CSM: Define own variables for use with FlexConfig policies

Hello everyone,
I'm currently evaluating CSM and I was wondering if it's somehow possible to create variables that can be set per device.
Example: A variable set to the name or location of a customer that could be used inside a FlexConfig policy to create a banner message.
Regards
Lukas

The problem is that I do not have a color column....
I can choose a color in the chart designer and I also get to the same option when using the wizard. <i>I am not sure if it is the right wizard as I have never used the wizard for chart editing before. How do you open the wizard to edit an already existing chart?</i>.
In all the menus I can't find any place where I could add RGB. I have my RGB code and everything, I just need to enter it somewhere, so no external tools needed.

Similar Messages

  • Environment variables for use with EEM routing trigger?

    I've only recently started looking into EEM, and was hoping a guru here could clear something up for me:
    The docs do not show there to be any environment variables that can be used with EEM's "routing" trigger, to determine which route was added, changed, or modified.
    It seems odd that the trigger would allow you to fire specifically on adds or removes, but then give you no indication of the specific route that was added or removed. Is this info in some non-obvious generic variable?
    Or, is the only available approach to cache the route table, and then parse the whole table when the event fires? I haven't seen any examples that use this trigger; maybe because of this lack of any documented routing-specific variables?
    Thanks in advance!

    Every event detector has its own set of internal variables. These are different than environment variables. Environment variables are those you can modify in the config with "event manager environment". If you have a device which supports the routing event detector, you can run the command, "show event manager detector routing detailed" and that will show you all of the available internal variables.
    I actually did a programmatic applet example using the oruting ED for my Networkers session this past year. This example doesn't use any of the internal variables, but it will give you an idea of how this ED works:
    event manager applet route-watch
    event routing network 10.1.1.0/24 type add protocol ospf
    action 001 cli command "enable"
    action 002 set done 0
    action 003 while $done eq 0
    action 004 wait 5
    action 005 cli command "ping ip 10.1.1.1"
    action 005 regexp "!!!!!" "$_cli_result"
    action 006 if $_regexp_result eq 1
    action 007 cli command "config t"
    action 008 cli command "int Tunnel0"
    action 009 cli command "shut"
    action 010 cli command "end"
    action 011 set done 1
    action 012 end
    action 013 end
    This applet will be triggered when the route 10.1.1.0/24 is learned via OSPF. The applet will then try and ping 10.1.1.1, and when it is 100% successful, it will take down the backup tunnel interface. Because it may take a little while before the ping is 100% successful, the applet will loop until it gets a 100% success (or until the 20 second maxrun timer expires).

  • V-41 tcode error :Table 304 is not defined for use with condition type PR00

    Hi All,
    I am trying to create a BDC using the transaction V-41. 
    The first screen has fields:
    ConditionType and Table, where I have to fill values ZPM1 and 800 respectively.
    But as soon as I enter the tcode v-41 and say enter, the above mentioned fields are already having the  values 'PR00' and ' 304'. Normally if you take an example fo t-code VA02, all fields are blank.
    Then an error message  is displayed:
    Table 304 is not defined for use with condition type PR00
    This behaviour is not allowing me to use the BDC feature.
    Please advise me on why this is happening. What are the possible solutions I can use to clear these values programmatically?
    Can anything be done via customizing?
    Regards,
    Namita.

    Dear ILHAN ,
    Well the problem you are facing is having the following solution:
    Table 304 is not defined for use with condition type PR00
    Message no. VK024
    Diagnosis
    The selected condition type does not fit in the condition table, that is the basis for the condition record. Alternatively the selected condition type is not included in the condition types that were selected on the selection screen or that are defined in the variant of the standard selection report.
    Procedure
    Úse F4 help to choose a valid condition type.
    If this does not give you the required condition type, check in Customizing for condition types and the related access sequences.
    In the condition maintenance also check Customizing for the selection report (pricing report), that you have selected in the navigation tree, using the standard condition table as a reference.
    I hope this helps.
    It has worked for me.
    I gave it a try and what I am getting using the transaction V-41 is create Price condition (PR00) : Fast Entry.
    Please award points if you find it useful.
    Regards,
    Rakesh

  • Unsure about preparing a Dreamweaver Site for use with Contribute

    Recently I designed a small Dreamweaver Website (DW CS2) for
    a friend and it is already successfully online. So that my friend
    can manage her own website, I`ve decided to prepare this DW site
    for use with Contribute, but I'm unsure about the steps involved
    and what files I will need to store on the server. Is the following
    roughly correct?
    Step 1: Define editable regions in these html files and save
    these as html files.
    Step 2: Enable Contribute Compatibility in DW before I upload
    to the server.
    Step 3: Is setting up a Connection Key necessary for my
    friend`s access?
    Step 4: Upload these. Do these completely overwrite the
    existing Dreamweaver html files on the server? Or should I be
    saving in another file format?
    Many thanks to anyone who can advise me!

