CSM 4.7 Report Manager User Report Issue
Hi,
Since we upgraded CSM 4.7 from 4.6, suddenly Report Manager is unable to generate VPN User Report, same as Connection Profile Report and VPN Device Usage Report, error message shows below. However, under FW-Summary Botnet (Top Destination, Top Services, Top Sources) those reports are fine. If I ran older than the time we upgraded 4.7 (like last week, last month) I could get the data, only right after the upgrade, no data since then. We opened a TAC ticket, but they could not resolve it and said it is a known bug, also applied patch which did not work either. In Event Manager, it has all the event logs, and Configuration Manager seems to show Event Manager setting correct as well. Anyone has encounter this issue and has solution? Please help, thank you!
***Error Message***
No Records Found
- Event Manager may be down or no data received from Device
Hi @shawng001,
I have installed the CSM 4.7 on my VM windows 2008 server pack2, i am getting the logs from my devices like ASA firewall and Router. But i am unable to generate report logs and mail alerts. I hope you can help me in this...........
Thanks in advance....
@udaychalla
Similar Messages
-
Performance Report Manager Data Collection Issues
I have an agent running and collecting data in a circular file.... history.log
Data Collection has failed approximately 6 days ago without warning. I have tried to find out the issue and have not had any success.
If I open the Data Collection Window in PRM I see a Yellow triangle beside the hostname:port.
If you can provide any information as to what to look for, please reply.history.log may be corrupted. If you run it through ccat to flatten it does it show any recent (i.e. newer than 6 days) entries?
If ccat gives errors then just move it out of the way (i.e. rename it to history.log.busted) and restart your Agent. A fresh log will be created. Give it a couple hours to make a couple flushes of data to your SunMC Server and see if PRM works.
Regards,
Mike
[email protected] -
Hi
Thank you for your support.
I have a Vista laptop that cannot connect to Report Manager URL. Same Windows account on an XP machine works just fine.
Note: - Reporting Services is not installed on Vista machine , this is a client that connects to a SQL Server 2008 R2 and Reporting server instance.
On Vista workstation, I tried diabling UAC, tried Run As, added trusted sites, other browsers, IP/FQDN/name changes in URL. - no change.
Server Error in '/Reports' Application
Some or all identity references could not be translated.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
[IdentityNotMappedException: Some or all identity references could not be translated.]
System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)
System.Security.Principal.SecurityIdentifier.Translate(Type targetType)
System.Security.Principal.WindowsIdentity.GetName()
System.Security.Principal.WindowsIdentity.get_Name()
Microsoft.ReportingServices.UI.GlobalApp.Application_AuthenticateRequest(Object sender, EventArgs e)
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
MaccaHi Macca,
Per my understanding that you got the error message when access the report manager in the client vista machine which have't install the reporting services instance and access to the Windows XP machine works fine, right?
I assumed that you have installed the Reporting Services instance in this WIndows XP machine, Could you please check in the third machine with the vista os to see if you will got the same error message.
The issue can be caused by many factors:
If the third machine can connect to the report manager remotely, the issue can be caused by this vista machine.
Similar thread for your reference:
http://www.windows-tech.info/15/69e51d5566a67ef2.php
https://technet.microsoft.com/en-us/library/bb630430(v=sql.105).aspx
If the other machine also can't access the report manager, the issue caused by some configuration not correct for the remote connection(https://msdn.microsoft.com/en-us/library/ms156305.aspx)
If you are using Windows Vista or Windows Server 2008, you must configure Report Manager for local administration, please check to make sure the "Service Account" is the domain/user account which exists in the local administrator group.
Please check the rsreportserver.config file and make sure <RSWindowsNegotiate/> is the first value in <AuthenticationTypes> section. By default, the rsreportserver.config file is located in the path like: C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting
Services\ReportServer
Similar thread for your reference:
Reporting Services 2008 Web Service URL - Access Denied error
http://www.sqlservercentral.com/Forums/Topic697167-146-1.aspx
If your problem, still exists, please try to provide more details information in the log file which path is: C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles
Any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
SSRS 2012 multi select parameter not working in Report Manager.
Hello,
I have one report with Multi select parameter. its working fine in bids, report server but I am facing some issue on report manager 2012.
