CSA : Do CSA keep the allowed events with exported policies.

I've created a server Group on a CSA-MC.
There are 2 sites, and all events on the first CSA (1st Site) will be the same on the second Site. Because the applications on each server are the same. Only the IP address change. (redundancy)
First, the group is in learning mode, and there is no policy defined.
So all event are allowed.
Question :
After the learning mode, I want to export the group and import this group in the second site.
Do CSA keep all allowed events that have been discovered in the 1st Site.
Best regards.
Antra

The Export utility exports entire rule modules and policies (not individual rules), including the accompanying application classes and configuration variables. Because of communication channels established in the original configuration, some site-specific imported configuration information (IP addresses) may not work on another server. Exporting an item will also export related data. In particular, exporting policies will export application classes and configuration variables referenced in rules within the policy. Exporting a group will export associated policies but not hosts. The Export/Import functions are not intended to be used as a backup/restore mechanism as they do not preserve system specific information such as group-host memberships

Similar Messages

Can I keep the classic look with OS X ?

I need to switch from OS 9.0.4 to OS X (because the film scanner that I'm gonna buy required OS X)
but I love the metallic appearance (Classic) of OS 9.0.4
It's simple, clean.
Can I keep the classic look with OS X ?
I know it comes with a different look (and from what I saw I hate it !) I want a computer, not a toy for a kid with "lots of colors and big shiny buttons..that look like a candy.... yeaahh!
I want the new technology but not the new look.
The new look seems so crowded
Now a stupid question:
does the X have a desktop like OS 9 :meaning an empty space where you can put 50 files or just a few ?
Or is it like a open files ?
In wikipedia they show an image of the OS 9.0.4 desktop (which look exactly like what I have) then they show an image of the OS X
http://en.wikipedia.org/wiki/Image:Xcodescreenshot.png
and it looks like a open folder. Perhaps they are comparing apples (ha funny !) with oranges but if I were them, I would show 2 desktops (or 2 open files ) not one desktop for OS 9 and something else for OS X
Maybe it is silly to ask but you never know.
I like to see my folders and files present on the desktop. Otherwise it looks like a open folder with View-->List instead of View--> icons.
Hey I said it is a stupid question !!

Hi Michael,
"lots of colors and big shiny buttons..that look like a candy.... yeaahh!"Not sure why you say this unless you were looking at the Widgets screen? The Mac OS X is "brushed metal" for the most part.
does the X have a desktop like OS 9 :meaning an empty space where you can put 50 files or just a few ?Yes.
In wikipedia they show an image of the OS 9.0.4 desktop (which look exactly like what I have) then they show an image of the OS XThat's not it. This is it minus any open windows.
I like to see my folders and files present on the desktop. Otherwise it looks like a open folder with View-->List instead of View--> icons.OS X also has "column view" and IMO is much faster to navigate through your files and folders.
You'll get over OS 9
-mj
[email protected]

My album artwork is scrambled and manually changing the artwork does not seem to keep the right artwork with the songs! Any suggestions?

I manually re-synced my ipod with all of my music because I had typed in a bunch of names where my library had previously said track#/unknown album, and when I was done syncing, a good percentage of the album art was scrambled. When I try to manually change the artwork on the inappropriately tagged albums or delete and re-sync the album, it does not keep the artwork that I assign to it or the correct artwork that is associated with it in itunes. Is there anything I can do to fix this?

It seems like I've seen this... I think you should un-sync all music (in iTunes) hit Apply and then resync it all back on.

Keeping the library small with vaults

Still waiting for the Apple Store to get the first shipment of 1.1. They have no idea when that would be.
I do mostly model shooting and once I'm done with the images I will burn them to DVD and get them off my computer. Only a few will remain which will be used for my book and web.
So the question is:
After a shoot I create a vault with the latest shoot, burn it to a DVD. If I remove the vault from Apreture, will that keep the library to a manageable size?
By naming the vault with the models name and date I will remember what's on the DVD. Is there anything else I need to keep in mind?

