CSCtq10477 - Callmanager 9.1 can't make outbound calls, Route List gets error 41 - All devices busy

Hi all
I seem to have run into bug CSCtq10477 and maybe CSCul71689 and CSCum85086, where calls can be received from an MGCP gateway, but fail outbound with Callmanager logs showing
03095771.002 |17:34:14.103 |AppInfo |RouteListCdrc::null0_CcSetupReq - Terminating a call after the RouteListCdrc cannot find any more device.
03095771.003 |17:34:14.103 |AppInfo |RouteListCdrc::terminateCall - No more Routes in RouteListName = RL_OUTBOUND. Rejecting the call
03095771.004 |17:34:14.103 |AppInfo |RouteListCdrc::terminateCall - Sending CcRejInd, with the cause code (41), to RouteListControl because all devices are busy/stopped.
03095771.005 |17:34:14.103 |AppInfo |GenAlarm: AlarmName = RouteListExhausted, subFac = CALLMANAGERKeyParam = , severity = 4, AlarmMsg = RouteListName : RL_OUTBOUND, Reason=41, RouteGroups(RG_OUTBOUND)
and a Route List exhausted alarm appearing in RTMT.
Resetting the MGCP gateway in Callmanager, bouncing the serial interface, E1 controller and No MGCP/MGCP has no impact. I could also see the circuit was not full.
We have got round this by removing the gateway from the Route Group and pointing the Route Patterns directly at the gateway and this works. I can see two of the bugs above are fixed in the latest 9.1.2SU3 code (9.1.2.13900-10), but I don't see CSCtq10477. This bug document shows some 9.1 code is OK, but not this one.
9.1(1.21020.1) - Not listed for download, is this an ES?
9.1(2.10000.11) - Not listed for download, is this an ES?
9.1(2.10000.28) - 9.1(2) - but not shown in the release notes for 9.1(2) either.
Does anyone know if the Release notes just missed this out, or does the bug document need the Fixed versions to be updated?
Thanks

Hi,
9.1(1.21020.1) is an ES.
9.1(2.10000.28) is the base version of 9.1(2) so this bug will be fixed in this version or any higher version of 9.1(2).
Upgrading to the latest ES or 9.1(1) or 9.1(2)SU3 would take care of this bug.
HTH
Manish

Similar Messages

H.323 can not make outbound calls

Srs,
I have a Tandberg video conference that is configured in callmanager wich h.323 client. When i use the tandberg to make a call, the call is disconnect, i belive for telco.
THIS IS OK ! MAKE FROM TEL IP !!!
Apr 10 18:32:42.860: //-1/802E1084BE06/CCAPI/cc_api_display_ie_subfields:
cc_api_call_setup_ind_common:
cisco-username=Claudio
----- ccCallInfo IE subfields -----
cisco-ani=21288257
cisco-anitype=0
cisco-aniplan=0
cisco-anipi=1
cisco-anisi=1
dest=0213134951223
cisco-desttype=0
cisco-destplan=0
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=-1
cisco-rdnplan=-1
cisco-rdnpi=-1
cisco-rdnsi=-1
cisco-redirectreason=-1 fwd_final_type =0
final_redirectNumber =
hunt_group_timeout =0
THIS IS NOT OK ! MAKE FROM TANDBERG H.323
GW-VOICE#
Apr 10 18:31:19.932: //-1/00639752BB06/CCAPI/cc_api_display_ie_subfields:
cc_api_call_setup_ind_common:
cisco-username=192.168.1.5
----- ccCallInfo IE subfields -----
cisco-ani=
cisco-anitype=0
cisco-aniplan=0
cisco-anipi=0
cisco-anisi=0
dest=0213134951223
cisco-desttype=0
cisco-destplan=0
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=-1
cisco-rdnplan=-1
cisco-rdnpi=-1
cisco-rdnsi=-1
cisco-redirectreason=-1 fwd_final_type =0
final_redirectNumber =
hunt_group_timeout =0
When i try a call through a mobile out , the call is ok !
obs: In my LAN when i call from tandberg for a Tel IP, the number of tandber don't appear in the display of Tel IP.

