CSCsg96938 - Cat4K PoE cards may exhibit PWR OVER persistently if damaged
Hi,
i am getting below mentioned logs on my cisco WS-C4506 (MPC8245) processor (revision 4) with 524288K bytes of memory.
%C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Inline power exceeds threshold: Module status changed to 'Pwr Over'
%C4K_IOSMODPORTMAN-6-INLINEPOWEROK: Inline power within limits: Module status changed to 'Ok'
%C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 5 (WS-X4548-GB-RJ45V S/N: JAE11452M2E Hw: 3.3) is online
%C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Inline power exceeds threshold: Module status changed to 'Pwr Over'
%C4K_IOSMODPORTMAN-6-INLINEPOWEROK: Inline power within limits: Module status changed to 'Ok'
%C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 5 (WS-X4548-GB-RJ45V S/N: JAE11452M2E Hw: 3.3) is online
The Module 5 (WS-X4548-GB-RJ45V) providing the power to all connected PoE devices without reporting any issue with user.
current version: cat4000-i9s-mz.122-25.EWA14.bin || Compiled Tue 20-May-08 18:49 by chendah ||
------------------ show power detail ------------------
Power Fan Inline
Supply Model No Type Status Sensor Status
PS1 PWR-C45-2800AC AC 2800W good good good
PS2 PWR-C45-2800AC AC 2800W good good good
Power supplies needed by system : 1
Power supplies currently available : 2
Power Summary Maximum
(in Watts) Used Available
System Power (12V) 320 1360
Inline Power (-50V) 163 1400
Backplane Power (3.3V) 0 40
Total 483 2800
Watts Used of System Power (12V)
Mod Model currently out of reset in reset
1 WS-X4516 150 150 150
4 WS-X4548-GB-RJ45V 60 60 20
5 WS-X4548-GB-RJ45V 60 60 20
-- Fan Tray 50 -- --
Total 320 270 190
Watts used of Chassis Inline Power (-50V)
Inline Power Admin Inline Power Oper
Mod Model PS Device PS Device Efficiency
1 WS-X4516 - - - - -
4 WS-X4548-GB-RJ45V 95 85 39 35 89
5 WS-X4548-GB-RJ45V 68 61 34 30 89
Total 163 146 73 65
Please help me to identify this bug id for this , since it's seem a ios problems only.
Did you read the release note? The bug you mention only affects the DC power supplies. Looks like you have an AC supply.
It is probably worth opening a TAC case on this issue, in case it is hardware related.
Similar Messages
-
Hi NetPro,
anyone knows this ?
i have no any device using PoE, but i still have this error.
Nov 1 07:53:07: %C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Inline power exceeds threshold: Module status changed to 'Pwr Over'
Nov 1 17:51:13: %C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Inline power exceeds threshold: Module status changed to 'Pwr Over'
Nov 2 10:18:26: %C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Inline power exceeds threshold: Module status changed to 'Pwr Over
M MAC addresses Hw Fw Sw Status
--+--------------------------------+---+------------+----------------+---------
1 000f.2390.5840 to 000f.2390.5841 2.1 12.1(20r)EW1 12.2(20)EWA Ok
2 000f.2472.ad10 to 000f.2472.ad3f 2.0 Pwr Over
3 000f.2472.e6a0 to 000f.2472.e6cf 2.0 Ok
4 000f.2472.ef70 to 000f.2472.ef9f 2.0 Pwr Over
5 000f.2472.a620 to 000f.2472.a64f 2.0 Ok
6 000f.2472.a5f0 to 000f.2472.a61f 2.0 Ok
Power Fan Inline
Supply Model No Type Status Sensor Status
PS1 PWR-C45-2800AC AC 2800W good good good
PS2 PWR-C45-2800AC AC 2800W good good good
Power supplies needed by system : 1
Power supplies currently available : 2
Power Summary Maximum
(in Watts) Used Available
System Power (12V) 485 1360
Inline Power (-50V) 0 1400
Backplane Power (3.3V) 0 40
Total 485 2800
Watts Used of System Power (12V)
Mod Model currently out of reset in reset
1 WS-X4013+ 110 110 110
2 WS-X4248-RJ45V 65 65 25
3 WS-X4248-RJ45V 65 65 25
4 WS-X4248-RJ45V 65 65 25
5 WS-X4248-RJ45V 65 65 25
6 WS-X4248-RJ45V 65 65 25
-- Fan Tray 50 -- --
Total 485 435 235
Watts used of Chassis Inline Power (-50V)
Inline Power Admin Inline Power Oper
Mod Model PS Device PS Device Efficiency
1 WS-X4013+ - - - - -
2 WS-X4248-RJ45V 0 0 11 10 89
3 WS-X4248-RJ45V 0 0 22 20 89
4 WS-X4248-RJ45V 0 0 28 25 89
5 WS-X4248-RJ45V 0 0 28 25 89
6 WS-X4248-RJ45V 0 0 22 20 89
Total 0 0 111 100
your reply will be highly appreciated.
