CSCul66951 LDAP routing query fails when user name is the same (6 july 2014)
in the case CSCul66951 LDAP routing query fails when user name is the same it is mentionned that the version 8.0.2-055 correct this bug ? How come i don't see this version on my menu Available upgrades from my IronPort C370 ?
Is there someone on the support team that have try this LDAP query on a IronPort C370 with this version in the development lab ?
Do i have to open a support Case to have this version of AsyncOS ?
Best regards,
Benoit Belair
University of Quebec in Montreal
Yes - CSCul66951 - this was included w/ the 8.0.1-HP1, and is rolled into 8.5.6-074 GA release.
See release notes, resolved issues:
http://www.cisco.com/c/dam/en/us/td/docs/security/esa/esa8-0/release_notes/ESA_8-0-1_HP1_Release_Notes.pdf
CSCun02766 - 8.5.6-063, which was superseded by the 8.5.6-074 GA release.
See release notes, resolved issues:
http://www.cisco.com/c/dam/en/us/td/docs/security/esa/esa8-5-6/ESA_8-5-6_Release_Notes.pdf
Similar Messages
-
How do I move my iTunes account to another user name on the SAME computer?
Hi,
My kid was the first in my family to get an iPod. When we created her account, since she is young, I put it on my laptop under my user name. Months later, I decided to get an iPod and when I went to set up an account, it wouldn't let me. My neice told me that I had to set up a new user name account on my computer for the new itunes account. I did this, but now I find that this is TOTALLY inconvenient. My computing is done under one user name and, yet, to sync my iPod I have to log out of all of that and go into the other user name. I HATE this -- had I realised this would be such a pain in the neck, I never would have set up my daughter's account under my user name. Is there a way that I can move my itunes account to MY user name and move my daughter's to the other? Can I have them both under one user name? Thanks for any help/adviceWelcome to AD!
Each windows user has an itunes database file that has ratings, playcounts, etc.
It is named iTunesLibrary.itl
So in addition to putting the music in a shared location as Neil suggests, you need to swap your ITL files from each account.
Here is a good background article on that, you are using method 1. My advice is to stay far away from method 3, it's too easy to forget which ITL file itunes last used.
You could also switch to method 2. I used that for several years until my husband started using iTunes and I did not want his play counts in my library.
http://support.apple.com/kb/HT1495 -
Follwing query fails on one database, but the same works on other Database
Hi,
The following SQL fails on one database with ORA-01722 but the same works on other database.
SQL> SELECT i.version, d.name, i.instance_name, i.host_name
FROM v$instance i, v$database d, v$parameter p 2
3 WHERE p.name = 'instance_number'
4 AND DECODE(p.value, 0, 1, p.value) = i.instance_number;
AND DECODE(p.value, 0, 1, p.value) = i.instance_number
ERROR at line 4:
ORA-01722: invalid number
both databases are at same version (10.2.0.1) both are on same machine.
Initailly I suspected NLS settings, I am surprised to see NLS settings are also same on both the databases.
Any thoughts why is it happeningThanks for the reply
Yes, i know that i am comparing varchar against number.
bu there is no way that the database where the query is working has correct types on both sides as the tables are standard oracle dictionary tables.
Yes, i tried this earlier, it works
AND DECODE(p.value, '0', '1', p.value) = to_char(i.instance_number)
it is very weired to see that error, i feel it something else that causing the trouble. -
trying to set up my new ipad 3, my first Apple product. trying to use Gmail account and it insists that user name or password is in correct. It is not my username on Google is the same as my email. Please advise.
1. Sign out of old ID
2. Reboot
3. Sign in with new ID -
How to add a separate community of user (customer) in the same REALM?
I have an existing default REALM we have been using for internal users (i.e employees). Now I have a new community of users (i.e customers) but I want to use the same REALM and the same policy but be able to separate those two communities into two different containers.
current realm where employee accounts are: cn=users, dc=mycompany,dc=com
I want to be able to add customer accounts in the same realm but I need also those customers accounts to not be viewable when a user perform a search in the directory using the self service console.
How do i do that? I have been researching the documentation but I'm not looking for what I need.
Any help really appreciated.I guess that this was the main reason to have multiple realms.
When users are in the same realm your ACI covering the subtree (cn=users in this case) allow people to search in this realm.
