CS6: Windows 7: Driver needed for Monitor Philips 200 WP7

A friend and I have spent about an hour this afternoon trying to get an updated driver for my monitor - Philips 200 WP7. My current driver is 1.0.0.0. I only recently got CS6, and it says I should ideally update my driver. Regrettably Philips doesn't supply a driver for my monitor with Windows 7, only with earlier versions of Windows. Has anyone here updated this driver for Windows 7, and can they recommend anywhere where we can get hold of an update?
Help would be much appreciated.

You don't need monitor drivers, the operating system runs it natively (plug'n'play).
What Photoshop is requesting is an updated video card driver. Not that Photoshop won't work without it, but some (minor) features may be disabled.

Similar Messages

Hp hs2434 windows 7 driver needed for dm1 4310nr

Hi all,
I recently formatted my dm1 4310nr from windows 8 to windows 7. I went to the driver page for the dm1 and it had the Ericsson HP hs2320/hs2330/lc2000/lc2010/hs2340 drivers for win7/8, but not the HP hs2434 drivers.
The hardware ID is
USB\VID_03F0&PID_4B1D&REV_0002&MI_05
USB\VID_03F0&PID_4B1D&MI_05
Thanks!

You don't need monitor drivers, the operating system runs it natively (plug'n'play).
What Photoshop is requesting is an updated video card driver. Not that Photoshop won't work without it, but some (minor) features may be disabled.

Windows 8.1 display driver needed for HP G62 laptop

Windows 8.1 display driver needed for HP G62 laptop

Help us to help you by posting the following information.
1. The complete Model Name. or Product Number. of the notebook - see This HP web document if you don't how to locate the model number and\or product number.
2. The complete version and name of the operating system you are using ( ie Windows 7 64bit ).
It would also help if you let us know which CPU your notebook has installed.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

There must be a real solution to "Windows found driver software for your device but encountered an error installing"

"Windows found driver software for your device but encountered an error installing"
I've spent hours researching this error - Seems like many people have the same issue although there is no difinitive fix or known cause.
I'm hoping someone here has an answer.
Windows 7 Home Premium x64 OEM (HP)
This is not an upgraded Vista system.
It's not a specific driver related issue as it's the same response/effect be it graphics/chip set/usb/printer drivers.
Please dont suggest to flatten and re-install or run a repair install - It's not an option, I only have remote access to the unit
as it's currently in field use.
This is a machine specific issue - identical machine purchased at the same time and configured the same has no issue.
So the story.
User has been fine for weeks - no hardware of software changes except Windows Updates.
A Camera/USB connection that was working no longer does.
Tried in all USB ports
Plug in - windows announces found new hardware, tries to install drivers then fails
with "Windows found software for your device but encountered an error installing ...."
Device manager finds and identifies device although it is in the 'Unknown Device" category.
Manually updating drivers via search/internet or point directly at a driver has exactly the same effect.
Thinking this was just the camera drivers - I researched and downloaded new drivers from camera manufacturers sites
Fuji and Canon.
Same effect.
Deleted/uninstalled drivers completely, deleted/uninstalled all USB root hub and USB devices (hidden and visible)
SFC /Scannow finds no error
Cold boot finds USB and chipset(?) devices on boot attempts to reinstall then we get
"Windows found driver software for your device but encountered an error installing"
So now I have no usb devices at all - memory stick/card reader/printer...... nada.
in fact if I try to update any device driver I get the same message generated.
Restore point does not help either.
After much trawling I found reference to a permisions issue and stale driver cache data.
(This is using an administrator account - not user with admin permissions?)
I'm willing to try anything at this time
I deleted the infcache.1 and other .dat files under c:\windows\system32\driverstore
Copied the usb .inf and .pnf from the appropriate FileRepository directory into c:\windows\inf
Uninstalled all the usb/unkown devices from device manager again.
Rebooted
Takes a little longer to boot as I take it it's rebuilding the driver cache then
a very short hurrah!!!
I can now use usb memory card and pen drives - no issue
Plug in a camera or printer...
"Windows found driver software for your device but encountered an error installing"
Several attempt at this trying different driver versions.
It should not be vendor specific, the other field machine that works is using Microsoft drivers for these devices.
I even copied the drivers from one machine to the other - repeated everything above...
"Windows found driver software for your device but encountered an error installing"
And then the nail in my sanity
Try windows update....
Reboot
"Windows found driver software for your device but encountered an error installing"
but this time its different.
The device it thinks it cannot install is the generic MTP-PTP drivers (Photo Transfer Protocol -so am I getting somewhere)
so it still finds but cannot install.
The cameras are always found but appear as 'unknown devices' and cannot be accessed
Uninstall all USB/unkown again - reboot..
Same message and this time I've lost all the USB again.
Restore point to before Win Update gets me USB back again although I still have no cameras - so theres an update issue as well.
This has to be tied down to a file access/ registry problem although I'm loath to go cutting about without some guidance.
I'm no great believer in 'registry cleaners' unless anyone can point to a definitive/no ad's/sales version that really works.
As I said above, flattening/rebuild at this time is not an option - the user is not best pleased and I'm completley stumped.
If anyone has experienced(manu of you have) and fixed(still to find one) this issue please let me know how as soon as possible.
Chris

