CSa and MS Exchange

In the CSA Whitepaper the list there being a Pre Canned Policy for Exchange, however I don't see this listed in my lists of policies. Does anyone have any recommendations for what policy elements should be included for a Exchange 2003 installation
Thanks

True there should be a pre-canned policy for Exchange but I don't have an MC infront of me and I can;t check it. two things you can do. First I would make sure I have the pre-release of 4.5, it has many advantages obver 4.0(x). In 4.5 you can do a search on policies with the name "exchange", you will probably find ms exchange in an application class and have several policies using that class. If this odes come up blank you can run a machine with MS Exchange in test mode and use the wizard to create you own polices, it's a pretty straight forward task. I would however look through the application classes first.

Similar Messages

CSA and Exchange Server

My Exchange Admin is getting antsy about CSA on Exchange servers. Has anyone successfully implemented CSA on an Exchange server? There are no built in policies I can find in 5.2, did you have to do a lot of custom rule writing?

You can run the CSA agent on the Exchange servers; but the CSA Management Console should be installed on a separate stand alone box. Following link may help you
http://www.cisco.com/en/US/docs/security/security_management/cs-mars/5.3/user/guide/local_controller/cfgidsh.html

I have 4 email accounts in apple Mail. My mail is sending from the wrong account. even on "reply" it sends from a different account. I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from a

I have 4 email accounts in apple Mail. My mail is sending from the wrong account. even on "reply" it sends from a different account. I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from the same gmail account. Help.

I HAD two accounts because of this problem. I completely removed the problem account from the Apple Mail client. Guess what is happening?? That's right - Mail is still sending from the other account that no longer exists on my computer, and I have absolutely no idea how this is happening. This is incredibly frustrating. When a recipient chooses to reply to my message, quite often I won't get it now because it is going to the other account that has now been deleted from my system. COME ON APPLE!!! WHAT'S THE DEAL WITH THIS???

I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

This - https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default - didn't work?

MAJOR PROBLEMS WITH IPHONE 3G AND MICROSOFT EXCHANGE!!!! PLEASE HELP!!!!

Ok,
My exchange server at work was synced to my iphone and has worked with no issues. I then exchanged my phone because there were issues with my bluetooth not syncing properly. So with this new phone, it prompts me to enter in my exchange server password every few days. I contacted my IT department as well and microsoft to get this issue resolved because I assume that there were issues with the exchange server. They were both able to see an event viewer and it showed that my iphone was attempting to log in numerous amounts of times, which locks out my account after 3 incorrect log ins. Even when I erased the exchange account from my phone, it still showed that the phone in the event viewer was trying to log in over and over again. I then did a master clear and restore and the process was removed in the event viewer. So then I called my IT department to unlock my account after I cleared everything. I was able to sync everything again with it working properly. Now its a day later and the my exchanger server prompts me to enter in the password AGAIN and my exchange account is locked AGAIN because the event viewer at work is showing the same issues. Is my Iphone not saving the password correctly? What do I do? My IT department even created a dummy account to see if a new account would fix the issues but yet no cigar! HELP!!

The iPhone you returned is still syncing against your server and locking out your account. Someone possibly has access to your mail data. I'd recommend having your Exchange Administrator install the Microsoft Exchange Server ActiveSync Web Administration Tool (http://www.microsoft.com/downloads/details.aspx?FamilyID=E6851D23-D145-4DBF-A2CC -E0B4C6301453&displaylang=en) and attempt to wipe/delete/block that other iPhone.
Message was edited by: ethanm

UCCX 8.0.2 Unable to logon CSA and CSD

Hi Guys,
I am not able to logon CSA and CSD. Is appear the message:
"A licensing error has occurred. Please try again in five minutes. If the problem persists, please see your log file or System Administrator for details"
then: License server down
In the logs appear the messages:
ERROR DESK3109 Could not obtain license from LRM.
ERROR DESK3113 Unknown exception while releasing the license(s)
I disable firewall Windows, but, didn´t solved
I disable csa in UCCX (utils csa disable), but, didn´t solved (Disable SYN FLOOD within Cisco Security Agent UCCX)
http://docwiki.cisco.com/wiki/Agent_receives_a_licensing_error_message_when_attempting_to_start_Cisco_Agent_Desktop
I verified the link below and didn´t solved too:
https://supportforums.cisco.com/document/24896/cad-login-fails-licensing-error#comment-10407376
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-contact-center-express/46882-license-error.html
https://communities.cisco.com/message/69357
Another idea about this?
Thanks,
Wilson