thanks,
Regards,
JackalHi,
What you are experiencing is documented in Bug ID CSCef49715. Please refer the below URL for details:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/25ewa/system/message/emsg.html
I hope it helps.
Regards,
Arul
** Please rate all helpful posts ** -
Catalyst 4506 and Modules in Pwr Over state
Hello,
First of all, my excuses for my bad english.
I am experiencing a problem with a Cisco Catalyst 4506.
The switch is filled with 48 port PoE blades (WS-X4248-RJ45V).
The error we receive is:
Sept 5 15:40:12: %C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Inline power exceeds threshold: Module status changed to 'Pwr Over'
Sept 5 16:37:04: %C4K_IOSMODPORTMAN-6-INLINEPOWEROK: Inline power within limits: Module status changed to 'Ok'
Sept 5 16:37:04: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 6 (WS-X4248-RJ45V S/N: JAB080609GN Hw: 2.0) is online
According to the Cisco website:
Explanation
This message indicates that the measured PoE is at least 50 w higher than the configured value. The switch has either misconfigured PoE or an unauthorized powered device that is connected to the switch and is drawing a lot of PoE.
Out put for the commands sh power details and sh module all are attached.
The switch has no PoE devices on the specific blade.
Atleast not that we know.
Does any one know some other solution?
Thanks in advance.
Martijn GroenleerWell, blade six went offline on the first row of the log i posted earlier.
The problem is, the log doesn't mention in the message which module went offline.
About the 'efficiency' i noticed this also, what could be causing this? Power supplies are already replaced. PoE is on default settings currently.
A full log related to these power over warnings:
Aug 30 23:27:00: %C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Inline power exceeds threshold: Module status changed to 'Pwr Over'
Aug 30 23:39:34: %C4K_IOSMODPORTMAN-6-INLINEPOWEROK: Inline power within limits: Module status changed to 'Ok'
Aug 30 23:39:34: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 6 (WS-X4248-RJ45V S/N: JAB080609GN Hw: 2.0) is online
Sep 3 08:45:46: %C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Inline power exceeds threshold: Module status changed to 'Pwr Over'
Sep 3 08:57:49: %C4K_IOSMODPORTMAN-6-INLINEPOWEROK: Inline power within limits: Module status changed to 'Ok'
Sep 3 08:57:49: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 6 (WS-X4248-RJ45V S/N: JAB080609GN Hw: 2.0) is online
Sep 4 01:53:04: %C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Inline power exceeds threshold: Module status changed to 'Pwr Over'
Sep 4 02:23:16: %C4K_IOSMODPORTMAN-6-INLINEPOWEROK: Inline power within limits: Module status changed to 'Ok'
Sep 4 02:23:16: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 6 (WS-X4248-RJ45V S/N: JAB080609GN Hw: 2.0) is online
Sep 4 16:10:58: %C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Inline power exceeds threshold: Module status changed to 'Pwr Over'
Sep 4 17:20:23: %C4K_IOSMODPORTMAN-6-INLINEPOWEROK: Inline power within limits: Module status changed to 'Ok'
Sep 4 17:20:23: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 6 (WS-X4248-RJ45V S/N: JAB080609GN Hw: 2.0) is online
Sep 4 17:58:14: %C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Inline power exceeds threshold: Module status changed to 'Pwr Over'
Sep 4 18:09:37: %C4K_IOSMODPORTMAN-6-INLINEPOWEROK: Inline power within limits: Module status changed to 'Ok'
Sep 4 18:09:37: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 6 (WS-X4248-RJ45V S/N: JAB080609GN Hw: 2.0) is online
Sep 4 19:13:15: %C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Inline power exceeds threshold: Module status changed to 'Pwr Over'
Sep 4 19:56:11: %C4K_IOSMODPORTMAN-6-INLINEPOWEROK: Inline power within limits: Module status changed to 'Ok'
Sep 4 19:56:11: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 6 (WS-X4248-RJ45V S/N: JAB080609GN Hw: 2.0) is online
Sep 5 09:02:16: %C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Inline power exceeds threshold: Module status changed to 'Pwr Over'
Sep 5 09:10:46: %C4K_IOSMODPORTMAN-6-INLINEPOWEROK: Inline power within limits: Module status changed to 'Ok'
Sep 5 09:10:46: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 6 (WS-X4248-RJ45V S/N: JAB080609GN Hw: 2.0) is online
