CSCur62528 - ISE loses network connectivity after upgrade to 1.3

still not working with the new version ....
appliance network cards still get messed up during upgrade process .

For clarity, are you saying that you used ise-upgradebundle-1.2.x-to-1.3.0.876.repackaged.x86_64.tar.gz to upgrade and your NICs still swapped?
If this is the case and your ISE is Live, then a call to TAC is in order.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question.  Otherwise, feel free to post follow-up questions.
Charles Moreton

Similar Messages

  • My Mac Pro loses network connection after wake from sleep since Yosemite upgrade.

    Mac Pro loses network connection after wake from sleep since Yosemite upgrade. Any one have this issue as well. And is there a work around?

    Wi-Fi?
    Wi-FI connection drops
    Wi-Fi Problems in OS X Yosemite
    Wi-Fi Problems in OS X Yosemite (2)
    Wireless Diagnostics
    Also try turning off Bluetooth.
    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)

  • FP1600 loses network connection after a few hours

    My FP1600 loses its network connection after a few hours. It is part number 185690C-01, with firmware 4.11. I am running FieldPoint Explorer version 3.0.1 and LabView 6.1 from Windows XP Professional. I set it up, and everything runs fine for 4 hours or more. I do not have the network watchdog enabled, and the FP1600 is in constant communication with the host computer in any case. Sometime in the middle of the night the communication is lost. The FP1600 link light
    is on, and it is still receiving packets, but it will not respond to a ping or any other communications. Only a power cycle brings it back. The FP1600 is sitting right next to the host computer, both attached to the same network switch. There is no interruptio
    n of network services to the two.

    Hi Heinz,
    We are also trying to troubleshoot this same problem (Intermitten network connection loss with FP1600 Ethernet Module - Error code "33163", Error Message - "FP1600 Connection to module has been lost."). We have checked other possible causes for this sort of behaviour. Including independent assessment of netowork availability at the time of error reporting, connecting dedicated power supply to the FP1600 module, temperature of cabinet housing the module (which is between 10 and 50 deg C), disconnecting sensors connected to various I/O modules connected to this module, increasing duration of parameter "time out" (the time module will wait before reporting an error if it can not access network). However, none of the above resolved the intermittent and random network loss errors.
    The MAX version is 3.0.2, and the firmware on the module is 4.17, Labview version is 7.0 and the Operating System is windows NT.
    I was wondering is there any information about this problem from any user or NI recently. The only solution looking in to this discussion forum seems to be replacing the module.
    MehulMessage Edited by MPatel on 02-28-2005 08:16 PM

  • No network connection after upgrade to ios4.2.1

    I just upgraded my iPad to the new ios4.2.1. Everything looks good except for the most important feature, the network connection.
    My iPad does connect to my wireless accesspoint but refuses to accept or get an ip address from the dhcp server. After a while it gives itself an ip-address but that does not give me internet access.
    I tried restoring to the previous ios but that does not seem to be possible with iTunes.
    Any thoughts????
    Thanks in advance.
    Ruud

    I found the solution myself:-)
    I reset the network settings on my iPad and everything was fine again.

  • Lose network connection after sleep on iMac but not MacBook

    The subject line says it all:
    I installed an Airport Express card on my old Rev A iMac when I got my new MacBook and an Airport Extreme Base Station.
    The MacBook can go to sleep and, when I "wake" it up, it's ready to go.
    After the iMac goes to sleep, its network connection is lost and I have to log back in.
    Any way to fix this so the iMac stays logged in?

    Haven't received a response but didn't want this hanging out there unresolved. Posted same question to Airport forum in hopes of a response there and marking this "answered."

