
- Add the Warp Stabilizer
- Blue bar over picture shows up "Analyzing in Background (Part1 of 2)
- Prozess finishes but nothing happens (Source does not get corrected, orange bar never shows up)
- Another blue bar shows "Click Analyze to begin"
When pressing Analyze the process starts over again without any result.
The used footage is some mxf from a Canon C300
The used PC gots 8 cores, 32GB Memory
Update:
When using a different Clip, or if i shorten the problematic clip, it seems to work now
Info to problematic clip:
File Path: xxx.MXF
Type: XDCAM-HD Movie
File Size: 44.5 MB
Image Size: 1920 x 1080
Frame Rate: 25.00
Source Audio Format: 48000 Hz - 16 bit - Mono
Project Audio Format: 48000 Hz - 32 bit floating point - Mono
Total Duration: 00:00:07:05
Pixel Aspect Ratio: 1.0
Compression Type: MPEG 4:2:2

I could not help laughing at Jim's remark. I remember showing my 20 minute video of our trip to Italy to my brothers way back in 2002. In fact, it was my first Premiere project. I had the sense to cut it way down from 20 one hour tapes to 20 minutes. My oldest brother may have thought he was being a little insulting with his remark, but I was overjoyed. He said "It looks like a PBS travelogue." That was, of course, exactly what I was going for with the video and the voiceover.
In any case, I was able to use Warp Stabilizer this weekend on some footage of a children's birthday party. I can't show the results because of the subject matter. Not that they were doing anything wrong other than savagely beating a poor Super Mario Brother's pinata, but I don't have a release for them all.
I was a bit surprised at how long it took. I have a state of the art PC, and apparently the GPU doesn't help. I liked the results, but I sure would like to know what resources the effect utilizes. This is a screenshot of what it looked like about two minutes into the 11 minute process (the effect window estimated 8 minutes) for stabilizing a 60 second video (1800 frames). I think maybe I will start another thread to inquire about this. The CPU wasn't even breathing hard, the hard drives I am using for cache are in RAID0 - so should be reasonably fast. Hmmm. I wonder?

OpenCL warp stabilizer renders in a small box in the top left corner

Hi everyone,
I have just built a new computer with the following specs:
Premiere 8.1.0 (81) build
i7 4790s haswell-refresh,
16gb Corsair RAM (4x4 DDR3 1600),
Gigabyte Z97MX Gaming 5
2x A-Data SP920 128gb SSD
Sapphire Radeon HD 7750
Windows 8.1 Pro CZ
Now I know this is a very weak configuration compared to other builds here, but I had hoped it would work fine for my amateur Full-HD workflow of clips mostly under 30mins.
The problem is; when I enable OpenCL acceleration, then all clips with warp stabilizer become about 1/4 of the preview window; it carries over to the final render. I have tried this both with the AMD card and without it (having OpenCL enabled with the Intel HD4600). No avail.
Now the funny part is that I used to have this same card running in my previous system; running on an obsolete Gigabyte UD3 with Core i5 750 in it and... IT WORKED! It was with the same Premiere version, running on the same OS. I've ditched that computer just a few days ago, but my new computer has this inexplainable problem.
The build is not the issue, as I had the computer tested and everything is stable with decent temperatures.
I am also having quite a lot of crashes while editing, but I think that's due to the infamous RedGiant suite which as I read on the forums is likely to blame. It's ok, i just need to save often. Would Neat Video be better? Does anybody know?
Another problem is the sluggishnes and lags when my clip reaches beyond 30 mins; I don't think that's ok, my videos produced with EOS M should not be anything demanding for this setup; when I monitor the ram usage, it never gets above 8gb (and yes, I have allowed CC to use up to 13gb of the total ram); also other resources are almost idle during editing.
The sluggishnes and lag is however even worse in SpeedGrade; over there when I move any slider, I need to wait for seconds! It somehow improves over time, but again, I just have an opinion now that this software suite is very very badly made. I am happy I am not using this to make money...
Please correct me if I'm wrong and any links that could help me resolve the problems are super-welcome.
regards,
Jan

Thanks for the report. We believe we have identified the issue and are working on a fix. For now the workaround is rendering in Software mode.
Best,
Peter Garaway
Adobe
Premiere Pro

Is there a warp stabilizer or video stabilizer plug-in for cs6 ?

is there a warp stabilizer or video stabilizer plug-in for cs6 ?

For Acrobat Pro? I don't really understand. You don't typically *edit* PDFs in a browser.
Note that Acrobat Reader is totally unnecessary on OS X. I'd recommend avoiding it. If you are creating PDFs, or doing advanced features that make it worth spending hundreds of dollars, then Acrobat Pro may make sense, but otherwise, just use Preview.

CS6 Warp Stabilizer giving me a very small window results

Similar Messages

Maybe you are looking for