Sep 5 15:40:12: %C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Inline power exceeds threshold: Module status changed to 'Pwr Over'
Sep 5 16:37:04: %C4K_IOSMODPORTMAN-6-INLINEPOWEROK: Inline power within limits: Module status changed to 'Ok'
Sep 5 16:37:04: %C4K_IOSMODPORTMAN-6-MODULEONLINE: Module 6 (WS-X4248-RJ45V S/N: JAB080609GN Hw: 2.0) is online -
I have another computer that a virus may have taken over and I cannot log into it anymore. I just downloaded Itunes on a new computer but most of my songs are not on there. Is there a way to still access or find those songs? Remotely or another way? Or do I need to take it to a tech to get my files off of my hard drive?
Edit > Preferences > Store check Music under Automatic Downloads.
Open the iTunes Store from left hand column, then select Purchasedfrom the column on the right, click the Not In My Library button and select the tunes you want to download again.
That said, you seem to be under a misapprehension as to how iTunes works, or at least how it has worked in the past. It has, until recently, been up to you take care of your purchases once they have been downloaded. You had a one-time download which you were reminded to back up. With the recent change to this policy you can at least download your store purchases again, but having a personal backup of your iTunes store purchases, stuff purchased elsewhere and files ripped from your CDs will still be preferable to gathering all the stuff together again in the event of a disaster.
For a backup strategy see this User Tip.
tt2 -
Is it safe to make in app puchases in a game downloaded from apple store (a game named "lawless" per example) or my card may be hacked???
You can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
To try and stop it happening again you can use Settings > General > Restrictions on the device to prevent in-app purchases being made, and you might (depending upon its iOS version) also have a 'Require Password' option on the Restrictions screen that you can set to 'Immediately' so that your account's password has to be entered for each download from the store. -
The wireless internet card in my macbook pro 2009 is damaged, where can I have it replaced or is there any alternative way so that I can connect to wifi?
ThanksReally? The AASP I went to services both Macs and iPhones (and was actually within that list,) and I was very surprised earlier that they refused to help me with repairing my iPhone 5, even if I voluntarily and expressly said that I am willing to pay for the cost. The service provider said he can't help me with anything and advised that I have it shipped to Singapore (and since that is very difficult for me now, I came here instead to ask for advice).
I will try another AASP very soon and shall update you. Thanks for your help, Clinton! -
I need to speak to a person on the phone. I talke to someone in India on 7/22 I have him total control of my computer he went into my bank account and could see all the charges. His name was Amhit something, he said there was over $500 in charges that I did not make since over a year this has been happening. I tried before to address this with apple but I never get a person and the amounts are always small and then on 7/22 I got a larger charge so I called and somehow got Amhit. Amhit changed my apple password to he could get into my account but I didn't know what it was and I have not been able to do anything in itunes since 7/22 but yet today 8/1 there is a $6.39 charge on my bank card. Something is very messed up!!!! Amhit said he would get me a credit and call me the next day...surprise he never called. I NEED HELP!!!!!!!!!!!!
Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here.
If you've previously contacted iTunes Support then do you have an email that you could reply to ? If not then you can contact them via this link and see what contact methods are available for you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
Aperture 3 report card - any feedback on over all performance so far?
Looking to shift from iPhoto 11 to Aperture 3.
I use iMac (just bought a few months ago).
I have over 40,000 photos in current iPhoto.
Looking to get feedback on what you feel are the greatest benefis and drawbacks from moving.