I know I am replying to an old thread - but I have the answer and resolved this error, and since this message comes up first in search results, and part of my answer came from this thread, I wanted to help someone else as this took an extra
12 hours and a lot of technical insight to resolve. See below for detailed explanation that others ask for above.
My original issue was that iTunes didnt reinstall. generating this error that said I am trying to access an unavailable network resource and to browse to find itunes64setup (again). This may partly have been due to me deleting old install version folders.
Research led me to completely uninstall apple products and reinstall per their instruction and fixed the issue with iTunes. see
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
The SAME error I had while updating itunes recurred while uninstalling it from my Windows 7 SP1 system...so I went to microsoft Fixit and attempted to correct and it properly uninstalled iTunes for me, which allowed the reinstall.
What didnt work was my USB web root/ root hub, which partly involved my older system and USB 1.0, and the delete/reinstall existing drivers with the c:\windows\winsxs folder as source of drivers (thank you Magon Liu!!!) which I had to figure out what/why
and how.
Then I had an intel chipset issue...my new Iphone wasn't recognizing in plug and play, and there was an error with installing the device drivers for my new iphone 6. Manual applications didn't work, even though a generic device showed in control panel -
device manager with a yellow !
Per above blog answer - I tried to remove and reinstall my USB controller or update the drivers (I have an Alienware M15 laptop - a few years old.) I discovered that the USB host controller - an Intel(R) 5 Series / 3400 Series Chipset family USB Enhanced
Host controller - (port) was not covered by current Intel chipset programs which are Series 6 and later, but did have an update (8/20/2009 v9.1.1.1020) that supported USB 2.0 (and therefore 3.0 backwards compatibility which as an issue with my new iPhone
and some USB thumb drives.) To find this I had to look at the Support - Downloads and Drivers - browse for drivers and somewhere found an option to look for older no longer supported drivers. I found infinst_autol.exe for my case.
Once downloaded I tried to install and failed. Found the log in C:\Intel\Logs and contains:
[InstallDev]
          [Device]
            Driver = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            INF = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
            Installed INF =
            Previous driver package =
!           Warning 0xE0000235: DriverPackageGetPath failed.
            Difx = 64 bit
Execute command: C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\x64\Difx64.exe -DriverInf "C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf" -Flags 20 -KeyPath "Software\Intel\Difx64"
            Using RegDeleteKeyEx
!!!         ERROR 0xE0000246: DriverPackageInstall generated an unexpected error
HERE'S THE ADDED EXPLANATION TO BRIAN'S POST THAT EXPLAINS THE SECURITY ISSUE:
This turned out to be an error for two reasons. First, after manually running the command in an "run as administrator" window (same error result), thinking it related to my anti-virus (turned that off/disabled firewall and A/V), and from this thread
granting my user administrative rights to files in an install folder and trying to reinstall inf files and drivers from C:\Windows\winsxs vs my copied infinst_autol.exe expansion (as found from log in C:\Users\David Samuels\AppData\Local\Temp\IPMx7\WIN7 folder).....that
there was an easier solution as the reason this error actually happens is a permissions problem.
To access the proper windows system folders - you have to be the TrustedInstaller service - not just in the administrator group...or you have to be the actual "Administrator" account. To become actual administrator on
your own laptop, Open a command window "run CMD.exe as administrator", then execute command
> net user administrator /active:yes
This creates a local PC Administrator account with no password. Coincidentally it has proper permissions to windows directories for installing drivers. Log in as this user, go to device manager and update the USB hub and any other drivers. if updating the
USB root - it doesn't replace it right away as the system cant disable the currently resident in memory "running" driver - you have to update, then restart the system, log in as administrator and repeat at the next lower layer that has issues.
Once completed - log in as yourself again and disable the administrator account in a command window with > net user administrator /active:no
This in my case enabled all my USB 2.0 and 3.0 devices on my originally only USB 1.0 laptop and everything else works properly again - I hope this helps many of you to resolve your own issues that were difficult to find and resolve and that got as far as
this thread. Good luck!
Regards,
Dave Samuels

This is the messsage i get when trying to install nano 7th Generation........windows found driver software for your device but encountered as error whille attempting to install it .......what do i do plzs help.