Hi Bala,
Follow the command. I believe that the space is normal.
This command can take significantly long time,
and can also effect the system wide IOWAIT on your system.
Continue (y/n)?y
Filesystem            Size Used Avail Use% Mounted on
/dev/sda6              90G   46G   41G 54% /common
8.0K    /var/log/inactive/
admin:
admin:
admin:show diskusage activelog
This command can take significantly long time,
and can also effect the system wide IOWAIT on your system.
Continue (y/n)?y
Filesystem            Size Used Avail Use% Mounted on
/dev/sda6              90G   46G   41G 54% /common
8.0K    /var/log/active/mgetty
0       /var/log/active/sa
4.0K    /var/log/active/platform/snmp/sappagt/sappagt.index
4.0K    /var/log/active/platform/snmp/sappagt/sappagt.log
4.0K    /var/log/active/platform/snmp/sappagt/startup.txt
16K     /var/log/active/platform/snmp/sappagt
4.0K    /var/log/active/platform/snmp/hostagt/hostagt.index
Thanks,
Wilson

Suggestion for Pricing Type and Pricing Exchange Rate Type

Dear All,
Good Day,
what would be your recommendation to maintain Pricing type and Pricing exchange rate type for below process.
1. Invocie.
2. Cancellation of Invoice.
3. Return Invoice.
4. Credit Note.
5. litigious Invoice.
Best Regards,
KSK

Thanks sam,
I have configured the same but now problem is Billing Header Exchange rate is not changing. Because of that Accounting document also doesn't have new exchange rate,.
1. Is there any another config needs to be maintain.
Example:
Sale order Exchange rate              10.45           Order date : 01.11.2008
Billing Header Exchange Rate         10.45           Billing date : 05.11.2008
Billing Line item Exchange Rate      11.00           Billing date : 05.11.2008 base on VTFL Config
Account Document Exchange Rate 10.45          Posting date : 05.11.2008 because of Billing Header exchange Rate
I need Accounting document also to carry New exchange rate 11.00 . suggest me.
Best Regards,
KSK

How can i split Client Network traffic and My exchange traffic with two differnet ip address?

Hello Everyone
sorry for my bad English and also my bad explaine
here is my network looks like
all the client on one subnet and network is 192.168.0.0
i have Dsl router that connect to Tmg server
i have Tmg with two NIC
1-192.168.0.4
2- 2 Public Ip address
i want to do this
i want to split user's traffic and my exchange traffic
i mean i want to route user's traffic with one public ip addresss
and my exchange server's traffic with another public address
but when i add additional ip address at Tmg or create new NIC card
all of my traffic route with one public ip Address what should i do?

Hi Uhan,
You need to use ENAT fuction on TMG to achive this
On the External NIC assing the Second IP as Additionl IP address (VIP)
Create a network Rule to NAT traffice From Exchange server IP address to the required Public IP which you need the E NAT.
Ensure you are creating rule only from Exchange server IP and not all INternal.
Look at the below Doc you step by step config
http://www.isaserver.org/articles-tutorials/configuration-general/Configuring-One-to-One-NAT-TMG-2010.html

Difference between EAS(Exchange activesync) and EWS(Exchange web service)

What are the main differrences between EAS(Exchange activesync) and EWS(Exchange web service)...
I know the basic difference
that is EAS(Exchange activesync) is a set of protocol
and EWS(Exchange web service) is a web service....
Please explain me the difference

Hi MangeshDD,
Some other information for you:
Understanding Exchange Web Services Virtual Directories
If you still have other confused points, please feel free let us know.
Regards!
Gavin
TechNet Community Support

How to install and configure Exchange Server 2010 DR (disaster recovery) on Windows server 2012.

