CSCtz15274 - percentFLEXDSPRM-3-UNSUPPORTED_CODEC: codec cisco is not supported on dsp T38 - 1

I have also been running into this on FXO to FXS calls with no local-bypass enabled.

Hi Zubair,
In addition to what Mr. Chris has referred to , please refer the link which says:
http://www.cisco.com/en/US/docs/routers/access/1900/software/configuration/guide/pvdm3_config.html#wp1054029
All codecs that are supported on the PVDM2 are supported on the PVDM3, except that the PVDM3 does not support the G.723 (G.723.1 and G.723.1A) codecs. The PVDM2 can be used to provide G.723 codec support or the G.729 codec can be as an alternative on the PVDM3.
The PVDM3 DSP does not support Cisco Fax Relay. The PVDM2 (5510 DSP) does support Cisco Fax Relay.
regds,
aman

Similar Messages

  • I messed up:  codec not supported

    I am studying Itallan. I found my way to Italian TV and radio stations on the web and had them playing just fine in Safari. When I clicked on the <Link to Video> on the page in Safari, Windows Media Player launched and I could watch the video and listen to the audio just fine, or in the case of radio programs, just listen to the audio.
    Then I did something stupid.
    I thought I'd try and download some freeware with which to record these programs and move them to my iPod for use in the car.
    I tried a couple of freeware apps, none seemed to work well, so I trashed them.
    When I went back to the Italian web page, clinked on <Link to video>, the video launched and there was no audio. Just as the Windows Media Player opened the file, it warned: This file may not play correctly because it was compressed by using a codec that is not supported.
    I then tried to open some humorous .wmv files I had saved months ago to my HD. When I launched them, same thing. Video plays but no audio. I tried some of my saved .mpg files. Same thing. Video's fine; no audio.
    When I click on the Italian radio stations in Safari, they stations will not play and the Status Bar notes: One error opening the page: choose Activity from Window menu. Activity noted, inter alia, in red: Plug-in cancelled.
    Checked my Audio preferences, all is fine and I have my system beep, tunes play in iTunes, etc.
    I backed up before I began playing around so whichever file or plug-in went AWOL, I should be able to get it from my backup.
    When I logged out then into a new user account and tried to go to the Italian sites, exact same thing happened. Video, but no audio.
    Help...I need to get this working so I can get on with my Italian studies.
    Many thanks for saving me from my own stupidity.
    bob

    I solved my own problem.
    I remembered that a few months back I had a similar problem, this time not associated with the installation of any new software. I was directed to an Apple Knowledgebase article on what to do when this happens.
    The solution, then and this time around, was to go to Audio MIDI Setup in the Utilities folder and check the Audio Output Source settings.
    Both times, mine had been reset from 44100.0Hz to something much higher.
    When I reset it to 44100, all was well again.
    Thanks for replying, nonetheless...bob

  • Does CISCO C3560X VLAN support multiple Network segments which are further configured with HSRP function

    Hi Cisco experts,
        My name is Kumagai and I need your expert opinions below.
    I am trying to configure one VLAN1 support multiple network segments as below.
    (this should be a very straight forward configuration and should be OK, I think ? )
     interface Vlan1
     ip address 172.30.0.0 255.255.128.0
     ip address 172.30.31.253 255.255.254.0 secondary
     ip address 172.30.61.253 255.255.254.0 secondary
     ip address 172.30.71.253 255.255.254.0 secondary
     ip address 172.30.4.253 255.255.255.0 secondary
     The only issue that is eating me is the above network segments are using HSRP too
     and I am not sure is this possible with a combination of VLAN1 supporting multiples which are
     further supported with HSRP settings in Cisco environment.
    !example of HSRP:
    interface Vlan4
     ip address 172.30.4.253 255.255.255.0
     no ip redirects
     standby 4 ip 172.30.4.254
     standby 4 priority 105
     standby 4 preempt
    <<< what will happen if I add the HSRP configuration as below into the above VLAN1 with multiple Network segment ??)
     I would like to summarize my "Combined" configurations as below but I need your expert opinions on
     whether the configuration below is workable without any problem ??
     Or it is a total flop because Cisco does not support the configuration below !!!
     interface Vlan1
     ip address 172.30.0.0 255.255.128.0
     ip address 172.30.31.253 255.255.254.0 secondary
     ip address 172.30.61.253 255.255.254.0 secondary
     ip address 172.30.71.253 255.255.254.0 secondary
     ip address 172.30.4.253 255.255.255.0  secondary
     standby 30 ip 172.30.31.254
     standby 30 priority 105
     standby 30 preempt
     standby 60 ip 172.30.61.254
     standby 60 priority 105
     standby 60 preempt
     standby 70 ip 172.30.71.254
     standby 70 priority 105
     standby 70 preempt
     standby  4 ip 172.30.4.254
     standby  4 priority 105
     standby  4 preempt
    Thanking you in advance !!!!!

