CSCti69813 - SDM mismatch did not display in [show switch] in stack

Hi
Is CSCti69813 fixed in 12.2(55)SE5 ?
Thanks in advance.
Hajime

The data for that bug indicates that the fix was only put into 12.2(58)SE. However, the "Known afected versions" section seems to indicate that the problem code is only present up to 12.2(55)SE2 which would seem to imply that ethe problem is fixed in 12.2(55)SE3 or later.
Eitehr there is a problem with the Known Affected Versions algorithm (possible) or the code was applies to the 12.2(55)SE branch as part of a peripherally related code fix.
Taking a quick glance at the code repository, the patched code does NOT exist in the 12.2(55)SE branch, so the Known Affected Versions algorithm has a bug. 12.2(58)SE is required for the fix.

Similar Messages

Oracle HRMS Seeded Integrator did not display

I have added the following submenu in HRMS Super User
HR ADI Seeded Integrator Form Functions.
HR ADI Skills Seeded Integrator Form Functions.
And also restart the apache server but seeded HRMS integrator did not display in the integrator list at the time of create document

In case at times you dont see some seeded integrator try this
update bne_integrators_b
set enabled ='Y'
where integrator_code = <intg_code>;Edited by: 936671 on Jul 16, 2012 10:55 AM

Calendar Events did not display

I am using E-Business 12.1.2 but in oracle HRMS Work Structure did not display under
Work Structures > Calendar Events > Events & Coverage > Work Structures >Enter and Maintain Events
How it will display ?

What Responsibility are you using ?
Under US Super HRMS Manager -
Work Structures > Calendar Events > Events & Coverage >Enter and Maintain Events

Called DID not displayed

Dear Cisco community,
we are using a SIP trunk with 5 DIDs. Is there a way to see the line (DID) that has been called on the display of a SPA 303? We can only see the caller ID (twice, one line with +44 as prefix and a second line with 9xxxx). Routing, call hunting, shared extensions and everything else works perfectly.
I really hope that this is possible, we need to be able to see which inbound line (DID) has been called to answer the call correctly.
Thanks for your help!
Sebastian

Hi Sabastian,
The phone LCD only displays the caller ID, who is calling. It can not display the number which is called.
You can click "Add Specified Number" to add DIDs on "Inbound Calls" page of the configuration utility, then select the different routing destinations for the different DIDs, so that you can answer the call correctly for the different DIDs being called.
Hope it helps.
Best regards,
Wendy Yang

Why JTRee icon did not display??

Hello sir:
I can use a panel to display JTree's all nodes and their icons independently in a independent JtreeIcon.java;
but when I put this JTree into another panel, I can see only tree's all nodes and their text strings, but cannot see their icons, if I use Drag and Drop to move these nodes, the icon moved displays its icon, other ones still not display their icon,
I think I am short of some methiods, can any guru advice??
Thanks

Inside every "big" problem, there's a small one trying to escape.
If you work at it, you will be able to reproduce you error in a small
example program.

HT201412 MY IPHONE NOT DISPLAY IT SHOWS ONLY APPLE SIGN

my iphone is not responding its shows only apple logo on the homescreen

Press the HOME button and power button at the same time and do not release them until the screen goes black and the Apple logo reappears. This should restart your phone.

Failover did not happen when network switch went down!!! PLEASE HELP

Hi gurus,
Yesterday one disaster struck my RAC database. We have two node cluster and it is 10.2.0.2, both of them located in different sites, yesterday suddenly power went down and the one of the network switch went down and got destructed, node one of RAC database was connected to that switch, but the failover did not happen to the node two as this should be the case when one node goes down the other should be available for all the node one sessions/connections.
when I tried to ping/telnet the node 1, it was not happening because the switch was down, the network guyz connected the cables to other switch available. When I connected to the node 1, it was showing "Oracle is not available" message.
And when I tried the other node, it was the same case but I did not see any error in alert log file. Then my TL restarted both the nodes and then the database was available.
I am very confused that how the failover did not happen and how the database went down, PLEASE suggest something to how to identifiy what was happened. Thanks & Regards
Edited by: user1221 on Mar 18, 2009 1:09 AM

About Oracle RAC ... you have 2 nodes ... You have to connect 4 IPs.
I mean
- IP public node1
- IP public node2
- IP Virtual node1
- IP Virtual node2
When node1 down
You can not ping "IP public node1", but you should ping "- IP Virtual node1", because it should up on node2.
But not bind 1521 port.
Idea about failover
you have to create new difference Service...on RAC Database!
and on your client have to set TNS to on failover and balance (if you used OCI), you can use TAF feature
Example:
DB =
(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = db01-vip)(PORT = 1521)) (ADDRESS = (PROTOCOL = TCP)(HOST = db02-vip)(PORT = 1521)) (FAILOVER=ON)(LOAD_BALANCE = yes) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = NEW_SERVICE_DB) (FAILOVER_MODE = (TYPE = SELECT) (METHOD = BASIC) (RETRIES = 180) (DELAY = 5))))
If you use JDBC, can not use TAF.
Anyway, I suggest you read more about RAC on http://otn.oracle.com/rac and http://oracleracsig.org
Good Luck

When I load firefox it does not load my default page, and any page I try to load does not display, only showing (untitled).

