CSA on Other Operating Systems

When does Cisco plan to have a CSA client for other operating systems like SuSe 10 desktop and OES server?
Also, when will they have a client for 64-bit windows architecture? (64-bit may only seem like the buzz word of the moment, but with all future [Microsoft/Novell/SUN/Linux]Server technology coming out 64-bit it makes me nervous when in my environment is mandated to have CSA on all machines including Servers.)
Does Cisco have a client in development for additional operating systems?

There are QFS drivers for linux client support, not sure about windows.

Similar Messages

  • Creating .app folders in other operating systems?

    I'm working on a cross-platform game and am hoping to create an OS X port of it. I don't have access to a mac, and so am unable to use the xcode tool for creating .app folders. Are there any tools for creating .app folders on other operating systems? I'd prefer Linux, but can also use windows if required.
    Thanks
    Nathaniel

    Well, .app bundles are specific to Cocoa and Carbon applications... The closest way to make such applications is to use GNUStep (which is an open Cocoa) but it means to rebuild the whole app to make it work with Cocoa/GNUStep...
    However, application that are compatible with Mac OS X are not necessarily in .app bundles. Bundles are used for a specific purpose which gather files that the app should have really close, like its interface files (nib) that is used only with Cocoa or Carbon. If your app is neither Carbon nor Cocoa, there's no use in creating a .app bundle it doesn't even exist. And moreover, Xcode (or Project Builder on GNUStep) is the only app that creates .app bundles.

  • I have 10.6 8 Sno Leopard and trying to download yosemite by it keeps failing.  Are there other operating systems in between that need to be installed first?

    I have 10.6 8 Snow Leopard and trying to download yosemite by it keeps failing.  Are there other operating systems in between that need to be installed first?

    Before embarking on a major OS upgrade, it would be wise, advisable and very prudent if you backup your current system to an external connected and Mac formatted Flash drive OR externally connected USB, Thunderbolt or FireWire 800, Mac formatted hard drive. Then, use either OS X Time Machine app to backup your entire system to the external drive OR purchase, install and use a data cloning app, like CarbonCopyCloner or SuperDuper, to make an exact and bootable copy (clone) of your entire Mac's internal hard drive. This step is really needed in case something goes wrong with the install of the new OS or you simply do not like the new OS, you have a very easy way/procedure to return your Mac to its former working state.
    Then, determine if your Mac meets ALL minimum system install requirements.
    To install OS X  10.8 Mountain Lion, 10.9 Mavericks (free upgrade, but currently unavailable) or OS X 10.10 Yosemite (currently available free upgrade) you need one of these Macs:
    OS X 10.8 Mountain Lion purchased emailed download code here.
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later),
    MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    Your Mac also needs:
    OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
    2 GB or more of memory (I strongly advise, at least, 4 GBs of RAM or more)
    8 GB or more of available space
    Next,
    If you run any older Mac software from the earlier PowerPC Macs, then none of this software will work with the newer OS X versions (10.7 and onward). OS X Snow Leopard had a magical and invisible PowerPC emulation application, called Rosetta, that worked seamlessly in the background that still allowed older PowerPC coded software to still operate in a Intel CPU Mac.
    The use of Rosetta ended with OS X Snow Leopard as the Rosetta application was licensed to Apple, from a software company called Transitive, which got bought out, I believe, by IBM and Appe  could no longer secure their rights to continue to use Rosetta in later versions of OS X.
    So, you would need to check to see if you have software on your Mac that maybe older than, say, 2006 or older.
    Also, check for app compatibilty  here.
    http://roaringapps.com/
    If you have any commercial antivirus installed and/or hard drive cleaning apps installed on your Mac, like MacKeeper, CleanMyMac, TuneUpMyMac, MacCleanse, etc. now would be a good time to completely uninstall this apps by doing a Google search to learn how to properly uninstall these types of apps.
    These types of apps will only cause your Mac issues later after the install of the new OS X version and you will have to completely uninstall these types of apps later.
    Once you have determined all of this, you should be able to find the latest versions of OS X by clicking on the Mac App Store icon in the OS X Dock and then login to the Mac App Store using your Apple ID and password and if you purchased a download code, input that code.
    You can then begin the download and installation process of installing the newer versions of OS X from the Mac App Store.

