CSM 4.2 RME and Common Service Question

Hello,
we're planning to use CSM 4.2. We already using Cisco LMS 4.1. Is it possible to use RME and the Common Services from the existing LMS 4.2?
thanks for your feedback
Alex

If you are not using the 64-bit CSM, then you can share the same RME instance (Till LMS 3.2), just have to see the server ip within CSM options:
http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/4.2/deployment/guide/cmsdg42.html#wp47518
Resource Manager Essentials (RME)
4.3
This is the officailly supported version for CSM 4.2
I don' t think the new prime architecture is officially supported (LMS 4.2.x)
Regards
Farrukh

Similar Messages

T410 type 2516-A11 multiple monitor (and cleaning service) question

Hi guys,
I have the above mentioned model. I want to verify my understanding (from reading the forums) is correct regarding the multiple monitor setup.
This model is NOT capable of running 2 external displays + 1 internal laptop display all at the same time. I checked the BIOS and i dont see any mention of nvidia. Is there any way i can get 3 monitors all displaying at same time without purchasing a dock-3 ? I am considering simply buying another laptop (about $300 for a cheap one) instead of spending money on the dock. After all, this laptop is getting old and i need to get ready for some kind of unrecoverable crash. (I do not backup stuff, for lack of time and stuff is not work related).
The second question is on cleaning this laptop. After running 15 hrs a day, all days of the week, for past 2 and half years, this laptop has impressed me with its stability. But i had to buy a laptop cooler to hold the bottom of the laptop because it started getting hot and crashing on me every 2 days (because i run video intense app for much of the time). I am planning to take it to local fry's electronics for taking it apart and getting a good internal cleanup done on this. Is there any precautions i should mention to the fry's technician ? I am planning to backup important files, just in case the laptop dies after that. Would like to hear any stories (good or bad) after a cleaning service on T410 model.
Thanks in advance; i am planning to get this machine rejuvinated during this christmas break.

Hi,
if you remove "encryption mode ciphers aes-ccm tkip" from the radio interface does it help?
it should remain like this:
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 1 mode ciphers aes-ccm tkip
ssid WLAN_Corporate
ssid WLAN_HartKitGuest
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

LMS 4.1 Common Services and RME Question

Hello,
we are using Cisco LMS 4.1 and we going to deploy Cisco Security Manager 4.2 as well. Can CSM and LMS share RME and Common Services?
thanks in advanced
alex

No that is not foreseen, so not supported. Use 2 servers.
What can be done is having the DCR's in sync by having a common service as master and the other as slave.
Cheers,
Michel

RME + Common Services + User defined fields

Hi
We have installed CSM and RME + MCP and are going to use RME now
Does anybody using the 4 "user defined fields" at Common Services ?
If yes , which data do you write to the fields ?
sincerley Alfred

Hi Alfred,
These feilds are for the user defined values for the device location or any other value that you want to define for the device. Later on you can use these feilds for generating customized Inventory reports etc.
So, lets suppose apart from all the other information like ios version of device, SysobjectID etc that being collected during the pharse of Inventory collection by RME, there are some more feilds/tags that you want to defined for the devices, you can mentioned it here and later on you will have the option to run the query on the basis of these parameters to get the reports for your specific devices.
For more information, kindly refer to the below User guide :-
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.3/user/guide/invent.html
Hope it helps,
Many Thanks,
Gaganjeet

WebI Processing server 4.0 and its common services

Hello there.
Tried to search here as well in SAP notes area, but did not find anything useful. Problem here is that the default WebI processing server was deleted and when I'm trying to create it from a scratch it allows to add only single service, for example: WebIntelligence Core service or WebIntelligence Common service etc.
By default WebI pro server consists of Core, Processing,Common, Information Engine service... ok the last one can be added to APS server, but how to get tose 3 Core/Common/Processing to single server, I can't add them from a list because it's empty. I do not want to recreate the SIA node, but the problem here is that one of those services consuming huge amount of memory...more than 6GB of mem and I do not see the switch how to turn it out.
many thanks in advance