    Hi,
    As far as i know we dont set the ip helper address on the radio interface. It should be on the L3 interface of corresposding VLANs i.e.
    int vlan 20
    ip helper-address 192.168.33.xxx
    int vlan 60
    ip helper-address 130.20.1.xxx
    I'm assuming that your using SVI's (int Vlan 20 and int Vlan 60) rahter than physical interfaces. Also hope you have configured switch port as trunk where this AP is connected.
    Modify the AP config as below since you are using data vlan as the native vlan
    interface Dot11Radio0.20
    encapsulation dot1Q 20 native
    interface FastEthernet0.20
    encapsulation dot1Q 20 native
    Ideally your AP fastethernet configuration should looks like below and not sure how you missed this as this comes by default when you have multiple vlans for multiple ssids.
    interface FastEthernet0.20
    encapsulation dot1Q 20 native
    no ip route-cache
    bridge-group 20
    no bridge-group 20 source-learning
    bridge-group 20 spanning-disabled
    interface FastEthernet0.60
    encapsulation dot1Q 60
    no ip route-cache
    bridge-group 60
    no bridge-group 60 source-learning
    bridge-group 60 spanning-disabled
    Hope this helps.
    Regards
    Najaf

  • Cisco OS 2000.2.7 does not support MCS 7825I1 ?

    Hi Pros,
    I have a new installation coming up of CCM 4.1.3 & Unity 4.0.5
    Seems Cisco has sent wrong set of OS Cds for CCM. The Server is a IBM make (MCS 7825I1) with Prescott 3.4 CPU & 2GB RAM alongwith 2 * SATA 80GB HDD.
    When I insert Hardware Detection CD for 2000.2.7 it says "This OS version does not support the detected server. Remove the disk and press any key to reboot.
    My BoM says:
    CM4.1-K9-7825= SW CallMgr 4.1, MCS-7825 2
    MCS-7825-I1-IPC1 HW Only MCS-7825-I1 with 2GB RAM
    and SATA RAID
    2
    Can I install like this - Run IBM ServeRaid, Prep server, Insert Win2k cd, then after install run OS Upgrade 2000.2.7
    Will this work?
    Regards,
    Pratik

    i am not sure why the CPU speed should matter.......
    I don't know what to say, if you have the "a" hardware detection disk, this should work. I have never had a problem once i had the right media so i will step aside and wait to see if someone else can help.
    Steve

  • Error Message: This type of file is not supported, or the required codec is not installed?

    I am trying to get media from my computer, and I only receive this error message :
    This type of file is not supported, or the required codec is not installed?
    What should I do? I have a window 8 laptop. My video files are from my itouch/ipod. I am using Premiere Elements 7.
    I have used this software with success before. HELP would greatly be appreciated!

    darlingdarleen
    Did both laptop 1 and 2 have QuickTime (latest version or any version) installed on the computers with Premiere Elements 7 when you got this "this type of file......" message?
    If you go to the opened Premiere Elements 7 projects involved and look at Share/Personal Computer/QuickTime, do you find that QuickTime Presets are shown and that you find export settings choices under the Advanced Button/Video Tab and Audio Tab?
    Look at the file name of the video. Do you see any irregularies in the name of the file, dots and such?
    If you record new iPod footage, open a new Premiere Elements project, and import that iPod footage, do you still get the error message? Putting aside, iTouch, what model iPod are these videos coming from?
    Thanks.
    ATR

  • How to solve "this type of file is not supported, or the required codec is not installed"?