  • I lose network connection after MacBook Wakes from Sleep

    I upgraded to Mountain Lion on my 27" iMac and 15" MacBook Pro. iMac is doing fine. MacBook Pro, however, when it wakes from sleep, seems to have the network untility crash.
    So the computer wakes from sleep, and the little status bar radar thing does its little sweep and doesn't just go solid. . If I click on it, it shows my Airport as connected, but after clicking, it freezes. the second to the bottom bar goes solid and the cursor becomes a spinning beachball. If I open system preferences, and select network, it freezes. The only way I can seem to get back on line is to reboot. I have an airport extreme with an older (g) airport express that I use to beam music to my stereo. The MacBook Pro is about 2009 vintage—you can still get to the battery, HD and memory—and the iMac is a bit later. One of the first 27" models, not quad core.
    Anyone else having this problem? What more info would you need to help resolve? I'm a novelist and this is killing my productivity.
    Thanks,
    Steve
    http://stephenstark.me

    Try the basics first:
       Change your router channel number.  Most times this works & is all you have to do.
    Disconnect & reconnect your modem.  unplug it for about 10 seconds.  Plug it back in.  Do the same for Apple’s routers.  Wait for everything to reboot.
    System Preferences>Network
    Click the Assist Me button.
    In the next window that pops up, click the Diagnostic button & do the necessary.
    Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer.   See these basic networking KB Articles:  http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
    http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
    Manually provided DNS server addresses are higher priority than DHCP's
    http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    ============================
    What to do when you can't connect to the Internet
    Also, run the Airport Utility app which is located inside the Utilities folder.
    =====================
    If using a  Linksys router, contact LinkSys Customer Support and/or post in their forums.
    If using Apple's Airport, please re-post over in one of the AirPort Forums.

  • I loose my home network connectivity after my iMac is awaken. This began after I upgraded to Lion. Is there a fix to this problem?

    I loose my home network connectivity after my iMac is awaken. This began after I upgraded to Lion. Is there a fix to this problem?

    see if this article helps: http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

  • Can not setup network connection after netctl 1.10 update

    I'm using netctl's ifplugd service to automatically manage my network connections (LAN), however after latest update to netctl (1.10) I can not connect to other machines or internet anymore and I must downgrade to netctl 1.9.
    Related netctl service:
    [email protected]
    My network connection profile: /etc/netctl/mynetwork
    Description='A basic static ethernet connection'
    Interface=enp2s0
    Connection=ethernet
    IP=static
    Address=('192.168.1.1/24')
    #Routes=('192.168.0.0/24 via 192.168.1.2')
    Gateway='192.168.1.254'
    DNS=('192.168.1.254')
    ## For IPv6 autoconfiguration
    #IP6=stateless
    ## For IPv6 static address configuration
    #IP6=static
    #Address6=('1234:5678:9abc:def::1/64' '1234:3456::123/96')
    #Routes6=('abcd::1234')
    #Gateway6='1234:0:123::abcd'
    Related bits from journald:
    Jan 23 01:13:36 arch ifplugd[251]: ifplugd 0.28 initializing.
    Jan 23 01:13:36 arch ifplugd[251]: Using interface enp2s0/00:23:54:2C:CE:94 with driver <ATL1E> (version: 1.0.0.7-NAPI)
    Jan 23 01:13:36 arch ifplugd[251]: Using detection mode: SIOCETHTOOL
    Jan 23 01:13:36 arch ifplugd[251]: Initialization complete, link beat not detected.
    Jan 23 01:13:36 arch kernel: IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
    Jan 23 01:13:36 arch acpid[246]: starting up with netlink and the input layer
    Jan 23 01:13:36 arch acpid[246]: 1 rule loaded
    Jan 23 01:13:36 arch acpid[246]: waiting for events: event logging is off
    Jan 23 01:13:37 arch kernel: floppy0: no floppy controllers found
    Jan 23 01:13:37 arch kernel: ATL1E 0000:02:00.0 enp2s0: NIC Link is Up <100 Mbps Full Duplex>
    Jan 23 01:13:37 arch kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
    Jan 23 01:13:37 arch acpid[246]: client connected from 256[0:0]
    Jan 23 01:13:37 arch acpid[246]: 1 client rule loaded
    Jan 23 01:13:38 arch ifplugd[251]: Link beat detected.
    Jan 23 01:13:39 arch ifplugd[251]: Executing '/etc/ifplugd/netctl.action enp2s0 up'.
    Jan 23 01:13:39 arch ifplugd[251]: client: <3>Could not start any suitable profile
    Jan 23 01:13:39 arch ifplugd[251]: Program execution failed, return value is 1.