Hi again
I do not like to bump like this, but maybe somebody have any idea how to deal with it? Maybe it makes sense to add this question to diferent thread?
Aiwar

ACS 5.0 and Cisco common services integration

Hi all
Has anyone here successfully integrated Cisco common services into ACS 5.0?
I have successfully done this with ACS 4.2 but I dont think CS understands the new way to connect to ACS 5.
I have already read the following guide, it basically fails when you click the apply button under AAA mode in CS to connect to the ACS server.
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/prod_white_paper0900aecd80613f62.html
So I can see port 49 connects but CS cannot access the web interface to deploy its authorization sets.
-Tacacs+ Connectivity Reachable
-HTTP/HTTPS Connectivity Not Reachable
Protocol mismatch detected.
Ive tried both http and https, get same error
Any suggestions would be helpful.
Cheers all
Dale

Answered by Cisco here
http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&topicID=.ee71a02&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cd43d08

SSL certificates and Web Services Usage inside Oracle Database Questions!

We have implemented a specific business logic using PL/SQL for our client, so we open a file and process each line of this, doing something in the Database and also call a Web Services (Service1) using UTL_HTTP package. Service1 runs in a Windows 2008 Server in the DMZ as Database server.
Service1 is already working, and we can call the service from PL/SQL without troubles.
However, according with security client's policies they requires all Web services be consumed via https including Service1, so we must to follow the procedure established for Oracle in order to enable the calling of service1 via https from the Database.
Our client's DBA and IT Team are concerned about two subjects before to continue to follow the certificate installation:
     - SSL Certificates:
1- Can installed certificates in the Database put in risk the stability of the database?
          2- Can installed certificates in the Database generate performance issues?
          3- Can installed certificates reloading the Databases?
          2- Can installed certificates in the Database generate security issues?
     - Web services:
1- Can web services calling from the Database put in risk the stability of the database?
2- Can web services calling from the Database generate performance issues?
3- Can web services calling from the Database generate security issues in the DMZ?
Could you please give us any clues, about the possible negative impact related with the SSL certificates and Web Services Usage inside Oracle Database, if it’s the case this impact exists?.
Those are the links describing the procedure mentioned above.
1 -http://www.kotti.es/2009/11/oracle-wallet/
DB: Oracle 9i.
Average number of lines in file: 300
Periodicity: Twice at day.

Thiago:
You are correct in that there should be no problem interacting with a Web service that has an HTTPS endpoint as long as you create a wallet and specify it when you make your UTL_HTTP calls, like the PayPal example.
I am not aware of a PL/SQL utility to create a XMLDsig Standard message, but if you find some Java source out there that does it, you may be able to follow a technique I used for a similar use case:
http://jastraub.blogspot.com/2009/07/hmacsha256-in-plsql.html
Regards,
Jason

Problems with adding a new device in Common Services

Hello,
I have the following problem: I need to add a new device in my Cisco Works. What I do is I go to Common Services >> Device and Credentials >> Device Management. There I click "Add" and I add the new device with the corresponding credential set.
Then, in the RME >> Job Management >> RME Jobs I can see a new job created (
CDA:CDA job due to Device Add. ) because of this addition but this jobs stays always in status Running and it never finishes. Most probablt because of that this newly added device never actually appears in the RME so I cannot operate with it - deploy software, save configs, etc.
I did this test a few times and all the times this is the result.
I tought that it might be a firewall issue blocking some protocol needed for the communication, as SNMP, telnet or something else. But if I go to Decice Center and I select this newly added device (which there appears with the question mark icon, not with the right device icon) I can see all the information for it, like Detailed Device Report, etc.
Then I noticed that in the RME Jobs section I have some more jobs that are like running forever - "
CredEditCDA: CDA job due to Credential Edit".
See the attached image for details:
So, my question is what might be the reason for this behaviour and what can I do in order to unblock these jobs and add my device normally?
What I use is:
Windows Server
LMS 3.2
RME 4.3.0
Thank you in advance,
Vesko