Thanks all!FWIW:
Aperture vs. iPhoto (listing pros and cons of Aperture based on my experience only):
Pros:
More advanced organization capabilities
Better and more extensive metadata functions (both reading and adding)
Better image adjustment tools (including brushes for local adjustments)
Greater control over export settings
RAW processing has some settings that can be adjusted in the RAW Fine Tuning brick
Cons:
Steeper learning curve
Can use a lot of disk space if you use the external editor function due to creation of TIFF or PSD files for sending to editor (especially true if your Master files are originally JPEG files)
Slow performance may be exhibited with images that need a lot of brushed adjustments applied
Other thoughts:
When Aperture is performing well, it really can't be beat for convenience and control in workflow. If it becomes sluggish, it can be frustrating for some users. As TD commented, the free trial is a great way to see if it both meets your needs and performs well on your hardware.
Since one of my lenses is a kit lense with significant distortion and chromatic abberation on a Nikon D80, I also use a program called DxO Optics Pro when I shoot with that lense. That program is basically designed to be a 'batch' program where you run the images through it and it processes the images for defects automatically (based on lab specs they include in a 'module' which you download for your specific camera body / lense combination) and outputs either JPEG or TIFF (depending on user settings). I really like the results from this process when used for that lense. A huge time saver for lense defect issues in post processing.
If you are looking for speed, that may be of interest if you like the results of the batch processing (which can be modified in pretty much any way). That one also has a free trial and they offer good discounts now and then on the program (which might fit with iPhoto for you if you find Aperture not a good fit).
Hope that helps in some way. -
New Radeon 5870 graphic card putting graphics all over the screen
Just put in Radeon 5870 on a early 2009 Mac Pro running the latest every thing with a Mac screen. It starts up well and then graphic lines all over the place and bits of the screen missing. Is it the card, the Mac or could it be me.
Terminal : kevin-whites-mac-pro:~ kevinwhite$
/Library/LaunchAgents :com.adobe.AAM.Updater-1.0.plist com.adobe.CS5ServiceManager.plist com.epson.epw.agent.plist com.micromat.TechToolProAgent.plist com.symantec.uiagent.application.plist
com.wacom.pentablet.plist com.wacom.wacomtablet.plist net.culater.SIMBL.Agent.plist.
LaunchDaemons:
com.adobe.SwitchBoard.plist com.aladdin.aksusbd.plist com.aladdin.hasplmd.plist
com.app4mac.CheckUpAgent.plist com.apple.aelwriter.plist com.apple.qmaster.qmasterd.plist
com.apple.remotepairtool.plist com.cleverfiles.cfbackd.plist com.micromat.TechToolProDaemon.plist
com.sophos.autoupdate.plist com.sophos.intercheck.plist com.sophos.notification.plist
com.symantec.avscandaemon.plist com.symantec.diskMountNotify.plist
com.symantec.MissedTasks.plist com.symantec.navapd.plist
com.symantec.navapdaemonsl.plist com.symantec.Sched502-1.plist
com.symantec.sharedsettings.plist com.symantec.symdaemon.plist
com.symantec.symSchedDaemon.plist com.symantec.uiagent.plist com.xrite.device.xrdd.plist
/Library/StartupItems: PACESupport.plist Executor PACESupport ProTec6 ProTec6b
Thanks for your help -
Why my "Cards" app cannot go over the "authorising purchase" process
I wanna use the "Cards" app to send a card, but when i finished all the process and login to confirm the payment, the screen halted on the the "Authorising Purchase" process (shown on the picture) and no longer continue, after 20seconds, it returned to the edit interface, without any error message. Anyone know what happened to that? thx!
Hi CharlieSun,
Thanks for visiting Apple Support Communities.
You may find many of the suggestions in this article to be helpful:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702
Best,
Jeremy -
I received a $ 25 iTunes gift card - when I cashed in some air miles points. Unfortunately the label on the back was covered in tape and when I tried to remove the tape and the label I found that there were only 15 numbers out of the sixteen. How can I find out what the number/letter is that is missing? If I provide you with the GCA # will that help?
Please get back to me,Consult this handy guide: iTunes Store: Invalid, inactive, or illegible codes
-
Deploying web applications - jsp generated servlet's may be written over the same file!
