CSCur37347 - CSM 4.6sp1 find usage shows "Unable to display any data"

Is there any solution for this issue at the moment?
The suggested workaround (Recreate the CSM index using CSM Client > Tools > Cisco Security Manger - Administration > Customize Desktop > Recreate Index.) helps for a few minutes.

Hi Ben,
Is there a way I can collect more relevant statistics
about network usage with SunMC, using the "MIB-II
Instrumentation" module, or something else within
SunMC?It sounds like a general problem with PRM: though if the Data Availability tab shows it's pulling Kernel Reader data every hour, then it should show your MIB-II info as well.
Even then octet counts aren't terribly useful: they're just big numbers that get bigger: you really need to see rates over time to get an idea of what your network is doing.
You could try the SystemMonitor module that's part of PlusPack:
http://www.halcyoninc.com/products/PlusPack/help/SystemMonitor/HALSolarisSystemAlert-network-h.html
It shows MB/minute rates for each interface. If that's the type of info you need then you can enable those numbers for PRM or Reporter instead.
Regards,
[email protected]
http://www.HalcyonInc.com

Similar Messages

I find I am unable to print any photo because the program "Can't find a theme and the Print command wont work without at least one theme. How can I overcome this problem?

I find I am unable to print any photo because the program "Can't find a theme and the Print command wont work without at least one theme. How can I overcome this problem?

reinstall iPhoto
see this discussion down a few from your post
https://discussions.apple.com/thread/5426566?tstart=0
LN

Is IE5.5 unable to display Spry Data?

I've just finished adding a Spry Accordion to a page that's
populated with Spry Data (XML data set from a MySQL table). The
Accordion widget and data displays properly in Firefox, Opera, IE7
and IE6 but fails in IE5.5. Likewise, Spry Data in Spry Tables
doesn't appear in IE5.5.
Is IE5.5 simply unable to display Spry Data?

I'm developing my current project on a local development
server, so I don't have a URL to show. However here's an example
I've since found on the Adobe Labs site that exhibits the same
behavior on my standalone installation of IE 5.5.
http://labs.adobe.com/technologies/spry/samples/accordion/AccordionSample2.html
I'm guessing that IE5.5 doesn't fully support XMLHttpRequest.
So, I may just have to see if my clients think we can afford
to abandon IE5.5 users or if I need to look for an alternative to
the page I just developed. (Grrrr, I'm really tired of considering
eight year old browsers.)
Thanks for your response.

How can i find the tables which dont contain any data under my database ?

Can you please suggest me a way to find the tables which dont contain any data under my database ?
Regards,
Renu

Can you please suggest me a way to find the tables which dont contain any data under my database ?
For the schema that you've logged in to, you could do something like this:
test@XE>
test@XE> @test
test@XE> --
test@XE> set serveroutput on size 1000000
test@XE>
test@XE> declare
2    n_count number;
3 begin
4    for rec in (select object_name from user_objects
5                where object_type = 'TABLE')
6    loop
7      execute immediate 'select count(*) from '||rec.object_name
8      into n_count;
9      if (n_count = 0) then
10        dbms_output.put_line(rec.object_name);
11      end if;
12    end loop;
13 end;
14 /
BONUS
RUN_STATS
PL/SQL procedure successfully completed.
test@XE>
test@XE>For the other schemas, you could query from dba_objects and probably display the owner as well.
HTH
isotope

I updated to itunes 11 and I installed it but when I opened up itunes only little icons would show, it woulndt display any words or letters

I updated from itunes 10.7 to itunes 11 and I installed it but when I opened up itunes only little icons would show, it woulndt display any words or letters.
so then i tried uninstalling and installing back the old itunes and it wouldnt open at all. i put back the new itunes n it opens but still wont show any words?

That's consistent with trouble with the Segoe UI fonts on your system.
If you're using Windows XP or Windows Vista, try Vortical's technique from the following post:
Re: iTunes 10.1 Missing Text
But if you're using Windows 7, try itunesTRK's suggestion from the following post:
menu bar invisible

Battery Usage Screen won't display any (app) data

Hi Folks.
I was so lucky that I've got a new iPhone 6 just 20 mins after inital sales here in Germany. On my way to the office in the morning I checked the device, and I really liked the Battery Usage feature. Waited so long for that. However, back in my office I connected the device with my Mac to install my last backup from my old iPhone 5s. That worked as designed, pretty good and without any issues.
But now the Battery Usage Screen that can be found under Settings > General > Usage > Battery Usage is empty. I only see a switch between the last 24 hours or 7 days, and thats it. There is a hint saying that I have to use the phone for a few minutes unless data is available, but I used it quiet a lot in the last two days Reboot haven't worked, same with killing the Settings app.
Does anyone have the same issue? Google don't know anything yet, same with this board here.
Thanks for any answer...

Mine started working today. I did reset settings in Settings -> General -> Reset -> Reset Settings. It took about 20 minutes for it to start working and I'm not 100% sure if this is what fixed but I thought I'd pass it along.

Unable to display table data in Review View

Hi Experts,
I have one main view and one review View .In my main view i have one table (Normal Table) and several other input feilds and text views....
If i click on review button in my main view, am able to see all the data in review view except table data.
How can i get the table data which i have entered in main view.. the same should display in review view.
I binded the same node in both main and review. and node is defined under component controller.
Any ideas?
Regards
Farooq.

