CSA and Windows Server 2008 hangs

We're having a problem where we install CSA 6.0.2.130 on a Windows 2008 server running IIS and the server hangs after login. Screen goes blank, mouse pointer is there but the system is unresponsive. It is possible to start Task Manager and it shows almost all services stopped (but CSA running). Stopping CSA service returns function to the server. However, after all the services have started, if we try to start the CSA, then the server hangs again.
Looking in the CSA log files doesn't show anything major. There are some references to the management center being not reachable but they resolve themselves.
Any ideas where to look? We've tried disabling A/V, reinstalling, etc.

This sounds potentially like bug CSCtg98849. There is a workaround that should allow you to continue running with CSA enabled:
Edit the "Base - Digital Signing of Downloaded Executables" rule module and disable the file access control "Send downloaded executables for scanning if opened for read".
Save the change.
Generate rules and deploy to affected hosts.
[Wrap text] [Edit this enclosure]
Release-note: Modified 06/02/2010 07:41:44 by scfringe
[Unwrap text] [Edit this enclosure]
Release-note: Modified 06/02/2010 07:41:44 by scfringe
Scott

Similar Messages

Lms 3.2 and window server 2008 r2 standard

we have bought lms 3.2 and window server 2008 r2 standard. Now we know, it cant be used togetther
Could we upgrade to lms 4.0.1 ? If so, how can we do ?
thank you.
Duyen.

Correct, LMS 3.2 is not supported on Windows 2008 R2. You can upgrade to LMS 4.0 (which is supported on R2), but that is not a free upgrade from LMS 3.x. You can, however, download a free 90-day eval of LMS 4.0 from http://www.cisco.com/go/nmsevals .
It sounds like you need to contact your reseller or account manager to see what they can do. If you just purchased LMS 3.2, you may be able to get a free or discounted upgrade to 4.0.

Lms 3.2 and window server 2008 standard: License Server/Daemon Manager is down

LMS 3.2 and window server 2008 standard, get error when we try
Khi truy nhập vào menu chức năng:
License Server/Daemon Manager is down. Please check license.log for more information.
access licensing:
Error communicating with License Server. License Server may be down. Please start the License Server, then refresh the page.
Lincense.txt is file log of LMS
Must I have to active window server 2008 first ?
thank you very much ?

Hi ,
--Add the Casuser to the Administrator Group
and then reset the casuser password:
1. Go to CSCOpx\setup\support> and run the following command:
resetCasuser.exe
2. Restart the daemon manager:
Net stop crmdmgtd
Net start crmdmgtd
Let me know how it works
If above did not help then send me the syslog.log and screen shot of the EventViewer with the latest Application Error that you see there.
--also screen shot of the below directory :
NMSROOT\etc\license
Thanks
Afroj

Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit SSO

Hi,
     I try to setup SSO on Cisco NAC 4.8 and Windows Server 2008 Enterprise 64bit, but I can't start Active Directory SSO Service that show error follow below. I saw this error " KDC has no support for encryption type (14)" . Could anyone help me to troubleshoot this problem?
FQDN: active.test.com
Domain Name : test.com
User : ccasso
2011-02-05 12:00:30.225 +0700 WARN com.perfigo.wlan.jmx.adsso.GSSServer
- Server was not running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server starting server ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Server is now running ...
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - SPN : [ccasso/[email protected]]
2011-02-05 12:00:30.225 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - done building kdc list for domain active.test.com
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - KDC(s) :[10.0.240.100]
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: writing to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - writeKrbFile: wrote to file ../conf/krb.txt
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - creating login context ...
2011-02-05 12:00:40.224 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- GSSServer - created login context ...javax.security.auth.login.LoginCon
text@5ad7b2
2011-02-05 12:00:40.239 +0700 ERROR com.perfigo.wlan.jmx.adsso.GSSServer
- Unable to start server ... KDC has no support for encryption type (14)
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- Notifying GSSServer status Stopped
2011-02-05 12:00:50.244 +0700 INFO com.perfigo.wlan.jmx.adsso.GSSServer
- server is exiting .