We need to install and configure Exchange Server 2010 with DR(disaster recovery on Server 2012.
Pls suggest step by step.
Pankaj Kumar

Hi,
Here is an article which may help you for your reference.
Deploying High Availability and Site Resilience
https://technet.microsoft.com/en-us/library/dd638129(v=exchg.141).aspx
Besides, there is a related thread here.
https://social.technet.microsoft.com/Forums/exchange/en-US/577c9433-a20b-442e-8ce7-be59aea35855/preparation-for-deploying-exchange-2010-servers-at-remote-site-dr-site?forum=exchangesvrdeploylegacy
Hope this is helpful to you.
Best regards,
Belinda Ma
TechNet Community Support

I have an all contacts list and an exchange contact list how do i sync them into 1 list(my exchange list)

I have an all contacts list and an exchange contact list how do i sync them into 1 list(my exchange list. I want to only use my exchange list but i don't know how to put the other contacts from all contacts or contacts into my exchange list??

Can any user with similar problem or IPhone developers give a remedial suggestion please?

MI and MS Exchange

Does MI work with MS Exchange? If so what is the synchronization technology? References to any diagrams, documents, or experts would be very helpful.
Thanks
Oz

Hello Oz,
AFAIK there is no direct relationship between MI and MS Exchange. The Handheld Device can use Active Sync to synchronize with the Users Outlook. Outlook can be connected to the MS Exchange Server. Active Sync is then also be used to make the Connection to the MI Server.
Regards
Gregor

New Outlook 2013 Installation - How to configure for default pop email and access exchange 2003 server for shared folders only

I have successfully installed and configured outlook 2013 to access my pop.integra.net email accounts. We have an 2003 exchange server we use for shared folders which I am having difficulty accessing.
My preference would be to set up my access to the exchange server and use the same data folders for email as are in use for my pop email account. In outlook 2003 this was simple, but in 2007 on up it seems this feature has been hobbled. Is there
a workaround to get both accounts to use the same database?
Next issue is if I use the Mail client wizard under Control Panel to set up access to the exchange server - everything looks fine but when launching outlook I receive the following 2 error messages:
"The resource that you are trying to use is located on an unsupported version of Microsoft Exchange. Contact your e-mail administrator for assistance."
"Cannot start Microsoft Outlook. Cannot open the Outlook window. The set of folders cannot be opened. Your Microsoft Exchange administrator has blocked the version of Outlook that your are using. Contact your administrator for assistance."
Obviously the optimal solution is to upgrade the Exchange Server - assuming that is not an option - are there any workarounds?
Any assistance would be appreciated.

Downgraded to Office 2007.
So now have a new Windows 8.1 laptop with outlook 2007 installed.
From what I have been told this should allow me to connect to the Exchange2003 server
I set up the pop account - works fine
set up the exchange account through Mail.exe and am unable to launch outlook.
"Microsoft Exchange is Unavailable"
"Retry - Work Offline - Cancel"
Then
"Cannot start Microsoft Office Outlook. Cannot open the Outlook Window. The set of folders cannot be opened. The information store could not be opened."
The data file path is the same for both the pop account and the exchange account:
C:\Users\Scott\app data\local\microsoft\outlook\outlook.pst
How do I get this to work?
Help!

CSA and Deny CMD.EXE

Hi,
I am new to CSA and have been trying to figure out how to block the Windows cmd.exe process outright? Is anyoneableto assist or point me in the right direction
thanks?

No, you should never change the built-in ruleset unless needed, in this case, you need to create a Policy, a rule module, and add an application control rule with the info i gave you. You attach the policy to the group that your hosts are in, the rule module to the policy, and generate. Just be carefull, CSA is a very powerful tool, and rules can have massive impact in your setup if you are not careful. Try it out on one machine first, this can be done be creating a group and assigning the new policy you just created to that, and then add that group to the host.

Help on Direct and Indirect Exchange Rate formula

Dear Experts,
As per subject, can anyone write the formula of how both "direct" and "indirect" exchange rate calculation works in SAP B1?
Warmest Regards,
Chinho

Hi Chinho,
Direct: X units of local currency (LC) = 1 unit of foreign currency (FC)
Indirect: 1 unit of LC = X units of FC
Therefore, considert his example:
LC = EUR
FC = GBP
GBP Rate is set as 1.23
Document total = GBP 10.00
GBP 10.00 = EUR 12.30 when using the 'Direct Method' (1.23 EUR = 1 GBP)
GBP 10.00 = EUR 8.13 when using the 'Indirect Method' (1 EUR = 1.23 GBP)
All the best,
Kerstin

CSa and MS Exchange

Similar Messages

Maybe you are looking for