Hi, I have made the following test:
Created two simple web applications with one jsp page, and deployed it
with different context names, in weblogic.properties I have:
weblogic.httpd.webApp.weirdApp=\java\weblogic\myserver\weirdApp.war
weblogic.httpd.webApp.weirdAppTwo=\java\weblogic\myserver\weirdAppTwo.war
(Note: I have used two diferent war files, because I have a different
implementation of the jsp page, I could have used the same warfile, and
deployed it two times with the same different names I have used)
These two applications have a jsp named myHomePage.jsp
If I access the first application, like this:
http://myServer:7001/weirdApp/myHomePage.jsp
the servlet for myHomePage is created in
/java/weblogic/myserver/WEB-INF/_tmp_war/jsp_servlet/_myhomepage.class
If I access the second application, like this:
http://myServer:7001/weirdAppTwo/myHomePage.jsp
the servlet for myHomePage is created in
/java/weblogic/myserver/WEB-INF/_tmp_war/jsp_servlet/_myhomepage.class
It overrides the first one! Because the servlets are keeped in memory by
a different class loader this seems to not affect the other servlet, but
I am wondering what may happen with this strange beaver from weblogic!
Bruno Antunes,
Java Software Engineer
email: mailto:[email protected]
Phone: +351.21.7994200
Fax : +351.21.7994242
WhatEverSoft - Java Center
Centro de Competencia Java
Praca de Alvalade, 6 - Piso 4
1700-036 Lisboa - Portugal
URL: http://www.whatevernet.com
****************** Internet Mail Footer ****************************
A presente mensagem pode conter Informação considerada Confidencial.
Se o receptor desta mensagem não for o destinatário indicado, fica
expressamente proibido de copiar ou endereçar a mensagem a terceiros.
Em tal situação, o receptor deverá destruir a presente mensagem e
por gentileza informar o emissor de tal facto.
Privileged or Confidential Information may be contained in this
message. If you are not the addressee indicated in this message,
you may not copy or deliver this message to anyone. In such case,
you should destroy this message and kindly notify the sender by
reply email.I have a separate java class that gets my data and returns a Result object. Do you mean java.sql.ResultSet?
In my main servlet I do the following:
request.setAttribute("supporttracker",
supporttracker.findsupporttracker(monthYear));
and then in my JSP I can iterate through the Result
like the following with no problems:
<c:forEach var="supporttracker" begin="0"
items="${supporttracker.rows}" varStatus="counter">
My problem is that I can only iterate through this
once in the page whereas I have no problem doing
multiple forEach loops through other types of
lists/collections such as an ArrayList. Right, because a ResultSet is a database cursor and doesn't act the same way that an ArrayList does. It's more like an InputStream - once you read it, you close it. If you want to re-read it, you have to re-initialize it again.
Iterators behave that way, too. Once you walk through them, you have to re-initialize them.
I've looked
on the web and in a couple of books, I first thought
it may be scope or some attribute in forEach that I
was missing but I'm stumped. It seems like it's
because the pointer to the result set is at the end
of the result set when trying the second iteration,
but I thought by using the begin="0" would put the
pointer at the first row again, on my second
iteration I'm getting no rows/data outputed.
Please help and thanks in advance!The better thing to do is for your method to return a List of objects, one per row, that represent what the ResultSet returns. Have that method iterate through the ResultSet, loading the rows into the List, and close it before you leave in a finally block. A database cursor is a scarce resource, so it's a good idea to close it as soon as you can.
% -
The NI6534 card can continously outputing data by enabling the onboard memory looping mode of NI 6534 devices. In that specific case, is it possible to change the datastream frequency by using the command "DIG_Block_PG_Config (deviceNumber, group, config, reqSource, timebase, reqInterval, externalGate)" without interrupting the dataflow and reload the data to the memory?
Greetings Chris K,
You will not be able to use the DIG_Block_PG_Config function to change the REQ frequency on the fly. You will have stop the pattern output operation, reconfigure the pattern generation, change the REQ frequency, and then restart the operation.
If you are needing to change the frequency of the pattern generation on the fly, another option would be to use an external clock for the pattern output operation. You could use a counter/timer device to generate a clock signal (you can change the frequency of an output signal from a counter/timer on the fly) and use that clock as external clock for your 6534 pattern generation. We have counter/timer devices that I've linked to below.
PCI-6601
http://sine.ni.com/apps/we/nioc.vp?cid=3589〈=
US
I hope this helps.
Regards,
Todd D.
NI Applications Engineer -
Troubleshooting Information
This page contains technical information that might be useful when you're
trying to solve a problem. If you are looking for answers to common questions
about Firefox, check out our support web site.