    Hi all,
    I've just started using a new computer with WIndows 8.1 within the last week and have loaded my Adobe Premiere Elements 11.0 software into it.
    In trying to view and edit a video I created on my old computer, I got "Media Pending" and "Media Offline" notices as soon as I began. The source files are located on an external drive with a permanent letter designation. I began the process of reconnecting my Project Assets files with the source files this morning, but have now encountered a new roadblock. Each time I try, I get the message "this type of file is not supported, or the required codec is not installed." It offers no information or options other than to click "OK," which is not very helpful.
    All the source files are located in one folder on my external drive. I have been able to reconnect the JPEGs and the mp3 source files but not the AVI video files.
    Here are three screenshots. The first is the "Media Offline" message, the second is the message I receive when I try to reconnect my Project Assets to the source files and the third is a screenshot of the codecs installed on the new computer.
    Here is my new computer information:
    Model: Del Inspiron 3847
    Intel Core i5-4460
    CPU @ 3.20 GHz  3.20 GHz
    RAM 8 GB
    System type: 64-bit, x64-based processor
    I hope someone can guide me. What do I need to do to solve this problem?
    Thank you.
    Message was edited by: Janie Christensen Ficara

    StreetSongs
    Thank your for the information supplied.
    But, what are the properties of this .avi file that you seek?
    Video Compression
    Audio Compression
    Frame Size
    Frame Rate
    Interlaced or Progressive
    Pixel Aspect Ratio
    Right now of prime interest is the video compression that is being wrapped by that AVI wrapper/container.
    AVCHD.avi
    MotionJPEG.avi
    XviD.avi
    DviX.avi
    other
    There are instances were a particular video compression or a particular container/wrapper format is each supported by Premiere Elements, but
    not a combo of those particular two. But, in this instance, I suspect this to be a MotionJPEG video codec issue, but your details will
    point us to the actual situation, and we will plan troubleshooting strategy from there.
    ATR

  • I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which als

    I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video.  I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video.  Do you have any suggestions?  I researched codec, but do not understand them at all.

    gloucester
    In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
    that appears at the top of this forum.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR

  • Error message when opening adobe premier 10 saved film file , this file is not supported or required codec not installed

    Hi
    Can any one help, keep getting error message,error message when opening adobe premier 10 film file , this file is not supported or required codec not installed,
    Thanks
    Colin65

    Steve,
    Not to sure what type AVI files they are, the storage devise is at present offshore on a job.
    Can you clarify, if you edit/import video footage with adobe premiere 10 and then create a file, the file or the original raw footage is not stored on computer for re-use, if it is stored, is it stored in the original format.
    Also please find details of storage devise,
    Dogcam Portable Media Center PMC-500r
    Quick DetailsModel Number:PMC-500R
    SpecificationsPMC-500R20G/40G Portable Multimedia PlayerPMC-500R 20G/40G Portable Multimedia Player, Supports
    PMC-500R20G/40G Portable Multimedia PlayerPMC-500R 20G/40G Portable Multimedia Player, Supports MPEG-4 File FormatsKey Specifications/Special Features:Video recorder: supports digital video recoding in MPEG4 from Line-in Video playback: supports MPEG4 (AVI), MPEG1 (.MPG), DVD (MPEG2,.VOB) Supports MPEG4 with 720 x 480 at 30 Frames/s MPEG4 movie playing with Fast Forward, Fast Reverse, Time search function Music playback: supports MP3, WMA, WAV Music playing with play list function MP3 ID3 information and sorting, LRC Music playing with repeat, shuffle playing function Photos view: supports JPEG and slide show, rotate, nail view Easy backup of photos in digital camera -USB OTG technology Audio recording: continues recording for over 40 hours High resolution output for HDTV (Y, U, V output; 704 x 480 (N) or 704 x 576 (P), at 25/30 frames/s) Super dlim size: 126 x 79 x 22.5 mm Games E-book with bookmark, auto turning page, page search function File browser function with Copy, Delete, HDD capacity information With 3.5" LCD QVGA TFT panel (960 x 240) Long time battery running (over 5 hours for video, and 9 hours for audio) 1.8" 20G/40G storage capacity High fidelity sound with good earphoneCompass Electronics Co.,

  • Adobe Premiere Elements 12: This type of file is not supported, or the required codec is not installed

    Hallo! I use Adobe Premiere Elements 12 on my computer (PC, windows 7). When I try do re-open my projects on Adobe Premiere Elements I get the message: This type of file is not supported, or the required codec is not installed. The file type of my saved projects is: Adobe Premiere Elements Project (.prel). The same happens when i try to re-open the auto save files. This is very annoying because I losse all my earlier work. I would be really grateful for help. Best regards, Stefan

