CSCus07365 - should I not use DNS local database at all or I can enable it again after disabling?

I had an issue with my RV320 that it suddenly stops answering DNS queries from my LAN. I just found out that a new firmware was released last month (v1.1.1.19), and one of its "known issues" is bug id CSCus07365 according to the release notes:
Sometimes the DNS process is gone and can not reply the DNS request from LAN network.
Solution: Check if you have enabled DNS local database feature on RV320/325, disable it, and then configure and save the WAN setting page again.
From that description I am not sure if this is a one-time issue after upgrading (so that I should disable and re-enable it), or if this is still a current issue and it will be better to keep away from DNS local database at all until a new firmware is released.
Thanks in advance!

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Similar Messages

RV082 DNS Local Database doesn't work

I recently upgraded the firmware to 2.0.2.01-tm (from 2.0.0.19-tm). Now I noticed the RV082's local DNS server ("DNS Local Database" feature) does not work any more. Any URL-IPaddr combo I used to put in there was resolved prior to sending a request to the WAN's primary/secondary DNS server.
It isn't a PC problem. I tested on different real and virtual machines, windows and Linux. Is there new "enable" switch somwhere? Anyone, any ideas? Suppose I log into the RV082 with puTTY, what can or should I do?

You can try a factory reset and reload the configuration but the above step i suggested if it didn't work then next suggestion would to be factory reset and reconfigure manually and then test.
So yes you can try that first then try what i suggested and if that don't work then it will be next step
Factory reset and reconfigure manually.. Some times when upgrading it can cause some corrupted files and only way to fix is a factory reset and reconfigure (manually)..
Jasbryan

RV320 "DNS Local Database" no function

I did setup a brand new RV320 today. Firmware is v1.1.0.09.
I am facing the following problem...
I filled the "DNS local database" with names and IPs and expected that
clients connected via DHCP will be able to use that names in the LAN
instead of IPs. DNS server mode is set to "Use DNS Proxy".
However, clients don't get the names resolved as expected.
Any idea, what does go wrong?

I found the same issue after setting up a local hostname in the DNS table in my RV320 (firmware v1.1.0.06) about a week ago but I don't think the explanation in your "reply" is correct. What I noticed at first is that I couldn't ping the host by name from my Windows PC, but it worked fine from my Android tablet or Linux PC. Experimenting a bit more yesterday, I ran Wireshark while pinging from my Windows PC and discovered that if I used a host name, but not a domain, the PC sent a couple of LLMNR packets (destination IP 224.0.0.252), to which it got no reply, then gave up. If I pinged an external site from Windows, e.g. www.google.co.uk, it issued a single DNS query, destination 192.168.0.1, got a response either from the RV320's proxy cache or the ISP's DNS, and carried on with echoes. If I add a domain extension to the local hostname in the name table, e.g my router's default domain, router44fda0.com, and ping hostname.router44fda0.com, the PC also issues a DNS query, and gets an instant (well, 0.864 millisecs) response from the RV320. I set up my target host with Bonjour (the avahi daemon), and pinging hostname.local from my Windows PC, found that it began with a double multicast DNS (mDNS) query (destination IP 224.0.0.251) asking for the same nodename on IPv4 (type A query) and on IPv6 (type AAAA query), to which my target Linux system responded with hostname.local and the IPv4address, but not the IPv6 address. To my surprise,125 millisecs after the PC received the IPv4 address, it issued a DNS query to the router, which responded "no such name" (the hostname was still set up with the router's default domain extension). Even stranger, the PC then issued two LLMNR queries with just the hostname, not the .local extension, to which it got no replies, and finally a second mDNS query, this time a single IPv6 (type AAAA) request for hostname.local, to which it also got no replies. So only the first mDNS query got a successful response. I presume that if had got a successful response from any of the other queries, they would have superceded the first response, i.e. it is saying if the DNS disagrees with the multicast DNS, the DNS is right, if LLMNR disagrees with mDNS and DNS, then LLMNR is right, and if it gets an IPv6 response to the mDNS query, that trumps everything!
My point is that the RV320 does respond to a DNS request, even if it only has a host name in its table. The problem encountered above is that Windows does not issue a DNS request if you ask it to open a host name with no domain.
BTW, I understand that the only reason my PC issues an mDNS query is that Apple install an mDNS extension when iTunes is installed. The mDNS query is only issued if the domain is .local