Issue is, In Multi select parameter I have Suppose 6 value a,b,c,d,e,f after the deployment on report manager for the first time report is working fine with selecting all the value. but for the second time if my selection include either
a or f report gives no result and check box get unselect.
I also try on different report manager but same result.
what can be a issue here causing problem only for two value but working fine for other value?
Thanks,Hi Javed,
The Issue is with when you click on View Report button of Report Manager for Parameters which contain CHAR(10) and CHAR(13).
Where ever that Column is used in Report Data Set ,
Use replace(replace(Param,char(10),''),char(13),'') function.
----------------Please Mark This as Answer if it helps to solve your problem---------------------------- -
Recieving Error Viewing Reports in Report Manager
I am receiving the following error trying to view a report in Report Manager and Reporting Services: "
Your browser does not support scripts or has been configured not to allow scripts" I have ensured that scripting is enabled and added the site to my trusted sites and still does not work. What am I missing? I am using SQL Server 2008
R2. My reports work fine in a test windows application, but not in the browser.
I can see the header and footer of the report and the toolbar, but the body is empty. It's only when I select view source that I see the error.
Here is the complete error when I View Source:
<noscript>
Your browser does not support scripts or has been configured not to allow scripts.
</noscript><span id="ctl31_ReportViewer"><div id="ctl31" onclick="if ($get('ctl31_ctl04') != null && $get('ctl31_ctl04').control != null) $get('ctl31_ctl04').control.HideActiveDropDown();" onactivate="if ($get('ctl31_ctl04') != null && $get('ctl31_ctl04').control != null) $get('ctl31_ctl04').control.HideActiveDropDown();" style="height:100%;width:100%;">
<div id="ctl31_HttpHandlerMissingErrorMessage" style="border-color:Red;border-width:2px;border-style:Solid;padding:10px;display:none;overflow:auto;font-size:.85em;">
<h2>
Report Viewer Configuration Error
</h2><p>The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebUserInterface, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" /> to the system.web/httpHandlers section of the web.config file, or add <add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebUserInterface, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" /> to the system.webServer/handlers section for Internet Information Services 7 or later.</p>
I even get these errors in a test web application, even though scripting is enabled and my httpHandlers are defined in my web config for both system.web and system.webserver.Hi Christie Tremblay,
Based on your description, you are experiencing the issue when you trying to view a report in Report Manager and Report Server, you got the error message ”Your browser does not support scripts or has been configured not to allow scripts” and “The Report
Viewer Web Control HTTP Handler has not been registered in the application's web.config file”, but the report work fine in the test in the test windows application, right?
If you use IIS 7.0 in Integrated mode, you must keep the HTTP handler that applies to your IIS version in its respective section. If you remove or modify the HTTP handler configuration settings, the ReportViewer Web server control in your Web form will display
the error message ”The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file” that tells you to add it back to the respective section in the web.config file.
In your scenario, the issue may occur due to one of the following factors:
Incorrect Web.config settings for ReportViewer control
Incorrect report path typed into the ReportViewer control
Improper Managed pipeline mode of the Application Pool
Open the IIS Manager, verify the Managed pipeline mode is set to Classic not Integrated.
For the error “your browser does not support scripts or has been configured not to allow scripts” can be caused by the browse you are using not support to open the Report Server and Report Manager:
http://msdn.microsoft.com/en-us/library/ms156511(v=sql.105).aspx
Article about details information for your reference:
Verify the Web.config settings for ReportViewer:
http://msdn.microsoft.com/en-us/library/ms251661(v=vs.100).aspx
If the Report Viewer control is configured to run in remote processing mode, please ensure the report server URL or the report path are correct. For more information, please see:
http://msdn.microsoft.com/en-us/library/ms252075(v=vs.100).aspx
Similar threads which already resolved for your reference:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/e515595c-7c63-4852-a9c4-bc4254341453/report-viewer-controls-are-disabled?forum=sqlreportingservices
https://shahjadatalukdar.wordpress.com/2013/08/05/rdlc-web-config-settings-for-reportviewer/
If you still have any question, please feel free to ask.
Regards
Vicky Liu -
Report and user statistics display in Obiee report
I have a requirement in OBIEE like i need to generate a report and that report has to display some valuable information dynamically.
The report consist following column info...