My firefox (ver. 3.6.13) shows an untitled page when I load the program, rather than my start page. Any page I try to load only displays (Untitled) and does not load. My Internet Explorer displays web pages normally.

Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile

I purchased a book on my iPad and it did not download it shows up in purchased and downloading but does not complete. How can I get my book my device is up to date and supports the book.

I purchased a book today on my iPad it won't download it shows up in purchased and I have checked all my systems are up to date.

Close all open apps by double-tapping the home button, then swiping upward on the app window (not the smaller icon) off the screen.
Then reset: hold down the home button along with the power button until you see the Apple, then let go.

Since upgrading to Firefox 33, The open sans font did not display correctly when specified by a website.

Some of the vertical lines in the fonts are double width like a mixture of bold and normal font weight. I have hardware accellaration disabled. The problem is not fixed when I change default font settings. The problem is not resolved be resetting zoom to 0.
Inspect Element identifies the problem happens when the website selects open Sans. If I stop sites selecting fonts and force the defaults I don not get the problem. Therefore the problem is with Firefox 33.1 rendering certain fonts specified by websites.
My machine is windows vista and Open Sans is not shown in the font list. However this was not a problem with previous versions of Firefox.
I did need to do a reset of firefox parameters during the upgrade to 33 so maybe ther eis some other parameter which needs changing to help render fonts which are not loaded on the machine?

Here is a screenshot:

(SAP BW 3.5) Navigate attributes did not display value in BEx

Dear SAP BW Expert,
I created simple queries using BEx to display data in an InfoObject. This InfoObject composed of many attributes which were set to navigate attributes. I already loaded data into this infoobject as well. After I check data in RSA1, all data seemed to be in place.
Unfortunately, I'm not quite sure whether I was missing any steps since those data assigned to those attributes could not be display via BEx.
Any suggestion would be appreciated.
Thank you very much.
-WJ-

I already tried to re-activate. Unfortunately, I still got the same results.

Itunes not displaying tv shows

i do not see a TV shows section in ITUNES. I am still able to see TV shows I previously ordered in my library. Any advice/suggestions? Thanks

Hello alarife,
You may need to verify that the cable in use and the TV both support HDCP.
iTunes: Purchasing and viewing HD videos
http://support.apple.com/kb/HT3209
Cheers,
Allen

Itunes 7 did not display US itunes store

hi
im currenly using the latest itunes7.the problem im having now is that my itunes does not show the US itunes store,instead it shows the JAPAN itunes store.can anyone assist me with this problem???
TQ

On the stores main page, roll down to the very bottom middle section and where you see the japan flag, change it to "United States"

SelectBooleanCheckbox in adf did not display

Hi all,
I am have a problem in af:selectBooleanCheckbox with selected state value : 1 and unselected : 0.
And the attribute in database, data type is Number(1,0), Nullable : No, Data Default : 0.
But if i create new row, af:selectBooleanCheckbox didn't display "rectangle" like select boolean checkbox normally,
only display "strip".
I can't use af:selectBooleanCheckbox, so error in data is required.
I am using jdev 11.1.2.2.0
Thanks in advance

1. Make sure that your attribute is updatable.
2. This thread should get you the answer issue with Boolean Check box valueChangeListener

HT201209 Please help, tried to redeem an App Store gift card for $15.00. It worked when I put it in earlier but I was still charging purchases to my credit card. I did not see how to switch over to the gift card. Credit is gone and code now invalid. W

I need help with redeeming a $15 App Store certificate. I tried to redeem earlier in the day and it was credited to my account. I could not figure out how to switch payment from my credit card to the gift card credit. Later on in the day I see the credit is completely gone and now the card is invalid. Nothing was purchased with the gift card so I want to know where the credit went. I also have$5 credited to my Apple ID from a past gift card that I can't access. What can I do. Is there a customer service number???

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

CSCti69813 - SDM mismatch did not display in [show switch] in stack

Similar Messages

Maybe you are looking for