CSM does not show rule numbers when using sections?

I started using sections in access rules within CSM 4.2 but all the rules that are within these section do not show anymore the rule number in the list.
Can this be changed? Is this a bug?

The numbers are shown, but you have to expand the column. Somehow cisco makes the no. column to small to see the numbers in a section by default. And they replace the numbers with a dot or two as soon as it is too small to display the numbers.

Similar Messages

IPhone 6 does not show in iTunes when using WiFi

My iPhone 6+ shows up in iTunes when connected via USB. But if I disconnect the cable and turn off iTunes and then come back later it does not show up like my iPhone 5 did using OS 7.
I have the option selected in iTunes to "automatically connect using WiFi".
I have tried turning off my phone and restarting iTunes but it does not help.
Any suggestions?

Greetings Paul,
It sounds as though you are attempting to sync with iTunes via WiFi, and are running into some complications. After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iTunes WiFi sync:
Sync using Wi-Fi
Open iTunes
To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable.
Click the Device button in the upper-right corner. (If viewing the iTunes Store, click the Library button first.) If you don't see your device, choose View > Hide Sidebar.
In the Summary tab, select "Sync with this [device] over Wi-Fi."
When the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it. The iOS device will sync automatically when the following conditions are true:
The iOS device is charging.
iTunes is open on the computer.
The iOS device and the computer are on the same Wi-Fi network.
While the iOS device is in the left-hand column of iTunes, you can select the content tabs and configure sync options.
Click Apply or Sync to sync the iOS device.
If the iOS device doesn't appear in the Devices section or you can't sync, please try these steps.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature, the photo is there. Why doesn't it show up in the folder?

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature the picture is there. Why doesn't it show up in the folder?

What system and iPhoto version are you running?
If your're using iPhoto 9 or later Command (right) - click on the photo in the search window and select Show Event in the Contextual menu.
That will take you to the event where the photo is.
OT

I have downloaded latest itunes but my ipad does not show in devices when I try to sync. Any suggestions?

I have just gotten my new ipad!!! I downloaded latest version of itunes but my ipad does not show in devices when I try to sync music. Any suggestions??

Does a little box come up seeing the iPad as a camera? That doesn't impact iTunes as much as it confirms that your computer sees the device. If your computer doesn't see it then iTunes doesn't know it's there.
If you're plugged into a hub or extender, try plugging it directly into the box or main part of your computer.
If you're using an extension, stop and just use the included sync cable.
Try using a different USB port.
After you installed iTunes, did you restart your computer?
Usually what's needed is the 'apple device driver' which installs automatically, you just need to sometimes trigger the install, using different ports helps with that.
If the simple trouble shooting doesn't help then you can search on the Apple Device Driver and there's more detailed trouble shooting on the site.

Itunes store does not show on ipad when i launch app its pages are blank

itunes store does not show on ipad when i launch app its pages are blank

This indicates there might be an issue with the time configuration on the device.
Go to Settings > General > Date and time. See if Set automatically is switched to on. If so, switch to off and ensure you set date, time and time zone manually and correctly.
Power off the device (hold sleep button for four seconds, then slide to power off), then power back on.
If issue persists, switch Set automatically back to on, and if not resolved then restore the device.

HT201317 My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.

My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.I reinstalled my icloud and checked if icloud sharing is ON. I can see pic in my photo stream in PC only in slide show mode. While in list mode it shows pics before i actually click on photostream folder. My phone memory is out becose of bunch of photoes. How do i copy my photostream photoes.

Hi all. I can’t tell you how to solve your iCloud 3.x issues. Heck, I don’t think they’re even solvable.
But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem. …without even a re-boot.
Log out of iCloud 3.0 and uninstall it.
Open My Computer and then open your C:\ drive. Go to Tools/Folder Options and click on the View tab. Select the “Show hidden…” radio button and click on OK.
Open the Users folder.
Open your user folder
Open ProgramData (previously hidden folder)
Open the Apple folder – not the Apple Computer folder.
Open the Installer Cache folder
In Details view sort on Name
Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
Right click on iCloud64.msi and select Install.
When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco. The pictures will be synched to the same Photostream folder as before the “upgrade”. Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
For those of you who hate to go backwards, think of it as attacking to the rear. Which would you rather have, the frustration of no synching or everything working on an older version?
Good luck…

Playlist after being imported to tablet does not show track numbers?

After importing playlist in itunes to my tablet, it does not show sequential numbering of tracks? It would make it easier for me to id the numberical order of tracks?

If the movie clip is there, but no thumbnails, I would suggest that you delete the thumbnails, cache, and analysis folders but take care not to delete your original clips. Do this in the Finder after shutting down iMovie.
Then restart iMovie and let it regenerate the thumbnails. Let it run until it finishes.

My Ipod does not show in Itunes, when I connect it shows for a second a disappears again, I have gone through the trouble shooting but no luck?

My Ipod does not show in Itunes, when I connect it shows for a second a disappears again, I have gone through the trouble shooting but no luck?