Report Name|Report Folder|Report Path|Description|Description ID|Owner|Subject Area
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Header 7
Header 8
Header 9
Report Name
Report Folder
Report Path
Table
user
Unused ColumnIDs
Column Created
Report Creator (user)
Report last modified
like etc..........
SO, the above said fields has to be update and provide dynamic data in the report. (Also those field info is not available in Usage tracking table so we need get those information from Catalog manager also...........)
For this I have one alternate idea like to get the solution by planning to get this solution by CSV file.If you would provide any solution like CSV get updated dynamically from Catalog manager it would be a great thing to me....Your help is highly appreciated.
How to implement this requirement ............could you provide a right path to achieve this solution.
I hope yours alternative solution.Thanks for the reply Yannick.
We have install/configure WebCenter analytics and activity graph.
Wehave added Login Metrics in our Group Space and we are getting default login count for specific time frame but when we define a filter under User Property of any property like city, department name, phone title etc after refreshing data it is giving error like
WCS#2011.03.31.12.47.31 : Irresolvable error(s) occurred. You may want to contact Administrator with the error reference.
Please help how to solve this. -
can anyone kindly provide some link or document on Report Manager which has all the necessary information pertaining to it,Report Manager in 11i and R12.
i shall be grateful....
regards
ratnakar mittalRefer to "Oracle Report Manager User Guide" Manual.
Applications Releases 11i and 12
http://www.oracle.com/technology/documentation/applications.html -
How to define a report manager ?
Hello Friends,
I'm a newbie to Oracle Apps R12. I have created a user TEST and have assigned responsibilities : General Ledger User, General Ledger Super User, Financial Management, Report Manager, Report Manager Public Reports.
But when i try to run the report 'Chart of Accounts - Account Hierarchy', i get the following error.
Phase : Inactive
Status : No Manager
Request ID : 4348352
Diagnostics : This request will not be processed because there are currently no managers running that can process it. This is an error condition. There are one or more managers defined that can process this request that should be running at this time, but do not appear to be running. Contact your system administrator and/or check the manager log files for errors.
I guess i need to have a report manager. And i read the following somewhere,
" The Report Manager seeded functions need to be assigned manually by the System administrators to appropriate responsibilities based on the types of reports a user submits and publishes in their job. For example, a system administrator might assign the Financial Report Template Editor and Financial Report Submission functions to an existing General Ledger responsibility already used for submitting Financial Reports by General Ledger users."
But my question is how do i add functions to a existing responsibility.
For starters, i need to be able to run an existing report.
Pls guide me.
Thanks,
Amol
Message was edited by:
OraMolThe Standard manager and the Conflict Resolution manager and most of other managers have now started. It was only that the Node value was not defined for these managers. I updated it and they were activated.
Please excuse me as being a beginner, my questions may seem silly.
Now, how do i view a report output after submitting a report request ?
Will the output appear as a link and where? If i can specify it, where do i specify it ?
What Responsibility do i need to assign to the user to be able to view the output?
I am reading the Oracle Report Managers User Guide, its just that i'm not being able to map the theory and practical that accurately (lack of screenshots in the docs). So, a few practical operational tips will surely help me a lot in this regard.
In the documentation its said that "The system administrator assigns Report Manager menu items to various responsibilities. Following are the available menu items:
• Financial Report Submission... etc "
But i could not assign the Financial Report Submission responsibility to my Test user in Sysadmin login. The said Report Manager responsibilities were not available in the LOV.
Thanks.
Message was edited by:
OraMol -
Oracle standard reports (non FSG) using Report Manager
Hi,
I was wondering if Oracle standard report (non FSG reports) can be run/published from Report Manager. If yes, can somebody provide me the steps to run/publish these reports?
Thanks in advance.
Thanks
SamSam,
I have never tried this believe but I think it is not possible (I am not referring to standard concurrent programs which are submitted through WebADI/ADI). You may give this a try by assigning certain module/application and make it print to this concurrent manager and see if it works.
BTW, what is the point of running standard concurrent requests on Report Manager?
Note: 256286.1 - Report Manager Frequently Asked Questions (FAQ) - Install/Upgrade
Oracle® Report Manager User's Guide
http://www.oracle.com/technology/documentation/applications.html
Regards,
Hussein -
Could anybody explain me in shortly what are Oracle Report Manager (FRM) and Web Applications Desktop Integrator (BNE) used for ?