I do mostly model shooting and once I'm done with the
images I will burn them to DVD and get them off my
computer...
So the question is:
After a shoot I create a vault with the latest shoot,
burn it to a DVD. If I remove the vault from
Apreture, will that keep the library to a manageable
size?
By naming the vault with the models name and date I
will remember what's on the DVD. Is there anything
else I need to keep in mind?
I think you are confusing the vault with the Aperture capability to export projects. Sounds like you want to use the export projects capability to burn your DVDs. Then you can remove them from your Aperture library and re-import the project from DVD whenever you want to work with them again.
I'm pretty sure that each time you restore a vault, it replaces THE ENTIRE Aperture library, so using multiple, project oriented vaults as your backup scheme is a recipe for disaster. Also, if you are going the DVD export route, I'd strongly recommend you export two copies of the project before deleting the files from aperture. So you have a backup and a backup-backup. Can't be too careful with your digital assets.
Mike
PowerMac G5 Dual 2.0GHz, Radeon X800XT Graphics Card; MacBookPro 2.0Ghz Mac OS X (10.4.6) iMac800 and Powerbook G4 also in household

Get Info "Change All" button doesn't keep the proper "Open With" app

I have a small but annoying problem that appears in Leopard 10.5.2 (been there since original 10.5.0 install) that I have tried to troubleshoot but can't solve.
The problem is:
-With some of my file types, the wrong "Open With" application is displayed when I view a Get Info for that file type. So to fix this, I open a Get Info window on one of those types of files, and choose the PROPER default application in the "Open With" slot. This works, and then the new proper application name now shows in that slot. So then I click the "Change All" button and apply to all files of that file type. I receive the warning that I will be changing ALL files of that type. I choose "continue" because that is what I desire.
However, once I do that, (click Change All, then Continue button), the old, wrong application name jumps back the Open With slot! So the new, correct application choice doesn't "stick".
Oddly enough, it sort of DOES work, because if I then re-click in the Open With slot, although the old, the wrong application is back listed again, if I look up above that name, then my actual desired application is listed in a list, and it has the word (Default) beside it.
So if I do actually now double click any file of that type, then the proper application DOES launch and open the file.
But why does the Get Info window still display the wrong, non-default application in Open With? And furthermore, this causes all file types of that kind, to display the WRONG icon in any Finder window. They of course display, the icon of what is in the Open With slot list.
I am having this problem only with two file types and apps. (Cubase and Pro Tools---DAW audio apps). All of my Cubase files display a Pro Tools icon, and show as Open With: "Pro Tools" when of course it should display Open With: Cubase. As stated in the Open With list, Cubase is indeed there among other programs and it has the word (Default) beside it. So it sort of works when launching files. But I still cannot get Cubase to "stick" and stay in Open With after Change All!
Can anyone offer any tips on what might cause this and what fix is needed?
Thanks so much in advance!
Wade

Well, I tried rebuilding the Launch services with the command listed but still no luck. After having no luck with that and deleting caches, etc....I also, went to my home (user) directory and in Preferences, I deleted the com.apple.launchservices.plist file. I restarted and checked and still the same result.
Also, I want to emphasize again that the file type I am discussing DOES actually launch with the correct application. (Cubase files in my example).
But it is just annoying that ALL of my Cubase files display the Pro Tools application icon, and in Get Info they are listed to open with Pro Tools. But they actually do launch Cubase if double clicked.
And one other VITAL note....if I open Get Info for one of these files, and change the Open With from Pro Tools to Cubase....then that choice DOES "stick" and retain. (if I "don't" also click Change All)
It's only when I click "Change All" that it DOESN'T stick and the list selection jumps back to Pro Tools. I hope that may offer some clarity.
Thanks for the tips but I am still back at square one.
Wade

How to keep the same URL with a redesigned website

I have completely redesigned my muse website and want to replace the old one which is already live. How do I go about doing so and keeping the same URL?

