CS6 will not accept my condensed mic stating; 'the sampole rates of the audio input and output do not match. Audio cannot be recorded until this is corrected. Use the appropriate operating system or audio device control panel to adjust the sample rates

The first things we need to know in order to be able to help are what are your operating system and audio device?
Also the FAQ Setting the Sample Rate in Windows Vista and 7 may help.

Similar Messages

Built-in audio inputs and output don't respond to anything.

Hi there,
Maybe somebody can help me, I have a macbook pro os x 10.8, and i'm having a bit of problem.
I connected a cable to the line input, and before i had a chance to balance the high volume the whole software in the system preference froze, and now the built-in audio inputs and output don't respond to anything, also in the audio MIDI setup menu. The volume button moves extremely slow, and there is no sound at all. Anybody has any idea?
Thanks in advance

Apple store genius bar seems like you best bet.
Ciao.

How can I get my audio input and output devices back? I have no sound and cannot see any of the devices in Audio MIDI Setup..??

Hi, I tried to set up a new output audio device on my mac that would have multiple outputs (iBox Twist speaker and my internal speaker) but when I went to click onto one of the iBox Twist (there were 2 options available: iBox Twist and iBox Twist Stereo), Audio MIDI Setup crashed and when I finally got that back open, I found that there were no audio input or output devices to be found. My sound is working, as when I turn on my iMac, the starting sound still plays, however the volume control in the menu bar is no longer a black colour, but grey and when I try to change the sound on my keyboard it does not change. This already happened to me once, and after 3 hours I managed to fix it very simply (switching off Mac, unplugging power cord, leaving for 15 seconds, plug power cord back in and switch Mac back on, holding Alt, Cmd, P and R keys until you hear the Starting Up sound twice) however this same technique that fixed it once before is not working this time and I am still stuck without sound. I have tried Repair Permissions, rebooting in Safe Mode, Hardware Test and checking for Software Updates. Has anyone else had this problem and managed to fix it?
Thanks in advance for any help anyone can give me!

In case anyone has had the same problem as me, I have just managed to fix this by doing the following:
Switch off Mac
Switch back on in Safe Mode (Hit power button, then hold Shift key until a loading bar appears at the bottom of the screen).
Switch off Mac again
Remove power cord and wait 15 seconds
Plug power cord back in and hold down the keys alt, cmd, p, r all at the same time until you hear Starting chime for a second time and hopefully your audio will back.

How can I use a different driver for audio input and output?

I did a search of course, and came up with something about an aggregate. I have no idea what this is, how to do it, or if it would even work for me.
What I am trying to do is:
1) Record into Logic Express using my Tascam US-122.
2) Have playback come out of my computer sound system, not the Tascam.
If I go over to the Audio setup window, I can only record when the driver is set to Tascam US-122. Likewise, I can only listen to sound when my Built-In Audio is selected. It gets rather annoying going between the two.
So, would this aggregate thing solve my problem? If so, how do I do it? Thanks for any help!
-allen

Yes it should do what you want.
Go to "Audio Midi Setup", and go to the Audio menu and click "Open Aggregate Device Editor". The interface is pretty simple but if you do get stuck, just use the help function in Audio Midi Setup, as it has a step by step guide.
Then when you return to logic, go to the Preferences>Audio>Drivers section and select Aggregate Device as the new driver rather than either the built in sound or the tascam. Then the inputs and outputs will apply to BOTH devices.

Audio input and output

I am trying to get audio to play through from the audio input to the audio output. I have plugged a line-level keyboard into the audio input and as I play it, it shows that it has plenty of input level in the sound panel of the system preferences. However, there is no sound coming out. I have tried speakers, headphones and the Griffin IMic. If I use a program like SoundStudio3 and click the audio "thru" button it works fine, but it does not work without.
Is there a THRU switch that I am missing somewhere? I tried the Applications/Utilities/AudioMIDI setup to configure it, but the Thru button at the bottom is greyed out (not in operation).
Thanks.
2 GHZ intel core duo Mac OS X (10.4.8)

Hi Rich,
Welcome to apple forum.
In my opinion, I don't think OS X have the capability to sent the audio input "THRU" to output directly (I could be wrong).
You need to use Garage band or third party software like you mention before to allow it.
Maybe if you connect third party device that is "supported" the signal become audible and you can hear it. Like mBox using core audio driver.
http://www.apple.com/macosx/features/coreaudio/
Good Luck.

How to use a bluetooth cellphone for audio input and output

Hello, I was wondering how to set-up my Mac Book so that I can use my bluetooth cellphone for audio in and audio out. Ideally, I would like to use my handset for talking on iChat and Skype. Has anyone had any luck doing this? When I bond my cellphone these optiosn do not appear. I know that this is easy to do on a Windows machine but I am not sure about how to do it on my Mac Book.
Thanks!

Yes it should do what you want.
Go to "Audio Midi Setup", and go to the Audio menu and click "Open Aggregate Device Editor". The interface is pretty simple but if you do get stuck, just use the help function in Audio Midi Setup, as it has a step by step guide.
Then when you return to logic, go to the Preferences>Audio>Drivers section and select Aggregate Device as the new driver rather than either the built in sound or the tascam. Then the inputs and outputs will apply to BOTH devices.

Audio input and output at the same time

Hello mac users.
I have one simple question: since the new macbook has one single audio port for both input and output, how could I, for example, play my guitar AND listen to the headphones at the same time?
I KNOW (because I've tried) that with the iPhone headphones with microphone the port CAN physically work at the same time for input and output, so the question is: what can I use to do that? Will a simple splitter do or do I have to use different tricks?
(I know there is a thread on this already, but it doesn't provide a definitive answer)
Thank you!