Thanks,
PaulOracle Report Manager is an online repository for storing and viewing reports. Report Manager provides a secure and convenient location to access point -in-time reports published or uploaded to a database. You access secured reports through your Personal Home Page (Self Service Applications home page and Oracle Portal page). Public (non-secured) reports can also be accessed through the Report Manager Public Home Page. Oracle Report Manager users can be either report producers or report consumers. Report producing users publish, upload, and set security for reports. Report consumers view, download, and approve reports.
Oracle® Report Manager User Guide
http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/frm115ug.pdf
Web ADI brings Oracle E-Business Suite functionality to a spreadsheet, where familiar data entry and modeling techniques can be used to complete Oracle E-Business Suite tasks. You can create formatted spreadsheets on your desktop that allow you to download, view, edit, and create Oracle E-Business Suite data. Data entry shortcuts (such as copying and pasting or dragging and dropping ranges of cells) or even using formulas to calculate amounts, can all be used to save time. You can combine speed and accuracy by invoking lists of values for fields within the spreadsheet.
Oracle Web Applications Desktop Integrator - Implementation and Administration Guide
http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/115bneig.pdf -
Report Manager issue in FSG and WEB ADI
We have four Application Instances and one Database with R12.0.6 and DB version 11.1.0.7 with Load balancer Configuration.
The Application is running fine with Load balancer configuration, But we are facing the below issue with report manager.
Even We tried uploading a template from Report Manager in FSG also we are getting the below error.
But when we remove the load balancer and use the actual host name, It works fine.
If somebody has encountered the same issue , Please let us know, as it is little urgent.
We are facing the below issue .
Navigation:
GL Super User -> Launch Journal Wizard -> Functional Actuals - Multiple -> Create Document
Open on WebADI Spreadsheet and we get below error.
Exception Name: oracle.apps.bne.exception.bnefatalexception-Error loading class: Log file bookmark : 819117
Thanks,Duplicate post.
Attempting to Upload an FSG template error
Attempting to Upload an FSG template error -
Hello,
I have a big problem with Reporting Services 2005 working on Windows 2003 Server.
RS work as Network service, on subdomain reporting.mydomain with SSL wildcard certificate *.mydomain,
Anonymous access: disabled and basic authentication: enabled
ReportManager and reportServer has defualt virtual folders (/reporting, /reportserver)
My problem is:
1) I can't manage security roles and site settings with report maanger. when I try assign roles to new user or group I get followng error:
"The user or group name 'BUILTIN\Administrators' is not recognized. (rsUnknownUserName) Get Online Help"
when i try to execute reports in report manager, parameters controls are not displayed correctly (very simple text boxes) and I can see:
The selected report is not ready for viewing. The report is still being rendered or a report snapshot is not available. (rsReportNotReady)
and I can't see my report in browser (IE 6.0) but only export to PDF, Excel...
other functionality are working fine i.e upload new files, creatign folders....
2) Also my reportserver virtual folder does not work correctly.
When I navigate to mydomain/reportserver I can see content of this virtual folder, than when I navigate to ReportService.soap i can see normal ReportServer view
reporting.mydomain - /Reportserver/
[To Parent Directory]
Montag, 10. April 2006 16:31 <dir> bin
Dienstag, 6. September 2005 01:12 488278 Catalog.sql
Dienstag, 6. September 2005 01:12 14738 CatalogTempDB.sql
Freitag, 21. April 2006 19:45 10555 Copy of rsreportserver.config
Freitag, 14. April 2006 17:29 76 global.asax
Freitag, 15. Juli 2005 01:12 26582 ModelGenerationRules.smgl
Montag, 10. April 2006 16:31 <dir> Pages
Montag, 10. April 2006 16:31 <dir> ReportBuilder
Montag, 13. Juni 2005 14:07 143 ReportExecution2005.asmx
Montag, 13. Juni 2005 14:06 196337 ReportingServices.wsdl
Montag, 13. Juni 2005 14:07 131 ReportService.asmx
Montag, 13. Juni 2005 14:07 131 ReportService.soap
Montag, 13. Juni 2005 14:07 139 ReportService2005.asmx
Dienstag, 13. Juni 2006 20:01 10580 rsreportserver.config
Montag, 13. Juni 2005 14:07 11845 rssrvpolicy.config
Montag, 10. April 2006 16:31 <dir> Styles
Freitag, 17. Juni 2005 01:09 2673 web.config
but me reports are not displayed correctly, I can run reports but top bar with parameters, export and print function are not displayed in correct format.