Hi
You can upload the site to root which would replace the existing one.
http://helpx.adobe.com/muse/topics/exporting-publishing.html
Thanks,
Sanjit

How the PCUI event for export button works?

Hi All,
After get the order search result in PCUI, when I click the Export button.
It show me the message that : Microsoft office 2003 or higher is not installed on your computer.
In fact, I have the office 2003. And I found that the event for Export button is PCF_DL_EXPORT.

Have you tried double-clicking on the auto complete component in the designer? You should be taken to a method like "autocomplete1_complete". This method is called when the autocomplete gets focus and also for each character typed in the field.
Cheers!
-David

Iam using 2 different i phones on the same itunes account, Can I keep the contacts seperate with syncing?

I have one itunes account and am using 2 iphones, is it possible to keep all the "contacts" seperate from the two devices, so that I dont have to have all of my husbands contacts in the phone book? Or do I have to use 2 different itune accounts?

Your contacts are not part of your iTunes library. iTunes only syncs contacts with your phone from a supported program such as Outlook or mac Address Book. If you are trying to sync you contacts to the same program they will be merged. You could, however, set up two contact groups within Outlook, one for your contacts and one for his. Both groups would still besynced to both devices but you wouldn't have to look at the contact group you weren't interested in. Another option would be for one of you to continue to sync with iTunes with, for example, Outlook and the other sync contacts with another service such as Google or iCloud (be sure to uncheck Sync Contacts on the Info tab of the the iTunes sync settings for this phone).

How can i get popup blocker to keep the allowed sites that i add?

Here where I work, we have a site that opens in a popup window. I have added it to the popup exceptions list, but after a day or so, that site disappears from that allowed site list. Not sure what keeps going on. It's been doing this for a while, even on previous versions. The browser is on the most current version, 33.0, just FYI.
Any assistance would be greatly appreciated. Thank you.

Can you find a pattern to the disappearance? For example:
# Every time you exit Firefox it is cleared?
# Every time to shut down and restart Windows it is cleared?
# It is cleared on a schedule?
For #1, make sure Firefox is not set to clear too much history at shutdown.
"3-bar" menu button (or Tools menu) > Options > Privacy
If you have "Firefox will: Remember history" then there shouldn't be a problem. If you have "Firefox will: Use custom settings for history" then make sure "Clear history when Firefox closes" is NOT checked, or if it is checked, click the Settings button and make sure that Site Preferences are NOT set to be cleared.
For #2 and #3, utility, privacy and system cleaning software sometimes clean up browser settings beyond just clearing cookies. You may need to check their settings if you have one or more of these programs.

Director MX 2004: How to keep the text layout with printomatic

Hi,
I' using printomatic 1.7.3.0 and when I print the content of
a text
member, all the parameters of the text disappear (bold,
size..).
Is there a way to avoid this ?
Thank you in advance.

Hi JB,
Thanks for your anwser. Your second strategy sounds good,
but how should
I proceed to mulitply the height of my text member (x2 ou
x4). I tried the
following:
member(x).width = member(x).width*2
member(x).height = member(x).height*2
... but as you know, it only works for the width.
Thank you again for your help !
"JB" <[email protected]> a �crit dans le
message de news:
[email protected]..
> As I recall the simple printomatic printMember command
uses the image of
> a text member, which should be preserving the styling,
using the
> member().text extracts unformatted text, but does allow
printomatic to
> print at full printer resolution, unlike a text member
bitmap image.
>
> 2 Strategies:
>
>
> Create a text parcer that reads the font, style, size of
individual
> words in the text memer, converting the info to
printomatic
> layout/formating form.
>
> Have an off stage scaled up version of the text member,
whose image is
> sent to printomatic, the xtra crunches pixels together
when images are
> scaled down on page, so feeding it a 2x or 4x size text
member image
> make the effective print resolution 150 or 300 dpi.
> THe easiest case is where all the text is the same point
size, a
> standardize prepareForPrint routine should be able to
create a copy of
> the member, scale up the font size and the width of the
member rect so
> the appearance of the line wrap points is preserved,

How do I keep the original size when exporting?