Hi,
This error means that your DC does not support the encryption method the ACS wants to use.
Usually this happens when you run 2008 Server with 2003 functionality...
You will need to run ktpass.exe according to the DC you are running:
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cas/s_adsso.html#wp1277452.
For Windows 2008 Server at 2003 Server functional level:
ktpass -princ newadsso/[adserver.][email protected] -mapuser newadsso -pass
PasswordText -out c:\newadsso.keytab -ptype KRB5_NT_PRINCIPAL
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Is there a 32 Bit edition available for windows server 2012 and windows server 2008

Dear All,
Is there a 32 Bit edition available for windows server 2012 and windows server 2008?
Regards,
Ahmed

Hi,
Quote：
All editions of Windows Server 2008 R2 are 64-bit only.
Reference link below(session Supported upgrade paths):
https://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
And based on MS official description about system requirement for Windows Server 2012/2012 R2, we may find out that they only has 64 bit OS.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Compatibility forms 6i and Windows Server 2008

Hi,
We want to change our Server from 2003 to Windows Server 2008 64bits.
My question is : is there a compatibility between Oracle forms 6i (our application) and Windows Server 2008 ?
Will the migration be successfull, or will we have some bugs?
Thks for your help.
O.

YES. It worked perfectly for me, you'll have to use oracle 8/8i lite though.

T-500 and Windows Server 2008 R2 RTM

My setup:
T-500 dual booting via VHD - Windows 7 and Windows Server 2008 R2 (both 64-bit).
My problem:
I'm having a devil of a time with this one. I get random BSOD'd in my Server 2008 R2 installation, but my Win7 install is rock solid. Sometimes it's right away, sometimes after a few minutes, sometimes when trying to use WordPad. I cannot get my wireless card (Intel 5100 AGN) to work along with video drivers for my ATI card, so I'm leaning towards a driver issue. I'm trying to use the Win7 drivers for anything that's missing drivers at the moment, since they are the same under the hood, so to speak.
Has anyone else experimented with this setup and/or run into similar problems? Thanks!
T500: T9400 (2.53GHz), 4GB RAM, 160GB 7200rpm, 15.4in 1680x1050 WSXGA+ LCD, 256MB ATI Radeon HD3650, DVDRW, Intel 802.11agn wireless, AT&T WWAN, Bluetooth, Modem, 1Gb Ethernet, 9c Li-Ion, Windows 7 Ultimate x64 RC (Build 7100)

You shouldn't have any big issues, but there are a couple of gotchas that Server versions of Windows have (a notable one is the Bluetooth stack). Those are somewhat detailed in the review, though (and that blog also details how to get other features of Server 2008 R2 running).

Windows Server 2008 hangs in "Applying computer settings" after installing Sharepoint 2010

Hi!
I have a server which is designated to be a Sharepoint server, I have successfully installed the server, SQL server R2 and Sharepoint 2010, but right after Sharepoint Server 2010 is installed the nex time I reboot the machine it hangs in "Applying computer
settings" I have tried reinstalling the server several times, improving the server specs.
The installations run just fine I can even see the sharepoint site, and make any configuration, the issue comes when I restart the server (for updates for example..)
Can someone help me with this issue?
Thanks in advance
Carlos R Vargas M

Hi,
It may take some time for configuration after the new installation. Please wait patiently. If it still hangs, please refer to the following article:
KB article 2379016
A computer that is running Windows Vista or Windows Server 2008 stops responding at the "Applying User Settings" stage of the logon process.
http://support.microsoft.com/kb/2379016
Tim Quan

Driver for Deskjet 1220c (Windows 7 x64 and Windows Server 2008 R2)

Hi,
I've got a Deskjet 1220c and have recently upgraded two machines; one to Windows 7 Ultimate x64 and the other to Windows Server 2008 R2. Any idea where I can get printer drivers?
I'd like to try the Vista x64 drivers, though these were included on the Vista CD from MS, and not available as a separate download from HP (http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00868762).
I'd be grateful for any suggestions.
Thanks,
Mt

Hi
I had this trobule too. Below is the instructions to install driver. Disconnect your printer. In printers select add printer. Then click windows update (need internet) allow them to update and then select 1220c printer to install leaving as standard old port. Once installed go into printer properites and update to USB port.
Bingo it works!
Refer to the below link for full instructions.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796821&tmp_track_link=ot_recdoc/c01874792/en_...
Good luck
RB