:-) the problem is solved. Thanks to a great typ in one of the other discussions with alt+cmd+S iTunes looks again like something I recognize. After removing the iPod from iMac and also from the connecting "holder", turning it on ad off, rebooting the iMac, maggic happens and the iPod now shows in iTunes and everything works just fine.

Stock widget does not show any numbers

The stock widget does not show any numbers. I tried relacing the widget, just the same, no numbers

Try restarting your Mac.

Ipod 1 Gen does not show in itune when others will

Ipod 1 Gen does not show in itune when others will

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

Msi x99 gaming 9 ack does not detect capture card when using with xsplit

msi x99 gaming 9 ack does not detect capture card when using with xsplit
i install every but still it does not work.

Hi
It wasn't hard to find your motherboard version:
http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
Since your BIOS is v20.1, it couldn't be G3
Apart from checking BIOS, you can only check motherboard or moth...

Approved App Does Not Show in the App Part Section.

Hi all,
I have successfully add an App from the SharePoint App Store to my SharePoint Site which was developed using SharePoint 2013. The added app was successfully Approved then when I try to add that app using the App Part to a web page I cannot Find it
in the App Part section. I looked in the Site Collection Features & Site Features I couldn't find the app to activate. I don't think I have done some kind of mistake. So then what else I have to do to add that App part to the web page.
Could someone try to solve this matter?
Thanks,
Regards,
Chiranthaka

Ok I found the solution from another thread & it is at the below!
Cannot Add
Approved App To A Web Page - App Does Not Show in the App Part Section.

Why does a new episode of a already bought TV Show Season does not show up in my purchased section right away?

Why does a new episode of a already bought TV show season does not show up in my purchased section right away? So I can watch it on my iPhone via Wi-Fi.

Same problem here!!! It look like it is same problem everywhere!
Updated Apple TV yesterday, purchased 4th episodes of Good Wife and after watching it dissapear! Wanted today to watch again, it is in the list but needed to buy again! After trying couple of time alternatives I buy it again and same thing happened!! If I want to watch again I need to buy it! Again!!
First three episodes witch I buy under old operating system are there and there are no any problem with them!
Did Apple start charging per view??
It start to looking like Windows! Repair one thing but ruin 10 good other things with every update!!
Does somebody have solution?. Thanks in advance!!

Adobe Illustrator CS5 does not show PDF thumbnails when browsing

When I am browsing through PDF files to open one of them in Adobe Illustrator CS5 it does not show the thumbnail. When I am browsing in Adobe Acrobat it does show the thumbnails. If I have Adobe Acrobat open and am browsing through files and the thumbnails are showing then if I open Adobe Illustrator and browse for a file the thumbnail does show up.
How can I get Illustrator to always show the PDF thumbnails. I have to frequently browse through thousands of PDF files and it is imperative that I can see the thumbnail for these PDF files. I primarily use Illustrator to edit PDF files.
The computer is Windows 7 Enterprise 64 bit edition. Thumbnails barely work when browsing files through Explorer. Some thumbnails will show, but not very many of them and it is extremely slow to load the thumbnails that will display.

Bob,
So I am assuming you are talking about viewing the files using this method first:
To use the 32-bit version of Windows Explorer, follow these steps:
Click Start, click Run, type the following in the Open box, and then click OK:
Drive_Letter:\windows\syswow64\explorer.exe /separate
Note The placeholder Drive_Letter represents the drive where the x64-based version of Windows is installed.
Please let me know if I am missing what you are saying here.

Af:statusIndicator does not show busy icon when a command button is click

Hi Guys,
af:statusIndicator does not show busy icon or motion when a command button is click
I am working on an excel data upload functionality on .jspx page. I use “af:inputFile” file uploader to upload an excel file then process the data and store it as a list of objects in memory and display it in “af:table” table
I added “af:statusIndicator” to the page to show the user that the page is progressing while the data is uploading and when it is saving the data to the database.
In this case, when the “af:inputFile” is clicked to upload the excel file - the status indicator shows a progress icon (movement) which is expected and is good. However, after the data have been display in the table when I click on a command button that saves the data to the database – I expected the status indicator to start its busy motion but that is not happening. Whereas, the command button grayed out and is disable when I clicked the button until the operation is completed.
Is there any way to start the statusIndicator when a command button is clicked?
I tried the following options
*<af:statusIndicator id="si1_uploadStatus" partialTriggers="pc1:cb1 pc1:table"/>*
Where pc1:cb1 is the command button and pc1:table is the table
*<af:commandButton text="Submit Uploads" id="cb1"*
*disabled="#{!viewScope.batchUploadController.allSavable}"*
*partialTriggers="::infFilePath"*
*action="#{viewScope.batchUploadController.saveUploadedData}"*
*blocking="true"/>*
Thanks,

Can somebody please address this?
Thanks,

CSM does not show rule numbers when using sections?

Similar Messages

Maybe you are looking for