    This problem hit me too. I have a static IP address set up on a server, I upgraded netctl to 1.10 and it took me a couple of hours to work out why, after the upgrade, my network would not work. The messages were not helpful as I performed netctl starts, stops and status, or ip link commands. In the end I got the server back up by using ifconfig, ip addr add, ip route add etc. Then I found this forum entry (Thank you siavashserver and jouke!).
    While the solution can be found in the netctl manual, it is a little obscure. I think this deserves the status of a bug. I don't think a simple upgrade should allow a whole class of users (everybody with a static ip address) to lose network connectivity without warning.
    Even the (upgraded?) /etc/netctl/examples/ethernet-static file fails to include ExcludeAuto=no, so the documentation (at least in this regard) is faulty.
    When I performed the upgrade I was warned
    New optional dependencies for netctl
        openvswitch: for Open vSwitch connections
        ppp: for PPP connections
    Is it possible to add a message there saying Warning! If you have a static ip address, this upgrade will destroy your network connectivity next time you reboot unless you add ExcludeAuto=no to your network profile?
    jouke wrote:Add ExcludeAuto=no to your profile. As there is no way to check a statically configured IP address for correctness, they are excluded from automatic profile selection by default starting netctl 1.10. I am sorry for the inconvenience. From netctl 1.10 onwards, the behavior of netctl-ifplugd@ is documented in the man pages. For more information on ExcludeAuto= and Priority=, consult netctl.profile(5).

  • T440 + USB 3.0 Dock = Loses network connection

    Our company is in the process of upgrading all our Windows 7 clients (x200) to Windows 8.1, but have run into a strange issue on our new Lenovo ThinkPad T440 PC's. They seem to lose network connection shortly now and then.
    This results in several issues like: 
    - Office 2013 programs crash when working witt documents on the network. (Outlook 2013 crashes if using .pst archive files on network shares.)
    - Printers are displayed as unavailable. (Need to restart Print spooler, before it realises that the connection has been reestablished)
    We are using ThinkPad 3.0 USB docks, if these might be the cuase?
    The eventviewer is pretty silent in most cases when users experience the connection loss, but can the following 3 messages tell anything?
    - The speed of processor 3 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report.
    - The user account is in a different forest than the computer account. The processing of Group Policy from another forest is not allowed. Group Policy will be processed using Loopback Replace mode. The scope of the user policy settings will be determined by the location of the computer object in Active Directory. The settings will be acquired from the User Configuration of these policies.
    - Faulting application name: EXCEL.EXE, version: 15.0.4675.1000, time stamp: 0x54629b4c
    Faulting module name: EXCEL.EXE, version: 15.0.4675.1000, time stamp: 0x54629b4c
    Exception code: 0xc0000005
    Fault offset: 0x0014677a
    Faulting process id: 0xfd4
    Faulting application start time: 0x01d033d30df9a08a
    Faulting application path: C:\Program Files (x86)\Microsoft Office\Office15\EXCEL.EXE
    Faulting module path: C:\Program Files (x86)\Microsoft Office\Office15\EXCEL.EXE
    Report Id: aa8a48d9-9fca-11e4-8269-7c7a9175854a
    Faulting package full name:
    Faulting package-relative application ID:
    You guys have any ideas what I might try?

    Working for DisplayLink, I would recommend v7.2, as it fixes a number of end user issues that were coming up on previous 7.x versions.
    The lid can be closed, but usually the laptop will be configured to go to sleep when the lid is closed. This can be changed in the Windows settings. We have an article on how to do this here.
    V7.2 includes a completely new Ethernet driver, which was designed to try and improve speed and reliability. After upgrade it might be worth removing all cables from the dock, power cycling it and replugging, just to make sure it is updated correctly.
    We know of an issue that can cause a slow upload speed with some host controllers (ironically we turned on a change to try and improve Ethernet speed, but seems to have problems when used with some PC host controllers) and I wonder if this is the issue you are seeing.
    We have a fix for this in our next 7.2 maintenance release which will be available in the next month or so.
    Wim

  • MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Fixed!

    MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Airport says no IP is detected then suddenly reconnects?
    This has been a problem I’ve been troubleshooting for the last month. I’m new to the Mac family and have loved my experience up until this point. I was under the impression that mac’s are supposed to be so user friendly that even your grandmother could use one with out having any technical knowledge. I mean I shouldn’t have to be deleting drivers or reformat my mac because of an OS update glitch? (That’s what the guy at the Genius Bar told me to do.) What I refused to succumb to was that I’m really good with computers. I get at least a phone call every other week from someone asking me for tech support. So I’d like to think that nothing I’ve done to the system would have caused this anomaly.
    After numerous attempts of troubleshooting and researching forms I believe I’ve discovered a solutions that seems to be working for me.
    Here are the steps I took to create a consistent connection to my Wi-Fi. I believe it was a combination of all these steps to create success.
    1.) Changed my router to use G Wireless Only. (I’m assuming this removed any unnecessary frequencies to allow G to broadcast stronger?)
    2.) Did a scan on the other networks in my area to find out what channel everyone else was broadcasting on. Copy and past the text below into a terminal window.
    sudo ln -s /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resourc es/airport /usr/sbin/airport
    This will allow you to simply type “airport” in the terminal window to execute the command.
    Type airport –s
    This will display all the networks in your area and what channel they are broadcasting on.
    3.) Changed my router to use a channel that no one in my area was using. (This helped to make my network stronger and free of interference.)
    The last steps will help your home network improve but these next steps I believe helped fix any install errors caused maybe by the 10.6.5 update on my mac.
    4.) Boot your Mac into safe mode by holding down the shift key while booting.
    5.) Open System Preferences and Click on Network.
    6.) Click the drop down menu from Locations at the top of the screen. Click edit locations..
    7.) Create a new location by clicking the + and give it a new name.
    8.) Delete the old location by clicking on the old locations name and click the – to remove.
    9.) Reboot
    10.) Open System Preference and click on Network.
    11.) Click on the settings sprocket next to the + and – and click on Set Service Order…
    12.) Drag Airport to the top of the list of devices then click Ok.
    Now this last step is what seemed to eliminate the issue. I hardcoded my IP address to my network. This way my computer will always use the same IP and not have to search.
    13.) Click on Advanced under Network.
    14.) Click on TCP/IP. Click on the drop down for Configure IPv4 and change it to Manually.
    15.) Fill out the fields with your IPv4 Address: 192.168.1.1xx (x=whatever number) Subnet Mask: 255.255.255.0 Router: 192.168.1.1 (All of these settings are pretty standard for most home networks.)
    16.) Click on the drop down for Configure IPv6 and change it to Off.
    17.) Next click on the DNS tab at the top.
    18.) Click the + to add a DNS Record.
    To find your DNS Server open a Terminal window by launching Applications --> Utilities --> Terminal
    Then Type cat /etc/resolv.conf
    (There is a space between cat and /. Without it you’ll get no such file or directory.)
    This should return two addresses. Your ISP’s DNS Servers.
    19.) Add both records to the DNS and click Ok.
    20.) Click Ok then under Network Click Ok.
    21.) Reboot router then Mac
    22.) Fixed my connection issue
    The symptoms I experienced eluded me to believe that something with the DHCP is going into an idle then disconnecting. Before when DHCP was set to automatically assign the network signal would time out then searchers for a new IP resulting in Airport displaying No IP is detected. By setting my IP to a fixed address I still notice a slight drop in bandwidth at moments but because of the assigned IP I never loose connection. I can now stream video, play games, chat all without getting disconnected.
    I believe this fix will work for my home network but I also noticed this issue at work so for each location that I connect for the time being I’ll create each there own location and hardcode the IP address to that network. I’ve been reading that 10.6.6 is coming soon so maybe this will be resolved for good in the next update.
    Let me know if this helps or if you have any questions.
    Best of luck.
    Message was edited by: erockdabass
    Message was edited by: erockdabass

    I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
    iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
    My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
    I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
    My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
    Did you ever find anything more to this?

  • E4200 Can't see my network shares after upgrade

    I can't see my network shares after upgrade altough everything works fine , the network scanner shows all the atatched devices but in Eplorer when I click Network there is nothing shown on two computers running Win7 64.
    I did downgraded the firmware back to .01 but still no network .
    Any help ?