Window SBS server 2008 and window server 2008 R2 on the same domain

Hi all,
I am a person only work for linux system. Recently i work for my company that using microsoft technologie. So i have a lot of trouble. Could you please help me and below are my big troble that i have met:
In my system, i have the first window SBS server 2008 run on our domain. However my organization growth up and we have more than 150 users and mailbox of exchange server 2007. So i do not want to use my sbs server 2008 anymore.
I am going to install a window server 2008 R2 64 bit and join it into the same domain with sbs server 2008. It will be replicate the username, dns, OU and group policy...After that i will tranfer FSMO role to new server and i will demote then remove the
sbs server.
My boss say that i should not use this solution because window server sbs can not run with any other kinds of window server 2008 (R2, standard, enterprise...) and it will automatically shutdown the main server after a couple of days.
Someone have experience can help me. I am so confuse now

Maybe this will also help to better understand the steps involved:
Transition from Small Business Server to Standard Windows Server
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
Migrating away from SBS 2011
http://social.technet.microsoft.com/Forums/en-US/07c58cc4-7d6d-419a-b1a0-439c2cc0c48d/migrating-away-from-sbs-2011?forum=smallbusinessserver
Migrating from SBS 2008 to Windows Server 2012 R2 (NOT Essentials and with NO Exchange)
http://social.technet.microsoft.com/Forums/en-US/1276d2d3-a8f2-4786-82f3-4308a2affb11/migrating-from-sbs-2008-to-windows-server-2012-r2-not-essentials-and-with-no-exchange?forum=smallbusinessserver
And remember, as long as you don't move the PDC to one of the new DCs, you can leave the SBS 2008 up indefinitely. But I would remove Exchange 2007 off it right away once I've migrated the mailboxes and public folders, otherwise
you will get yourself into an Exchange coexistence scenario which is much more complex to configure and support because of the CAS differences, changing the URLs on the old one to "legacy.domain.com," getting a new UC/SAN cert with the correct
names on it, and more. Believe me, you really don't want to coexist them. The only time I've coexisted Exchange versions is during large migrations, such as 500 or more. Otherwise, I just migrate the mailboxes over a weekend and get it done with.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Oracle XE 11g and Windows Server 2008 - 64 bits

Hello,
my questions are :
- is Oracle XE working on 64 bits (windows)
- if it doesn't :
- is an update coming ?
- is there any solution to make Oracle XE running with Win2008 Server 64 bits (i tried, but i had many problems with execution of listener)
Thx for your informations.

Hello, and welcome to the OTN forums!
You could have used the search forum to find answers to these frequently asked questions...
However, I give you a short intro:
- is Oracle XE working on 64 bits (windows)There is no general answer to that question. As you've found out, there is no installer for 64bit Windows. As for 32bit, there are several Windows versions that are listed in the [url http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm#BABHICJH]System Requirements section of the XE Installation Guide, and a few you won't find there, e.g. Vista or Home Editions. This means you'll probably experience problems when trying to install on any OS version not listed there. Some of them might be worked around, others may not.
Since your target is Windows Server 2008 (edition?), you might get a more precise answer when you search for that.
- is an update coming ?See {thread:id=2277728} .
In addition to that, {thread:id=2278170} contains an overview for the state of all operating systems.
- is there any solution to make Oracle XE running with Win2008 Server 64 bits (i tried, but i had many problems with execution of listener)The safest way would be to use a VM with a supported operating system.
-Udo