Application Basics Name Firefox
Version8.0
User Agent
Mozilla/5.0 (Windows NT 5.1; rv:8.0) Gecko/20100101 Firefox/8.0
Profile Directory Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Crash Reports
about:crashes
Extensions
Name
Version
Enabled
ID
Adblock Plus1.3.10true{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}Admine1.0.128true{73FC23DD-4D25-4B6A-A088-322538DF13E0}FireFox [email protected] Quick [email protected] .NET Framework Assistant0.0.0true{20a82645-c095-46ed-80e3-08825760534b}Yoono7.6.16true{d9284e50-81fc-11da-a72b-0800200c9a66}Java Console6.0.27false{CAFEEFAC-0016-0000-0027-ABCDEFFEDCBA}Java Console6.0.29false{CAFEEFAC-0016-0000-0029-ABCDEFFEDCBA}
Modified Preferences
Name
Value
browser.places.smartBookmarksVersion2browser.startup.homepagehttp://www.facebook.com/login.phpbrowser.startup.homepage_override.buildID20111104165243browser.startup.homepage_override.mstonerv:8.0dom.max_script_run_time0extensions.checkCompatibilitytrueextensions.lastAppVersion8.0gfx.direct2d.force-enabledtruenetwork.cookie.prefsMigratedtruenetwork.http.max-connections32network.http.max-connections-per-server8network.http.max-persistent-connections-per-server4network.http.pipeliningtruenetwork.http.pipelining.maxrequests8network.http.proxy.pipeliningtruenetwork.prefetch-nextfalseplaces.database.lastMaintenance1320785943places.history.expiration.transient_current_max_pages10705plugin.expose_full_pathtrueprivacy.donottrackheader.enabledtrueprivacy.sanitize.migrateFx3Prefstruesecurity.warn_viewing_mixedfalsewebgl.force-enabledtrue
Graphics
Adapter DescriptionNVIDIA GeForce FX 5200Vendor ID10deDevice ID0322Adapter RAMUnknownAdapter Driversnv4_dispDriver Version6.14.11.7519Driver Date5-16-2008Vendor ID (GPU #2)8086Device ID (GPU #2)7125Adapter RAM (GPU #2)UnknownAdapter Drivers (GPU #2)UnknownDriver Version (GPU #2)6.13.1.3196Driver Date (GPU #2)7-23-2002WebGL RendererGoogle Inc. -- ANGLE -- OpenGL ES 2.0 (ANGLE 0.0.0.686)GPU Accelerated Windows0/1. Blocked for your graphics driver version. Try updating your graphics driver to version 257.21 or newer.Go to "about: config" 1) gfx.direct2d.force-enable.....change to "true"
2)layers.acceleration.force-enabled...........change to "true"
"GPU Accelerated Windows0/1. Blocked for your graphics driver version. Try updating your graphics driver to version 257.21 or newer." is now listed as
"GPU Accelerated Windows1/1 Direct3D 9", which is an improvement over nothing...good luck if you have this problem, friends. Hope it helps ya! If someone has a superior solution, please share...I'm open to a full-acceleration experience, please. -
My credit card has been charged and l didnt use it ????
Call Apple. 1-800-My-APPL
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs
Maybe you are looking for
-
Safari 5.0.4 keeps crashing for no reason.
my safari keeps crashing whenever i start the app. please help. problem details: Process: Safari [936] Path: /Applications/Safari.app/Contents/MacOS/Safari Identifier: com.apple.Safari Version: 5.0.4 (6533.20.27) Build Info: WebBrowser-75332027~1 Cod
-
Why is HP SimplePass on my new windows 8.1 machine, when I do not have a finger print or card reader? It keeps popping up and asking me to use it? Can it be used to keep my passwords? What Version of SimplePass are you using? Unknown, apparently yo
-
My iPod keeps on freezing, HELP!!!
everytime i plug my iPod into my iHome to charge it and listen to music it freezes up. i take it out and try to reset it, but it keeps on going back to the main menu and freezes. i left it alone for awhile but it makes this buzzing noise like it is s
-
Legal \ management consolidation (What is the appropriate data model?)
Hi, We are implementing SEM-BCS 6.0 with SAP BI 7.0. For reporting purposes we have 2 types of consolidation: Legal (external) and management (internal). I have the following situation in a project (fictive names for companies): Legal entity hierarch
-
When I do a left click on a take or in the track arranger I get nothing.. no menu or anything. On all the tutorials this guy clicks and bam! he gets the tools menu. How do I fix this? thanks! seed