CS61 Order BOM issue

Dear Gurus,
I have order BOMs created through CS61 against sales order line items. When I do costing at sales order level it does not explode the Order BOM and hence I am not getting the correct costing. The Order BOM has BOM Usage as 1 (production). I have ticked the Order BOM indicator in configuration OMIW. Also, the Order BOM items are costing relevant.
Is there any other configuration which needs to be done in order to get costing through Order BOMs?
Thanks
Geravine

Hi,
Go to OPPQ ( Plant Parameters for MRP) -
> Select your Plant & choose maintain -
> go to next screen and choose BOM Explosion
Inside BOM explosion, you will find check box : SOrd/ WBS BOM active.
Tick this check box and save the settings.
Then try exploding order BOM.
Your issue will be resolved.
Regards,
Tejas
Edited by: Tejas  Pujara on Aug 26, 2009 12:07 PM

Similar Messages

  • Problem in cs61 sales order bom

    Dear sir
    i created  sale order for  item 100  x matrial and item 200 y material ,sales order no 1234.for this sales
    order i want to create sales order bom by cs61 . when i create this the system should allows item 100 for x matrial and item 200 for y material for same sales order . but if  i give  material y for item  100 and material x  for  .200also the system allowing to create the sales order bom.this will effict the bom .
    so system should not allow to create the sales order bom when i give wrong material to item .
    pl give me correct solution for above problem
    regrds
    Baswa

    Baswa,
    when you create sales order BOM through CS61 its all together new BOM specialy meant for that sales order - material combination.
    To create it you can take referance of Material BOM , but there is no such functionality to restrict the componet changes or quantity changes.
    The CS61 its self is meant for creating customer specific BOM , which can be all together different from Material BOM. as in many business its required that , we need to modify our existing BOM on customer request to incorporate that customer specific changes. For all other things standard BOM is there in system and its not affected by this new customer specific BOM.
    If you need further help , discribe your need of creation of sales order BOM.
    Hope it helps you.
    Regards
    Ritesh

  • Find FM or BAPI to sales order routing (CA01) and sales order bom(CS61)

    Hi Experts,
    I just want to find a function module or bapi to create sales order routing.The related transaction is CA01.
    For the created routing, it's releated with sales order number and sales order item.
    And also need a FM or BAPI to create sales order bom.The related transaction is CS61.
    For the created BOM, it's releated with sales order number and sales order item.
    Watting for your response!!
    Thanks a lot,
    Frank

    Hi Experts,
    I just want to find a function module or bapi to create sales order routing.The related transaction is CA01.
    For the created routing, it's releated with sales order number and sales order item.
    And also need a FM or BAPI to create sales order bom.The related transaction is CS61.
    For the created BOM, it's releated with sales order number and sales order item.
    Watting for your response!!
    Thanks a lot,
    Frank

  • Sales Order BOM-Cost of Sales issue

    Dear Gurus
    Standard Sales Order BOM supports either Pricing Inventory control, Delivery at Header level (Item category group ERLA) or All these at Component level ( Item category group LUMF).
    I have a scenario where in Header is Intangible and Relevent for Pricing only. However Down the level parts are relevent for Delivery and Inventory control.
    I am exploding the Sales Order BOM with Item category group ERLA. However When I do Billing only for Header I do not get Cost of Sales as there is no Cost in Header. I cannot bring Down the level components in Billing as these are not Billing relevent.
    Just To Clarify it more these are Cost is not posted in COPA as Protability analysis documents are only generated with Billing.
    Regards,
    Neeraj Srivastava
    Looking for your valuable inputs How the Cost of Sales can be achieved.
    Regards,
    Neeraj Srivastava
    Edited by: NEERAJ SRIVASTAVA on Jun 5, 2008 5:15 PM

    Hi,
    just try to use BELOW Function moduleS
    CABM_READ_BOM
    CABM_READ_BOM_HEAD            
    CABM_READ_BOM_ITEM            
    These are function Modules ( BOM link to Sales order)
                        OR
    See the function Group CKDI to view more function modules that have relation between BOM and Sales order
    Thanks
    Ramesh

  • How to compare sale order bom and production order bom.

    i would like to provide report with respect to comparation of sale order bom and production order bom, but i am not familiar with SD and PP, can anyone give me some clue? i only know sale order bom is created via 'CS61', afterwards run mrp to get production order, the process appears complicated, i needn't know the process detail, just want to know how to get sale order bom and relative production order bom. please guide me.

