CSF Phone configuration Find button
We have two clusters.
1 here in the US and 1 in Germany.
The one in Germany has a "Find" button next to the "Owner User ID" and one next to the "Primary Phone" entries.
Anyone know how to enable this on our CUCM here in the US?
I opened a TAC case and they say they dont have it either. LOL
Thanks in advance for any help.
Maybe in the Enterprise Parameters?
It will only let me go down to 250 on the Max lookup Items..
I have 150 Users on this system. My other system has 1600+.
grrr... so close! It is such a pain adding the primary phone this way...
Similar Messages
-
No " Find " Button in CUCM End User Configuration
Hello Community, we have two different 8.6.2 CUCM with the same Version.
I visit the two CUCM w/ the same PC and Browser. I go to End User Configuration and Edit one of the Users. I do this on both of this CUCM. At one of the CUCM I see the "Find Buttons" to search for example " Controlled Devices " and at the second CUCM no Find Button there. It is at more Configuration points in End User Configuration and not depend from the End User. The CUCM Version is exactly the same!
Andy Idea appreciate!
Really Thanks Armin
HTH, please rate all useful posts!Hi Jaime, Really thanks for your support and effort. It should be right!
Please see the count of entrys :-)
w/ the find button we have near 36.000 device profiles entrys
w/o find button we have 38 device profile entrys.
I can´t find anything in srnd etc.... regarding the limit.
For doublecheck I would increase the count of Deviceprofiles.
From which limit the "find button appears"?
HTH, please rate all useful posts! -
Name Dialing and Find button in Device Profile
I have two questions.
1. How do I enable "Name Dialing" option in CUCM 8.6, I dont have that option in End user Configuration.
2. How do I have "FIND" button next to Phone Button Templet in Device Profile configuration window.
ThanksName dialing not even sure where you got that screenshot, I also don't have it
Find is only available when you have so many phone button templates and they cannot be shown in the dropdown.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk -
Will not locate home wifi but if I turn on my mobile hotspot on my phone it finds it
Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect to the home network?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Phone 4 home button does not work, iPhone 4 home button does not work
Phone 4 home button does not work. I tried to put it off and on, but to no avail. Tried updating, still nothing.
No magic solutions for a hardware problem. You'll need to bring your phone to Apple for replacement ($149), or find a 3rd party to fix your phone (which will forfeit all future support on that phone, warranty or otherwise, from Apple)
-
Find button on toolbar won't search current page
Post Author: sarasew13
CA Forum: .NET
I'm having an issue with the Find button on the standard report viewer toolbar for ASP. When I enter a search term and click on find, it starts searching on the next page even though there are entries (several) that match on the current page.
I found one mention on the internet that says it only searches forward (if you search from page 5 you won't get the entry on page 2) which is fine. However, this keeps the user from searching from page 1 (for example) when they are on page 1. If this is forward only (and that was only mentioned on a site not related to Microsoft or Crystal) then shouldn't it still look on the current page?
Anyone else have this issue?
SaraPost Author: Ted
CA Forum: .NET
Yes. I'm using Crystal Reports for VS 2005 (ASP.NET). I don't see much written about this issue, but it sure annoys me, and my users won't like it either. Unless there is a better alternative, I'll remove the Find feature from the reports completely so that I don't have to deal with user complaints. They can use the browser Find to search a page at a time, or export the report and search using the exported format's application. -
How to enable the 'FIND' Button in Module Pool Screen. Logic please
Hi All,
I am writing one Module Pool Program. I have one requirement like I have to put FIND, FIND+ buttons on different screens.
I am able to do the code for normal FIND. According to my requirement I have to display one Popup when the user click on FIND button. Once he entered some value it should find all the records and all the fields and display the list of hits in another popup. This whole process should as same as in SE11 Transaction functionality.
Example: SE11 ->Table Entries -> and click the FIND Button. I need the same functionality in my Program.
Please let me know ASAP. If you provide some code sample it will be Great.
