CSM 4.0 SP1 - Restore Factory Defaults

Hello all. We need to restore factory defaults on a CSM 4.0 SP1  server, and need to do it without re-installing the server. Can't find  an option to do this, so that CSM can start from scratch with no devices  or policies, and with all default settings. Is there a way to do this? I  believe just deleting devices and policies will not cut it, we need to  make sure that the database is clean and factory default.
Thanks in advance

Hi,
mm, I could not find the proper documentation (i see it for LMS...) anyway, you can try the following:
1- stop the server
net stop crmdmgtd
2- Erase the DBs
set NMSROOT=c:\progra~2\cscopx
%NMSROOT%\bin\perl %NMSROOT%\bin\dbRestoreOrig.pl dsn=cmf dmprefix=Cmf npwd=admin
%NMSROOT%\bin\perl %NMSROOT%\bin\dbRestoreOrig.pl dsn=vms dmprefix=vms npwd=admin
If using Performance Monitoring (MCP):
%NMSROOT%\bin\perl %NMSROOT%\bin\dbRestoreOrig.pl dsn=mcp dmprefix=mcp npwd=admin
NOTE:
NMROOT is the root where CSM is installed. I am assuming you are using default settings for Win2008 but you need to change if you installed somewhere else
3- restart the server.
net start crmdmgtd
Please note that all you data will be lost. Also, make sure to have the license handy as it might be required to install the license again.
Also I would suggest you do a backup of your DB before you perform these steps
Stefano

Similar Messages

  • Unable To Restore Factory Defaults.

    Hi...
    I am not being able to reset Flash Professional CS5 to factory defaults, I have tried the Ctrl+Shift+AltKey Combination before starting the app but it does not do anything.Although on Photoshop CS5 there is no problem in doing so. By the way I have checked the Knowledge Bank & this Key Combination is mentioned for this Software. Please Help,Thanks in Advance.

    Hi Joe,
    For Flash CS5, you can restore your settings by deleting your user configuration folder and recreating the preferences files.
    User configuration file:
    Window XP - C:\Documents and Settings\<username>\Local Settings\Application Data\Adobe\Flash CS5
    Window Vista & Window 7- C:\Users\<username>\AppData\Local\Adobe\Flash CS5
    Recreate preferences:
    http://kb2.adobe.com/cps/520/cpsid_52048.html
    Thanks,
    Quynh
    Flash Authoring, QA

  • Restoring Factory Defaults: second hand computer?

    So I have finally talked my wife into going "Mac". I picked up the new model iMac G5 for her second hand. It was practically unused by the previous owner and doesn't contain anything additional (software or hardware) other than what came stock.
    Two things though:
    - We would like to re-create the "PROFILE" under her name and info as well as delete the previous owners.
    - I would also like to simply restore to factory defaults so any custom preferences or files left behind are deleted.
    What's the safest & simplest way to do this? Would it require running or booting from the OS disk?
    Is there a step by step guide created out there?
    Thanks so much!
    Chris

    OK,
    New question:
    Upon trying to create a new profile I have use the previous owners admin. password (duh). That dawned on me on the way home after buying it yesterday.
    Turns out, it was my dead end.
    Isn't there a way to override that, I remember apple tech support helped me do that on my powerBook one time way back.
    The reason I ask here first is . . . maybe the password is a universal password the seller uses for everything and he'd be reluctant to dish it out to me? Otherwise I could just call him back for it.
    Goes back to what you're saying W.J., he should'a wiped out his profile, created a generic one with generic password?!?!?

  • Restoring factory defaults (SRW2024)

    How do I restore the factory defaults on a SRW2024?  I tried using the hyperterminal method described in the troubleshooting section, but I can't get a "login screen" to appear.  I've tried using both a null modem and regular rs232 cable.

    After change IP address of the switch the access web is not working!! I have access via telnet and console, but I tried to reset to default setting using the procedure , but the screen do not accept the yes command at the menu! Somebody can help me? Please linksys people? Thanks in advance

  • CUE 8.5.1 no initialization wizard after restore factory default

    I am also able to get to the CME GUI as well.
    From the help menu of CUE 8.5.1:
    When logging in to the system for the first time, use the Initialization Wizard to configure your system. The Initialization Wizard is a software tool that has a series of windows that help you configure Cisco Unity Express. The wizard starts automatically the first time you log in to the graphical user interface (GUI).
    I do not get this option.