    Hi,
    Check Tcode:CS14 to SD/PP BOM's
    Chidambaram

  • Plant change in Sales Order not possible due to Sales Order BOM

    Hi all,
    we are trying to change the Delivery Plant in a Sales Order after the creation of a Sales Order BOM, but it gives a V1773 message first, then a blocking error V1810. The same happens with a Production Order.
    How can we change the Delivery Plant after the creation of one of these objects?
    Our scenario:
    - Make To Order
    - Sales Order BOM created with transaction CS61
    - Sales Order Routing created with transaction CA01
    We need to create the Sales Order BOM on the Production Plant (which doesn't change), but we need to be able to change the Delivery Plant in any time.
    Should you have further questions, feel free to ask.
    Thanks in advance,
    Giuseppe

    Hello Caselli,
    For V1773, please check the solution provided by note 588884, which is a modification. With this note it turns possible to delete all multi-level sales order BOM using transaction CSKB, which may be useful.
    The behavior mentioned by you is the standard behavior of the system. The scenario works as designed, a plant change is only possible as long as there is no other document assigned to the sales order.
    Longtext of V1 810 says:
    The plant can no longer be changed in the following situations:
        2. There is a production order for the order item but it is not a static assembly order.
    Your scenario seems to be point 2 as mentioned above. You can check the requirement type (VBAP-BEDAE) and requirement class in OVZH and assembly type (MNTGA) in OVZG.
    If you change the plant for the items with existing production orders, it will cause the incorrect values in the COPA. An order item is assigned to plant A and the corresponding production order exits. This
    means that the costs are assigned to plant A (this is the place where the costs accrue). Order and production order will be balanced at plant A.
    If you now, after the process has already started, should allow to change the order to plant B the following examples of problems will come up:
    - The costs accrued in plant A (see production order)
    - The SD order is now assigned to plant B, this means billing will be with plant B
    This leads to the fact the costs are on plant A, plant B has a benefit. Plant A cannot settle the costs and plant B has unexpected earnings. Inconsistencies in all involved process steps, SD, CO, COPA are the results.
    If you want to change the plant in the sales order you'll have to perform these steps:
    = Delete the production order.
    = Change the plant of the sales order item from A to C.
      This should be possible unless there are other documents which are already assigned to this sales    order item. Save.
    = Create a new production order and assign it to the sales order item again.
    I hope I am able to help you with this information.
    Best Regards,
    Bhavin Joshi

  • Sales order BOM is not reflecting in sales order

    Hi Guys,
    I have created a sales order in which all the items of the sales BOM (ex:A-a1,a2,a3).have been exploded.My strategy is make to order and i am dealing with valuated stock.
    Now i have created sales order BOM for that particular sales order thro cs61.I have made some changes in the item level (ex:A-a1,a4,a5) in the order BOM i want these changes to be reflected in my sales order is there any way to do so...
    RAMASWAMY

    Dear,
    You have to configure BOM explosion in VOV7 - item category settings - BOM area and you can specify whether it is a single level or multi level explosion etc., Depending on the configuration made here, the BOM explosion takes place in the order.
    Regards,
    R.Brahmankar

  • Express document "Update was terminated" in CS62 order BOM change

    Hi All,
    I am creating one sales order BOM with reference to Material BOM. While creating BOM, we have setup BOM creation in such a way that while creation BOM status will be inactive.
    While changing status to active using CS62 transaction, I am getting error Express document "Update was terminated" from author. And after BOM created in CS61 is getting deleted automatically.
    Regards,
    Sachin

    Hi,
    There could be a database related problem. Contact your Basis Pople.
    Regards,
    Siva

  • Order Bom Error

    Hi Gurus,
    I create Order Boms thru CS61, the T-code runs successfully stating
    "Bom successfully created for the order/Item"
    when i go T-code CS62 or CS63, an error is shown
    Express Document "Update Terminated" by Author  and User Name
    and also Bom does not exist
    Thanks in Advance,

    Hi ALL,
    My Problem was related to Data Inconsistency in following Tables,
    MCHA and STPO which are used for Batch Classification and BOM.
    so we have run a report ZCCLZUOB with class type 022.
    The Data Inconsistency's were deleted and the the T-codes are running fine.
    Thanks for all the reply sent by all which was used one way or the other for the solution.
    Regards
    Sunder.

  • Read Order BOM Changes

    Hi All,
    How to read/track the order bom changes (CU51)?
    I want to track all changes made using CU51 for perticular sales order, like component deletion, change in quantity etc. I checked the tables CDHDR and CDPOS but did not get any information.
    Please help

    Sachin,
    How did you solve this issue ? I have same req in my prj.....any help in this would help us...
    Please let us know how did you solve this ? Is it by CDHDR or User exit tracking changes and passing it to Ztable ? any other method ?
    pls let us know ...thanks in advance....
    Gayathri

  • CU51 Sales Order BOM

    Hi All,
    The big issue that I have is as follows:
    I create an offer with a material which has a "material BOM".
    Then I run transaction CU51 (Order BOM).
    Here SAP brings the material BOM and I'm able to add or to remove any
    components. I get the material BOM and I do not do any change to it.
    Then I go to table KDST. BUT THERE IS NO entry for this sales document.
    I want to get sales order bom(which is different from material BOM) same as CU51. Any function module please advise.
    I cant use material bom beacuse they changed the bom at sales order level. I want exactly cu51 bom .
    Yours,
    Anitha

    Hi Anu,
    Do you want to display that in report or the requirement is different that this.There is some discussions on the same topic please check.
    [Cu51 Bom|Bapi or FM to maintain BOM order (CU51).;
    Regards,
    Madhu.