DBCA can not use ASM for database storage due to following reason: Could no

Hi
I've a recently installed RAC11gR2(11.2.0.3) on HP-UX
I installed Grid Infrastructure with grid user:
Node1: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
Node2: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
I installed the Oracle Server with oracle user:
Node1: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
Node2: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
All related Grid Infrastructure is functioning well in both nodes:
$ crs_stat -t
Name Type Target State Host
ora.DATA.dg ora....up.type ONLINE ONLINE node03
ora.FRA.dg ora....up.type ONLINE ONLINE node03
ora....ER.lsnr ora....er.type ONLINE ONLINE node03
ora....N1.lsnr ora....er.type ONLINE ONLINE node04
ora.asm ora.asm.type ONLINE ONLINE node03
ora.cvu ora.cvu.type ONLINE ONLINE node04
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora....network ora....rk.type ONLINE ONLINE node03
ora.oc4j ora.oc4j.type OFFLINE OFFLINE
ora.ons ora.ons.type ONLINE ONLINE node03
ora.scan1.vip ora....ip.type ONLINE ONLINE node04
ora....SM1.asm application ONLINE ONLINE node03
ora....03.lsnr application ONLINE ONLINE node03
ora....d03.gsd application OFFLINE OFFLINE
ora....d03.ons application ONLINE ONLINE node03
ora....d03.vip ora....t1.type ONLINE ONLINE node03
ora....SM2.asm application ONLINE ONLINE node04
ora....04.lsnr application ONLINE ONLINE node04
ora....d04.gsd application OFFLINE OFFLINE
ora....d04.ons application ONLINE ONLINE node04
ora....d04.vip ora....t1.type ONLINE ONLINE node04
$
The ASM instance are running well in both nodes
Connected with oracle user, the listener has registered perfectly the ASM instance in each node:
$
$ lsnrctl status
LSNRCTL for HPUX: Version 11.2.0.3.0 - Production on 16-MAY-2012 15:41:06
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for HPUX: Version 11.2.0.3.0 - Production
Start Date 16-MAY-2012 15:24:19
Uptime 0 days 0 hr. 16 min. 47 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/grid/diag/tnslsnr/node03/listener/alert/log .xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.133)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.136)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
The command completed successfully
$
$
DATA & FRA disk group are created:
$
$ echo $ORACLE_SID
+ASM1
$
$ asmcmd
ASMCMD>
ASMCMD> ls -lt
State Type Rebal Name
MOUNTED EXTERN N DATA/
MOUNTED EXTERN N FRA/
ASMCMD>
ASMCMD>
The big issue is... that the DBCA can not see the diskgroups. When I choose ASM Storage it can not see them. It shows the chart in blank and if i try to write the disk group, so the following message appears: can not use ASM for database storage due to following reason: Could not connect to ASM due to following error: ORA-01034 ORACLE not available
What can be passing in this case... ?
Thanks in advance

Thanks both
Really the problem initially was because of this:
[INS-06006] Passwordless SSH connectivity not set up between the following node(s): [node1, node2]. CVU may reports "PRVF-4007 : User equivalence check failed for user "user"" for same error
and I had to install node1 first and after node2 manually and perhaps for this the product was not well linked.
I resolved the problem establishing the keys with the wizard and after copying the following files from node1 to node2
/home/grid/.ssh -------> /home/grid/.ssh
authorized_keys
known_hosts
This is the procedure if you run the wizard at the node1.
The problem is that the wizard creates the keys incompletely...
Thanks

Building an application that does not use any local program files or libraries

I need to build an application that will not use any local libraries or LabView program files(even if LabView is installed on the PC). I also am curious if anyone knows if there is a way to debug such an application(in it's compiled state).
Any help on these topics would be greatly appreciated.
-Nate
Solved!
Go to Solution.

Hello,
I am unclear on what you are trying to accomplish here. As the previous poster mentioned, if you enable debugging when building your application, you can remotely connect and probe the block diagram of the running executable. Executables use the run-time engine but could also access drivers or other run-times if using a specialized toolkit/module. This all depends on your application.
-Zach
Certified LabVIEW Developer

LRT214 DNS Local Database Configuration

I've been able to get my DNS Local Database to allow computers to access via name.lan (i.e., router.lan, printer.lan), but if I leave it just as router or printer, it won't connect.
Is this a known bug, or is there a trick to configuring it?

The LRT DNS Local Database requires the Host Name to include the router Domain Name.
Ex: mydevice.router00abfc.com
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please iPhone 4, iOS 7.0.3

I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please
iPhone 4, iOS 7.0.3

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

Hi, i just reset my iphone, but i forgot that i do not use icloud, and i lost all my pictures now. Is there anyway to restore all the pictures. please help me

hi, today i just reset my phone, and i forgot that i do not use icloud, so i lost all mu pictures. Is there anyway to restore the pictures. Please help me ><" thanks a lot

Omg:( kill me then. I store my photos in my laptop. But i reset my aunt's phone, and she doesnt have anything: no apple id, no icloud. Normally when i reset mine, my phone back up everything.
Anyway. Thanks a lot

I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same displa

I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?

