CS6 Which Preset to Use for Viewing on a Windows 7  Computer

I'm using CS6 on Windows 7 and have .mts files that are approximately 35-40 minutes each. I need to get these to someone else so they can view them on a Windows 7 machine. The original files are 1440x1080. I thought if I exported them using the AVI preset it wouild knock the size down considerably (I have to upload these to an FTP site so they really should be fairly small file sizes). Unfortunately, it's only about 1/5 of the way through the first file (approximately 7-8 minutes) using Media Encoder and the file is already 1.5GBs! I'm not sure what I'm doing wrong. Can anyone point me in the right direction? I need to get these out today!
Thanks,
Lloyd

Harm,
EXACTLY! That's the plan. She was actually here two weeks but training only took place the first four days. I have to edit out all the dead air, mistakes, and anything not specifically related to the training, then add a few dozen computer screen shots and create the finished product, which will probably sit on a shelf and never be looked at again    .
Thanks,
Lloyd

Similar Messages

  • I have a licence code for Adobe CS6 Master Collection which I'm using for more  than a year, suddeny I am in trial mode (all programs)  an it seems that this code is not accepted anymore. Help needed!!

    I have a licence code for Adobe CS6 Master Collection which I'm using for more  than a year, suddeny I am in trial mode (all programs)  an it seems that this code is not accepted anymore. Help needed!!

    Chat Now button near the bottom for Activation and Deactivation problems may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • Which method is used for event creation

    Dear All,
    My client has more then one Purchase Organization. Workflow for Purchase order release very from pur org to pur org. For example - workflow WS92000030 is trigger when PO is created for India pur org where as workflow WS92000021 is trigger when PO is created for US pur org.  
    I checked and found that same Object Type - BUS2012 & event - RELEASESTEPCREATED is used in all Pur. Org PO release workflow. Also I found in Transaction code - SWETYP that Type linkage activate for  BUS2012, RELEASESTEPCREATED in all the PO workflow - WS92000030 & WS92000021.
    As per my knowledge, event can be created in various way such as Function module, Change document, General status management, Business Transaction Events etc.
    Can some one guide me, how can I found that which method is used for event creation in different pur org?
    How can I fould what is the fuctional module used for event creation if Fuctional module used for event creation. 
    For your information, I can see in T. Code - SWUO that 'Result dependent on a check function module'  for all the workflow - WS92000030, WS92000021 etc.
    Thanks in

    Hi Sahu,
    I dont think they have used the Function module or change document or any other kind of methods to trigger the workflow. This is because RELEASESTEPCREATED method is a standard method and it will be triggered by standard SAP. They can not make changes in standard sap saying RELEASESTEPCREATED should be triggered for this Purchase Org .
    Istead what i think is, they might have given the Event Condition for each workflow.
    In SWDD>> basic settings>> Start Events, we can give condition on triggering the workflow.
    Please check this.
    Regards,
    Gautham

  • Which CKM is used for moving data from Oracle to delimited file ?

    Hi All
    Please let me know Which CKM is used for moving data from Oracle to delimited file ?
    Also is there need of defining each columns before hand in target datastore. Cant ODI take it from the oracle table itself ?

    Addy,
    A CKM is a Check KM which is used to validate data and log errors. It is not going to assist you in data movement. You will need an LKM SQL to File append as answered in another thread.
    Assuming that you have a one to one mapping, to make things simpler you can duplicate the Oracle based model and create a file based model. This will take all the column definitions from the Oracle based model.
    Alternatively, you can also use an ODI tool odiSQLUnload to dump the data to a file
    HTH

  • How to specify which cert to use for software virt server?

    Is there a way to specify which certificate to use for each software virtual server? So, for example a user hitting https://somewhere.com would get the certificate for somewhere.com while the virtual server https://somewhereelse.com would use the certifcate with the name somewhereelse.com in it?

    No, this is not possible due to limitations of the underlying protocols.
    HTTP requests are sent over TCP connections which deal with IP addresses and port numbers (i.e. hardware virtual server properties), not hostnames (i.e. software virtual server properties). The HTTP protocol adds software virtual server support by allowing a client to identify the hostname (e.g. "www.iplanet.com") of the server it wishes to communicate with. This is achieved by including a "Host:" header with each HTTP request.
    Unfortunately, the SSL/TLS protocols require that the web server present its SSL/TLS certificate BEFORE the client sends its HTTP request. Since the software virtual server information is contained in the HTTP request, it is not possible for the server to select different certificates for different software virtual servers.
    You will need to use hardware virtual servers (i.e. virtual servers that have different IP addresses and/or port numbers) if you wish to use distinct SSL/TLS certificates.

  • After reopening Firefox does not remember which desktop was used for each window. Can you help, please.

    I'm using two displays and several desktops on my Mac (OS X 10.9.4).
    When I need to restart Firefox, it remembers to open windows from last session in correct display, but does not remember which desktop was used for each window. So when the application starts, it opens all windows on a desktop which is currently active instead of reopening them on desktops used during the last session. How to fix the issue?

