CSA 6.0 Server Agent & Windows Server 2008

Does CSA 6 Server Agent support Windows Server 2008?
If not, any idea when?
It would be nice to be able to deploy current server operating systems with CSA.

No, here is the supported os list :
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5707/ps5057/ps9595/data_sheet_c78-458616.html

Similar Messages

Problem instaliing sun one LDAP server on windows server 2008 r2

Hi all ,
I am trying to install Ldap server (Sun ONE Directory Server) on windows server 2008
I am using apache-tomcat-7.0.28 and java jdk1.7.0_05
I am following this manual for installing :
https://blogs.oracle.com/marginNotes/entry/installing_directory_server_enterprise_edition1
I have a problem with the cacao agent and how to install it .
I've got this error message :
c:\Program Files\Sun\dsee7\bin>dsccsetup cacao-reg
Configuring Cacao...
## Failed to run "c:/Program Files/Sun/dsee7/ext/cacao_2/bin/cacaoadm.bat" set-
aram "jdmk-home=c:/Program Files/Sun/dsee7/lib/private"
#### Cannot create service for instance: [cacao.instance.name].
#### Cannot perform firstime inialisation and configuration.
## Exit code is 1
Failed to configure Cacao.
I stuck and with no other solutions . I hope if you could to help with this issue .
i will glad to know if there is any other ways to install this specific Ldap server ,
Thanks,
Alon

You most likely skipped the step of starting the installed server prior to trying to access admin URL. Please check this document:
http://docs.sun.com/source/817-1830-10/win.html
Relevant section is:
You can start the Administration Server in either of the following ways:
# Select Start Menu -> Programs -> Sun ONE Web Server, and choose Start Web Server Administration Server.
# From the Control Panel�s Services item.
HTH...

Error Installing InDesign CS3 Server on Windows Server 2008 R2 64BIT

Hello there-
I'm trying to install InDesign CS3 Server on Windows Server 2008 R2 64BIT (x64) Edition, however, we get a failure indication on the installer. Before, we have installed it properly on Windows Server 2008 R2 32BIT (x32) but some how we cannot proceed on a x64 box.
Is there any limitation on this sense? Any documentation about it?
Thanks and appreciate your answers.
Regards,
Gustavo Ortega
Software Engineer

Hello,
Have you followed these recommendations from the installation guide ( Installation Guide u2013 SAP Content Server on Windows 2008 ) :
Note: In the IIS 7.0/7.5, all the roles are not selected during the installation by default,
Please make sure all the below roles are included and IIS 7.0/7.5 is installed.
Roles needed in IIS 7.0/IIS 7.5.
Common HTTP Features
Static Content
Default Document
Directory Browsing
HTTP Errors
HTTP Redirection
Application Development
ISAPI Extensions
ISAPI Filters
Health and Diagnostics
HTTP Logging
Logging Tools
Request Monitor
Tracing
Custom Logging
ODBC Logging
Security
Basic Authentication
Windows Authentication
Request Filtering
Note : Anonymous Authentication should be enabled.
Performance
Static content Compression
Dynamic Content Compression
Management Tools
IIS Management Console
IIS Management Scripts and Tools
Management Service
IIS 6 Management Compatibility
IIS 6 Metabase compatibility
IIS 6 WMI Compatibility
IIS 6 Scripting Tools
IIS 6 Management Console
Note: There is a File Upload limitation in IIS 7 on Windows 2008 Server, IIS will reject any file that is
larger than 30 MB. This is a default limitation of IIS. You can increase the maximum file size by
setting the parameter maxAllowedContentLength in the file ApplicationHost.config.
The following command can be used to set the parameter from the command prompt, please
change the directory to Windows\System32\inetserv and then execute the command.
appcmd setconfig /section:requestFiltering/requestLimits.maxAllowedContentLength:150000000
The value is only an example, in this case the upload limit is set to 150MB.Server has to be restarted
after execution of this command.
Also, are you using Maxdb to store the files or is it a "flat files" content server ?
HTH.
Steve.

SQL Server Agent Windows Service

I have created a override for parameter, Alert only if service startup type is automatic in monitor SQL Server Agent Windows Service to false, as my SQL Admin informs that this service startup type is Manual. As SQL servers are clustered, even SQL agent
service runs on even node and odd SQL agent service runs on the odd node. Should this resolve the issue my SQL Admin's are complaining they were not receiving notifications for SQL Agent stopping. Or, should it create noise as I should expect alerts from odd
SQL Agent service that are not running on even node and vice versa.
From SQL Server end,
Thanks, Harry :-)

Hi,
The below article should be helpful:
Monitoring Clusters by Using Operations Manager
http://technet.microsoft.com/en-us/library/hh212773.aspx
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Installing Sun Directory Server on Windows Server 2008

Has anyone tried installing Sun Java System Directory Server in Windows Server 2008? I am trying to do this but get an error stating that nss3.dll is missing at configuration time.