I have people sending me photos to edit. I work a little in photoshop cs4 and then back in lightroom 3, but when I go to send them the photos back ,they are HUGE! How can I send them the same size file they sent me? (the ones I am currently working on are tiff. files.)

If you are editing tif files, then you have only a couple of choices.
Flatten the image before you save it. This will reduce it down to one layer. That's the smallest you can get.
When you first open the image, look to see if it's 8 bit or 16 bit tif. It won't help you, but if the image is 8 bit, and you save it as 16 bit, you will have dramatically increased the size of the file for nothing. If it's started as 16, no worries!
check if you are saving with compression. Tif compression is lossless, so unless you did something like resize+resample, it remains the same bit density, etc, so should be just as printable as what they sent you (unless you messed up!).
Cheers!

How do I keep the date/time when exporting photos?

When exporting photos from Photos.app on my Mac, it doesn't use the metadata that it displays in Photos--it uses the current date/time. So when I export a photo from 2010, it says it's dated 2015 when I import it into Aperture.
Is there a way to export an image with its original timestamp? Is this a bug? Thanks.

If you are editing tif files, then you have only a couple of choices.
Flatten the image before you save it. This will reduce it down to one layer. That's the smallest you can get.
When you first open the image, look to see if it's 8 bit or 16 bit tif. It won't help you, but if the image is 8 bit, and you save it as 16 bit, you will have dramatically increased the size of the file for nothing. If it's started as 16, no worries!
check if you are saving with compression. Tif compression is lossless, so unless you did something like resize+resample, it remains the same bit density, etc, so should be just as printable as what they sent you (unless you messed up!).
Cheers!

Exported video size smaller than original video size. How do I keep the original size?

I exporting a video from Adobe Premiere CS6 today, and I noticed the video was about 1/2 times smaller than the original video I put in. I then uploaded the video on YouTube, and the size was still the same. I tried to change the preset to 1080p 29.97, 1080p 25, etc. and the same with 720p, and 480p, but the size only changed slightly.
How do I keep the original size after exportation of videos?

More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
Also, exactly what are you editing, and what are your export settings?
Also, The tutorial list in message #3 http://forums.adobe.com/message/2276578 may help

Click event with modifiers

Hello,
I'm trying to select multiple lines of a matrix clicking on any fields of a row. I can capture the event of the click and select the line clicked, but I'm not able to select multiple lines that way. I need to select the lines with modifiers in mind. I can make a click in the first column to select the line too, but I don't know how to perform a click with modifiers.
Thanks in advance

I think this is not what Martin needs, but simulate a click with modifiers.
We have the same problem. The matrix selection mode is BoMatrixSelect.ms_Auto. What we want to do is that when any column is clicked, it will behave as it was clicked on firts column (the one that is able to select rows). The problem is that Shift or Control button could be pressed too, which should select more rows than the clicked one. We know how to handle the click event with modifiers, but we don´t know how to send a click on the first column with them.
We haven´t found any solution to this.
Regards,
Ibai Peñ

Time events with errors

Hi,
Whether I can delete the entire error pool list?
Since 2003, the post processing errors were still exists. These errors can be ignored. In the "Time Events with Errors: Postprocessing" screen, I have an option to delete a single batch process errors. I couldn't find an option to delete an entire pool list. ie,, to delete batch process from 2003 to 12/2007.
Is there a way to do mass delete?
Please share your experience with me. Thanks.
Best Regards,
Bala

Hi,
Actually I want to delete those errors, which was generated while POSTing time events.
We have a clock interface, from there we poll a clock-in and out time for all employees and then this will be uploaded to SAP, then its posted to TIMEVENT. While Posting, if there is error, it stores in transp. table CC1ERH and CC1ERP. I need to delete these entries. Is there any standard report available to delete old records?
Thanks and Regards,
Bala

CSA : Do CSA keep the allowed events with exported policies.

Similar Messages

Maybe you are looking for