CSCsr27209 is not visible to me in the Bug Toolkit

Here's what I recieved when I tried looking up this Bug ID.......
Dear valued Cisco Bug Toolkit customer, the bug ID CSCsr27209 you searched contains proprietary information that cannot be disclosed at this time; therefore, we are unable to display the bug details. Please note it is our policy to make all externally-facing bugs available in Bug Toolkit to best assist our customers. As a result, the system administrators have been automatically alerted to the problem.
While we are working to resolve this issue, we invite you to reach out to the experts on the Bug Toolkit Support Community. You may find answers there to your Bug Toolkit questions, or post your feedback on our forum as well. Thank you.
I'm kind of curious about why this is. But I'm really interested in knowing about this bug because it involves VDSL technology that I'm trying to implement at work and now I may be forced to wait on a resolution.
Thanks to anyone, and everyone, who is interested and willing to assist.

Hi Arun
From what that I understand from the "Cisco 880VA - DATA SHEETS" and from the "Cisco 880VA - Q&A" that found in these links
http://www.cisco.com/en/US/prod/collateral/routers/ps380/data_sheet_c78-613481.html
http://www.cisco.com/en/US/prod/collateral/routers/ps380/qa_c67-612339_ps10536_Products_Q_and_A_Item.html
The Cisco 887V supposed to support ADSL2/ADSL2+ & VDSL2 Automatic.
Also in the "Cisco 860,880 and 890 Configuration Guide", it says that Cisco 887V can be setup to connect to the ADSL via the ATM0 interface. As you can see in the example over here:
http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/software/configuration/guide/routconf.html#wp1168916
But none of that really happened.
It seems that there is a fundamental bug with these devices that make it impossible to connect to the ADSL2 / ADSL2+ via the VDSL2 controller.
Thanks
Nitzan

Similar Messages

DataSource is saved, but not visible in BW under the node NODESNOTCONNECTED

When activating a datasource, I received the following message:
Message no. R8418
Diagnosis
You tried to assign a DataSource to the application component DM. This application component is, however, not entered in the RODSAPPL table as an application component.
System Response
The DataSource is saved, but is not visible in BW under the node NODESNOTCONNECTED.
Does anyone know a work around for this?
Thank you.

Hi,
you are missing Application Component Hierarchy in your BW System which is stored in tables called RODSAPPL and RODSAPPLT (for the texts).
First try to replicate the DataSources/Component Hierarchy from the Source System.
Goto RSA1 -> Source Systems -> Replicate DataSources
Goto DataSources again and try to activate.
Take also a look:
534894 - Replication of application components and DataSources to BW
350024 - BW-OLTP-APCO: Frequently asked questions (FAQ)
Hope this helps.
Regards
Andreas

SCCM 2012: F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image": F8 works in winPE

F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image"
F8 option turned on in the boot image.
F8 debug window works in Windows PE.
F8 debug window does not show-up on F8 key-press after entering the 'Currently installed Windows 7 Image" all the way to the end of the task sequence.
But after a 'Restart Step' (and if F8 was pressed) the Task Sequence tends to pause indefinitely as if the
F8 debug screen is open in the background.
I am using SCCM 2012 SP1 (CU 1 is
not an option at the moment).
Any ideas as to how I could get the debug F8 option back?

There have been a couple reported occurrences of this (or something similar) to my knowledge with no resolution in the forums. Your best bet may be to open a case with CSS.
Also note that if you were going to do a CU, why would you pick CU1 instead of CU4? And, can I ask why it's not an option out of curiosity?
Jason | http://blog.configmgrftw.com

SAN Transfer - Virtual Machine resides on a LUN, which is not visible to any of the storage providers._

Hi,
i'm trying to migrate a vm from a Windows Server 2008 R2 Hyper-V host to a Windows Server 2012 R2 Hyper-V host with VMM 2012 R2 using SAN Transfer. We use a Fujitsu Eternus DX60 Storage Unit. The Fujitsu VDS HW Provider is installed on
the VM that hosts VMM 2012 R2 and is configured to connect to the storage.
The Migration wizard Shows the following info in the "Deployment and Transfer Explanation" and only allows LAN Transfer:
Virtual Machine XXX resides on a LUN, which is not visible to any of the storage providers.
I know that i have done this successfully before i upgraded to VMM2012 R2 using VMM2008R2 on a Windows Server 2008 R2.
I'm very thankful for any ideas on how to enable SAN Transfer.
Thanks in advance!
Timo

So, I fixed it - Kinda...
I had to remove the SMI-S provider to my SAN (Again). Ensure I put a valid and signed CA Cert for the SMI-S provider (5989 = SSL 5988 no_ssl) in a PEM format (Base 64).
I then added this to the storage providers section along with a storage classification.
Now, when I run the 'Store in Library' option again and now even though I get the same error - The next button isn't greyed out and the migration works!?!
Weird, yes, workable, yes....

Profile description is not visible from Application which the LDT file has.