Windows 2008 is not a supported platform for any DSEE release. Even if you get it working, Sun Support won't be able to help if you have issues.
This issue seems to have been reported on Windows 2000 with DSEE 6.0 too and one workaround is to remove the nss3.dll from c:\winnt\system32 or equivalent directory. Please note this workaround is not targeted at Windows 2008, so use at your own risk.
http://sunsolve.sun.com/search/document.do?assetkey=1-1-6680728-1
Winodws Native DS6.0/ISW6.0 Zip:error could not locate nss3.dll
Edited by: etst123 on Jan 29, 2009 10:39 AM
(added link to bug report)

Problem In Data Base Creation... Oracle 10g server in windows server 2008

I have installed Oracle 10g server in windows server 2008 and the domain & active directory r created now i am trying to create the databse i am getting usual error (tns protocol adapter error ) in the 2% i have removed the domain and the active directory from windows then i created but this is not a solutions i need to create the data base in the domain server...

this is a forms forum.
please post in Database Installation

Backup Windows Server on Windows Server 2012

We install backup windows server on windows server 2012 standard, more when I go in tools to be able to manage it he is not there, try the Wbadmin.msc command, and returns me a message that Windows can not find the Wbadmim.msc . Have uninstalled and reinstalled
feature several times and still nothing.
I am new to the forum, so descupem me if there is another topic like this.

Hi There,
Have you tried to search for "Administrative Tools" and run the "Windows Server Backup" from there?
Good Luck

Urgent help needed to setup Forms 6i Server on Windows Server 2003

Hello,
I am trying to install Forms 6i Server from the Forms/Reports 6i Release 2 CD onto a server with Windows Server 2003 Standard Editon (services pack 1) installed.
The Oracle Installer produced the following error when I tried to install the Forms 6i Server From the Forms/Reports 6i Release 2 CD:
user1.pin(20); os_error while spawning ifsrv60 -install forms60server port=9000 mode=socket batch=yes.
Has anyone successfully installed Forms 6i Server from Forms/Reports 6i Release 2 CD onto a Windows Server 2003 server?
Any help is appreciated.
Phil

You it obtained to install the FORMS 6i SERVER in Windows 2003 ?
I am with the same problem and not yet I obtained solution.

I am unable to create pdf using adobe printer to a redirected folder on a server running windows server 2003

I am unable to create pdf using adobe printer to a redirected folder on a server running windows server 2003

In the app-server-ant.xml file, as indiacted in the error message i am getting, at line 145 it is suppose to get the path to \bin\asadmin.bat from the value of a paramater called 'asadmin'. This value is being set in the beginning of the file.
The parameter value of 'asadmin' is further referring to value of another parameter called 'javaee.home' which is being set in tut-install/javaeetutorial5/examples/bp-project/build.properties
I have checked the values of both these parameters and they are set correctly, so since it is still giving me problems, at line 145 i hard coded the path instead of the parameter name:
I replaced line
<exec executable="${asadmin}" failonerror="${failonerror}" dir="${javaee.home}">
with
<exec executable="c:/sun/appserver/bin/asadmin.bat" failonerror="${failonerror}" dir="${javaee.home}">
This works.

Error when configuring Siebel Server in Windows server 2003

Hi
I am getting below error when configuring Siebel server in Windows server 2003 VM. All the ODBC connections and SADMIN user id & password and gateway host name and port everything correct. Able to ping and telnet to gateway port 2320. Please help on how to overcome this situation....
2021 2012-03-08 01:13:22 0000-00-00 00:00:00 -0500 00000000 001 003f 0001 09 sw_cfg_util 3940 3332 C:\sba81\siebsrvr\log\sw_cfg_util.log 8.1.1 SIA [21111] ENU
GenericLog     GenericError     1     000000024f580f64:0     2012-03-08 01:13:22     Error in transferring input values ,num of arrays incorrect 0, expected : 1
GenericLog     GenericError     1     000000024f580f64:0     2012-03-08 01:13:22     TransferInputsToValues returned error:3611539 to SetControlValues
GenericLog     GenericError     1     000000024f58096c:0     2012-03-08 01:13:33     NSS - ErrCode 4597527 SysErr 0
GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     NSS - ErrCode 4597527 SysErr 0
GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     Validation failed : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸     ֓呸     ֓㷕粃Ꞡ粈㶻粃
GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     ValidateFailed for Gateway Name Server TCP/IP Port, error : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸     ֓呸     ֓㷕粃Ꞡ粈㶻粃