One of the first questions to ask...
Is the audio input stereo or mono?
When using a headset mic you're dealing with a mono input so you at least know the Mac is capable of that.
If it's mono, and I suspect it is, should be easy to either make or purchase a custom cable that has two female input connectors, one mono input and a stereo headphone input.
However, I'd probably just purchase a USB audio interface, the sound, both recording and playback will be head and shoulders above the Macbooks built in internal audio.
pancenter-

The sample rates of the audio input and output devices do not match.

I am trying to record line-in audio and keep getting this error. have a realtek sound card. I have tried everything I know but cannot record. please help if you can, thanks.

Setting the Sample Rate in Windows Vista and 7

Sample rate off the audio input and out devices do not match - what to do?

This is fundamental, I know, but nevertheless I can't find my way around it. I get this error message when trying to recor:
Sample rate off the audio input and out devices do not match
and am asked to do this:
Use the appropriate operating system or audio device control panel to adjust the sample rates of the input and output devices to use the same settingt.
I have defined the sample rate to 44.1/16 bit in accordance with my inbuild soundcardt.
I am trying to record from LineIn.
When running on a M-Audio sound card I don't face any problems.
HP 8560W, sound card IDT/High definition audio Codec
Any suggestions?
Knud
Copenhagen

You're sure you have set BOTH the input and output settings to 44.1 16 bit?
Which version of Windows are you running? There are a number of posts on this forum about how to fully access both the Windows Mixer and the Mixer for your soundcard. Especially, you need to ensure that all "Windows Sounds" are turned OFF.

HT1925 When I try to uninstall my itunes I go to my control panel to remove the Apple "Application, Mobile Device, software support" then i get a pop up saying that "the feature you are trying to use is on a network resource that is unavailable" I cant fi

When I try to uninstall my itunes I go to my control panel to remove the Apple "Application, Mobile Device, software support" then i get a pop up saying that "the feature you are trying to use is on a network resource that is unavailable" I cant find it. Its preventing me from re installing the new itunes.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

Printer prints but display says Communication lost (device - control panel); Turn off then on.

HP Color LaserJet CM3530fs
The printer is printing when asked to do so by a computer but the display says:
Error
Communication lost (device <-> control panel); Turn off then on.
The orange attention light is illuminated and the display is always lit and shows the statement above.
It does not improve when switched off and on or power disconnected for long periods or pushing reset button at rear of unit.
Embedded web server works normally and thinks that all is ok.
Buttons on control panel do nothing. eg. I cannot photocopy or scan.
The printer is about 2 years old but gets very light use in a family home.
Please help
Thank you.
Haig

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

On device control panel HPofficejet 6500 E709n keeps coming every time i turn printer can't cancel

On device control panel HPOfficejet 6500 E709n - Align printhead keeps coming up the cancell button is lit up and I can not cancel this action.   I turn off the printer and it still comes up and I can do anything on the control panel
thanks    Delores    [Edited for Personal Information]
This question was solved.
View Solution.

sabretooth04 wrote:
OK, relax. We got the original problem fixed now this.   So as not to duplicate or make any mistakes please go here.
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&dlc=en&lc=en&pro...
This should be your printers support page.   Please click on the links and follow what HP has set up for troubleshooting to see if we can't get it back up and running. You may have to read most of the links and steps to see what works. Let us know.
Can i use the link again - I was printing thank you cards and one jamed and i corrected the jam an then my black would not print again.   I wrote and thanked you and could not thank you enough gave the thumbs up NOW I AM IN THE SAME SPOT
AGAIN i DON'T KNOW WHY IT WOULD NOT PRINT - i HAVE PURCHASE 2 COLOR INK AND NEED MORENOW AGAIN. WHAT DO U SUGGEST I DO i LIKE THS PRINTER - DO I NEED A NEW PRINT HEAD    GUESS MY LUCK HAS RUN OUT IN FIXING THE PRINTER

HT5278 How do I download the operating system ios 5 to my iphone 4s? The ios 6 will not let me use my bluetooth in my car.

How do I download the operating system ios 5 to my iphone 4s. The ios 6 will not let me use my bluetooth in my car.

The only iOS currently available is iOS 6.0.1 (6.0.2 for iPhone 5). Once you upgrade you cannot downgrade. Contact your car maker for help.

I have tried to download version11.1 to my itunes so that I can transfer all my info to my new iphone 5 c i am using an imac operating system 10.6.8 OSX it will not allow me to download this !x

i have tried to download version11.1 to my itunes so that I can transfer all my info to my new iphone 5 c i am using an imac operating system 10.6.8 OSX it will not allow me to download this !

What error message ar eyou getting. Why do you say it will not allow you to download?
Verify you meet all the system requirements:
Mac computer with an Intel Core processor
OS X version 10.6.8 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store

Device control panel message fading

the menu on the device control panel of my HP 6500 all-in-one is disappearing. You can tell the selections are appearing, however, I just can't read them and I don't know all of the steps by heart. I've tried restarting, unplugging, everything. Nothing jogs it back to working order.

after researching numerous posts with this same problem and trying a couple of suggested corrective tips, an HP expert said the only thing left to do was to replace the printer. That sucks but I'm still using it anyway. It's just real inconvenient.

CS6 will not accept my condensed mic stating; 'the sampole rates of the audio input and output do not match. Audio cannot be recorded until this is corrected. Use the appropriate operating system or audio device control panel to adjust the sample rates

Similar Messages

Maybe you are looking for