This is the messsage i get when trying to install nano 7th Generation........windows found driver software for your device but encountered as error whille attempting to install it .......what do i do help plzs.

How to restart the Apple Mobile Device Service (AMDS) on Windows

I have using I phone 5c after connected with my HP elite book 6930p laptop, Automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.

I am using I phone 5c after connected with my HP elite book 6930p laptop, (Installed Window 7 32 bit). automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.
I did install itunes and update also. but the above problem still same.
Kindly give me solution of it. awaiting.
Regards
Abbas Kader

try it with another computer to check if it shows up
if so
uninstall all apple software
reboot
use regedit to search and remove all itunes keys
reboot
resinstall apple software
if non of that helps then try another cable
if that don't help could be your phones connector is damaged

Requirements for JDBC Driver needed for SOA 8 }connection pool

Hi,
I have an AS400 jdbc driver. This driver is JDBC API version 2.x. Also is a Driver Type 4.
What are the requirements of a JDBC Driver needed for connection pool in SOA 8?
Thanks.
Lorenzo Jimenez

You can use pretty much any jdbc driver, including type 2 and type 4.
You need to make sure your shared libraries needed by the driver are available to the appserver when you boot.
Other than that, it is no different than configuring any other driver.

Windows 7 - 64 Bit Driver Needed For Sound Blaster Live! 5.1 Model SB0100

I am having trouble finding a working driver for Windows 7 - 64 Bit for a Sound Blaster Li've! 5. Audo Card Model# SB000
I downloaded driver file SBL_PC64DRVBETA_LB_2_03_0005.exe which I think is a 64 Bit Sound Blaster Li've! update, but Windows 7 does not allow it to be installed because it is not a digitally signed driver. It also seems Creative is no longer supporting these old cards with new driver updates.
I love the card though. I have bought more recent sound cards and the sound of this card is still much better than the more recent sound cards I have bought. So I would like to keep using it if possible.
Are there any driver solutions?

I recently answered about the same question:
If you?use Vista or Windows7, then there is no official driver. You can only use alternati've drivers like Vista Support Pack by Daniel_K or the one from KXProject (better). But if you have more than 2 gigs of memory installed or an x64 OS, then both drivers will be half-working (as far as I remember, Daniel's driver won't work with more than 2 Gb of memory installed in any OS, and with KX-driver there will only be a problem with MIDI playback with more than 2 Gb AND x64 Win7).

Windows 7 driver support for T60(p)

Hello all
Im a happy owner of a Thinkpad T60P, 2007-8LG model. However, im getting much tired of Windows XP and want to use the upcoming Windows 7 OS, but im a bit unsure if there will be any driver updates for the T60 models.
I've seen the Windows 7 beta drivers page from Lenovo, but this only includes drivers from T61 and up. Can anyone confirm that there will be drivers released for T60(p) models as well (or in case the product line is ditched).
Thanks in advance
Solved!
Go to Solution.

Nocture,
I have a T60p (8744-J2U) with Windows 7 (Build 7229) runing very very happily. I have 4 GB installed. All the key drivers you need have been released and should work fine on your system.
If you want a super clean install, refer to my post on Device Driver Installation Order thread.
Also, if you want a really stable laptop, DO NOT UPGRADE. Backup your system and data, VERIFY IT and then delete the partitions during install and let Windows 7 partition and format the drive.
Pierre

Windows 7 driver needed?

I purchased the HP Photosmart C4680 to be shared on a home wireless network from a Windows XP computer. The printer works fine on the computer on which it is installed. I also successfully added the printer to a laptop running XP and it prints fine.
However, I tried to add the printer the same way on my daughter's new Windows 7 laptop and although it seems to have found the printer, I cannot get it to print. Not even the test page. Do I need to install a Windows 7 driver?