Please check Doc ID 1391312.1 on support.oracle.com, this article has a list of possible causes and resolutions for the error messages you are receiving.
Hope it helps,
Wilson

Windows server 2012 as primary DC and DNS server and windows server 2003 as secondary DC and DNS

Migration from windows server 2003 AD DC and DNS server to windows server 2012 R2,
Cannot I set up Windows server 2012 R2 as primary DC and DNS , windows server 2003 as secondary DC and DNS ? (for backup server when server 2012 fail, user can continue to login and access internet services)

You can mix both as long as your Forest and Domain Functional level are Windows Server 2003. However, I would like to bring your attention to this blog about known problems when mixing DCs with Windows Server 2003 and 2012 R2 OS:
http://blogs.technet.com/b/askds/archive/2014/07/23/it-turns-out-that-weird-things-can-happen-when-you-mix-windows-server-2003-and-windows-server-2012-r2-domain-controllers.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

How to Migrate windows 2008r2 RDS server to Windows server 2012r2 RDS

Hi, I want to migrate our 2008r2 RD server + Cals to windows server 2012r2 server, the user will still connect to 2008r2 server but the server hosting the license will be migrated to a 2012r2 server. Currently I have 2 servers that users can connect
to that are served by the 2008r2 RDS (the server I'm converting is just hosting the license) the server user connect to point to this license server. How do I proceed to migrate, I'm searching for documentation but I can't find much, I found that I can only
convert to 2012r2 from 2012 or better OS, so I installing a temporary 2012 server to do a double migration seem to be the best course of action but I can't find any documentation on how to Migrate the Remote Desktop Services Role Services from 2008r2 to Windows
Server 2012.
Also I just discovered that this server is also hosting license for windows server 2003 terminal service. Will I be able to host these licences on 2012R2 ?
Any pointer would be appreciated.

Hi,
It seems like migration the Remote Desktop Services Role Services from 2008r2 to Windows Server 2012 is not supported.
http://technet.microsoft.com/library/dn479239.aspx
So i think you may install and configure the RDS server on Windows Server 2012 and then migration to Windows Server 2012r2.
Hope this helps.
Regards.
Vivian Wang

Integrate On-Premises Exchange Server With Windows Server Essentials

I have Exchange Server 2013 installed on Win Server 2012 R2 joined to Windows Server Essentials domain. Attempting to integrate the Exchange Server into the Essentials domain from the Essentials Dashboard using the wizard fails with the error, "Cannot
locate an Exchange Server on the network. Make sure that your Exchange Server is setup and that it is connected to the network". I can communicate with the server in multiple ways from the Essentials Server and other computers on the domain. Mail
flow in and out of the Exchange Server works without issue. I can use the various management tools to administer the Exchange Server. The only task I cannot complete is integrating it into the Essentials environment which I need to do to move on
to creating user mailboxes for user accounts setup in AD.
All research to date has come up empty handed.
Help!

Hi RSUL,
Any update?
On current situation, would you please let me confirm something more? It may help me to understand this issue
clearly.
Would you please let me know how join the Windows Server 2012 R2 (which had been installed Exchange Server 2013) to Windows Server Essentials domain? Did use Connector software
(type http://servername/connect)?
On server essentials, please open Dashboard and navigate to DEVICES. Then check the Status of this server which had been installed Exchange Server 2013.
Currently, the Services Integration features, including on-premises Exchange integration, are only supported in a single domain controller environment. Meanwhile, the integration
wizard must be run on a domain controller.
In addition, please refer to the following article and check if can help you.
On
Premises Exchange Integration Windows Server 2012 Essentials
Integrate an On-Premises Exchange Server
with Windows Server Essentials
By the way, please check Event Viewer and some relevant logs if you can find some more clues.
Hope this helps.
Best regards,
Justin Gu