More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed

HT4972 i have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not detect to my computer? what can i do? please help me..

have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not be detect to my computer? what can i do? please help me..

You can not install iOS 5. It is no longer signed by Apple. You can only install the current version of iOS. For a 3GS, that's 6.1.3.
However... if you have 4.2.1 on your phone, odds are it is not a 3GS, it is a 3G. If that's the case, you've reached the end of the road for that. It can not run anything higher than 4.2.1.

DNS / DNS Local Database problem

Dear Forum,
I have a
RV082 10/100 8-Port VPN Router V03 Firmware v4.1.1.01-sp (Dec 6 2011 20:03:18).
When I set the DNS Servers of DHCP to google (8.8.8.8) everything works like a charm.
In order to use the DNS LOCAL I set the DNS Server to the RV082 address.
I then can resolve the local adresses but not normal internet adresses like www.cisco.com.
They time out. I still can ping everything when I know the IP. But it seems the router does not forward the request.
The WAN Interface has as well the Google DNS Server 8.8.8.8 configure.d
Any hints ?
best regards
Dirk

Dear Forum,
I have a
RV082 10/100 8-Port VPN Router V03 Firmware v4.1.1.01-sp (Dec 6 2011 20:03:18).
When I set the DNS Servers of DHCP to google (8.8.8.8) everything works like a charm.
In order to use the DNS LOCAL I set the DNS Server to the RV082 address.
I then can resolve the local adresses but not normal internet adresses like www.cisco.com.
They time out. I still can ping everything when I know the IP. But it seems the router does not forward the request.
The WAN Interface has as well the Google DNS Server 8.8.8.8 configure.d
Any hints ?
best regards
Dirk

Why we choose to use the local database for wp8?

I have some apps, all face the same problem, much data is saved in the runtime memory, it really bad for saving device resources. So I just would like to know if I transfer the data into the local database, is that helpful to save some more memory space,
after all the database is built in local file and access through the isolation storage. Could anyone tell me about how to save the memory space, I am now very tired to resolve those bugs caused by out of memory...
Help me please.

Hi Situdana,
Here are some scenarios.
For instance if you have a 10MB image stored in your local database, and you would like to display. Without load the whole image to the runtime memory you cannot display the image to your user, that means in this situation, runtime memory equals more or
less 10MB.
Another example could be you need to find some data in a 10MB data file, if the file is structured, using SQLite can help you reduce the time to search and use less runtime memory.
I don't know what kind of data you saving on the runtime memory, but looks like you can manually manage the memory for instance release some IDispose() driven class when you think they are un-necessary. We can only provide a really general suggestion to
you, for more information you can ref:
Developing apps for lower-memory phones for Windows Phone 8
--James
<THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
Thanks
MSDN Community Support
Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

I am having a data excess usage issue with my Jetpack although I did not use the VZW network at all.