Hi,
I had a similar problem with the 7985 video phone. I solved my problem adding the next command to the voice-ports: bearer-cap Speech.
In this case, I was trying to send only voice calls.
Hope this helps,
Juan Luis

HT4993 I tried to make a call bit kept getting "error message 16" Why?

I have a replacement iphone. I tried to make a call from it and I got "error message 16" Why?

Ask your phone carrier why

Can't make Airport Extreme router work with non-Apple device

I am trying to help a friend who has a PC (Windows 7) that has a wired Ethernet connection to his girlfriend's Airport Extreme router. He wants his Internet-capable Blu-Ray player and her IPad to wirelessly access the Internet via the Aiport Extreme router, with both the Blu-Ray player and the IPad's Internet access protected by WPA-2 encryption (both devices are capable of WPA-2). How do I do this?
Here are the problems we've run into:
1) The Airport Utility for Windows (5.6.1) has been installed on the P.C., and we've used it to update the firmware on the Airport Extreme router. However, after we followed the Aiport Utility instructions to set up the network, all the router wanted to do was look for an Apple device. His girlfriend and her IPad are out-of-town right now, so the only device within range was the Blu-Ray player, and the router did not see it. Not only that, but almost all the menu options on the Airport Utility were "greyed out" (unusable), except for "Configuration." I am very troubled by the fact that the Airport Extreme router seems to want to look only for Apple devices.
2) In order to get Internet access for his Blu-Ray player for the time being, my friend pushed the "reset" button on the Airport Extreme router, and he can now use his Blu-Ray player for Netflix and other Internet streaming options. However, the Blu-Ray's wireless Internet access is an unencrypted connection, and the Airport Extreme router is displaying a flashing amber light -- not a good situation.
3) Although I know his girlfriend could access the router via her IPad when she returns, she is French-Canadian, and her IPad operates in French. I happen to know some French, but I have enough trouble trying to understand wireless networking terminology in English without having to try to figure out the equivalent terms in French. Thankfully, the Airport Utility for Windows on his P.C. is in English, so that's what we've got to use to solve this problem.
I have profound respect for Apple products, but I'm a Windows/Linkysis router guy, so that's why I'm stumped. Can anybody out there help me?

Which model of the AirPort Extreme Base Station (AEBS) do they have? What is the version of firmware that you updated it to?
By default, the AEBS will broadcast an unsecured Wi-Fi network with a network name (or SSID) of something like Apple Network NNNNNN. This would be similar to a Linksys when first powered-up.

Can't make phone calls on my watch.

I can receive phone calls on my Apple watch but can't make outbound calls. The call ends immediately - it never dials or connects. Is anyone else having this issue?

Me again. Just spent half an hour in the Apple Store. It seems to be a network issue because when they ran a diagnostic it showed that all of the calls were being dropped by the network, not the device. So it may be that my carrier is not ready to deal with the new technology. Hopefully a carrier update will come soon. It is early days yet. Even the Apple Store employees did not have watches yet. They were envious of mine! And mine was the first "watch question" the guy at the Genius Bar had dealt with.

TS4079 I can only make international calls with siri, not local calls

I live in Burundi, with the country code +257. I can make calls to the US, Canada and Europe but I can't make local calls. I have tried all the troubleshooting tips and tricks, checked my settings etc. Any ideas?

You also posted this on an iPhone forum. Not sure why you posted it here on an iPad forum.

Phone won't make outbound calls now. In a hotel and unable to call support cause my cell PHONE DOESN'T WORK anymore. this was after 17 minutes on hold and asking for my 4 to 48 hour voicemail notification delay to be fixed. rep said it was and to turn pho

Phone won't make outbound calls. can't call verizon support. this after being on hold for 17 minutes in an attempt to fix voicemail notification. this is a nightmare and Verizon is unreachable. Any way to get Verizon wireless to fix my service when they can't be called (because their phone service doesn't work)?

Well 1, I guess it's not that important to you, 2, customer support generally closes at 11pm in the time zone you are in, 3, toll free and local calls are free in hotels, 4 there is limited support after hours.