    With the QT Player installation, you should have Apple's H.264 CODEC.
    Maybe this ARTICLE will give you some tips on the GoPro footage.
    Good luck,
    Hunt

  • I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    Hi Ali,
    I'll just add this reference to the good tips from my friend Manish (+5)
    Support for the 7800 series in CUCM 8.6.2 was first added with this
    Device Pack;
    Cisco Unified Communications Manager
    Device Package 8.6(2)(24104-1)Release Notes
    Cisco Unified Communications Manager Device Package Release 8.6(2)
    adds support for the Cisco IP Phones
    7821, 7841, and 7861 running SIP firmware release 10.1(1).
    The steps are in this doc
    http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
    You might as well install the latest 8.6.2 Device pack
    cmterm-devicepack8.6.2.24112-1.cop.sgn
    Cheers!
    Rob
    "Seek it out and ye shall find  " 
    - OneRepublic

  • This type of file is not supported, or the required codec is not installed.

    About two months ago, I was able to edit these files and create videos from them. Now I get the following message: This type of file is not supported, or the required codec is not installed.
    Aside from regular Windows updates, nothing has been added or removed from my PC.
    I’m using fully patched Windows 7
    Premiere Elements 8.0
    Canon T2I Hi def movies are .MOV

    I can't believe that tech challenged moi is replying to the codec issue.  I bought a new computer with Windows 7.  I won't go into the tech issues with a Windows update....   Anyway I downloaded Photoshop Elements 8 and figured out how to import my photos and videos to Photoshop on the new comptuter.  Photos were fine but videos wouldn't play.  I got the messages about Apple's Quicktime required and then the "required codec is not installed".  I went "What is a "codec"!
    I downloaded Quicktime which went smoothly but I still had the "required codec not installed" message to deal with.  I researched and found that it referred to compressed/decompressed files(?)  Next I googled "Windows 7 codec download" (not even sure if there was one).  There was!   I clicked on the first result and downloaded the codec.  The info stated that this codec should read 99.9% of video files.  Went back to Photoshop and clicked on the blue video thumbnail.  It worked!!!  The video played just as it did on the old computer.
    Hope this helps someone else.  Now why would Windows 7 not include this codec in the first place.  I never had to download one before on other computers.  Only Quicktime needed downloading.  Oh, well.
    Maggie

  • Adobe 9 Premiere Elements "file not supported or codec not installed"?

    I am trying the Adobe Premiere Elements 9 trial version to determine if I should upgrade from Premiere Elements 7.  I was able to perform a "get media" on an AVI file and was able to create a DVD (including menus and chapters) that I can view in my DVD player in PE7.
    I decided to create the same DVD project using PE9 so I could compare both programs.  When I perform a "get media" on the same AVI file in PE9, I receive the following message: :This type of file is not supported, or the required codec is not installed."  I'm not sure why I was able to successfully process the AVI file in PE7 but not in PE9.
    The AVI file characteristics are Video: 640(w)x480(h), data rate: 1329kbps, bitrate: 1448kbps, frame rate: 29 frames/second; Audio: bit rate: 118kbps, channels: 2 (stereo), sample rate: 48 kHz.
    Anyone have any ideas or suggesstions?  Thanks!

    Chris,
    There are probably 2000 possible CODEC's, with all the variations and tweaks, that can be placed in an AVI wrapper. Recently, some camera mfgrs. have begun wrapping H.264 material, tweaked from the norm, inside of AVI's. Why? I have no clue, but those cause all sort of issues with NLE programs - yet it is being done. To a lesser degree, the same can be said for MOV, WMV and even MPEG/MP4 wrappers. Knowing the file's format is meaningless, especially with the above cited case of H.264 inside of an AVI.
    The great free utilities, G-Spot, or MediaInfo, will tell you pretty much all that you need to know about the file(s).
    Premiere Elements, and also PrPro, are designed to work well with myriad file types, and specs., but certainly not all. PrE handles some consumer file types, better than its "big brother," but PrPro handles many professional file types, that PrE cannot touch.
    I have CyberLink's PowerDirector (older version), and Magix MovieEdit Pro (also older), as each handles some specific file types and specs., better than either my PrE, or PrPro. Along wil those, basically used as converters, I have a great conversion program, DigitalMedia Converter 2.7, and will often take "odd" material into it, to be batch converted to something that PrE, or PrPro loves, like DV-AVI Type II's, for SD material.
    The world of Video is very involved, and one needs to grasp the concept of CODEC's very early on, as they are the building blocks of Video files (and Audio files too). Each quarter, there are probably a dozen new ones, or variations on older ones, utilized by camera mfgrs. For a bit of background on CODEC's, see this ARTICLE. [Could be linked from the earlier article?]
    Good luck, and let us know what is inside that AVI wrapper. Someone will know how best to handle it.
    Hunt

  • SCCP is not supported on Cisco unity express?