    I sugggest these steps:
    A: Dreamweaver:
    1. build you site based on (a) template(s) with editable
    regions
    2. upload the website to the server
    B: Contribute
    1. create a connection
    2. administer the website ( and create an admin password )
    3. set the proper settings for your users (administrators,
    publishers, writers), enable rollbacks
    4. create a connection key fot you user with the proper role
    and save that to disk
    C: Dreamweaver
    1. manage the site in dreamweaver
    2. enable contribute compatibility (this way files get
    checked in and out, so you know who is editing what)
    D:
    1. Sent the connection key to your user

  • Extract closed captions from OTA HD broadcast for use with DVD SP?

    Hi, I'm out of my league here, trying to do a favor for a deaf friend. He will appear on a national TV show, and I'd like to capture his appearance and (if possible) burn it to DVD.
    Of course, being deaf, he needs to see the closed captions.
    What I've done so far is buy Elgato's eyeTV Hybrid. I can successfully capture HD broadcasts with their embedded closed captions (wow, is that gorgeous!).
    I can use the eyeTV software to recompress the audio and video for DVD SP, but the captions don't end up anywhere that I can tell.
    Is there any way to extract the closed captioning information for use with DVD SP?
    Thanks very much.

    I don't think FCP will ever have captioning tools, due to it is a specilized area of post production and third party companies have developed captioning software that addresses this area.
    I use the only Mac captioning software, (Mac Caption, made by CPC) that runs on the Mac. The cost for the SD captioning version of Mac Caption retail cost $6,995 USD and the HD version is an additional $2000.00 USD. If your an educational institution, then the price is about half the list, (price can be negotiated with the company at the time of purchase.)
    As you can see, this is about half the cost of the FCP suite and I really don't think that Apple will ever get into this area. Most production companies rely on captioning services. In our case, we are an educational facility and therefore must comply with ferderal law, so we caption everything we do, thus why we had to purchase our own software.
    The software we use, can do what it is that you are seeking, it can read the caption data from a live video image an convert it to a .scc file, that can be then used in DVD authoring or tape production. It can also read the raster area of a 720x 486 video file and also convert the caption information to a .scc file, as well as creating subtitlilng .stl files for DVD's.
    It can also do original captioning, as well as add a text track to QT streaming files, which is how you caption QT steraming files. You can even burn captions into the video image of a steaming file.
    Again, most production facilities are going to have to rely on a captioning service, but because we have to caption everything, and most captioning services don't caption QT streaming files, this was another reason we had to purchase our own captioning software.

  • [Oracle JDBC Driver]This driver is locked for use with embedded application

    Hi
    I installed Sun Java Studio Enterprise 8, and am trying to connect to my Oracle database using the attached tutorial code.
    The code compiles fine, but I get the following error whenever I run the file: [Oracle JDBC Driver]This driver is locked for use with embedded application
    I don't understand what is happening.
    Using the Runtime navigation panel on the upper left of the IDE screen, I can right-click and connect to the database, and navigate database files, using the Oracle JDBC Driver that came with JSE8.
    Name: Oracle Driver
    Driver: com.sun.sql.jdbc.oracle.OracleDriver
    Database URL: jdbc:sun:oracle://JAZZPUP:1521;SID=REPO
    If the driver is installed, and can be used to connect to a database by right-clicking on the database definition in the Runtime panel, why can't I connect to it just using java code in the IDE. I would expect both methods to work or to fail, not one of each using the same IDE.
    Many thanks and take care,
    Shayne
    import java.sql.*;
    public class CreateCoffees {
    public static void main(String args[]) {
    //String url = "jdbc:mySubprotocol:myDataSource";
    String url = "jdbc:sun:oracle://JAZZPUP:1521;SID=REPO";
    Connection con;
    String createString;
    createString = "create table COFFEES " +
    "(COF_NAME VARCHAR(32), " +
    "SUP_ID INTEGER, " +
    "PRICE FLOAT, " +
    "SALES INTEGER, " +
    "TOTAL INTEGER)";
    Statement stmt;
    try {
    //Class.forName("myDriver.ClassName");
    Class.forName("com.sun.sql.jdbc.oracle.OracleDriver");
    } catch(java.lang.ClassNotFoundException e) {
    System.err.print("ClassNotFoundException: ");
    System.err.println(e.getMessage());
    try {
    //con = DriverManager.getConnection(url, "myLogin", "myPassword");
    con = DriverManager.getConnection(url, "login", "password");
    stmt = con.createStatement();
    stmt.executeUpdate(createString);
    stmt.close();
    con.close();
    } catch(SQLException ex) {
    System.err.println("SQLException: " + ex.getMessage());
    } //end class CreateCoffees
    ---