    Fixed.  Routing issue:
    Routing issue:
    ip http access-class 23  !!!!!! Preconfigured from Factory
    ip http authentication local
    no ip http secure-server
    ip http timeout-policy idle 60 life 86400 requests 10000
    ip http path flash:/gui
    access-list 23 permit 10.10.10.0 0.0.0.7  !!!!!! Preconfigured from Factory
    To fix
    No ip http access-class 23

  • How long does it Take an iPod to restore factory defaults?

    This is a pain. Its in disk mode and it's been restoring since 7 o'clock p.m last night. its now 7:15 and its still restoring. how much longer could this take?

    I restored my 160GB 2 days ago, restoring (including 75GB of music) lasted about 4 hours, already way too long IMHO. (Vista DualCore, 2GB-RAM)

  • Restoring Factory Defaults

    Hi,
    I want to give my old I-phone 5 to my son and am trying to delete all of the phone's contents. A box keeps popping up asking for my apple ID to an old email address. I recently changed email addresses and changed my apple ID. I can't get my old password from the old Apple ID.
    Can anyone help?

    Recover your old password here:
    https://iforgot.apple.com/password/verify/appleid?language=AU-EN&app_id=93&s=627 -622
    Then change your ID back to your old ID, erase your phone, then change your ID back to the one you want to use.
    If unable to do that, you'll have to call AppleCare & ask to talk to "Account Security".

  • ASA SSM-10 Need to restore factory defaults

    I had a consultant come in and install the IPS on my firewall, well he forget the login password for the SSM-10 IPS and now I can't get into it. I have tried all the hw module 1 restart, reload, config options and have removed the card and looked for a hard reset button but nothing has worked. How do I get into the IPS so I can reset the password?
    Rich Weber

    Hi,
    The only way is to do a recovery, complete instructions are at:
    http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a008045a95f.html
    In a nutshell:
    1) cable the ssm module to a tftp server (can be via a switch or whatever)
    2) issue the hw-module command to do a configure (enter params as prompted)
    3) issue the hw-module command to reboot
    Note that your tftp server needs to be able to handle files >16MB
    HTH - plz rate if it does
    Andrew.

  • How do you factory default the MSE 3350 Mobility Solution Engine

    Hi Guys
    I was wondering if anyone knows how to factory default the MSE or know of a way to enable the setup wizard again.
    Is there a way to check the status or change the WCS communication password manually.
    Thanks in advanced

    You can use following steps to restore factory default fo MSE:
    Step 1 In Cisco WCS, click Mobility > Mobility Service Engines.
    Step 2 Click the name of the mobility services engine you want to configure.
    Step 3 Click System (left panel).
    Step 4 Click Advanced Parameters.
    Step 5 In the Advanced Commands section (right), click Clear Configuration.
    Step 6Click OK to clear the mobility services engine configurations.

  • Reset printer to factory default

    I have a HP Officejet 7310 that I need to reset to factory default.  Can you please give me instructions.

    Hi,
    From the printer front panel, click the Setup Button, located above the Right arrow..
    Click the right arrow till Tools will appear, then click OK.
    Click the right arrow till Restore Factory Defaults will apper, then click OK, The printer factory defaults will be restored.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Script to reset factory defaults on multple routers

    Hi All,
    We have a number of routers and switches that need to reset to factory defaults the devices have been locked out with security (U/N and P/W are unavailable). A Terminal server has been configured with 2 X NM-16A with the octal cables and connectivity is working.
    Can you please provide an example of a script which will send the CTRL Break signal during bootup while connected via terminal server to the devices using a octal cables (serial console connection) or is there a utlity to connect to multiple devices and reset the factory default settings. We have literally hundreds of devices to reset.
    Look forward to your response.
    BR,
    Jay
    07818 418 147

    Well my problem... wait I thought I described it...
    Every week it's like my DHCP goes out of wake and cuts off ip distro on my network causing all LAN and wireless connections to have a yellow exclamation on there network devices... no amount of power resets will fix it ... only a restore factory default on the router itself will bring back everyone online.