    After upgrading the firmware did you reset the E4200? After successful firmware upgrade you need to reset the router. It is recommended to reset the router once. Steps to reset the router:
     Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.
    After reset, reconfigure the router and then check the connectivity status…

  • Apple TV loses WiFi Connectively After waking up from sleep

    My Apple TV, software version 3.0.2 (which gives us 1080P btw), works fine, until I put it to "sleep." Later, when I use the Apple TV, it says: "Not connected to the Internet." In effect, my wifi has disappeared from the memory of the Apple TV, and I have to enter the wifi network's password again on the Apple TV.
    I have had this Apple TV for about a year; the problem appeared maybe one month ago.
    I took it to the Apple Store after Apple Care Telephone Support consulted with engineers. The Apple engineers said it could be a hardware problem, and for me to bring my Apple TV to the Apple Store so they could diagnose it. But at the Genius bar, they put it to sleep and woke it up and it never lost connectivity every time. I suggested that as the Apple Engineers wanted the hardware looked at, why doesn't the Apple Store keep my unit, put it to sleep, and wake it the next business day? The genius bar refused, as the problem did not replicate itself at the genius bar. I told them that trying after 10 minutes wasn't enough. They should try it overnight, as I do (go to bed, try it the next day, only to discover that the Apple TV lost it's connection to the WiFi.
    So for now, my work-a-round is that after a few hours, I have to reenter the password for the wifi. I've been reading threads about similar issues with the iPad, but I don't know if the problems are related (technology wise).
    Bottom line: My Apple TV loses its connectivity after being in sleep mode for awhile. Nothing to do with the iTunes store or 3.0.2 as far as I can determine; if I don't put it to sleep I don't lose connectivity.

    Thank you, Jamie Cox1. However, after rebooting the Apple TV, I lose my 1080P; it goes to 720P and takes about 5 minutes or so to reboot. Then I have to set the 1080P again. The good news is that the wifi returns But it is quicker merely to re-enter my password.
    The problem remains: After a while of having the Apple TV in sleep mode, I lose connectivity to my wifi And while I have a complicated password (upper and lower case letters, numbers, and not a dictionary word), it still is quicker to re-enter my password than to wait for the Apple TV to reboot and re-enter the settings for 1080P.
    Thanks anyway; if I only had 720P perhaps this solution might be enough - but I have 1080P.
    I am working with Apple Care; I have reconfigured my wifi twice with Airport Utility, removed all interference (microwaves, cordless phones), and still the problem remains. Apple Care hasn't solved the problem. The Genius Bar at the Apple Store hasn't solved the problem. Re-booting does find the wifi again, but it takes a long time, and then I still have to re-set the resolution to 1080P. So I just re-enter my password each time.
    And that's my update! I appreciate everyone's suggestions. However, the problem remains: after putting the Apple TV in sleep mode, and then later when I want to use the Apple TV, the Apple TV forgets that it is connected to wifi and I have to re-enter my password, or I can take some time and reboot the Apple TV but then while the wifi returns, the 1080P disappears.
    Thank you everyone for all your suggestions
    But the problem remains

  • I PHONE 4S WIFI NOT CONNECTING AFTER UPGRADING TO iOS7.1.1

    i PHONE 4S WIFI NOT CONNECTING AFTER UPGRADING TO iOS7.1.1

    Sorry to hear that.
    Do you have a technical support question?  If so, please don't hesitate to ask.  Also, please let us know the troubleshooting steps you've taken so far.

  • HT5192 I have iPhone 4Gs Although I am in a good coverage  area I lose network connection and  re-establish  connection again

    I have iPhone 4Gs
    Although I am in a good coverage  area
    I lose network connection and  re-establish  connection again

    Please post in the iPhone forume. This is the iPod touch forum.

  • I have iPhone 4Gs Although I am in a good coverage  area I lose network connection and  re-establish  connection again

    I have iPhone 4Gs
    Although I am in a good coverage  area I lose network connection and  re-establish  connection again

    Please post in the iPhone forume. This is the iPod touch forum.

Maybe you are looking for