    There are two similar threads:
    http://swforum.sun.com/jive/thread.jspa?threadID=61327&tstart=0
    http://swforum.sun.com/jive/thread.jspa?threadID=51057&messageID=188210
    To summarize - the DataDirectDriver that is shipped with the IDE seems to be locked to be used inside the IDE only because of some licensing issues etc..
    That's weird, I agree. I will raise a question on reasons for such a behavior.
    The solution would be to use Oracle's own driver, that is distributed at no charge from their web site - http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/index.html
    HTH,
    Kirill

  • What is the best software to use for screen capture on a PC for use with FCPX?

    What is the best software to use for screen capture on a PC (windows 7) for use with FCPX? I've tried Camtasia and camstudio however the avi files cannot be imported by FCPX and the mov files produced by these programs are shown as just black screens in FCPX.

    I use to face this issue every now and then (as a freelancer) when I use to cut on FCP7.
    if the material is DV and was captured using Sony VEGAS, Premiere or Edius, the footage generally worked fine. You'll find most people will tell you to convert it regardless, however I found no issues working with them.
    A problem you'll definitely face is HDV material. Most PC editing software write HDV in their own codec, which can't be read in FCP.
    The only thing I can think of is to try converting HDV meaterial to QuickTime using something like MPEG Streamclip, or something similar.
    Good luck

  • User's default email address for use with Answers

    How to use user's default email address for use with Answers?
    When I was referring to the Admin Guide I found the below description for email session variable.
    Can somebody please help me with this.
    Contains the user's default email address for use with Answers. If the delivery option of Answers is enabled, an email device using this address will be created for the user upon first log in. Users can override this address by changing their account settings in Oracle BI Presentation Services.
    Thanks,
    Swetha

    I think the documentation is wrongly saying that it will be used by Answers. The email will be used by Delivers, the BI Scheduler component.

  • ISetup for use with Oracle Incentive Compensation (OIC)

    I have read conflicting reports as to whether or not iSetup would be available for use to migrate Compensation Plans (and all other OIC configurations) across instances of Oracle Apps eBusiness.
    Does anyone know if R12 (12.04) is capable of handling OIC migrations? Is there any documentation available as to how one would configure iSetup for use with OIC?
    Thanks in advance.

    Hi,
    This is Mugunthan from iSetup development. OIC is not covered as a part of standard selection sets shipped by Oracle. You may consider logging a SR (product code - 841) to get the coverage.
    If you already have java program/scripts that migrate OIC, then you can plugin them with iSetup. You can also write your own BC4J APIs for migration of OIC setups and register with iSetup.
    To know more about writing BC4J iSetup Fwk APIs, please log a SR.

  • [svn] 2569: Adding [HostComponent] metadata functionality for use with Gumbonent skins to provide a

    Revision: 2569
    Author: [email protected]
    Date: 2008-07-22 13:55:02 -0700 (Tue, 22 Jul 2008)
    Log Message:
    Adding [HostComponent] metadata functionality for use with Gumbonent skins to provide a
    strongly typed reference (hostComponent) back to the owning component, automagically.
    Reviewer: Paul (Compiler), Ryan (SDK)
    QA: Yes
    Modified Paths:
    flex/sdk/trunk/development/eclipse/flex/flex4/.actionScriptProperties
    flex/sdk/trunk/frameworks/projects/flex4/build.xml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/SkinnableComponent.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ApplicationSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/CheckBoxSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/HScrollBarSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/HScrollBarThumbSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/HScrollBarTrackSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/HSliderSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/HSliderThumbSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/HSliderTrackSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ItemsComponentSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ListSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/PanelSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/RadioButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ScrollBarDownButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ScrollBarLeftButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ScrollBarRightButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ScrollBarUpButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/SelectorSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/SpinnerDecrButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/SpinnerIncrButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/SpinnerSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/TextAreaSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/TextInputSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/ToggleButtonSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/VScrollBarSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/VScrollBarThumbSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/VScrollBarTrackSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/VSliderSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/VSliderThumbSkin.mxml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/skin/VSliderTrackSkin.mxml
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilationUnit.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/SyntaxTreeEvaluator.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/ImplementationCompiler.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/lang/StandardDefs.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler_en.properties
    Added Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/HostComponentEvaluator.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/HostComponentExtension.java