  • Vista sp1 and restoring T61 with thinkvantage to factory default

    Hi, I already have Vista SP1 installed on my T61, but is it possible to make the image in the hidden partition Vista SP1 as well? (So after I do a reset to factory default in the future, it will already have SP1 installed). thanks!
    Message Edited by gecko on 03-19-2008 08:30 PM

    nope.   sorry.
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • IOS8 is too slow on iPad3! Can I restore to my 7.1.2 backup without resetting to factory defaults?

    IOS8 is too slow on iPad3! Can I restore to my 7.1.2 backup without having to reset to factory defaults? I have both iCloud and iTunes backups....

    No.
    Apple has no support or provision for reverting to a previous iOS version.
    Try a reset of your iPad by holding down the power button and hone button simultaneously until your iPad screen goes black and the Apple Logo reappears on screen, then let go of the buttons.

  • C855-S5190 restored via recovery to factory defaults, ran the Toshiba updater, no Windows Update

    I'm desperately searching for help!  My elderly father has a C855-S5190 and after trying the update to Windows 8.1 from the store, the laptop doesn't boot all the way up - kept giving various errors.  So, he dropped if off for me to try to fix.  I couldn't get around it so I did the restore to factory defaults from the restore disks.
    After that all finished, I tried the Toshiba service station and it gave me about 7 updates that I installed.  After that, I rebooted and then wanted to see about doing the Windows 8.1 update.  Went to Windows Store - it says I need to do Windows Updates.  I went to search, and now there's no Windows Update showing anywhere.  I checked settings, and everything is empty under there as well.  What happened??
    If someone could tell me how I can possibly do the Windows Updates.  I tried this once before trying the service center, the updates either fail, or they install, then it reboots, can't configure them, and gets stuck in a loop of trying to roll things back.  That caused me to have to do another restore to factory defaults - I've had to do it 4 times so far, and I just don't want to get stuck in that loop again.  So, I need to know what happened to my Windows Update, how do I get it back, and how the heck do I get this thing updated to 8.1?
    I booted a Linux live media before starting and was able to recover the files, etc., he had on it to a USB flash drive since I knew doing the restore would wipe that all out.
    Any and all input is GREATLE appreciated!!
    Dave

    Here's the link to the Microsoft page,  I had to do this to get Windows Update to run.  The Windows 8.1 upgrade would not let me do the upgrade until Windows Update was run, and I kept getting this error.  It takes a *long* time for this to straighten out if you've done a factory defaults restore - several reboots, etc..
    http://support.microsoft.com/kb/949358

  • So I backed up my iPhone on iTunes and I need to erase everything and restart my phone to factory defaults. If i erase everything then click restore will that work?

    SO I BACKED UP MY IPHONE ON ITUNES AND I NEED TO ERASE EVERYTHING AND RESTART IT TPO FACTORY DEFAULTS. IF I ERASE EVERYTHING ON MY PHONE THEN CLICK RESTORE BACKUP ON ITUNES WILL THAT WORK?

    Thank you so much! I was really hesitant because I did not want to lose everything on my phone. 

Maybe you are looking for

  • PDF Report as batch job

    Hi Experts!! I am looking for solution for a report which will be executed at specific time/day everyweek automatically and generate mulitple letters (PDF or DOC document). The letters will get data from the database i.e. cust#, name and address. I w

  • Black default ipod touch wallpapers?

    When I went to change the background of my ipod and decided to use one of the default wallpapers, they were all plain black, even when I selected them. This ipod has also been restored very recently, so I cant honestly understand why this has occured

  • Premiere Elements 7 won't render video

    I cannot get Premiere Elements to finish rendering my video in AVI format.  I have tried multiple codecs.  I have done it on 2 computers with 4 gigs or RAM, and dual core processors made in the last 2-3 years.  One had Windows 7 and one had Windows V

  • My trial download was accidentely removed from my computer, with 24 days left, I tried to download again, nothing happens?

    What can I do now?

  • Agenda

    Hallo, Het bladeren in mijn agenda is vertraagd sinds 2 maanden. Na 4 of 5 data bekeken te hebben duurt het minstens 2 min dat hij naar een volgende datum gaat. Hij blijft dan als het ware "hangen". Mijn agenda wordt geconfigureerd met mijn outlook w