    Hi Nerva,
    Thank you for your question, there is a add on I have been recommended to custom set up of opening windows in new monitors. It's called [https://addons.mozilla.org/en-US/firefox/addon/monitor-master/ Monitor Master].
    However, in regards to the session remembering which monitor the window was open in, in the profile folder there is a file that stores window positions and dimensions. It is called localstore.rdf.
    Please stay tuned for more investigation, as there are definitely bugs on file for similar issues. Pinpointing it is the hard part.

  • HT1918 I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

    I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

    JarleEkanger wrote:
    How about this? Use Delete array subset to extract chunks for averaging, and a shift register to retain the remaining array.
    It is typically not advisable to use "delete from array" in a tight loop. The constant memory reallocations due to array resizing are probably inefficient.
    Here's one simple way to do it..
    (If the number of points is not divisible by 10, the excess tail is discarded. You can easily modify that behavior if desired.)
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    averages of 10.png ‏5 KB
    averages of 10.vi ‏9 KB

  • How to change the parameter 'Default Servers To Use For Viewing And Modification' using java api dynamically.

    Hi,
    I need to change the Crystal Reports setting 'Default Servers To Use For Viewing And Modification' to a particular server.this i need to do using java api.
    could you pls provide me the sample code for this.
    Regards
    Srinivas

    The IReport interface extends IViewingServerGroupInfo interface, that allows you to specify the server group. 
    The choice selection for that interface is as follows:  0 = first available, 1 = prefer the selected server group, and 2 =  only use the selected server group.
    The server group selection is by the SI_ID for that server group InfoObject.
    Sincerely,
    Ted Ueda - Developer Support

  • Which cable should use for Sony DV connect to iMac ?

    Which cable should use for Sony DV(IEEE 1394)connect to iMac ?

    If your iMac has just the FireWire 800 connection, you will need the 9 pin to 4 pin cable.
    http://www.cwol.com/firewire/firewire-800-1394b-cables.htm
    If your iMac has the FireWire 400 connection, you will need the 6 pin to 4 pin cable.
    http://www.radtech.us/Products/ProCableFW400800.aspx
    Links are to illustrate examples. You should be able to pick them up at most computer stores.

  • I have a Comcast system and am going through a Bose amp for sound.  The comcast box has an HDMI port which I've used for the Apple TV connection.  Nothing works! Help.

    have a Comcast system and am going through a Bose amp for sound.  The comcast box has an HDMI port which I've used for the Apple TV connection.  Nothing works! Help.

    Thanks.  Thought that would be the solution but for my wall mounted TV it's going to be a problem but many thanks for your reply.....

  • Elements 7 - Best Preset to use for the Panasonic SDR-H40 Camcorder

    Hi,
    Can anyone tell me what would be the best preset to use for video created on the Panasonic SDR-H40? I'm just learning about the software, opened a project, using whatever settings were already there, and the video's audio sometimes stops mid-stream, so it's basically a silent movie.
    I read that I might need to use a specific preset or create one of my own, but don't know how to actually go about it.
    The choices under NTSC presets are AVCHD, DV or HDV. I've looked in the Camcorders manual and can't find how (or even if) that equates to the recording modes of XP (high picture quality), SP (normal) or LP (recording time prioritized) -
    The videos I recorded were recorded in XP - Taking a guess at it, I don't think there's a relationship between these terms and the recording modes of the Camcorder and suspect that this camera only does DV. But if that's true I don't know if there are further adjustments I need to make (by creating a preset).
    I was hoping that someone with the same camera or just solid general knowledge could shed some light on this.
    Thanks!

    The camcorder is a standard definintion camorder recording to a hard drive so you need to use the.... NTSC, "Hard disc, Flash Memory Camcorder", Standard 28KHz or Widescreen 48KHz dependant on whether you shot in widescreen.