You could of course add a special attribute to the orcluserv2 or create a new objectclass customer with this attribute. Then - when you create a new user in the realm this needs to ba added. However - this is far from trivial - and furthermore you need to ensure that all tools (eg oiddas) support this - which is even more difficult to accomplish.
In the past I have done this in the following way:
Created a subtree cn=regionalmanagers,dc=mycompany,dc=com
Within this tree I had entries that were composed with my own objectclass. This objectclass contained a group (uniquemembers) and I added the users (cn=John.Doe,cn=Users,dc=mycompany,dc=com) to this group. Then I checked from the application with dbms_ldap calls if a user was a regional manager.
cu
Andreas -
Signing up for fon Fails (invalid user name or pas...
Hello, We've been trying to sign up for fon and it keeps giving us the same error message! Invalid user name or password. The user name is the one on our contract also our email address. [email protected] this is working ok for emails etc. The password is likely the problem!! We've tried the original password provided on the contract (a bunch of letters and numbers) We've have changed our password to something specific to us! This does not work! Whilst having problems with email online support suggested we change our password again, so we did change password about a month ago! This also fails to work? So our email address and current working password for email access does not work! Can anyone tell s which password we should use or how we can get to sign up for fon! Chris
Crizdee wrote:
Hi, Thanks for the replies. The password provided when we signed I have tried many times and nada! I've read the FAQs and they say you can change your password so think this is the confusion? The fact we have changed passwords a few times! I'll see what support comes up with. Chris
If you cannot opt in using the FON page, then there must be an issue somewhere.
You have to use your full [email protected], which I expect that you are doing.
You will have to try the BT Openzone/FON helpdesk, and see if they can see what the issue is.
This is the signup page
https://www.bt.com/wifi/secure/optin.do
Just to confirm, this is the page you should be using to login.
https://www.bt.com/wifi/secure/status.do?s_cid=con_FURL_btfon/status
All new users are opted in by default, so you may find that that is the case for you, and the reason it is failing.
Have you tried the normal login page ?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Post Author: dmface15
CA Forum: Administration
I am working in a new enviorment and i am trying to save a report to the Crystal Server via the CMC. I am uploading the report from the objects tab and attempting to save to a folder. The report has 1 static defined parameter and that's it. When i click submit to save the report i receive the following error message: "There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder." There is not a anothe report within the folder with that name. What could be causing this error message and equally important, what is the solution.hte message you received about duplicate user probably means something hadn't fully updated yet. Once it did then it worked...
Regards,
Tim -
I was downloading a app from the app store and it downloaded about 85% then gave an error message download failed but when I reopen the app store to the purchases the resume button show but when i click it the same error comes up failed to download
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
JohnI have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John -
I have a Mac that was part of the recall involved with the faulty Seagate hard drives. The folks at the Apple Store near me changed the hard drive early December, 2012. I had my data, etc. all backed up on a portable hard drive. When the Mac was returned with the new hard drive, I used the Migration Assistant to bring everything back over. Trouble was, it wouldn't let me bring it over to my original user name. I was forced to create a new user name that became the place where everything was restored. I can't see any data on my old user name, just the basics. Everything is on the new user name but I wish I didn't have it (just want everything back the way it was originally). Any suggestions?
Probably the cleanest thing to do is to erase and freshly install the operating system on the new drive. Then, on the first boot up, don't create a new user, instead select the option in Setup Assistant to immediately bring things over from your backup, which you must connect via USB or firewire. Setup Assistant will then recretae your old user to look just like it used to.
Before doing this, make sure you realize you will lose everything on the new drive by erasing it, and make sure your backup is still viable. -
Function not found when package name exists with same name as schema name
Hi all, any help would be appreciated :)
I found an issue with pl/sql resolving a functions location when the db has a package name with the same as the db schema name.
My example:
-- arbitrary test function, not in any package
create or replace FUNCTION testFunc
inTest IN VARCHAR2
RETURN VARCHAR2
AS
BEGIN
RETURN 'a';
END;
-- There is a package called "FM" with functions that are not referenced or used in this example and the db schema is "FM".
-- The following PL/SQL fails with the message: "ORA-00904: "FM"."TESTFUNC": invalid identifier"
select cursor (select testFunc('a') from dual) from dual;
-- The following PL/SQL works:
select * from (select testFunc('a') from dual);
As mentioned the function testFunc is NOT in the FM package. This issue does not happen when I remove the FM package. So it seems like there is an issue with cursors calling functions when there exists any package with the same name as the db schema.