Experts,
I am running into strange issue.
Dev created a LDT file for a profile and requested to upload it through a one-off patch.
The profile got updated into the DB for all the 3 languages - US, KO and AR.
However the description is not visible for US when tried to verify from the Forms.
Further analysis gave a tip that the description is NULL only for US and exists for other 2 Langs (KO and AR).
SQL> select PROFILE_OPTION_NAME, DESCRIPTION, LANGUAGE, LAST_UPDATE_DATE, LAST_UPDATED_BY, CREATED_BY, CREATION_DATE
2 from fnd_profile_options_tl where
3 profile_option_name='INL_ITEM_CATEGORY_SET';
PROFILE_OPTION_NAME DESCRIPTION LA LAST_UPDAT LAST_UPDATED_BY CREATED_BY CREATION_D
INL_ITEM_CATEGORY_SET {Category Set to determine the items that will be AR 09-NOV-12              122        122 11-JUL-11
                          LCM trackedØ³ÙÙ
                                         Ø§Ù
Ù Ø³ÙÙ
      Ø§Ù
Ù Ø³ÙÙ
      Ø§Ù
Ù Ø³Ù}
INL_ITEM_CATEGORY_SET {Category Set to determine the items that will be KO 09-NOV-12              122        122 11-JUL-11
                          LCM trackedâ
                                      ¦'+++ '+++ '+++ '+++ '+++ '+++ '+++ '++
                          +Ã
INL_ITEM_CATEGORY_SET                                                                            US 12-MAR-12             *2330*        122 11-JUL-11
SQL>
Also identified the Last Updated By is from FND User - "PROCESS_OPS"
SQL> select USER_ID, USER_NAME from fnd_user where USER_ID in (122, 2330);
   USER_ID            USER_NAME
       122               ORACLE12.2.0
      2330              PROCESS_OPS
SQL>
What could be the reason behind this change?
Why the profile description only for US Lang is not getting updated whereas for other languages it got updated by FND User - "ORACLE12.2.0"?
It clearly shows on 09-Nov-12 there were some changes happened and that to by User_ID 122 which updated for KO and AR.
For some reason the same was not applied for US Lang.

HI Hussein,
I am waiting for your update only.
We have requested Dev to chek the same got to know that,Yes, when tried with CUSTOM_MODE=FORCE, it is working fine.
But they are insisting on how the other Langs got updated and why it would not update for US alone.
Just check the Profile from FND_PROFILE_OPTIONS about the profile details and found below.
SQL> select APPLICATION_ID, PROFILE_OPTION_ID, LAST_UPDATE_DATE, LAST_UPDATED_BY, CREATION_DATE, CREATED_BY
2 from fnd_profile_options where PROFILE_OPTION_NAME='INL_ITEM_CATEGORY_SET';
APPLICATION_ID PROFILE_OPTION_ID LAST_UPDATE_DATE LAST_UPDATED_BY
CREATION_DATE CREATED_BY
9004 1011555 12-MAR-12 2330
11-JUL-11 122
SQL>
For some reason the TL got lastupdate_date and 09-NOV-12 and the same is not reflecting in FND_PROFILE_OPTIONS.
Please advise.

SSRS report not visible in Chrome, found the fix but don't understand where CTL_032 was determined.

SSRS reports come up blank in Chrome. I found the solution listed numerous times. I am running SQL Server 2012.
Tried div#ctl31_ctl09 and ctl31_ctl10 but finally got to div#ctl32_ctl09 that worked. Where in the heck to I find the clt codes for the curretn version of SQL and can I find all ctl codes and just list them all so I don't have to worry about what one.
div#ctl31_ctl09,
div#ctl31_ctl10,
and so on.
overflow: visible !important;
David Young

Hello David,
See Planning for Reporting Services and Power View Browser Support (SSRS 2014); Chrome is not supported, on IE, Firefox and Safari.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Menu is not visible after logging into the portal(SSO)...please help.

Hello Experts,
I am facing one EP issue...its like once the user logs in to the portal through SSO...he is not able to see any menu on the left side of the page. Actually there is a Detailed Navigation Tab on Left side which contains links to other servers.
Since there is no Detailed navigation tab on his page this particular user is not able to navigate to other servers...
Please letme know where to look for as I am very very new to EP...please give in your valuable inputs...
Regards,
Jignesh.

Hi Joshi,
Check ur detailed navigation is open or closed
goto cont adminportal content-- go to ur default frame work page-- desktop innerpage-- open --- see detailed navigation iview is checked for visible or not
hope this helps u
Regards
Krishna.

Sales Area is not visible in CRM for the products downloaded from R/3

Hi Experts,
Our client is using CRM 2007 and R/3 4.7.
connectivity was established via Middleware.
Before downloading the materials from R/3 we have done the following things
1. Following customizing objects were downloaded
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_PROD3
DNL_CUST_SALES
DNL_CUST_S_AREA
2. Org structure was copied from R/3 using the Tcode - CRMC_R3_ORG_GENERATE.
3. All the required sales are were correctly maintained( Downloaded ) in the org structure and under attributes tab " Object permitted for determination was selected".
4. Executed the report HRBCI_ATTRIBUTES_BUFFER_UPDATE.
After down loading the materials also we have executed the above report.
But the sales area details are not coming with the product.
Not: If I try to create a product in CRM I was not able to assign Sales area, ASSIGN button was in disabled mode.
Could you please guide me to solve this issue.
Thanks in advance.
Nadh.