OK,
first of all, have you intergrated lms with ACS ? - check in common services - server - security - single-server mgmt - local user policy setup.
If this is in ACS, check if the newly added devices is in ACS... Check if this devices is reflecting in common services itself...make sure that the device type is selected properly ???
Next do a snmp test in device center for this machine..how would you do this --" in device center, select the device, do a management to station and select the snmpv2 and ok it" you will get if snmp is failing or not...As you mentioned it is coming in question mark..this is because the correct device type is not selected in common services.
Do an update inventory & archive and check the status..
~ rate if this was helpful.
-rajesh

LMS services in Common Service can't start

Hi all!
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Calibri","sans-serif";}
1.     My server have problem with service. In RME module, I see “JRM service could be down, Check whether JRM services are running”. But I go on Common Services > Sercurity > Admin > Progess. I don’t see any services. I don’t know how to start all services ? This server is running LMS 3.2. Thank so much!

Hi ,
To Start all the Services :
TO STOP :        /etc/init.d/dmgtd stop   ( for solaris)
                        net stop crmdmgtd       (For windows)
TO START :      /etc/init.d/dmgtd start ( for Solaris)
                        net stop crmdmgtd      ( For Windows )
If the issue does not resolved after Restarting the services.. please send me the output of pdshow
> go to commnd prompt : type pdshow >pdshow.txt   ... send me the pdshow.txt file
Also share the screen shot of SERVICES.MSC window !!!
Thanks--
Afroj
If this post answers your question, please click the "Correct Answer" button"

Difference between Business system and Business service.

Hi All,
Can any one explain in detail difference between Business system and Business service.
As we commonly say, Business service is for those system which are not in our landscape.
Can any one explain in which particular scenarios we will go for Business Service.
Reg
Bapuraj

Hi Bapuraj,
Business System
Business system is a logical system, and there is an importance on physical existence of the system.Also SLD entry is required.
It is generally used for SAP applications, this is just a general prinicple followed but not mandatory.
Business Component(formerly Service)
You use a Business Component, when you do not have the System details of the the partner system to which you want to communicate. i.e. you have not configured the partner system in SLD.
Business Service is an Absract Unit with Sender and Receiver Interfaces,In this case you need to explicitly add the message interfaces while doing configuration in ID.
It is generally used for NON-SAP applications, this is just a general prinicple followed but not mandatory.
<REMOVED BY MODERATOR>
<LINKS CAN BE SEARCHED FOR BASIC QUESTIONS>
-santosh.
Edited by: Prateek Raj Srivastava on Jan 12, 2012 10:01 PM

How to remove devices shown in RME and not existing in DCR?

I have problem with some devices (in fact IP addresses) that was discovered and used by RME in the past but are not reachable anymore. They spoil statistics in RME (collection of inventory and configuration) however they do not exist in DCR. Do you have any ideas how to get rid of them?
RME: 4.2.0
CS: 3.2.0

Check Common Services > Device and Credentials > Reports > Devices not configured in ACS to see if your devices show up there. If they do, then you will need to either add those devices to ACS (temporarily) so you can remove them from DCR; or you will need to temporarily disable ACS integration, remove the devices from DCR, then re-enable integration.

How to resolve hostname in Common Service 3.3 ?

hi guys!
i have a problem when discover my devices in ciscoworks common service 3.3.
i discovered use module setting cdp and ping sweep , preferred dcr name is hostname, and update dcr display name is checked.
i hope the hostname is show in display name but there is ip address.
i search this problem is bug CSCsq54877 and CSCsv65933 but its resolved in common service 3.3.
my question:
there is any problem in my discover settings or is still a bug.?
could anyone help me to preferred show hostname than ip address ?

i make a trick.
i use hosts.etc in windows server where the ciscoworks installed

Apache Tomcat error on common services (Device Update)

I have installed lms 3.2 on server 2008 , and when I click on device update in software center I recieve an error
which I inserted down here ;
I have to mention that I also have installed Common services patch .
please some one help me this out .
which I