  • Is it okay to upgrade from os x 10.6.8 to yosemity without first getting the other operating systems?

    is it okay to upgrade from os x 10.6.8 to yosemity without first getting the other operating systems?

    Hey there jpenilla,
    Welcome to Apple Support Communities.
    Yes. The webpage below provides the answer to your question, about upgrading to Yosemite from OS X Snow Leopard (v10.6.8), and it provides additional information that you may find helpful.
    Apple - OS X Yosemite - How to Upgrade
    You can upgrade to OS X Yosemite from the following:
    OS X Snow Leopard (v10.6.8)
    OS X Lion (v10.7)
    OS X Mountain Lion (v10.8)
    OS X Mavericks (v10.9)
    So long,
    -Jason

  • Does Time Machine track changes to disks made by other operating systems?

    I run 10.8 Mountain Lion on my main partition but also occassionally boot to a copy of 10.7 Lion on a separate partition in order to run a version of Quickbooks for Mac that isn't supported in 10.8.  Time machine is only turned on in 10.8 and backs up all internal disks and partitions when I'm logged into that operating system.  My question is does time machine in 10.8 notice changes made to any of the internal disks made by me while I was booted into 10.7 Lion?
    Occassionally I reboot into 10.7 Lion to run Quickbooks for Mac 2011, do work, make changes to files, ect.  When I log back into 10.8 Mountain Lion and Time Machine does it's normal back up thing, does it recognize changes that were made to internal disks, folders, and files that were made when I was previously booted into 10.7 Lion?  Or does Time Machine in 10.8 Mountain Lion only recognize changes that are made when it's running?
    Thanks Peeps!
    ben

    When I log back into 10.8 Mountain Lion and Time Machine does it's normal back up thing, does it recognize changes that were made to internal disks, folders, and files that were made when I was previously booted into 10.7 Lion?
    Yes.

  • File Permissions on Oracle Directories for other Operating System Users

    Hi,
    I am trying to export the table data to flat file using a pl/sql function using UTL_FILE package and directories created using 'CREATE DIRECTORY' command. The function is called from a stored procedure which in-turn is called from a Java program using JDBC and the Java process runs as different operating system user. The problem for me is the file exported is being written as 'ORACLE' user with 'OINSTALL' group and '-rw-r--r--' linux file permissions. When I try to read this exported file from the java program it throws me a file access error.
    I would like to know if we can specify any additional parameters either in
    1) Database parameter file
    2) UTIL_FILE.FOPEN function
    3) CREATE DIRECTORY command
    so that the files written to the DIRECTORY have a read write access.

    Since you attempting to read the file from Java, you are constrained by the OS.
    Write a stored proc to read the file, since PL/SQL does have the correct permissions to read/write to files.
    P;

  • Rescue and Recovery Capability to recover other operating systems

    Hello Folks, 
    I have a question regarding R&R. I have a thinkpad T520 running windows 7. It came with a 500GB hdd and I allocated 50GB of that to a Linux system. I bought a 1 TB HDD and would like to replace the one inside, and this brings me to my question;
    *Does the R&R tool take a complete image of  my hdd, meaning if I was to recover my backup to a new hdd, would I be able to access my Linux installation and all the files in that partition as well, or is it specific to the windows system only. 
    *If the above is indeed not possible, is there a way to change my settings on R&R to do it or do I have to resort to another paid 3rd party software to do that for me. 
    Please help as I can't afford to lose anything on the Linux system as I need it for research. 
    Thanks in advance,
    Solomon