Hi Nadh,
Can you please check if all the condition tables are replicated correctly from R/3 to CRM. Eg ZDNL_COND_A805 and DNL_COND_A191.
I hope the initial download for the same would be completed.
Because there might be some fields relating to Material and Sales Area in these condition tables, which might not have moved to CRM.
Thats the reason I am asking to check.
Thanks.
Best Regards,
Arun Sankar.

Menu ar not visible when i copy the program

The menu bar is not getting displayed when i made i copy of the report...

Hi,
Its becuase u havn't copied the menu bar. Go to the tcode SE41 and copy the menu of the report to the Z report u created.
Regards,
Nikhil

Appended Field is not visible repectively listet in the DataSource

Hi,
I've ran into a problem which I'm unable to solve. Maybe you can give me a hint.
I've appended a DataSource (0EC_PCA_3) in SAP R3 4.7 by using RSA6 clicking on the extract structure and using the append structure function.
After that the appended field is listed (in a different color) in the extract structure.
In the next step I've activated the extract structure.
When I went back to RSA6 and took a look at the DataSource the new field isn't listet in the field list.
At this point I don't know what went wrong. So please let me know if you got an idea to solve this issue.
Regards
Axel

Hi Gaurav,
thanks for your hint to deactivate and activate. Maybe it led us to the right track for the solution.
I'm not able to reactivate my BADI-Implementation.
When I search the internet according to the error message:
Field "C_T_DATA" is unknown. It is neigther in one of the specific tables nor defined by a "DATA" statement.
Every answer says that the implementation should be activated anyway, what works for the implementing class, but not for the implementation itself.
I've done the implementation according to this manual:
[url] http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3001894b-b1fb-2910-77ba-e80b6f2053b7?quicklink=index&overridelayout=true
I don't know how to fix this error either. The source code I used is the same used in this manual (simple approach page 11) but with differnet table and fields.
Edited by: Axel M. on Aug 19, 2011 3:34 PM

To glow or not to glow...the bug is the question

Okay, so I had poor battery performance and I swapped out my phone for a new one. Charged it up last night. No plug icon. No glow. Tried the restore. Still no glow. Does this mean that I got another lemon?
IF this charge/glow thing is a software bug, then why are some phones doing it, and some not? The software is all the same. Isn't it more likely that it's a hardware problem, since the only variable between phones has to be hardware????

Are you charging it using your wall charger? If so, the problem could be with your ac adapter. Many people have reported problems with their wall charger. They say the phone charges fine when connected to their computer, but no charge when plugged into the wall. Most have been able to get a direct exchange from their local Apple Store to remedy the problem. My 2 cents.

My favorite folders not showing up under address bar on safari in my iPad Air. I do have the tab set to on under settings. The folders are still there for me to save to just not visible on safari anymore, help! tried to fix for days. Thanks

My favorite folders not showing up under address bar on safari anymore on my iPad Air.The folders are still there for me to save to just not visible, I do have the tab under settings, safari, set to on to show the favorites, and did reset the iPad, thanks

Quit all apps (Double tap the Home button and swipe the preview page up for each open app) then Reset (Hold the Sleep/Wake & Home buttons until the screen goes black and the Apple logo appears - no data will bee lost)
Make sure you have your Favorites selected properly here: Settings > Safari > Favorites

The "Indicator: Goods Items/Delivery Costs/Both" not visible

Hi!
The "Indicator: Goods Items/Delivery Costs/Both" is not visible to one of the users in the Logistics Invoice Verification (MIR7) and in me23n transaction. It's funny - if he logs in with his username on my computer, he can see it - but on his computer he can't.
So I think it might be something in GUI settings - but what?
Thanks for help!
Meti

Found out solution - the user changed size of display and the field vanished. When he changed size back, the field appeared again.
Thanx!
Bye

"podcasts" is not visible in iTunes after software update

iTunes no longer shows "podcasts" as a category. I have several active subscriptions--they seem to have disappeared. All of the other usual categories (e.g., music, TV shows) are still there. This occurred immediately after I downloaded today's iTunes upgrade. I have tried downloading more podcasts. That happens fine--but they are not visible from iTunes after the download.

I can re-check the "podcasts" box in the Windows version. It's not grayed out. But there doesn't seem to be any way to save my changes. Didn't the "preferences" dialog box used to have a "save changes" button at the bottom?

Loop while is not visible

Hi All,
In SWDD (Every step type that can be inserted )are visible but loop while is not visible.What could be the possible reason?Please let me know.
Kind Regards,
Anshu Kumar

Hi Anshu,
Would like to correct you that the step name is Loop (Until).
Please check with the basis team if this step is not visible for you.
Also check if you are not missing out this step while searching.
Hope this helps!
Regards,
Saumya

CSCsr27209 is not visible to me in the Bug Toolkit

Similar Messages

Maybe you are looking for