    Try assigning a rollover to each conatiner mc as it is created...
    scrollerBase["imageHolder" + i].onRollOver = function(){
          trace("SUCCESS");

  • SCUP catalogs for use with SCCM

    Hi!
    I was wondering if there are any other available SCUP catalogs that are not listed here
    http://technet.microsoft.com/en-us/systemcenter/cm/bb892875.aspx
    Like for example Java, Adobe Reader, Flash? Or do I need to publish my own updates? What is the best way to go about patching for example java on servers?

    IMO you should chase SUN, Adobe, etc and get them to create the catalog themselves! It is ridicules that the catalog don’t already exist!
    So you need to complain to them otherwise they will never do it! If you know complain about it then why should they do it?
    http://www.enhansoft.com/
    Well, if you register (At Adobes site) for distributing Adobes software, they will send you a link,not only to the software, but also to the catalog for use with SCUP.
    Eg:
    http://fpdownload.adobe.com/get/flashplayer/current/licensing/win/AdobeFlashPlayerCatalog_SCUP.cab
    How to do it? Look here:
    http://www.adobe.com/licensing/distribution/strategies/sms.html

  • HT204149 What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

    What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

    Hey guys,
    I found out an answer by myself...
    The missing link : the MacBook Pro needs to be powered... as in you need to plug the charger in...
    In conclusion, you simply plug everything, turn on the MacBook Pro, close the lid, and there you go !

  • How do I do this to use OVerdrive media on deviceThe Apple device must be formatted for use with Microsoft Windows.  The iTunes setting 'Manually manage music-' must be enabled for the device before you can complete the transfer.

    I cannot make these directions work
    I downloaded media on Overdrive MEdia on my PC
    I have the overdrive media ap on my I pod touch 4g
    this media is suppossed to be compatible w/I pd touch
    Notes on Transferring OverDrive MP3 Audiobooks…
    Most MP3 capable devices should play OverDrive MP3 Audiobooks.
    If you intend to transfer OverDrive MP3 Audiobooks to an Apple® device, note the following…
    iTunes® v9.0.2 (or newer) is required.
    The Apple device must be formatted for use with Microsoft® Windows®.
    The iTunes setting 'Manually manage music…' must be enabled for the device before you can complete the transfer. Adjust this setting in iTunes as follows…
    Connect the iPod® to your computer.
    If it does not launch automatically, open iTunes v9.0.2 (or newer).
    In iTunes, locate the device in the left vertical navigation panel (under heading 'DEVICES'), and click the device.
    The 'Summary' screen is displayed. 
    Place a checkmark next to 'Manually manage music…'.
    Click the 'Apply' button.
    The iTunes 'Summary' screen refreshes, and the changes are saved.
    If desired, close iTunes.
    Note that if an Apple device is connected to your computer, you can choose to simultaneously transfer a title to the iTunes Library and the Apple device. If you wish to only transfer a title to the iTunes Library, you must first disconnect the Apple device

    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
    Also you said " I want to add them to my iCloud, and also back to my computer.   " Note that unless  subscribe to iTunes match, only iTunes purchases are stored in iCloud.
    Also,
    You can redownload most iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

    I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc.  But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

    You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
    http://www.macupdate.com/app/mac/24481/ntfs-3g
    If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

  • I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID

    I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID?
    The apple ID was his personal account and can no longer gain access. Im sure I can get purchase recipts from the accounting department if needed. I tried to put the Ipad in restore mode and used itunes to "recover" the ipad but it still wont let me in because he registered the device with the "lost iphone" feature or whatever that is.

    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818
    The Apple ID and Password that was Originally used to Activate the iDevice is required
    If you do not have that information you will not be able to use the Device.

Maybe you are looking for