Hi,
I think you already binded in review view also with same node. right? So data will move automatically and display in
review view also. In WDDOINIT of review veiw read data from that node and use bind_Table.
Cheers,
Kris.

[Solved] CUPS: Unable to write print data: Input/output error

I'm filling this for the benefit of those poor googlers that can reach here.
Symptoms: After trying to print a "complex" image the printer made too much breaks, and failed.
The problem is, it then didn't came up. I mean, I restarted the printer, cupsd, the whole system, and nothing.
I was unable to print again, it showed "Unable to write print data: Input/output error" and refused to print anything.
I then saw that in /etc/cups I had printers.conf and printers.conf.O files, which differed (other than in StateTime), that printers.conf.O had
State Idle
but printers.conf had:
State Stopped
StateMessage Unable to write print data: Input/output error
Reason paused
Probably due to the ErrorPolicy being stop-printer.
So seeing I followed the following steps:
Stop cups
Replace printers.conf with printers.conf.O (I could also had manually edited it)
Start cups
It then went working flawlessly.
There was probably an option in the web interface combobox for doing that. The problem is that I didn't realise it was stopped, so didn't know how to make it work. Moreover, some posts in the web recommended reinstalling the printer (which would skip the problem by creating a new printer).

I think that I had this same problem, and fixed it by reinstalling the printer. Thank you for your post.

Unable to find Project Show Categories in the JDeveloper main menu

Hello -
I am as new to OAF development as it gets...
I have the same questions that were asked in the forum already on this posting: Unable to find Project > Show Categories in the JDeveloper main menu
However, the questions were never answered and I cannot reply to that posting.
Here are the original questions...
I am working on tutorials in Jdeveloper 10.1.3.3.0.
Can any one of you know about "Show Categories"
Unable to find Project > Show Categories in the JDeveloper main menu Jdeveloper 10.1.3.3.0
I am looking this example and try to create the same from C:\p9172975_R12_GENERIC\jdevdoc\WebHelp\toolbox\labs\lessons\search\exercise.htm
See Step 1.3 Organize Your Project Into Categories.
Question 2) I didnt understand Step 2 also.
Select the TutorialLabs.jpr project in the Navigator, right-click and select New Business Components Package... from the context menu.
I am unable to find New Business Components Package.
Please help. Thanks!
Steve

Hi Steve,
Have you created new OA workspace for that ?
Also check this link for JDev setup and running helloWorldPG:
http://sushantsharmaa.blogspot.in/2012/09/jdeveloper-setup-for-oa-framework.html
--Sushant

My iPad appears to have hidden data. My usage shows 13gig but my list of uses only adds to 1.5gig. I am also getting messages that my iPad is almost full.

My iPad appears to contain hidden storage data. My usage shows 13gig but. My list of usage only shows 1.5gig and I cannot find where the discrepancy is. When I try to download my first movie I get a 'not enough space' message.

You simply need to get hold of an external HardDrive and move some of your bigger files (e.g.. Music, Videos, photos) to that drive and free up some space. Alternatively get a bigger HardDrive put i your Mac. It will slow up drastically with very little roo left.
Cheers
Pete

Activity monitor says I have 1 -3% of System Memory free, yet CPU usage shows less than 10% total of all processes

Activity monitor says I have 1 -3% of System Memory free, yet CPU usage shows less than 10% total of all processes

I think you should review what you wrote. There is no question, hence, my reply. I can't tell by the AM listing what applications are using memory. You need to click on the Real Mem column once or twice to display in descending order.
Aside from what you see in AM, what exactly is your problem or perceived problem. You are very low on Free Mem at the moment the screen shot was taken. Those displays are not depicting your computer's instantaneous memory usage.
About OS X Memory Management and Usage
Using Activity Monitor to read System Memory & determine how much RAM is used
Memory Management in Mac OS X
Performance Guidelines- Memory Management in Mac OS X
A detailed look at memory usage in OS X
Memory Usage Performance Guidelines- About the Virtual Memory System
Understanding top output in the Terminal
The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.
Adding RAM only makes it possible to run more programs concurrently. It doesn't speed up the computer nor make games run faster. What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent. It will improve the performance of applications that run mostly in RAM or when loading programs.

I am unable to drag any playlists to my ipod- the circle with red line through it shows up- what is up ?

I am unable to drag any playlists to my ipod- the circle with red line through it shows up and precludes it from being accepted- what is up ?

Though I have doubts for success, you might try a SMC reset. It can do no harm. Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
http://support.apple.com/kb/HT3964
Ciao.

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date is created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD

New to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

new to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

So where is LR trying to copy the files? Check your destination in the Import panel at the right.

Can anyone tell me how to slow down a commerical track in Garage Band 10.00. I was able to do it quite easily before I updated, but now find I am unable to do it. Would be grateful for any help

Can anyone tell me how to slow down a commercial track in Garage band 10.00 I was able to do this in the earlier version of Garage Band quite easily and it is a good tool for being able to teach new dances, but I find I am unable to do it in the new version, which has just been updated. I would be grateful for any help.

Just found it.
Select your track with song imported from iTunes, open the Track Editor window, and in the head of the track editor and press the "Flex" marker. Make sure "Enable Flex" is set,
Then change the tempo of your project.

CSCur37347 - CSM 4.6sp1 find usage shows "Unable to display any data"

Similar Messages

Maybe you are looking for