  • Which function is used for  adding days to given month

    which function is used for  adding days to given month

    Hi Jagrut,
    Good ... Check out the following examples
    <b>Get a date</b>
    DATE_GET_WEEK Returns week for a date
    WEEK_GET_FIRST_DAY Returns first day for a week
    RP_LAST_DAY_OF_MONTHS Returns last day of month
    FIRST_DAY_IN_PERIOD_GET Get first day of a period
    LAST_DAY_IN_PERIOD_GET Get last day of a period
    RP_LAST_DAY_OF_MONTHS Determine last day of month
    <b>Date calculations</b>
    DATE_COMPUTE_DAY Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
    DATE_IN_FUTURE Calculate a date N days in the future.
    RP_CALC_DATE_IN_INTERVAL Add days/months to a date
    RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
    SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
    MONTH_PLUS_DETERMINE Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
    DATE_CREATE Calculates a date from the input parameters:
    Example: DATE_CREATE
    CALL FUNCTION 'DATE_CREATE'
    EXPORTING
       anzahl_jahre  = 1
       anzahl_monate = 2
       anzahl_tage   = 3
       datum_ein     = '20010101'
    IMPORTING
       datum_aus     = l_new_date.
       Result:
       l_new_date = 20020304
    Example: MONTH_PLUS_DETERMINE
    data: new_date type d.
    CALL FUNCTION 'MONTH_PLUS_DETERMINE'
    EXPORTING
    months = -5 " Negative to subtract from old date, positive to add
    olddate = sy-datum
    IMPORTING
    NEWDATE = new_date.
    write: / new_date.
    <b>Hollidays</b>
    HOLIDAY_GET Provides a table of all the holidays based upon a Factory Calendar &/ Holiday Calendar.
    HOLIDAY_CHECK_AND_GET_INFO Useful for determining whether or not a date is a holiday. Give the function a date, and a holiday calendar, and you can determine if the
    date is a holiday by checking the parameter HOLIDAY_FOUND.
    Example: HOLIDAY_CHECK_AND_GET_INFO
    data: ld_date                 like scal-datum  default sy-datum,
          lc_holiday_cal_id       like scal-hcalid default 'CA',
          ltab_holiday_attributes like thol occurs 0 with header line,
          lc_holiday_found        like scal-indicator.
    CALL FUNCTION 'HOLIDAY_CHECK_AND_GET_INFO'
      EXPORTING
        date                               = ld_date
        holiday_calendar_id                = lc_holiday_cal_id
        WITH_HOLIDAY_ATTRIBUTES            = 'X'
      IMPORTING
        HOLIDAY_FOUND                      = lc_holiday_found
      tables
        holiday_attributes                 = ltab_holiday_attributes
      EXCEPTIONS
        CALENDAR_BUFFER_NOT_LOADABLE       = 1
        DATE_AFTER_RANGE                   = 2
        DATE_BEFORE_RANGE                  = 3
        DATE_INVALID                       = 4
        HOLIDAY_CALENDAR_ID_MISSING        = 5
        HOLIDAY_CALENDAR_NOT_FOUND         = 6
        OTHERS                             = 7.
    if sy-subrc = 0 and
       lc_holiday_found = 'X'.
      write: / ld_date, 'is a holiday'.
    else.
      write: / ld_date, 'is not a holiday, or there was an error calling the function'.
    endif.
    Checking dates
    DATE_CHECK_PLAUSIBILITY Check to see if a date is in a valid format for SAP. Works well when validating dates being passed in from other systems.
    Converting dates
    DATE_CONV_EXT_TO_INT Conversion of dates to SAP internal format e.g. '28.03.2000' -> 20000328 Can also be used to check if a date is valid ( sy-subrc <> 0 )
    Function to return literal for month
    he table you want to use is T247. You can also use the function MONTH_NAMES_GET.
    You can also try table T015M. It has the month number in it's key.
    Formatting
    DATUMSAUFBEREITUNG Format date as the user settings
    Other
    MONTH_NAMES_GET It returns all the month and names in repective language.
    Good Luck and thanks
    AK

  • Is there a custom function available which can be used for logging errors captured in a sp in a sql table

    Is there a custom function  available which can be used for logging errors captured in a sp during and after execution in a sql table?
    Basically we  would like to utilize such function  in every sp and log errors of each sp in a error log table
    Mudassar

    Thanks .
    I was able to write this however I am thinking I am missing something
    CREATE FUNCTION testfunction1()
    RETURNS @temp_error TABLE (
    id int identity(1,1),
    procedure_name varchar(255),
    line_number int,
    error_number int,
    error_message varchar(max),
    error_state int,
    error_severity int,
    occurence_datetime datetime default current_timestamp,
    user_name sysname default suser_name(),
    login_name sysname default suser_name()
    AS
    BEGIN
    insert @temp_error(procedure_name,line_number,error_number,error_message,error_state,error_severity)
    select error_procedure(),error_line(),error_number(),error_message(),error_state(),error_severity()
    RETURN;
    END;
    CREATE TYPE test_type AS TABLE(
    id int identity(1,1),
    procedure_name varchar(255),
    line_number int,
    error_number int,
    error_message varchar(max),
    error_state int,
    error_severity int,
    occurence_datetime datetime default current_timestamp,
    user_name sysname default suser_name(),
    login_name sysname default suser_name()
    GO
    create proc usp_error_test
    @test_type AS test_type READONLY
    as
    begin
    begin try
    select 1/0
    end try
    begin catch
    select * from testfunction1(@test_type)
    end catch
    end
    Mudassar

  • Which frame is used for movie preview?

    Which frame is used for a home movie preview, takin with an iPhone 4s?  I guess the question is, is there a way to specify the frame of the movie which is used for the preview?
    -Thanks

    I would have a look at
    Gallery
    Demo or at the site of a friend of mine
    http://www.schutte.name

  • Photoshop CS6 shut down after using for 5mins; no image can be display on canvas.

    Photoshop CS6 shut down after using for 5mins; no image can display on canvas.

    Thanks for your help.  Actually the problem was solved when turning off the GPU.   In the mean time, I would like to upgrade my Video Card, too.  My existing vedio card detials are as below.  May I seek your advice on any good method other than replace it.

Maybe you are looking for