    Hello and welcome,
    I can't answer directly so apologies for crashing your thread.  I'd be very surprised if R&R recognized anything but windows-flavored partitions.  I don't have one of my old multi-boot ThinkPads at hand to test or I would.
    IIRC backup is one of the reasons I finally gave up on multi-boot and went to a pure Windows setup running Linux and Solaris as virtual machines.  It makes for a very simple backup process.
    Having said that, I actually use Acronis for backup. It can handle multi-OS backups but in my experience I always had to repair the Linux partition after a restore.
    Is the virtual machine approach something that would work for you?  If not you might use one of the Linux backup approaches to save that partition separately.
    Regards,
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Can I have access to partition of the other operating system?

    Hi everyone,
    I have Windows 8.1 installed through the Bootcamp. I gave a limited 56 GB space to the Windows partition and now I want to have access to some files that I have in MacOS drive. Is it possible to have access to those files? I am looking for a way to be able use the files in both partitions no matter which operating system is up in the computer.
    Thanks in advance.

    Of course. Moreover, Apple includes a driver inside the Boot Camp drivers you have to install in Windows that allows you to read your OS X volume in Windows. If you have not installed those drivers, look for your computer's model and your Windows version in this website to download the proper drivers -> Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support
    After downloading the drivers (I suppose you are doing it in Windows), just open the downloaded file and run the installer.
    However, note that the driver is read-only, so you will not be able to write in the OS X volume. Instead, I would recommend you to copy the files you need to modify from the OS X volume to the Windows one, so then you can move them to the OS X volume once you have booted up in OS X.

  • Problems with a bluetooth mouse and others operating systems

    Hello, I have an error related to bluetooth devices.
    I have on my Mac mini apart from Mountain Lion, a Linux distribution.
    Steps to follow to find the error:
    1. - Connect a bluetooth mouse to Mountain Lion and set it up.
    2. - Reset the mini, start with Linux and also configure the mouse.
    Now the mouse works fine on Mountain Lion and Linux.
    Start again with Mountain Lion, you will see that the mouse does not work, but the system has added and configured.
    That mistake I've seen for the first time in Snow Leopard, Lion has continued and now with Mountain Lion.
    The only way to fix it is to connect a USB mouse, remove the Bluetooth mouse and add it again.
    The configuration fails again when using the mouse in Linux.
    Tested on another Mac (Mac-Pro) with the same result.
    (I tested it with a Dell BT Travel Mouse and a Magic Mouse)
    Regards

    First, excuse my poor english
    It's not offend, but I understand that at the time that Linux is off, and OSX is on, is OSX which is not able to work with the mouse.
    I do not know what is the reason for which the operating system is not able to operate the mouse, even if it is paired and authorized.
    The system also says that the mouse is working properly, when it is obvious that it is not.
    Moreover, the Bluetooth preference pane is completely slowed and functioning incorrectly.
    And finally, to comment that the mouse works properly on Linux after having done in OSX ..., which shows that the problem is OSX.
    If I open this post is for someone to try and investigate.
    Would be nice if Apple released a patch as it is clear that something is not working well in OSX.
    What I did not expect was to listen that having a Linux through the middle, there is no problem.
    regards

  • MBP 17" does no longer boot from CD or my two other operating systems

    Hi there,
    I have an MBP on which I have 3 OSs installed: OS/X, Win7 64 and Ubuntu 10.10; I select between them with rEFIt.
    Earlier today while working in WIndows, the screen went completely blank as if the machine shut itself off. I then tried to reboot into Windows and after selecting it from rEFIt, it never booted again.
    For testing purposes, I tried to boot into Ubuntu, and nothing happened - the screen stayed blank.
    Finally, I tried to boot from a Ubuntu Live CD, but nothing happens, the screen stays blank.
    Mind you, though - OS/X boots just fine and everything works normal. I can access the Windows partition just fine from OS/X, so nothing got deleted there.
    Any idea what this is and how to fix it?
    Thank you!
    Rainer

    I don't know how much help I'll be to you. Seems to have a lot of posts lately about not being able to start up from the install disks.
    I assume you can still boot up from the internal drive.
    When you hold the option key to start, does the screen come up with the option to choose a startup disk and is your Install Disk in when you attempt this?
    While booted up normally, does the Install Disk open up with the install OSX menu? If so, does going through the install menu reboot the computer from the CD automatically?
    Even if there were a firmware upgrade, seems like you would be able to use the 10.6 Install Disk to boot from.