  • Reg: sales order BOM

    hi friends,
    can anyone explain me what is SALES ORDER BOM.
    Where it is applicable.

    Dear
    Sales Order BOM are used in Make to Order .If you want to assemble the products and depending upon the assemblies you want to price.   For eg. if the customer asks for a certain combinationa of Material A, B and C respectively, then you create a Material Master record Material D with item category group as LUMF.  While the Materials A, B and C are created with standared item category groups NORM only. 
    Then create a sales BOM using Tcode CS01 and enter the following details: 
    Material : Material D 
    Plant : Plant in which you created the material. 
    BOM Usage : 5 (Sales and Distribution) 
    then give the Materials A, B, and C and give their respective quantities. 
    Before you have to create pricing condition records for Materials A, B, and C. 
    Then configure the item categories ( T - code : VOV4). 
    When processing the sales order, just give the Material D and the system will pick up the corresponding assemblies for that material and populate in the order. 
    The item category for the header item will be TAP and the item cateory for the items will be TAN.
    In this cas the Material D is called as the higher level Item , and all the assemblies are called as the sub items.  Here the subitems are relevant for pricing and delivery where as the header item is not relevant for neither pricing nor delivery. It just acts as a text item.
    However , you can create Sales Order BOM by using Tcode : CS61 .Specify Sales Order, Item , Material, BOM Usage 5 in CS61 and create the same. Activate SO/WBS BOM active under BOM explosion in OMIW or OPPQ
    Regards
    JH

  • Order BOM process- material vairant for configurable assembly

    Hi,
    I am working on multi-level material variants with order BOM process. The configurable header material and assembly should be
    replaced by material variants after configuration is done. I configured the multi-level BOM explosion at sales order. After I configured the assembly, I executed type matching and a material variant for assembly was found. But the system didn't replace
    configurable assembly with material variant automatically and I couldn't find any functionality to carry out replacement. The header material was replaced by material variant in sales order entry. However, while I tried to carried out technical processing to
    create order BOM (CU51), the error message shows that I couldn't create order BOM due to the header material has been replaced
    with material variant. Does anyone have experience at multi-level material variants with order BOM process? Please kindly help.
    Thanks.
    B. Regards,
    Nancy

    Hi ,
    Could you pls explain the issue bit more clearly, As per my understanding you are using order BOM with variant configuration
    Is it correct ?
    Check the configuration profile settings (  CU41 ) , did you selected the order BOM radio button

  • Order BOM functionality suggestions required

    Hi Gurus
    I have a very immediate required question on a new functionality at my client place. My client had given a master data BOM and wanted to edit the BOM based on the customer requirement and selected BOM components should get transferred to MRP for the planning.
    So BOM is already maintained and based on the order , Order BOM should be maintained. So after fixing the order BOM components should get transferred for planning. Please Suggest this scenario with all the tcodes and configuration involved .

    Hi,
    Order BOMS are to be used in a MTO scenario if the components are to be transferred to planning.
    No additional customization are required for order bom, following steps are to be followed
    (1) Create a master bom - CS01
    (2) Create a sales order - VA01
    (3) Create Order BOM - CS61 (you can refer to the master bom & copy the relevant components)
    (4) Execute MRP - MD50/MD02
    (5) System shall generate the planned order & it shall have the components assigned in the order BOM
    I hope this addresses your query
    Warm regards,
    Umesh

  • Production Order BOM...

    Hi,
      I am trying to get the associated BOM with a particular Production Order. I was told to use the FM 'CS_BOM_EXPL_MAT_V2', but that gives the material BOM. Is there any FM or BAPI that I can use to get the Production Order BOM? Thanks,Sagar.

    hi ,
    Thanks for info ,have u heard of BOM usage ? like 1 for production / 5 for sales bom .So When u creating the production order Sap will explode BOM of the FG material , So there is no BOM that is only for production order.
    But i will agree with ur problem , what is user can delete Some materials in the Final Confirmations of Production orders So to resolve this issue USE table <b>RESB </b> with RSNUM of AUFK-AUFNR.
    correct me if i am wrong.
    Regards
    Prabhu

Maybe you are looking for