Hi,
Kindly check if you have CSCtj20850-0.info at location CSCOpx\setup\patch
Try this workaround too as it look like rme map files got corrupted :-
Navigate to -->
CSCOpx/www/classpath/com/cisco/nm/xms/psu/maps
Backup these two files (rme*.map) at another location and finally delete them from this location. You need to stop the daemon manager to be able to delete this files with the command net stop crmdmgtd.
Now, run the following command two command, rememer they are one line command :-
1>
set NMSROOT=%CWMIBDIR%\..\..\..
2>
%NMSROOT%\lib\jre\bin\java -classpath %NMSROOT%\lib\jre\lib;%NMSROOT%\lib\classpath;%NMSROOT%\objects\log4j\1.1.3\log4j.jar;%NMSROOT%\MDC\tomcat\shared\lib\MICE.jar;%NMSROOT%\MDC\tomcat\shared\lib\NATIVE.jar;%NMSROOT%\MDC\tomcat\shared\lib\jdom.jar;%NMSROOT%\www\classpath;%NMSROOT%\lib\classpath\servlet.jar;%NMSROOT%\MDC\tomcat\webapps\cwhp\WEB-INF\classes com.cisco.nm.xms.psu.packagemgmt.map.CreateMaps %NMSROOT%\www\classpath\com\cisco\nm\xms\psu\pkgs\rme
The above workaround should generate the rme*.map files again and then it should work fine.
Now, start the daemon manager and wait for 20 minutes before logging back to CiscoWorks.
Note :- Its important to backup (rme*.map) before deleting them.
Many Thanks,
Gaganjeet Singh

LMS 3.2 common services error

Hi all,
I am facing a problem with my LMS 3.2 server. Suddenly I found there is no device reflecing in common services-> device management as well as RME also. I restarted LMS services, server multiple time, reseted casuser, demoted the server from ACS mode to local mode but no luck. However in "dcrcli" i can see all devices and exported all devices to CSV file.
After this I restored from a backup 3 month old when devices were reflecting under common server and RME device management. this also not resolved the problem.
I uninstalled LMS, performed system cleaning and reinstalled LMS 3.2. Then I imported the devices from CSV file i had. Now also the problem not got resolved . I can see devices in dcrcli but none of the device is reflecting under device management of any module.
In Dcmaservice.log i found the error" ERROR,[main],com.cisco.nm.rmeng.config.netshow.server.admin.NSCommandSetManager,getAllCommandSet,8661,Invalid MDF data file:D:/CSCOpx/lib/classpath/com/cisco/nm/cwcs/mdf/mdfdata.xml"
Hence I restored teh mdfdata.xml file from another server. However now i can see the following errors
1) in common service -> software center -> device updae -> device count are 0 for all module
2) no device is reflecting under any module
3) one progress i saw when tring to add any device if selecting device type, it is showing me the list of device type along with OID. before restoring mdfdata.xml it was also not comming.
Please help me to resolve this.

Hi Martin,
Yes you are correct. I did the fresh installation. Imported all devices from the CSV file. However
1) none of these device is showing up in CS>device & credential >device manag
2) Also none of these device are showing up in any other module
3) In Dcrcli i can see al the devices are there
4) for testing I added few device manually. Those are also not showing in any module.
Just to inform all the modules are configured with Auto mode along with manage all devices in Auto Allocation settings under device management.
Thanks & Regards,
Satya

Common Services Device Update

I have just completed an Install of LMS 3.2
I have tried to apply the latest device update package the download site for DFM.
However I get the following message "consitency check for base package DFMSharedUpdates."
When I look at the Common Services, Software Center, Device Update ; all the device type counts are zero except for CiscoView and Resource Manager Essentials. I would have thought that the DFM section would have a value other than Zero.
How do I apply the Base Package for DFM and what is the file location.
Thanks Mark

Make sure you also download and install the MDF update for Common Services. In fact, check the boxes next to RME, Common Services, DFM, CiscoView and Campus Manager. Install all of the available device updates for each application. When done, you should have non-zero device counts for RME, DFM, and CiscoView.

CSM 4.2 RME and Common Service Question

Similar Messages

Maybe you are looking for