Cannot restart SQL Server Agent - SQL Server 2008 Express

Hi
I don't know if this affected it but we had a auto notification to change our work passwords the other day, I then couldn't get my local SQL express to logon using domain login.
I then went into SQL Server Config Mgr. and both SQL Server Express and SQL Server Agent were stopped. I tried to restart but no luck, so went into properties of SQL Server Express and remapped my domain name (domain\name) and new password and it started,
but agent will not start.I also checked log paths in registry match my log paths in system and went to:
C:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL
Where a few of the folders I didn't have permission but it asked me to confirm I want permission when I dbl clicked on them.
When I try to start agent I get error:
the request failed or the service did not respond in a timely fashion
Whatever that means I don't really know.
Here is contents of SQL Agent file from log:
2014-06-11 10:05:56 - ? [100] Microsoft SQLServerAgent version 10.0.1600.22 (x86 unicode retail build) : Process ID 2756
2014-06-11 10:05:56 - ? [101] SQL Server DC102084\SQLEXPRESS version 10.00.1600 (0 connection limit)
2014-06-11 10:05:56 - ? [102] SQL Server ODBC driver version 10.00.1600
2014-06-11 10:05:56 - ? [103] NetLib being used by driver is DBNETLIB.DLL; Local host server is XXXXXXXX\SQLEXPRESS
2014-06-11 10:05:56 - ? [310] 2 processor(s) and 1931 MB RAM detected
2014-06-11 10:05:56 - ? [339] Local computer is XXXXXXXX running Windows NT 6.1 (7601) Service Pack 1
2014-06-11 10:05:56 - ! [000] This installation of SQL Server Agent is disabled. The edition of SQL Server that installed this service does not support SQL Server Agent.
2014-06-11 10:05:56 - ? [098] SQLServerAgent terminated (normally)
And some details from Error log:
2014-06-11 09:55:49.11 spid51      Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install.
2014-06-11 09:55:49.11 spid51      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'SQLEXPRESS'.
2014-06-11 09:57:49.15 spid51      Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install.
2014-06-11 09:57:49.15 spid51      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'SQLEXPRESS'.
2014-06-11 09:57:49.19 spid51      Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install.
2014-06-11 09:57:49.19 spid51      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'SQLEXPRESS'.
2014-06-11 10:05:56.09 spid51      Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install.
2014-06-11 10:05:56.09 spid51      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'SQLEXPRESS'.
2014-06-11 10:05:56.23 spid51      Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install.
2014-06-11 10:05:56.23 spid51      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'SQLEXPRESS'.
Any suggestions would be warmly welcomed
Many thanks
Andrew

SQL Server Express and SQL Server Agent were stopped
Hello Andrew,
With SQL Server 2008 Express the "SQL Server Agent" is installed as well, but it's not a supported Feature of the Express Edition, therefore you can't start / use the Agent.
See
Features Supported by the Editions of SQL Server 2008 => "Management Tools" => SQL Server Agent
Olaf Helper
[ Blog] [ Xing] [ MVP]

How to install external DNS Server on Windows server 2008?

After 2 days hard working I'm confused about DNS servers.
i registered a domain name and want to host my own DNS for my website.
i install DNS Role and IIS on a windows server 2008 R2 and config them all and set 127.0.0.1 and 8.8.8.8 on my network interface on my serve .
on my server i have 2 website
dns1.mysite.com //to set it on my domain panel as name server
mysite.com //hosting
now everything work on my server , when i type mysite.com at my web browser i can see my site.and when i ping mysite.com it reply my server static ip.
but on internet it does not work. i mean if you type dns1.mysite.com or mysite.com not works and i got request time out when i ping theme.
at this state if you set my server IP as DNS server at your network adapter(interface) everything work great.
how can i have a DNS Server like that hosting using on our domains like dns1.godaddy.com ?
i should register my DNS on any where like a organization or website or...?

For the local nic you should _always_ configure dns servers that have the same scope. I think 8.8.8.8 and 127.0.0.1 will never have the same scope. Note that the configuration of multiple dns servers is only there for failover purposes. If the first one
is working, the second one is never used.
You should create a zone on your dns server matching your domain, and you should request your registrar to make your server authorative over your zone. Some providers let you configure this yourself (on a weninterface), so please consult the documentation
provided by the service provider/registrar. If in doubt, they will be the primary contact point as the required configuration depends on theirs.
Note that when you want to host a public dns server, the server should be reachable from the internet on port 53 tcp/udp and you should follow guidelines for serrver security very strictly.
Also be aware updates on dns servers need some time to be applied worldwide due to caching that has to expire and zone transfers that might be needed. be patient.
MCP/MCSA/MCTS/MCITP
Thanks SenneVL for your nice answer .
my server IP is static and reachable from Internet,then why when you add my server ip on your network adapter as a DNS it works and you can type mysite.com on your browser and see my site?
you said "Also be aware updates on dns servers need some time to be applied worldwide due to caching that has to expire and zone transfers that might be needed. be patient."
how long it takes?

CSA 6.0 Server Agent & Windows Server 2008

Similar Messages

Maybe you are looking for