  • Why do u inhabit truecaller from showing non saved contacts as other operating systems

    I have a truecaller app but it don't show names for unsaved no. When they calls as I was used in Samsung for example and when I asked the apps co. They told me that apple don't allow them to do..so please could u guys manage this

    No, we can't.
    User to user forum, no Apple here.
    Try googling for apple feedback.
    Just because Android ignores user security and privacy, Apple should not.

  • Installing Solaris 9 with other Operating Systems x86

    Hi, I am new to Solaris world. I want to install solaris 9 on my home computer on which I've already installed Windows XP and RedHat Linux 9. I have a few questions regarding the installation process.
    (a) Is a primary partition necessary for installing Solaris 9 (I have only one primary partition and free space in extended partition)? Is there a way to boot Solaris 9 from a logical drive in the extended partition?
    (b) Will choosing the default option on the Solaris installation fdisk screen erase my previous partitions?
    I will appreciate if anybody care to answer.

    hi sulemankm
    solaris needs a primary partition, booting from a logical drive won't work.
    for very detailed information take a look at
    http://multiboot.solaris-x86.org/
    hth
    jenny

  • Power Manager and other operating systems

    I'm looking to run Linux on my T410.  I currently have my power manager in windows set to charger my battery to a max of 70% and start when it is below 60%.  I did this because I'm usually plugged in (If I'm not the laptop is asleep or I'm not using it for too long so the loss of battery time isn't that important) and I would like to preserve as much battery life as I can.  My question is, how are these settings saved, and if I were using Ubuntu, how could I keep my battery charging like this.  I didn't see any settings in Ubuntu to only have my battery charge to 70%, so I don't know what to do.

    The settings will be written to a chip in the battery while "Shut down" the computer (but not "Restart"). So the values should be kept while using Linux. But i don't know the behavior of the charging values at shutting down Linux.
    My home-forum: http://www.thinkpad-forum.de
    Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
    My ThinkPad-Collection

  • Other Operating Systems

    I'm interested in putting together a poll on what other OS versions Archers use.
    But before I put together the poll, I'm looking for a list of what people are using or have used  both at home and at work besides Arch.
    Home: SuSE, RedHat, Windows.
    Work: AIX, Solaris, SuSE, RedHat, Fedora, HPUX.

    Home:
    laptop - Arch, Win XP. Always using Arch, kept win XP in case I need it for something.
    old box - Win 95, old Debian. I don't use it. Toooo slowwww ( 16 MB of RAM )
    SGI Indy - no OS yet. Was thinking about Gentoo MIPS...
    School:
    my workstation - SunOS
    servers - SunOS, Linux (Red Hat), IRIX, Linux (SGI with Itanium 2 cpus), NEC

  • Linux broke wireless in other operating systems

    I don't know how, I had it working fine for a week in all my OS's. I was trying to get my wifi to auto connect at boot in arch and now all of a sudden my wifi will only work in Arch, and will not work in 7 or OSX.
    Last edited by vahnx (2010-08-29 13:40:30)

    It was a flaw I made in Arch. I managed to solve it although I'm unsure how. All I remember was in Arch I ran my scripts like normal to start my wireless, only I ended up with two WICD instances. I killed one and left terminal running the other, then I ctrl+c'd the final WICD instance before rebooting. Went into Windows and all was well. I assume wifi will also work in OS X now too.
    Last edited by vahnx (2010-08-29 16:21:07)

Maybe you are looking for