    Hey,
    I was reading some integration (with CME or CUCM) articles on interweb and somehow I got this impression that SCCP is not supported or working well on CUE... MWI will be using SIP if CUE and CME are integrated, what about CUCM?
    I checked SCCP Compatibility matrix and there is no information of CUE...
    So I am here asking this questions: SCCP is not supported on unity express?
    Thanks,
    Shuai

    Jaime (+5)
    CallManager for Cisco Unity Express Configuration Example
    http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a0080289ef0.shtml
    HTH
    Jorge Armijo
    Please remember to rate helpful responses and identify helpful or correct answers.
    Jorge Armijo
    Please remember to rate helpful responses and identify helpful or correct answers.

  • Tried Most Everything... Error Type of file not supported... codec not installed

    Hi Friends: I have been battling with the error message of ... "Type of file not support or codec not installed."  I have been throughout the forums searching for answers and attempting various suggestions.  I am stumped and am reaching out for some wisdom and help.
    1.)    System Gateway – T-6859u, Intel Core 2 Duo T6400 2Ghz, 4 Gig ram, Problem has existed on both Vista and upgraded Windows 7.  I have used Premiere since Premier 5 (Full version not elements) including versions 6 and PRO.  I have Elements on my laptop for convenience.
    2.)    Assets- Problem exists with all AVI files.  This includes files that worked previously but will no longer be recognized.  I have used Elements since version 7 was new.  It is only the last 4 months this has been and issue.  These are AVIs that previously working in Elements 7 from Panasonic DV camera and other DV sources. 
    3.)    Problem first appeared when Windows Update installed security patch KB975560.  Once the Security patch installed Premiere quit running AVIs.  When the patch was removed Premiere worked again. However, windows update continued to reload the patch.  The patch has now been removed and prevented from reloading.  However, the problem now persists.
    4.)    Other attempted repairs.  Reloading Premiere Elements 7, Upgrading to Windows 7, Removing and reinstalling K-Lite Codec packs inc standard and 64bit.  Loading LEADTOOLS.  None has repaired the problem  All the AVI files playback fine in other programs including Windows Movie Maker, Media Player Classic, WM player etc.
    I'm not sure what to do next.  I have been a dedicated Premiere user for so many years, I don't want to switch to another program.  Any suggestions friends?
    DrMark1105

    Welcome to the forum.
    What version of Apple's QT Player do you have installed?
    PrE relies on this much more than its big-brother, PrPro, until CS5.
    From my experience, QT  7.5.5 was my "last known good," and some problems have been reported with the 7.6.2 and 7.6.3 versions. 7.6.6 is out, and works well for many Adobe users.
    I would investigate updating QT Player.
    Also, FFDShow, an element in K-Lite has been death to PrPro for many people. Just having it installed brings PrPro to its knees.
    Though Adobe hides its CODEC's pretty well, K-Lite has been known to shift the priority of the Adobe MainConcept CODEC's. While it does not overwrite them, or delete them, it sets up some of its CODEC's to take priority. There are some older threads on Registry editing and utilities to reset the priority of the Adobe MainConcept CODEC's. Seems that Robert Johnson participated in those discussions and may have furnished the link to at least one utility.
    Those are all the thoughts that I have now, and none might be of use.
    Good luck,
    Hunt
    PS - Robert has not been around here lately, but does spend time on the Muvipix Community forum. I'd post there in the PrE 7 forum, and ask if anyone has any ideas too.

  • Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file

    Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file
    How do I fix this?

    That would probably be a question best taken up in on a site for Windows support questions. Not knowing anything about the movie you're trying to play, all I can suggest is to confirm that the format of the movie you wish to play is supported in your version of WMP. If it isn't, you'll either need to convert the movie or use some other player software.
    Regards.

Maybe you are looking for