I cannot make outbound calls on my iphone 5

I can receive calls, but not make outbound calls on my Iphone 5. Anyone else having the same issue?

Talk to your carrier about it.

New Subscription, BUT unable to make OUTBOUND CALL...

Hello, I'm unable to make outbound calls because my skype credit was low. I went ahead and purchased a WORLD subscription and still unable to make outbound calls. Please help or FIX!
What would it take for an ADMIN SUPPORT person from SKYPE to post to my entry. It's simple, I purchased a WORLD subscription when I ran out of skype credits. Now, after the subscription has been purchased and delivered to my account. I can't call a local UK land-line or toll-free line still. PLEASE HELP?

Hi,
Calls to UK shared cost numbers are not covered by subscriptions. Since shared cost / premium numbers have much higher rate you will need Skype Credit.
Calls will be charged based on these rates: http://www.skype.com/intl/en/prices/payg-rates/
Note: If you don't get an answer in forum then you can also contact customer service who is available 24/7
https://support.skype.com/en/faq/FA1170/How-can-I-contact-Skype-Customer-Service
Andre
If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

How can I make a call from iPad

How can I make a call from IPad

Oh, you have to get the iPhone app.
Seriously, though .... you are aware that it's not a telephone, right? Any calls you make will be using VOIP and any of the apps and/or services (Skype, Google Talk, etc., etc.) which support that. Some of those are US-only, all have various restrictions and cost structures.

Sbi mobile banking is not working in iphone4. i can't make video call to other than iphone4

sbi mobile banking is not working in iphone4. i can't make video call to other than iphone4

What troubleshooting steps have you tried? Have you tried resetting the iPhone? or restoring it?

I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! Why is this a problem and how can i repair it?

I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! Why is this a problem and how can i repair it?

"I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! ":
That is correct.
"Why is this a problem and how can i repair it?"
Becasue this has never been a feature of iphone/ipod/ipad. There is nothing to repair.

I can only make emergency calls from my iphone 4. How do I fix this? Not tech savvy in the slightest !!

I've just recently bought a white iphone formy daughter and am trying to put my sim into her old one but can only make emergency calls. How do I get round this? Not tech savvy at all as you can probably gather. Thanks

Did you connect your iPhone to the computer and sync it with iTunes? You will need the internet as well as Apple will unlock your iPhone over the internet via iTunes. Let us know if this helps.

How can I make a call to *190*phone number# in c#?

Hi,
I am trying to create an app as shortcut for some requests.
I want to make a call to this number: *190*phone number# using c# but it never works.
On the phone, I can call this number and I get a reply from my provider.
If I try to call it using:
Windows.ApplicationModel.Calls.PhoneCallManager.ShowPhoneCallUI("*190*phone number#", "TEST CALL");
I get a message saying that I have to use the dialer keypad to send the request.
Is there a workaround for this (bug)? I mean, if I put the phone number in the phoneCall-request, it is because I don't want insert it manually in the dialer keypad...
Thanks,
Adriano

Yes security LOL...
If Microsoft want security, they should create a smartphone without the possibility to install apps ;)
If an app can't make a call (user has to press CALL), the same thing is also possible for a FREE request to the provider, or not?
Thanks for the link! This show once again that write a utility for WP is a hard work...
If I create a new contact, I have to call phoneCallTask.Show();
... And so I am on the same situation.
.My phone provider created an app for iPhone and one for Android. I was thinking I would be able to create something for Windows Phone too. Now I know why nobody want to create tools for Windows Phone. The API never allow you to write a utility (for security
reason, I know ;) )... But it would also be nice to have a utility some times in a store full of inutility apps :(
About this BUG:
I can create a textbox where the user can copy the phone number (maybe the app could copy it automatically in the clipboard if there is no security problem about the OS :P). But the user has to exit the app, open the dialer and insert this text.
Is there a way to open the phone dialer?
Thank you for the support Cristian!

Can I make a call on an iPad?

Can I make a call from an iPad?

only way is by using an app such as skype or the likes

CSCtq10477 - Callmanager 9.1 can't make outbound calls, Route List gets error 41 - All devices busy

Similar Messages

Maybe you are looking for