Thanks & Regards
KiranHi
If you have just implemented the code for FIND I believe u need to add some little modifications for FIND+.
U need only to manage the position of the last found value, so u need to go on from that position for FIND+.
The position should have the two coordinates X (the position in the record) and Y (the number of the record):
- FOUND should start for postion = 0, 0
- FOUND+ should start for position = X, Y
Max -
UIX Master-Detail - Find button does not display detail lines
Hello,
We have a master-detail UIX page. Master has one attribute only. When 'Next' or 'Previous' buttons are pressed, the next master-detail records are displayed.
However, when master attribute's value is changed by the user and the 'Find' button is pressed, the new detail lines are not displayed. Also we get following error:
JBO-26080: Error while selecting entity for <ViewObject>
Has anyone experienced this issue before?
Thanks, Ali.Please dis-regard this post. The correct sequence is to click on Find button, enter new value then click on Execute button to query new values.
Thanks, Ali. -
If i press the Find button didn't get the all fields
Hi...........
If i press the find button only two fields get the values remaining fields didn't get the values
:CONTROL_1.ASSET_NUMBER := i.asset_serial_numebr;
:CONTROL_1.INSTANCE_NUMBER := i.serial_number; ---------------only this two fields are inserted.
actually in loop first i taken those two fields then i taken begin i wrote select statement it's not working i think tats why only two fields are get the values.
i wrote this code in find button
declare
cursor c1 is
select aa.serial_number asset_serial_numebr,
aa.instance_number serial_number
from mtl_eam_asset_numbers_v aa,
mtl_eam_asset_attr_values av
where aa.serial_number = av.serial_number
and aa.MAINTENANCE_OBJECT_ID= av.MAINTENANCE_OBJECT_ID
and av.attribute_category = 'Expected Life Details'
and av.c_attribute3 not in ('Stolen','Under Disposal')
and aa.inv_organization_id = :global.ORG_ID
and aa.inventory_item_id = :CONTROL.INV_ITEM_ID
order by aa.serial_number;
cur1 c1%rowtype;
begin
open c1;
fetch c1 into cur1;
if(c1%NOTFOUND) then
go_block('CONTROL_1');
clear_block;
fnd_message.set_string('Asset not available for selected group');
fnd_message.show();
raise form_trigger_failure;
end if;
close c1;
:parameter.RECORD_COUNT := 0;
go_block('CONTROL_1');
clear_block;
first_record;
for i in c1
loop
:CONTROL_1.ASSET_NUMBER := i.asset_serial_numebr;
:CONTROL_1.INSTANCE_NUMBER := i.serial_number;
begin
select
depr_method,
commision_date,
asset_cost,
asset_life,
salvage_life,
period,
months,
pre_depr_cost,
pre_cost_after_depr,
remarks
into
:CONTROL_1.DEPR_METHOD,
:CONTROL_1.COMMISION_DATE,
:CONTROL_1.ASSET_COST,
:CONTROL_1.ASSET_LIFE,
:CONTROL_1.SALVAGE_LIFE,
:CONTROL_1.PERIOD,
:CONTROL_1.MONTHS,
:CONTROL_1.PRE_DEPR_COST,
:CONTROL_1.PRE_COST_AFTER_DEPR,
:CONTROL_1.REMARKS
from xxeam_depreciation_master
where org_id = :global.ORG_ID
and inventory_item_id = :CONTROL.INV_ITEM_ID
and instance_number = :CONTROL_1.ASSET_NUMBER;
exception
when no_data_found then
null;
end;
:parameter.RECORD_COUNT := :parameter.RECORD_COUNT + 1;
next_record;
end loop;
first_record;
end;
Please give me any solution................
Regards
MohanMohan,
We cannot read your mind, so you need to describe what you are trying to do in greater detail.
And always post your indented code in code tags like this, {code}..your code here..{code}
begin
open c1;
fetch c1 into cur1;
if(c1%NOTFOUND) then
go_block('CONTROL_1');
clear_block;The Fetch is not in a loop, so only the first row will be read.
