CS6 Working Fine ... Then Unusable
I am losing my mind. I have tried everything with Adobe Premiere. I have been working on a 30 second file and it keep crashing. Here's what I've tried:
I thought I isolated it to a plugin, so I deleted it. Still freezes.
I disabled all 3rd party plugins. Still freezes.
I downloaded Premiere from the cloud so I could have a different version. Still freezes.
I have redone my project with re-exported clips and new effects. Still freezes.
This last time it was working fine for an hour then it froze. I reopened. Froze again. Reopened, was okay for about 2 hours, now I can't event open my project file. I don't know what to do. I'm a week behind because of this.
Anyone have any ideas at all?
What are you editing, and does your sequence match your video?
Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341
Similar Messages
-
My phone was working fine, then just went completely blank, and now is totally unresponsive
Plug it in to mains power for at least 15 minutes. If it doesn't automatically come on, try a Reset... press the home and sleep/lock buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
-
I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone for some reason but for 2 years previous it could no problem? tmobile says it is a problem with my phone and not their service.
Any ideas what to do?I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414). You will be given the option to restore to that backup at the end of the restore process. Your messages are stored in the backup so restoring to the backup will return the messages to your phone. Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process. -
This app was working fine, then suddenly it won't display any of the photos. One day the photos were there, gone the next. It still shows how many photos are there but just shows a white screen. I can't export anything to the photo album. Adding photos to existing folders yields the same result, only white screen displayed. However, I can create new albums and add photos to those without issue. Does anybody know how to recover the "missing" photo" I was going to try reinstalling the app but it's no longer available in the iTunes App Store. Thanks, Tracy
1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
Even organize your photos in albums — right on your device
2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad -
The video app on my iPad now only shows a black screen. Used to work fine then crashed in the middle of a short video. When I open the app the screen is just blank. As it is a default app I can't delete and reinstall. Anybody else experience this?
Try searching for the name of one of your videos on the iPad's spotlight search screen - swipe your first homescreen to the right, type in it's name, and if it finds it tap on it to see if it plays.
If that doesn't work then try closing the Videos app via the taskbar : from the home screen (i.e. not with the Videos app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Videos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option if the two above don't work is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Is there a way to revive my ipod? it was working fine, then all of a sudden its completely dead.
is there a way to revive my ipod? it was working fine, then all of a sudden its completely dead.
Have you seen this article yet?
iPod won't turn on
B-rock -
I am no longer able to get video playback on my pad. Was working fine, then nothing. What do I do?
I am no longer able to get video play on my pad. It was working fine, then when I went to use it again later, nothing. Any suggestions as to what to do?
Quit the Videos app completely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work - try this. Swipe to the right from your first home screen to get to the iPad Spotlight search. Type in the name of any of your movies in the field at the top. When the movie appears in the search - tap on it and it should start to play. Let it play for a minute or so - hit done - go back to videos app and see if all is OK. -
FaceTime was working fine then stopped. Wants me to sign in but fails to activate. I rebooted my IPad but that didn't help.
Hi jrthomus,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with Facetime on your iPad:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Your iPhone telephone number is linked to your Apple ID when you sign in to FaceTime or iMessage. This allows you to use your iPhone number with FaceTime and iMessage on other iOS devices.
This feature isn't available on iPod touch (3rd generation) and iPad (1st generation).
This feature is available with OS X Mountain Lion v10.8.2 or later.
You can sign in to your Apple ID on an iPhone by tapping Settings > FaceTimeand Settings > Messages > Send & Receive.On iOS devices, find out which addresses are enabled with FaceTime and iMessage by tapping:
Settings > Messages > Send & Receive > You can be reached by iMessage at:
Settings > FaceTime > You can be reached by FaceTime at:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iPhone automatically registers your phone number for use with FaceTime and iMessage during activation.
To use FaceTime with your Apple ID, navigate to Settings > FaceTime and tap "Use your Apple ID for FaceTime."
To use iMessage with your Apple ID, navigate to Settings > Messages > Receive At and tap "Use your Apple ID for iMessage."
When you enable FaceTime or iMessage with an iPad or iPod touch, you will need to enter a valid Apple ID and password. Other users will be able to contact you on FaceTime and iMessage using this email address.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
I hope this information helps ....
- Judy -
I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off. When I tried to turn it on again, it kept asking for the password over and over. What do I do now?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Linked server using kerberos working fine then after inactive for 10 minutes start receiving the anonymous logon error
Hi,
This Could be a double hop problem or some thing could have gone wrong with your SPN
This could also be non trusted Service Account under which your SQL Server is running
Check the following links
http://blogs.technet.com/b/askds/archive/2008/06/13/understanding-kerberos-double-hop.aspx
http://blogs.msdn.com/b/sql_protocols/archive/2006/12/02/understanding-kerberos-and-ntlm-authentication-in-sql-server-connections.aspx
https://technet.microsoft.com/en-us/library/cc739474(v=ws.10).aspx
Hope this helps
Thanks
Bhanu -
Apple tv keeps cutting out- worked fine then stopped working? what's up with it?
Apple tv keeps cutting out- works fine then stops working? Just Cut's Out. What's up with it?
Just started. Worked fine since I purchased it. It restarts after a 2 minute pause.
Do Not know how to add to Question - Sorry. -
I used my apple tv wirelessly and it worked fine,then I plugged an Ethernet wire into the Apple TV to move it and could not it to connect. When I unplugged Ethernet wire it will not give me a wireless option. How do I get that back?
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
1. Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
2. Connect the micro USB cable to the Apple TV and to your computer.
3. Reconnect the power cable (only for Apple TV 3)
4. Open iTunes.
5. Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
iPad2 is dead...worked fine, then when I tried to use it an hour later, the screen was black. Home button did nothing; on/off button did nothing. Tried charging overnight...still does nothing at all. Also tried syncing with my desktop; still nothing. Got it in March and have never had an issue before this. Thanks.
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
The Ipad Air was working fine - then it went blank. It will not turn on again. It was fully charged It is less than 2 months old.
A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure. -
Itouch 5th gen was working fine then I shut it off and it wont turn on. tried itunes and when its siting here it heats up badly
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The hotness indicates a possible hardware problem. If the iPod is defective and not abused Apple will exchange it at no cost -
I pad was working fine then when tring to access safari or facebook recieved a message Safari cannot open page because your I pad is not connected to the internet. How do I correct?
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
Maybe you are looking for
-
When I drag a message from trash folder back to inbox it disappears- where is it?
I see the key command in the Messages menu for moving messages back to inbox, but really, there should just be a "move" button for moving messages from folder to folder.
-
have marked to not copy in advanced options, but still copies files.
-
PDF Thumnbnail preview PROBLEM (Windows 7 x32)
I have problems now with my adobe reader thumbnail preview. This started when I had unistall my Adobe Photoshop cs5 white rabbit to replace with Adobe Photoshop CS5 Extended. When I uninstalled it with Revounistaller, the thumbnail preview for my pdf
-
Exception Raised error, not sure how to fix it.
So I bought this game, Dragon age origins, and I try to launch the application. When I do, I get this error " Exception raised, Unhandled page fault on read access to 0x00000038 at address 0x0088d374. Do you wish to debug it ?" It has a Yes and a No.
-
Afternoon everyone, We load data into our cube monthly, and when running the calc on the database it can take between 2/3 days to complete. I appreciate that calc time can be determined by a wide variety of factors (number of dense/spare dims/members