Background: My home does not have access to landline internet and I am relying on a Verizon Jetpack device rather than satellite cable for internet access. Within my JetPack wireless network I have several devices connected, iPADs, PC’s, printer, etc. (up to 5 devices can be connected with my system). Recently, I had one device within my immediate wireless network that I needed to transfer data via FTP to another local device within my immediate network. The receiving device FTP’d data from device (198.168.1.42) to local IP (address 192.168.1.2). To understand the data path a Trace rout for this transfer is 198.168.1.42 (source) to 198.168.1.1 (Jetpack) to 192.168.1.2 (receiver). Note that the VZW network ((cloud)/4G network) was NOT used in this transfer nor was any VZW bandwidth used for this transfer (of course less the typical overhead status/maintenance communications that happen regardless). Use of the VZW bandwidth would be something like downloading a movie from Netflix, (transferring data from a remote site, through the VZW network, into the Jetpack and to the target device). I also understand if ones devices have auto SW updates that would also go against the usage as well. I get that. My understanding of my usage billing is based data transfer across the VZW network.
Now to the problem: To my surprise I was quite substantially charged for the “internal” direct transfer of this data although I didn’t use the VZW network at all. This does not seem to be right, and doesn’t make much sense to me. Usage is should be based on the VZW network not a local Wi-Fi. In this case, Verizon actually gets free money from me without any use of or impact to the VZW network. Basically this is a VERY expensive rental for the jetpack device, which I bought anyway. Considering this, I am also charged each time I print locally. Dive into this further, I am also interested in knowing what is the overhead (non-data) communications between the jetpack router and devices and how much does that add up to over time?
Once I realized I was getting socked in bandwidth, as a temp solution I found an old Wi-Fi router, created a separate Wi-Fi network off the Jetpack, but the billing damage was already done. Switching each device back and forth to FTP and print is a hassle and there should be no reason the existing hardware couldn’t handle this and charges aligned with VSW usage. Is purposely intended by Verizon? Is this charging correct? And can I get some help with this?
Logically, usage should be based on VZW network usage not internal transfers. All transfers between IP addresses 192.168 are by default internal. Any data that needs to leave the internal network are translated in to the dynamic IP addresses established by the VZW network. That should be very easily detected for usage. In the very least, this fact needs to be clearly identified and clarified to users of the Jetpack. How would one use a local network and not get socked with usage charges? Can one set up a Wi-Fi network with another router, hardwire directly from the router to the Jetpack so that only data to and from the VZW network is billed? I might be able to figure out how to have the jetpack powered on but disable the VZW connection, but I don’t want to experiment and find out that the internal transfers are being logged and the log sent after the fact anyway once I connect…. A reasonable solution should be that users be able to use the router functions of the Jetpack (since one has to buy the device anyway) and only be billed for VZW usage.
Your help in this would be greatly appreciated. Thanks

i had one mac and spilt water on it, the motherboard fried so i had to buy a used one...being in school and all. it is a MC375lla
Model Name:
MacBook Pro
Model Identifier:
MacBookPro7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.66 GHz
Number of Processors:
1
Total Number of Cores:
2
L2 Cache:
3 MB
Memory:
8 GB
Bus Speed:
1.07 GHz
Boot ROM Version:
MBP71.0039.B0E
SMC Version (system):
1.62f7
Hardware UUID:
A802DE22-1E57-5509-93C5-27CEF01377B7
Sudden Motion Sensor:
State:
Enabled
i do not have a backup of it, so i am thinking about replacing my old hard drive from the water damaged into this one, not even sure if that would work, but it did not seem to be damaged, as i recovered all the files i wanted off of it to put onto this mbp
the previous owner didnt have it set to boot, they had all their settings left on it and tried to edit all the names on it, had a bunch of server info and printers etc crap on it. i do not believe he edited the terminal system though--he doesnt seem to terribly bright(if thats possible)
tbh i hate lion compared to the old one i had, this one has so many more issues-overheating,fan noise, cd dvd noise
if you need screenshots or data of anything else as away
[problem is i do not want to start from scratch if there is a chance of fixing it, this one did not come with disks or anything like my first. so i dont even know if i could, and how it sets now i am basically starting from scratch, because now all my apps are reset but working, i am hoping to get my data back somehow though, i lost all of my bookmarks and editing all my apps and setting again would be a pain

I use yahoo mail, I do not use the mail server on my computer, how can I save a link to then send it as an attachment on my yahoo e-mail

u

I will address your second question.
First, make sure your iPhone and iPad have absolutely identical Apple IDs. If they do, use that Apple ID in Settings > iCloud on your iPhone to select the "Notes" option. Lo and behold, all your iCloud notes should appear on your iPhone.

I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to iCloud, following your instructions and now I can not use my mobileme e-mail address. How can I contact directly with Apple, not just an automatic reply phone number

I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to icloud following all your instructions and now I can not use my mobile me e-mail address. I can not activate icloud because when I put my e-mail address it answers that somebody is already using my address. I have my old e-mails, but I can not receive any e-mail or send them.
I have contacted Apple Technical Support in Spain and I was sent an e-mail saying that I have to call a phone number and when I call it is always an answering machine who answers that says that I have to pay 50€ for a consultation or wait for 10 minutes. When I have made the consultation it was never mentioned that I have to pay 50€ for a phone consultation. If I don't want to wait I have to pay for the Apple Tecnical Support which cost 250 €, this was not mentioned in the technical support page.
Can somebody let me know how can I contact Apple in another way in order to talk with a human being or chat directly? I was very happy just using my mobileme e-mails, I didn't need any clouds and I was force by Apple to registered if I want to continue using my mobileme e-mail address.

Sandra,
See this Apple support document for information on reporting an issue with your iTunes purchase.
http://support.apple.com/kb/HT1933
B-rock

CSCus07365 - should I not use DNS local database at all or I can enable it again after disabling?

Similar Messages

Maybe you are looking for