(simple textboxes, and icons)
reporting.mydomain/ReportServer - /
Microsoft SQL Server Reporting Services Version 9.00.1399.00
I think it is security issue. What schould i do to solve this problems?
WojtekHi Wojtek
I just wanted to know if you found a solution for part (1). I just recently encountered the problem where:
"when i try to execute reports in report manager, parameters controls are not displayed correctly (very simple text boxes) and I can see:
The selected report is not ready for viewing. The report is still being rendered or a report snapshot is not available. (rsReportNotReady) "
However all my reports are run from the most recent data. The rsReportNotReady message appears in Report Manager but not the Report Server interface; the latter is able to render the reports. But both have incorrectly displayed textbox inputs.
Thanks
nemo -
"Manage Users" IR report displaying incorrect user types
Home>Administration>Users
APEX 4.0.2.00.07
DB 11.2.0.2
Found a couple of question-raising things:
1) User type is showing "Workspace Administrator" for almost all users (many are only users) with a couple identified as "Developer" (who really do only have developer privs turned on). If I knew the sql for the IR report I might find the problem - checked wwv_flow_fnd_user and wwv_flow_developers and they both look OK (no recs in wwv_flow_developers for the end users and those with given admin privs are marked as admin, etc.). Did find one dup group name but removing it didn't seem to have an effect.
2) Trying to find out what is going on I found the second: It appears that if you have assigned more than one group to a user (apex group to apex user), then add the group_name column to the Manage Users IR, you get the "single row subquery returns more than one row".
Haven't found any other posts here on this. Any ideas?
Thanks,
SteveThanks Richard - forgot about the builder import.
After taking the IR sql and working it I found the following:
In this apex installation...
There seems to be a problem with the outer join between wwv_flow_developers and wwv_flow_fnd_user which brings non-null values for d.is_admin and d.is_developer (and for us these are 'Y' if there are no matching records in wwv_flow_developers.
Changing the decode for DEV_TYPE to use a nvl for d.userid to set all users to end user if they are not in the wwv_flow_developers table fixes the display of user type.
Now I am guessing this is a data anomaly rather than a bug. Anyone have any ideas on why the outer join to wwv_flow_developers shows a not-null value for is_admin and is_developer?
Steve
Here is a mostly-intact version of the region source (I shortened it considerably from the code below to focus on the incorrect USER TYPE display issue):
select /* APEX4350P55a */
USER_ID,
u.user_name "USER",
u.email_address "eMail",
u.first_name,
u.last_name,
replace(u.default_schema,'%'||'null%',null) df,
decode(nvl(d.is_developer,'N'),'Y', (select case
when (wwv_flow_fnd_user_api.workspace_account_days_left(
wwv_flow_user_api.get_username(user_id)) > 0)
then m.password_valid
else m.password_expired
end expiration from dual),
m.no_developer_priv) developer,
decode (nvl(d.is_developer,'N'),'Y',last_login,null) last_login,
decode (nvl(d.is_developer,'N'),'Y',last_login,null) last_login2,
decode (nvl(d.is_developer,'N'),'Y',
nvl(builder_login_count,0),null) builder_login_count,
decode(nvl(u.account_locked,'N'),'Y',m.yes,m.n)ul,
case
when (wwv_flow_fnd_user_api.end_user_account_days_left(
wwv_flow_user_api.get_username(user_id)) > 0)
then m.password_valid
else m.password_expired
end expiration,
u.DESCRIPTION,
u.PASSWORD_LIFESPAN_DAYS,
u.PASSWORD_LIFESPAN_ACCESSES,
u.PASSWORD_ACCESSES_LEFT,
u.LAST_AGENT,
u.LAST_IP,
u.ACCOUNT_EXPIRY,
u.FAILED_ACCESS_ATTEMPTS,