Can anyone tell me why this happens and also what I can add to force the function that is not in any package to be referenced (without Oracle trying to look in the FM package)?
DB: Oracle 11.2.0.2
thanks!
PaulHi Paul,
In general I would not advice to have schema and objects with the same name.
Here is what documentation is saying here: How Name Resolution Differs in PL/SQL and SQL
PL/SQL uses the same name-resolution rules as SQL when the PL/SQL compiler processes a SQL statement, such as a DML statement. For example, for a name such as HR.JOBS, SQL matches objects in the HR schema first, then packages, types, tables, and views in the current schema.
PL/SQL uses a different order to resolve names in PL/SQL statements such as assignments and subprogram calls. In the case of a name HR.JOBS, PL/SQL searches first for packages, types, tables, and views named HR in the current schema, then for objects in the HR schema.As you can see above when using PL/SQL for your case Oracle searches first for packages, types, tables, and views named FM in the current schema, then for objects in the FM schema.
And because a package FM is found it is raising an error due to the fact that the procedure could not be found in that package.
I hope this clarify.
Regards.
Al -
Hi,
Since we implemented Cisco ISE we receive the following failure on several Notebooks:
Authentication failed : 24408 User authentication against Active Directory failed since user has entered the wrong password
This happens 2 or 3 times per Day. So basically the authentications are working. But when the failure appears, the connection is lost for a short time.
The Clients are using PEAP(EAP-MSCHAPv2) for Authentication. We've got a Cisco Wireless Environment (WLC 5508).
Why is this happening?
Thanks,
MarcThe possible causes of this error message are:
1.] If the end user entered an incorrect username.
2.] The shared sceret between WLC and ISE is mismatched. With this we'll see continous failed authentication.
3.] As long as a PSN not receiving a response from the supplicant within this limit during an EAP conversation, it will throw this error code. In majority of cases it says eap session timed out.
In your cases, the 3rd option seems to be the most closest one.
Jatin Katyal
- Do rate helpful posts - -
How to fetch the current login user name at the BI system
Hi,
In our scenerio we need a query to fetch the current login user name at the BI system. Would you please suggest the possibilities?
Thanks and regards,
PradipHi,
The current login id will be available in text elements of query.
Regards
Akhan -
Is it possible to get the active directory user name of the person
Is it possible to get the active directory user name of the person who is logged onto a windows computer, when they are using your coldfusion site, the same way asp pages can do that?
SECOND TRY TO POST THIS REPLY
You have to turn on "Windows Integrated Security" and turn off anonymous login in the IIS web server, once that condition is met the cgi.AUTH_USER variable will be popluated with the domain/username of the user logged into the cient computer.
If the user is using a windows browser on a windows client computer this will be done silently in the background. Otherwise they will normally be presented with a login dialog box by the browser. -
Is it possible to display an Alert when user clicks on the X on the browser
Hi
Is it possible to display an Alert when user clicks on the X on the browser.I saw some threads regarding this mentioning about js.I want to do this ins the iProcurement module and dont wnat to make changes to each and every page.
isn't there any global setup which would help to achive this?Are you talking about Windows close X. If yes, then to my knowledge there is nothing in OA Framework to handle it. You can check if it can be handled using javascripts.
Maybe you are looking for
-
Hi, I purchased our iMac 4 with Tiger OS X some time ago (2007) and until recently had absolutely no problems....and then, we met the Snow Leopard. I added the 2GB of memory without a hitch. Backed -up what needed to be backed up to an external hard
-
Problem mit öffnen mehrerer PDF's in Adobe Reader X
Hallo Adobe Community Ich habe ein Problem bei einem unserer Kunden mit Adobe Reader X. Es besteht das Problem, dass das öffnen von mehreren PDF Dateien nur verzögert möglich ist. Es wird jeweils das erste angeklickte PDF ohne Probleme geöffnet und a
-
Im so confused! i need help! my computer crashed, now my cards arent good...:(
ok so heres the problem... i was downloading itunes latest version, and i was also on the itunes store. i redeemed a $15 dollar card and a $25 dollar card, then my computer crashed and my account ran dry to the amount beofre at .92 cents. now when i
-
How do I access Bridge CS6? I downloaded the CS6 Beta and cannot access Bridge CS6 only Bridge CS5.
-
help please, when I add an image and then look at it in live view I just get a holder with a question mark, however if I up load the page the image is displayed properly, can anyone tell me what I am doing wrong please?