SQL Server plug in and windows server 2008

Windows Server 2008
SQL Server 2008
JDBC drivers 3.0
I am trying to setup Oracle Grid to monitor the SQL Server instances and ive resolved most of the issues execpt i keep getting the following error when testing connection to SQL server
Warning
Failed to contact the target to be added. Following errors were received while testing the connection to the target. Update the properties accordingly, try Test Connection for testing the properties before saving.
1. MSSQLDetermineName_DynamicProperty - em_error=Could not connect. Error code = 0x8004100e em_error=Failed while connecting to WMI.
2. Response - Missing Properties : [provided_sql_server_name]
Ive read about the code and it says add the Microsoft namespace to WMI but then it says it only applies to SQL Server 2000.
These are my jdbc settigs:
jdbc url: jdbc:sqlserver://<servername>:1433
jdbc driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
History:
i was getting other errors before regarding wrong version of SQL Server installed so i downloaded the JDBC 3.0 drivers and copied the 2 files:
sqljdbc.jar and sqljdbcr4.jar
to <oracle_agent_home>\sysman\admin\scripts\emx\microsoft_sqlserver_database
after this i got the current problems
I think it may be a permissions problem with WMI or something connected around it.

Please review the installation documentation at:
* http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e16546/sqlig.htm
You will see that the sqljdbc_auth.dll needs to be copied only if you are using Windows Integrated Authentication on a 64 bit OS:
For the plug-in to establish connection to SQL Server instance using Windows Integrated Authentication mode, when deployed on a 64-bit (X64 or IA64) copy of Enterprise Manager Agent running on 64-bit Windows operating system, do the following:
Depending on the JVM version, copy the respective version of sqljdbc_auth.dll to the folder $AgentHome\sysman\jdbcdriver. If the directory does not exist, create it. The file sqljdbc_auth.dll is available as part of Type 4 Microsoft SQL Server 2005 JDBC Driver version 1.2 (after unzipping, you will find three files with same name, that is, auth\x86\sqljdbc_auth.dll, auth\x64\sqljdbc_auth.dll, and auth\ia64\sqljdbc_auth.dll)
o
For X64 version of Enterprise Manager Agent installed on X64 (Xeon or AMD) Windows systems, copy the file auth\x64\sqljdbc_auth.dll to $AgentHome\sysman\jdbcdriver (the dll file should be copied directly under the folder specified. No sub-directories should be created.)
o
For IA64 version of Enterprise Manager Agent installed on IA64 Windows systems, copy the file auth\ia64\sqljdbc_auth.dll to $AgentHome\sysman\jdbcdriver
Note:
· No manual step needs to be performed when the plug-in is deployed on 32-bit copy of Enterprise Manager Agent (running on 32-bit or 64-bit Windows).

Powershell 4.0 on Windows 7 and Windows Server 2008 R2

I have installed .Net Framework 4.5.1, and Powershell 4.0, and having some issues with some cmdlets; primarily dealing with scheduled tasks. Is Get-ScheduledTask available when Powershell 4.0 running on Windows 7 or Windows Server 2008 r2? I
can't seem to find the module to import, and no modules with schedule in their name shows up with running Get-Module -listavailable.
thanks.
DJ

Hi,
No, those cmdlets are only available on WS2012+ or W8+.
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

ITunes and Windows Server 2008 (32-bit Enterprise)?

I tried installing iTunes 7.2 and 7.6.1 on my 32-bit Windows Server 2008 testing machine.
It seems that 7.2 (with the standalone Quicktime 7.1.6 installed first) installed without any problem, but 7.6.1 seems that it cannot install some components (such as bonjour).

yksoft1 wrote:
I tried installing iTunes 7.2 and 7.6.1 on my 32-bit Windows Server 2008 testing machine.
It seems that 7.2 (with the standalone Quicktime 7.1.6 installed first) installed without any problem, but 7.6.1 seems that it cannot install some components (such as bonjour).
iTunes is only supported on Windows XP SP2 and Vista (32 and 64 bit)
It is not supported on server versions of windows.

.chm on Windows Server 2008 hangs on a hyperlink to an embedded .xls file

This link has not caused problems on Windows XP, Windows 7, and Windows Server 2003. On Windows Server 2008, if a user attempts to go to the link he gets the option to open or save the file. Either option causes an "application crash". The .xls is actually contained within the .chm.
Is there a security setting we need to know about?

CHMs themselves are not intended to work on a server, as described in http://www.grainge.org/pages/authoring/chm_mspatch/896358.htm
Maybe Microsoft have extended the security but I have not seen anything reported here.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

CSA and Windows Server 2008 hangs

Similar Messages

Maybe you are looking for