u.CHANGE_PASSWORD_ON_FIRST_USE,
u.FIRST_PASSWORD_USE_OCCURRED,
decode(nvl(d.is_admin,'N'),'Y',
m.admin,decode(nvl(d.is_developer,'N'),
'Y',m.dev,m.end_user)) dev_type,
(select group_id from WWV_FLOW_FND_GROUP_USERS where user_id = u.user_id) group_id,
(select GROUP_NAME from WWV_FLOW_FND_USER_GROUPS where id = (select group_id from WWV_FLOW_FND_GROUP_USERS where user_id = u.user_id)) group_name,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
nvl(d.developer_type,'END_USER') developer_type,
decode(nvl(ALLOW_APP_BUILDING_YN,'Y'),'Y',m.yes,m.n) ALLOW_APP_BUILDING,
decode(nvl(ALLOW_SQL_WORKSHOP_YN,'Y'),'Y',m.yes,m.n) ALLOW_SQL_WORKSHOP,
decode(nvl(ALLOW_WEBSHEET_DEV_YN,'Y'),'Y',m.yes,m.n) ALLOW_WEBSHEET_DEV,
decode(nvl(ALLOW_TEAM_DEVELOPMENT_YN,'Y'),'Y',m.yes,m.n) ALLOW_TEAM_DEVOPMENT
from WWV_FLOW_FND_USER u,
(select USERID,
decode(instr(DEVELOPER_ROLE,'ADMIN'),0,'N','Y') is_admin,
'Y' is_developer,
case
when instr(DEVELOPER_ROLE,'BASIC_DEV') > 0 then
'BASIC_DEV'
when instr(DEVELOPER_ROLE,'ADMIN') > 0 then
'ADMIN'
when instr(DEVELOPER_ROLE,'CREATE') > 0 then
'DEVELOPER'
else
'UNKNOWN'
end developer_type
from WWV_FLOW_DEVELOPERS
where security_group_id = :flow_security_group_id) d,
(select wwv_flow_lang.system_message('F4000.NO') n,
wwv_flow_lang.system_message('F4000.YES') yes,
wwv_flow_lang.system_message('PASSWORD_VALID') password_valid,
wwv_flow_lang.system_message('PASSWORD_EXPIRED') password_expired,
wwv_flow_lang.system_message('NO_DEVELOPER_PRIV') no_developer_priv,
wwv_flow_lang.system_message('DEVELOPER') dev,
wwv_flow_lang.system_message('ADMINISTATOR') admin,
wwv_flow_lang.system_message('END_USER') end_user,
wwv_flow_lang.system_message('BASIC_DEVELOPER') basic_developer
from dual) m
where
u.user_name = d.userid(+) and
u.security_group_id = :flow_security_group_id
Edited by: stevehoward on Jul 6, 2011 11:37 AM
Edited by: stevehoward on Jul 6, 2011 11:40 AM -
Report manager crashes when users print
We recently changed from SQL 2005 to SQL 2008 we running Windows Server 2008 for some reason one of the users is unable to print on the report manager. Every time he clicks on the print button IE explorer 10 crashes. he is the only user so far
that has this issue. does anyone know what i can do to fix this.
thank youTry deleting the ActiveX control on their computer through Internet Options and having them try clicking the print button, which should initiate it to reinstall. You could also try turning on the "Compatibility View" in IE to see if that helps.
-
SSRS 2012 Report Manager web browser display issues
Hi Guys
I'm having a issue with the report manager display in explorer, Firefox and chrome web browsers, it doesn't display correctly, any advice would be greatly appreciated, thanksgo to your SSRS server and open your reporting server configuration Manager
Make sure that your Report Manager URL is
http://machinename:80/Reports and Web Service URL is
http://machinename:80/Reportserver
Roger
Maybe you are looking for
-
the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?
-
Get file metadata with Reader API
Hi It is possible to retrieve the metadata of a file with the Reader API? How? Thanks
-
I have formatted a photo book, but am apprehensive to push the "buy" button as I have ordered prints that I thought were cropped correctly, and they returned with heads cut off and half of bodies mising. I have put the book on a PDF file as instucte
-
Any help would be greatly appreciated!
-
Approver gets refreshed after the contract is released
Hi All, I am facing a problem while creating GOA i have activated the one step approval workflow WS 14000088 and have the agent assignment based on standard roles. I can see the approver picked up correctly in approval preview but when i release the