And then suddenly we see
for i in c1
loop
next_record;
end loop;And what FOR i doing in this place? Where is the fetch for the second record onwards?
Too many errors in the code.
Regards, -
I accidentally erased my phone from Find my Iphone App and I have a sim lock on my phone - now it wont let me restore. any ideas?
When I try to connect to itunes, It states ''The sim card of this phone is PIN locked - please enter the PIN code of your SIM card and connect again to iTunes" however I don't have the option to enter the Pin code on my phone as on my phone screen it states "your iphone could not be activated because the activation server is temporaily unavailable"
PLEASE HELP AND THANK YOUWith a sim lock,
you'll have to contact your carrier for the PUK code, as described here:
http://support.apple.com/kb/HT1316 -
I would like to help me. My iPhone was lost and stolen and I didn't have configured Find My iPhone. So I could n't find it. Please help me to find it or delete my information and photos. This is my serial No: DN*****TWD.
<Personal Information Edited by Host>If you didn't set up Find My iPhone, there's nothing we can do to help you. Sorry.
-
Hi Everyone,
I have a screen displaying 3 alv grids, and I have created through menu painter standard toolbar. In that toolbar I have find and find next buttons.
My requirement is if I press find button it has to search in the grid on which focus is present for the specified string like the find functionality present in the alv grid toolbar.
How can I implement this.
Any help on this, sample codes will be greatly appreciated.
Thanks a lot,
Prashanth.check this program to find how you can manage the grid toolbar button click event from outside.
BCALV_TEST_GRID_TOOLBAR
Regards
Raja -
How do you add a phone to "find my iphone"
how do you add a phone to "find my iphone"? My ipad does not seem to know aobut my iphone4.
Do you have it set up in your iPhone 4? Settings > Mail, Contacts & Calendars > Add account > Mobile Me
Use your existing Apple ID and password -
Show result before I click "Find" button~
HI ALL~
I have a problem~
ex: A-Group has "Find Page=true"......
when I navigate FindA-Group.jsp , there has result in the page before I press "FIND" button.(I combine fine page and result page to same page).Of course,I can input some data in query columns,and to find.
Could it to accomplish??
How to do it??
my JheadStart vision:9.0.5.1.8
Using JSP.Spray,
I don't exactly understand your problem. I assume that you have applied the section from the JHeadstart tutorial called "Find page and result table in same page".
I assume that the current behavior is that initially (when you first enter the page) you do not see the result table, and that you would like to change that so that it initially shows all rows?
If that is the case, you could try re-ordering the Struts actions that are performed: first perform a find before you go to the page.
Hope this helps,
Sandra Muller
JHeadstart Team -
I have a wireless router for my house, and my I-phone can find the network and sign in but it won't show up in airport for my i -mac even when right beside the router. What can I do?
Do you have any videos/movies in the video app?
In iTunes if you right click on the video and select Get Info and go to the Option tap what Media Type is shown?
Maybe you are looking for
-
HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper.
HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g can not define a custom size paper. I would like to have a custom size to work with a card making program.
-
OAS 4.0.8.1 Administration from a remote location
We have installed OAS 4.0.8.1 on NT and it is functioning. I am able to access this from a remote place and get a static web page. I don't have a registered domain name Can I go into Node manager (OAS Manager) from a remote location (through Internet
-
I want to import a MS Word Index into a .pdf file using Adobe Pro. How do I do that?
I want to import a MS Word Index into a .pdf file using Adobe Pro. It is for a book. The book has been converted to a .pdf for printing, but it needs an Index for the last page of the book. I tried to embed a new index (starting from scratch but no
-
Dear Experts, Is there a way we can upload opening balances for BP, GL and Inventory. Where can we find the setup program for Data Transfer Workbench
-
Using Dreamweaver for the first time. I tried to use it to open an RTF document and it showed all the Markup and formatting elements. Is it possible to open an RTF document in Dreamweaver so the document markup is not displayed? How?