I'm having a similar problem with a Canon MP780 printer and a new HPp6230y running under Win7.
If you put the printer on the HPp6230y, it gets the correct Win7 driver right away any it will print nicely. However, if you try to print from a XP machine on the network it can't. The problem seems to be that the HPp6230y lacks the XP driver. When attempting to share the printer with XP machines ....
On the HP-p6230y (Win 7) machine: Control Panel > Hardware and Sound > Devices and Printers> double click the icon of the MP780 printer.
Note: Don't click Network Sharing Center, it's a dead end.
Next I clicked display printer properties and a wIndow pops up. Select sharing tab, click button Change Sharing Options.
At that point it says that if you're sharing computers are running different version of Windows you need to install additional drivers. If you click the Additional Drivers button it assumes that you can provide the precise path to that driver. But I have no idea where that driver is located, what its name is whether from my original printer setup disc or on the computer where the printer is connected.
If you put the printer on the XP machine it prints fine from that machine, but the HPp6230y (Win 7) can't print to it. It complains it can't find the driver.
On the HPp6230y (Win 7) machine:
Control Panel > Hardware and Sound > Add a Printer > Add a Network / Wireless Printer > A list of printers appears, select printer.
Message: No Driver Found. Windows can't find a driver for Canon MP780 Series printer on the network.... blah blah..To locate oe manually clock OK. Otherwise.... blah blah .... consult your printer manufacturer's web site.
If I try to get it from my original Canon printer install disc, I can't find it. There's lots other bubndles software crap on there and tons of dll and inf files that are unrelated.
If I go to canon web site I get a self-extracting exe for XP but I dare not try execute that on my new Win7 machine
I have verified that the network is working OK and sharing computers are fully trusted.
On the Win 7 machine I have exhaused all paths under Control Panel > Network and Internet > Network and Sharing Center. [DON'T take the Homegroup path - that only useful if all machines on the network are running Win 7 - onother time wasting nightmare]

ATI Radeon 9000 Pro Mac AGP (driver needed for OS 9.2?)

Hi guys!
How's everybody doin?
I just picked up a used ATI 9000 AGP 128 MB (as an upgrade for my G4 Quicksilver 800 MHZ).
I'm using 2 HD's (one with OS9), the other (with OSX)
I think OS 9.2 will do ok without the need for a driver, but I just wanna make sure ...
Thanx
Everyone is very helpful around here
Mike

Hello again Carl, and Dave
I know it's been a while since we last talked about this issue. Well apparently, I do have OS freezing problems
with 9.2 and the ATI 9000 Mac Pro - take a look:
http://discussions.apple.com/message.jspa?messageID=4289264#4289264
Wonder if your driver would solve this?
But can I put your driver in the system while it's still functioning with the older OEM video card back in?
(that's the only way I can get the system not to freeze)
Thanks
Mike

'windows founds driver software for your device but encountered an error when trying to install it'

i have recently downloaded the new itunes 10 nd now my ipod driver software is encountering errors when trying to be installed in my computer. i have uninstalled and reinstalled itunes and its still happening. i'm away to go to ******* tits, - help me please.

Try:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Also:
Trouble installing iTunes or QuickTime for Windows
The drives and service topics of:
iOS: Device not recognized in iTunes for Windows

CanoScan 88))F driver needed for Snow Leopard

I need a Driver for the Canon CanoScan 8800F. It does not work with the system. I checked ith Caon and there isn't a driver for it. Does anyone know how to fix it?

Looking at the Canon Australia web site, there is a version 13.9.1 driver posted for the CS8800F that quotes 10.6 as being supported.
http://support-au.canon.com.au/contents/AU/EN/0100018002.html

Canon 3245 driver needed for Mac OS X Yosemite 10.10.1

Dear
All the drivers available on Canon website do not support version 10.10.1
I am urgently in the need for a driver Canon 3245.
Please help.
Thanks and Regards
Shubham
Mackbook Pro, OS X Yosemite, Version 10.10.1

This includes drivers for 10.10
http://www.usa.canon.com/cusa/support/office/b_w_imagerunner_copiers/imagerunner _3225_3230_3235_3235i_3245_3245i/imagerunner_3235#DriversAndSoftware

Web-Cam: Linux Driver Needed For T400

Hi all,
I have Lenovo T400 that works perfectly. Had Win-7 Ultimate dual-booting with new install of Linux Mint 9 (Isadora). Decided to delete Win-7 Ultimate.
Linux Mint OS 9 fully confiqured and running nicely recognizing all hardware except FingerPrint and Webcam device.
The Fingerprint device is cool, but would like Webcam Device Driver.
Is there a Webcam driver available for the Lenovo T400? If so, please reply,
Warmest Regards,
~ digi

In a terminal as your user:
[code]
lsusb
[/code]
You will see the device ID code for your camera. Here is mine on ThinkPad Edge: 04f2:b1cf
You can then do a google search for "Linux web cam xxxx:xxxx" compatibility. It is likely that the driver is already loaded because of the auto detect function of the kernel scripts.
You can check that in a terminal as your user:
[code]
lsmod
[/code]
Look for modules: v4l1_compat, videodev, uvcvideo.
Neal

CS6: Windows 7: Driver needed for Monitor Philips 200 WP7

Similar Messages

Maybe you are looking for